Engineering Commons^™

A Review Of Baobab (Adansonia Digitata) Products: Effect Of Processing Techniques, Medicinal Properties And Uses, Donatien Kabore, Hagrétou Sawadogo-Lingani, Bréhima Diawara, Clarise Compaoré, Mamoudou H. Dicko Prof., Mogens Jacobsen

Pr. Mamoudou H. DICKO, PhD

A general literature review including the effect of processing techniques, medicinal value and uses of baobab tree is reported in this manuscript. Baobab tree has multi-purpose uses, as it produces food and non-food products such as medicines, fuel, timber, fodder. Every part of the baobab tree is reported to be useful. The seeds, leaves, roots, flowers, fruit pulp and bark of baobab are edible. Baobab leaves are used in the preparation of soup. Seeds are used as a thickening agent in soups, but they can be fermented and used as a flavouring agent or roasted and eaten as snacks. The …

The Importance Of Project Management In Smes For The Development Of New Products Through E-Collaboration, Marjan Mohammadjafari, Shamsuddin Ahmed, Siti Zawiah Md Dawal, Hadi Zayandehroodi

Dr. Marjan Mohammadjafari

The research in this paper seeks ways for manufacturing companies to accomplish projects in real time with less cost. This paper describes a new model using critical success factors of implementing projects in small- and medium-sized enterprises (SMEs). The factors in the conceptual model were identified in past studies and are validated from interviews with 20 project managers in the electronics industry in Iran. Several prior researches have suggested critical success factors for reducing time and cost in the development of a new product. These factors are related to design, product, planning and procurement. However, none of these studies has …

Graduate Faculty Workloads: Recognizing Scholarship And Student Engagement At The Comprehensive Institution, Mark Doggett

Mark Doggett

No abstract provided.

Toward A Technology Management Core: Defining What The Technology Manager Needs To Know, Mark Doggett, Pam Mcgee, Sophia Scott

Mark Doggett

No abstract provided.

Developing System Architecture Design Using Qfd, Raman Attri

Raman K. Attri

Using QFD tool to flow down the reqeuirements and develop the top-down systems architecture during product development

Improving The Polymer Injection Manufacturing Process By Using Quality Engineering Methodology, Dotan I. Shvorin

Dotan Shvorin

Using quality engineering tools and methodologies are proven to be the back bone of a successful organization. Yet, they present challenges to engineers because in order to use them correctly the engineer needs to rely on his own analysis. From his findings, the engineer would be able to determine the location and the purpose for each unique quality tool or methodology. This paper presents a quality engineered methodology usage in the polymer injection manufacturing process in order to minimize the manufacturing process defects.

A Review Of International Best Practice In E-Governmentsome Lessons For New Adopters, Deogratias Harorimana Sr

Dr Deogratias Harorimana

Efficient bureaucratic processes as essential to attract and retain investment, as well as promote SME growth. The e_Gov is one of many ways emerging economies have used to streamline public service delivery and create a freindly and conducive atmosphere for business -both MNC and SMEs. This presentation provide an overview of some of the World's most recent case examples on the successful design-plan-implementation of eGov to build a strong basis to attract investment and deliver seamless essential services to Citizens.

Rethinking Advising: Developing A Proactive Culture To Improve Retention, Amber Settle, John Glatz

Amber Settle

A Critical Review Of The Effectiveness Of Fiscal And Monetary Policies In The Pacific Island Countries (Pics) Between 1990-2010, Deogratias Harorimana Mr

Dr Deogratias Harorimana

The purpose of this paper is to critically assess the effectiveness of Fiscal and Monetary Policies in the South Pacific Island Countries. The paper tracks down the economic growth for the last 20 years between 1990-2010, and drawing from key fiscal and monetary policies in place during the time under consideration, as well as specific interventions in the region, we find that: 1) While the South Pacific Island Countries (SPICs) particularly the six major economies (Solomon Islands, Fiji, Vanuatu, PNG, Samoa, Tonga) pursued fiscal and monetary policies for promoting growth and diversification of their economies, their fiscal policies relied heavily …

Issues In Human Capital Development : Lessons For Public Administration And Governance, Deogratias Harorimana Mr

Dr Deogratias Harorimana

With few minerals or other natural resources, Rwanda believes that she can still achieve her ambitions by investing in human capital - her unique resource. If this ambition can be achieved, then is this the next role model for international development? We used a case study design and analysis methods to examine development models used elsewhere in recent decades, using both qualitative and quantitative data on Rwanda to establish the comparative advantages in relation to Singapore’s economic development model. The implications for international development are that (1) an effective human capital development strategy should be inclusive enough to respond to …

