Engineering Commons^™

Properties And Applications Of Sensory Outcome Measures In Carpal Tunnel Syndrome, Derek Km Cheung

Electronic Thesis and Dissertation Repository

This thesis aimed to determine the psychometric properties and applications of sensory threshold tools and outcome measures in patients with Carpal Tunnel Syndrome (CTS). The first chapter is a psychometric study that defines clinically important difference (CID), construct validity and responsiveness of touch and vibration threshold tools and in the Symptoms Severity Scale (SSS). The study found the CID for the PSSD and for the SSS was 0.15g/mm² and 0.50 respectively. The study also found that the Vibrometer was more representative of hand function and responsive compared PSSD. The second objective of this thesis was to determine the feasibility …

Development Of A Novel Technique For Predicting Tumor Response In Adaptive Radiation Therapy, Rebecca Marie Seibert

Doctoral Dissertations

This dissertation concentrates on the introduction of Predictive Adaptive Radiation Therapy (PART) as a potential method to improve cancer treatment. PART is a novel technique that utilizes volumetric image-guided radiation therapy treatment (IGRT) data to actively predict the tumor response to therapy and estimate clinical outcomes during the course of treatment. To implement PART, a patient database containing IGRT image data for 40 lesions obtained from patients who were imaged and treated with helical tomotherapy was constructed. The data was then modeled using locally weighted regression. This model predicts future tumor volumes and masses and the associated confidence intervals based …

Optimization Of Chiral Separation Of Nadolol By Simulated Moving Bed Technology, Nesma Nehad Hashem

Electronic Thesis and Dissertation Repository

Simulated Moving Bed (SMB) technology has gained increasing attention as one of the most powerful techniques for chromatographic separations due to its cost-effectiveness and efficiency. Application of SMB technology is especially important in the pharmaceutical industry for production of enantiopure drugs, as required under strict FDA regulations, to avoid possible adverse effects of racemic drugs. In this study, the performance of the SMB process in separation of racemic nadolol on a perphenyl carbamoylated beta cyclodextrin (β-CD) stationary phase was investigated. The equilibrium dispersive model coupled with bi-Langmuir adsorption isotherm and lumped kinetic approximation, constitute the mathematical model used to simulate …

The Design And Testing Of A Solar Autoclave With Broad Spectrum Sterilization Capabilities, Sarah S. Trabia

Honors College Theses

Energy is difficult to come by in developing countries and this interferes with the ability of doctors to provide good healthcare to their patients. Without decent sterilization, patients can become infected and diseases can spread throughout hospitals. This study involves designing a solar autoclave for developing countries that is as efficient as electrical autoclaves. The design is intended to not require any electrical input and to be affordable to those who cannot afford advanced medical equipment. Once the solar autoclave is designed, it will be tested to determine if it can sterilize equipment against a variety of different bacteria, including …

Real-Time Analysis Of Brain Tumor Cell Dynamics: Novel Thermoelectric Detection Of L-Glutamate And Cell Metabolism Using Microfluidics, Siva Mahesh Tangutooru

Doctoral Dissertations

This study describes the design, fabrication and applications of a novel thermoelectric microfluidic bio-sensor. The bio-sensor is used for real time detection of the L-glutamate (L-glu) dynamics and metabolism for brain tumor cells immobilized in a microfluidic device. The microfluidic device is fabricated using a polymer/glass laminating technique (Xurography). An antimony-bismuth thin-film thermopile (primary sensing element) is integrated to the microfluidic device. The brain tumor cells are immobilized over the thermopile covering measuring and reference junctions of the thermopile using a poly-l-lysine coating layer. L-glutamate oxidase (L-GLOD) is immobilized over the measuring junctions of the thermopile prior to the immobilization …

The Factors Behind A Successful Implementation Of Electronic Health Records Systems, Anjee Gorkhali

Engineering Management & Systems Engineering Theses & Dissertations

This research explores the role that budget for Information System (IS) and technical expertise of healthcare service provider staff play on the successful leap from a partial to exhaustive implementation of Electronic Health Records (EHR) Systems. Technical expertise in Information Systems might not be easily measurable directly, but there are a number of indicators that could be used as a proxy, such as: Information System (IS) Department Budget, number of IS staff and the extent of technical trainings provided by the IS department to the clinical staff. This research study hypothesizes that quality technical trainings conducted by an IS department …

Biomechanical Modeling For Lung Tumor Motion Prediction During Brachytherapy And Radiotherapy, Zahra Shirzadi