Effect Of Gold Content On The Reliability Of Snagcu Solder Joints, Jianbiao Pan, J. Silk, M. Powers, P. Hyland

Jianbiao Pan

Electroplated Ni/Au over Cu is a popular metallization for printed circuit board finish as well as for component leads, especially wire-bondable high-frequency packages, where the gold thickness requirement for wire bonding is high. The general understanding is that less than 3 wt% of Au is acceptable in SnPb solder joints. However, little is known about the effect of Au content on the reliability of SnAgCu solder joints. The purpose of this paper is to determine the acceptable level of Au in SAC305 solder joints. Three different package platforms with different Au thicknesses were assembled on boards with two different Au …

Collaboration Tools For Education - "Learn And Teach Online”, Nader Ale Ebrahim

Nader Ale Ebrahim

No abstract provided.

Evaluation Of A Shared Representation To Support Collaborative, Distributed, Coalition, Multilevel Planning, Michael C. Dorneich, David Mott, Ali Bahrami, Jitu Patel, Cheryl Giammanco

Michael C. Dorneich

This paper presents the extension and evaluation of a formal representation that enables planners at different levels of command, and in different functional area, to jointly share, develop, and modify plans. Planning has moved from a co-located, concurrent, small team activity to an activity that involves a large, culturally diverse, hierarchical, globally-distributed team. However, significant benefits of distributed planning can only come if the team is able to communicate and maintain a shared understanding of the commander’s intent, objectives, resources and constraints, as well as decisions made and justifications for planning options chosen or alternatives rejected. Effective automated support must …

Impulsive Displacement Of A Liquid In A Pipe At High Reynolds Numbers, Gerald G. Kleinstein

Gerald G. Kleinstein

We consider the problem of an impulsive displacement of a liquid, originally at rest in a circular pipe, which is displaced by another liquid. The purpose of this analysis is to show that at a sufficiently high inertia the initial essentially inviscid motion can be extended to cover the entire displacement process, thus creating an inviscid window to which an inviscid analysis can be applied. We simplify the problem first, by considering a 1-liquid problem where the displacing liquid and displaced liquid are the same. We identify two characteristic times in this problem: the time it takes an inviscid liquid …

Assessment System Based On Fuzzy Scoring In European Foundation For Quality Management (Efqm) Business Excellence Model, J Dodangeh

Javad Dodangeh

There are a few popular business excellence models that provide standard criteria against which an organization can measure its performances. European Foundation for Quality Management (EFQM) is the most popular one. The organizational self-assessment process is an admissible system in the area of Total Quality Management (TQM). Most specialists concur to the description of self-assessment that is presented by the European Foundation for Quality Management (EFQM). However, the current selfassessment methods in EFQM model have some drawbacks and problems which are scoring in these methods influenced by experts’ judgment and thus, are subjective. Furthermore, these methods cannot consider the empirical …

Optimization Of Supply Chain Planning With Considering Defective Rates Of Products In Each Echelon, Behin Elahi

Behin Elahi

Supply Chain Planning has recently received considerable attention in both academia and industry. The major targets of supply chain planning are to reduce production costs, risks, delays and maximize or improve profit, quality of product, customer service which result in increased competitiveness, more customer satisfaction and portability. In this study, a new bi-objective mathematical modeling for a four-echelon supply chain, consisting multi-supplier, assembler, distribution center and retailer, with considering the defective rates of products is proposed. Then, fuzzy compromise programming method is applied to solve the non-linear mixed-integer bi-objective model. Finally, a numerical example is given to illustrate application of …

A Conceptual Model For Creating A Favorable Environment To Reduce The Production Time And Cost Of Production By E_Collaboration, Marjan Mohammadjafari, Shamsuddin Ahmed, Siti Zawiah Md Dawal, Hadi Zayandehroodi

Dr. Marjan Mohammadjafari

The companies need to the implementation the projects on time within budget for achievement the success and competitive in the market. The prior researcher illustrated many method and model for development time in new product. For this purpose, in this research the author created a new model and allegation the electronic collaboration (E_collaboration) by a project manager can create a favorable environment to reduce the production time and cost of production of new product. This model is composed of four construct: design, planning, procurement and production. For initially evaluated the model the author has done interview with 20 project managers …

Reducing Time And Cost Of New Product Development In Smes By E-Collaboration Through Project Management Approach, Marjan Mohammadjafari, Shamsuddin Ahmed, Siti Zawiah Md Dawal, Hadi Zayandehroodi

Dr. Marjan Mohammadjafari

One of the most serious bottlenecks in many small and medium enterprises (SMEs) is the long time required for new product development. Most SME manufacturing companies have realized that they cannot compete, unless they their shorten product development cycle times. At the same time, the rapid evolution of Web-based technologies and knowledge of project management has revolutionized the product development process. Through the literature review and real world insights, this paper proposes a conceptual model and a series of hypotheses. The model integrates departments of design, planning, production and procurement in the company via project management with electronic collaboration (E-collaboration) …

Design, Modeling And Control Strategy Of Pv/Fc Hybrid Power System, Dr. Adel A. Elbaset

Dr. Adel A. Elbaset

This paper describes development of a general methodology of an autonomous PV/FC system composed of photovoltaic (PV), electrolyzer, hydrogen storage tank and fuel cell (FC). The aim of this paper is to determine optimum design, control strategy, economic and performance of a PV/FC hybrid power generation system without battery storage taking into account all losses in the system. The paper also presents a computer program based on Matlab software to determine optimum design, control strategy, economic and performance of an autonomous PV/FC hybrid power generation system. The computer program develops to size system components in order to match the load …

Managing Communication In New Product Development Process: Virtual R&D Teams And Information Technology, Nader Ale Ebrahim, Shamsuddin Ahmed, Salwa Hanim Abdul Rashid, Zahari Taha

Nader Ale Ebrahim

Literature proves the importance of the role of information technology in increasing the effectiveness of virtual R&D teams’ communication for new product development. However, the factors that make information technology construct in a virtual R&D team are still ambiguous. Managers of virtual R&D teams for new product development do not know “which type of technology should be used”. To address the gap and answer the question, the paper presents a set of factors that make a construct that contribute to effective communication strategy for virtual R&D teams. The proposed construct has been modified based on the findings of a field …

Magnetic And Microwave Properties Of Ion-Beam-Sputtered Amorphous Feₓco₈₀₋ₓb₁₅Si₅ Films, V. G. Harris, S. A. Oliver, W. B. Nowak, C. Vittoria

Carmine Vittoria

Magnetically soft amorphous films of FeₓCo₈₀₋ₓB₁₅Si₅ (x = 0, 6, 23, 40, 70, 80) were ion beam sputter deposited onto fused quartz for static and microwave magnetic characterization. Films ranged in thickness from 220 to 260 nm and were deposited at rates of 0.1-0.2 nm/s. Saturation magnetization, coercivity, and loop squareness values were extracted from hysteresis loops generated by a vibrating sample magnetometer. Ferromagnetic resonance measurements were taken using a 9.5-GHz cavity with the applied magnetic field both parallel and perpendicular to the plane of the film, yielding values for the g factor, anisotropy field, effective magnetization, and linewidth. Well …

Structural And Magnetic Characterization Of Amorphous Gd₂Fe₁₄B Thin Films, S. E. Bushnell, P. C. Dorsey, W. B. Nowak, C. Vittoria

Carmine Vittoria

Thin amorphous films of nominal composition Gd₂Fe₁₄B were fabricated on Si (100) substrates using ion‐beam sputtering for the purpose of establishing their structural and magnetic properties at room temperature. X‐ray‐diffraction scans performed on as‐deposited and annealed films revealed an amorphous structure. The as‐deposited saturation magnetization was found to be 8101 G at room temperature suggesting ferrimagnetic ordering with anti‐parallel coupling similar to other heavy rare earth‐transition metal systems. Results from in‐plane and perpendicular ferromagnetic resonance experiments conducted at 9.108 GHz showed the films to be inhomogeneous. This was evident from the presence of two in‐plane resonance lines and spin‐wave spectra …

The Measurement Of Magnetostriction Constants Of Thin Films Using Planar Microwave Devices And Ferromagnetic Resonance, S. E. Bushnell, W. B. Nowak, S. A. Oliver, C. Vittoria

Carmine Vittoria

In this paper we introduce a new technique for measuring the saturation magnetostriction constant (λs) for isotropic polycrystalline thin films. The technique makes use of nonresonant planar microwave structures together with a novel stressing mechanism to induce a shift in the resonant field of a magnetic thin film as measured by a ferromagnetic resonance (FMR) experiment. Measurement of the shift induced by a uniaxial stress allows for determination of λs via a magnetic resonance analysis. Either a slotline device or coplanar waveguide (CPW) was used as the source of the microwave excitation field depending upon the orientation of the dc …

Effects Of Boron Implantation In Films Of Iron-Nickel, J. Ryu, K. Castell, W. Nowak, C. Vittoria

Carmine Vittoria

We have implanted boron ions into films of Fe-Ni alloy composition. A homogeneous distribution of boron was determined from the sputter Auger analysis with a concentration of 18% and 34% for low- and high-dose implantation, respectively. The resistivity of film was increased by a factor of 2 and 4 as a result of low- and high-dose implantation, respectively. The magnetic properties of these films are studied as a function of annealing temperature by using FMR measurements. Both the uniaxial anisotropy field and FMR linewidth are dramatically decreased as a result of annealing at elevated temperatures. The changes of effective magnetization …

Magnetic And Structural Investigation Of Heat Treated Ion Beam Sputtered Amorphous Co₇₄Fe₆B₁₅Si₅ Films, V. G. Harris, S. A. Oliver, W. B. Nowak, C. Vittoria, R. J. Culbertson, W. T. Elam, K. H. Kim

Carmine Vittoria

As-deposited and annealed specimens of ion beam sputtered amorphous Co₇₄Fe₆B₁₅Si₅ thin films were examined to explore the correlation between changes in magnetic properties and atomic structure. Specimens were characterized magnetically, by traditional ac and dc techniques and structurally, via conversion-electron extended x-ray absorption fine structure analysis. Results show significant ordering of the higher order atomic shells around the transition metal ions well below the crystallization temperature. This ordering evolves into a body- centered-cubic configuration around both the Co and Fe ions. Increases in nearest neighbor peak positions in the EXAFS Fourier transforms were observed to correlate with increasing annealing temperatures. …

Designing Fuzzy Multi Criteria Decision Making Model For Best Selection Of Areas For Improvement In Efqm, J Dodangeh

Javad Dodangeh

In a growingly competitive business environment, numerous organizations adopt the total quality management (TQM) approach, to struggle for business excellence. To monitor the progress towards business excellence, thousands of organizations across the world use self-assessment on a regular basis. There are a few popular business excellence models, that provide standard criteria against which an organization can measure its performances. European Foundation for Quality Management (EFQM) is the most popular ones. The EFQM Excellence Model was introduced at the beginning of 1992, as the framework for assessing organizations for the European Quality Award. It is now the most widely used organizational …

Investigation Of Electrical Transport In Hydrogenated Multiwalled Carbon Nanotubes, Adam L. Friedman, Hyunkyung Chun, Don Heiman, Yung Joon Jung, Latika Menon

Yung Joon Jung

Highly disordered multiwalled carbon nanotubes of large outer diameter (~60 nm) fabricated by means of chemical vapor deposition process inside porous alumina templates exhibit ferromagnetism when annealed in a H2/Ar atmosphere. In the presence of an applied magnetic field, there is a transition from positive to negative magnetoresistance. The transition may be explained in terms of the Bright model for ordered and disordered carbon structures. Additionally, temperature dependent electrical transport experiments exhibit a zero-bias anomaly at low temperature.

Investigation Of Electrical Transport In Hydrogenated Multiwalled Carbon Nanotubes, Adam Friedman, Hyunkyung Chun, Don Heiman, Yung Jung, Latika Menon

Latika Menon

Highly disordered multiwalled carbon nanotubes of large outer diameter (~60 nm) fabricated by means of chemical vapor deposition process inside porous alumina templates exhibit ferromagnetism when annealed in a H2/Ar atmosphere. In the presence of an applied magnetic field, there is a transition from positive to negative magnetoresistance. The transition may be explained in terms of the Bright model for ordered and disordered carbon structures. Additionally, temperature dependent electrical transport experiments exhibit a zero-bias anomaly at low temperature.

The Effectiveness Of Virtual R&D Teams In Smes: Experiences Of Malaysian Smes, Nader Ale Ebrahim, Salwa Hanim Abdul Rashid, Shamsuddin Ahmed, Zahari Taha

Nader Ale Ebrahim

The Effectiveness Of Multi-Stage Dehumidification– Humidification For Improving The Cooling Ability Of Evaporative Air Conditioning, Philadelphia University

Philadelphia University, Jordan

No abstract provided.