Electronic Thesis and Dissertation Repository

A novel technique is proposed to develop a biomechanical model for estimating lung’s tumor position as a function of respiration cycle time. Continuous tumor motion is a major challenge in lung cancer treatment techniques where the tumor needs to be targeted; e.g. in external beam radiotherapy and brachytherapy. If not accounted for, this motion leads to areas of radiation over and/or under dosage for normal tissue and tumors. In this thesis, biomechanical models were developed for lung tumor motion predication in two distinct cases of lung brachytherapy and lung external beam radiotherapy. The lung and other relevant surrounding organs geometries, …

Modeling The Adoption Of Identification Standards Within The Healthcare Supply Chain, Angelica Burbano

Graduate Theses and Dissertations

The adoption of identification standards and its associated technology in the healthcare supply chain has been slow over the past twenty five years, despite the evidence of the benefits that can be achieved. The widespread use of identification standards in the form of barcode labeled medical products can contribute to the reduction of point of care errors and can increase the efficiency of healthcare supply chain related processes. This research is focused on the analysis of the adoption of identification standards in the healthcare supply chain with a particular focus on the healthcare provider adoption challenges. The research is divided …

Peptoid Based Slide Coatings For Disease Detection Via Elisa Microarray Analysis, Melissa Lea Hebert

Graduate Theses and Dissertations

Poly-N-substituted glycines (peptoids) are a very versatile family of synthetic molecules that can be customized for any number of applications. In this study, we chose to use peptoids as a foundation for sandwich ELISA microarray analysis with a long term goal of creating an early detection device for complex diseases such as cancer. The peptoids were designed to self-assemble into microspheres to be used in coatings on the surface of the microarray substrates to increase the surface area available for antibody attachment. This increased antibody density would lead to an increase in the microarray analysis sensitivity and dynamic range. Studies …

Fabrication And Characterization Of Thinner Solid-State Nanopores, Denis Forbi Tita

Graduate Theses and Dissertations

Solid State nanopores that are fabricated by the ion beam sculpting process and electron beam drilling have shown great promise as a sensing device for DNA and protein molecules. Even though biological pores such as the alpha-Haemolysin have been in use for quite some time, the use of solid state Nanopores in single biomolecule detection has been on the rise since the mid 1990s. Solid State nanopores have an advantage over biological pores in that they are more robust, stable, and can be sculpted to any desired size for use in translocation experiments. One of the major challenges in Nanopore …

Augmented Image-Guidance For Transcatheter Aortic Valve Implantation, Pencilla Lang

Electronic Thesis and Dissertation Repository

The introduction of transcatheter aortic valve implantation (TAVI), an innovative stent-based technique for delivery of a bioprosthetic valve, has resulted in a paradigm shift in treatment options for elderly patients with aortic stenosis. While there have been major advancements in valve design and access routes, TAVI still relies largely on single-plane fluoroscopy for intraoperative navigation and guidance, which provides only gross imaging of anatomical structures. Inadequate imaging leading to suboptimal valve positioning contributes to many of the early complications experienced by TAVI patients, including valve embolism, coronary ostia obstruction, paravalvular leak, heart block, and secondary nephrotoxicity from contrast use.

A …

Evaluation Of Autonomous Robotic Milling Methodology For Natural Tooth-Shaped Implants Based On Sko Optimization, Yongki Yoon

Mechanical & Aerospace Engineering Theses & Dissertations

Robotic surgery is one of the most demanding and challenging applications in the field of automatic control. One of the conventional surgeries, the dental implantation, is the standard methodology to place the artificial tooth root composed of titanium material into the upper or lower jawbone. During the dental implant surgery, mechanical removal of the bone material is the most critical procedure because it may affect the patient's safety including damage to the mandibular canal nerve and/or piercing the maxillary sinus. With this problem, even though short term survival rates are greater than 95%, long term success rate of the surgery …

Development And Validation Methodology Of The Nuss Procedure Surgical Planner, Krzysztof J. Rechowicz

Computational Modeling & Simulation Engineering Theses & Dissertations

Pectus excavatum (PE) is a congenital chest wall deformity which is characterized, in most cases, by a deep depression of the sternum. A minimally invasive technique for the repair of PE (MIRPE), often referred to as the Nuss procedure, has been proven to be more advantageous than many other PE treatment techniques. The Nuss procedure consists of placement of a metal bar(s) underneath the sternum, thereby forcibly changing the geometry of the ribcage. Because of the prevalence of PE and the popularity of the Nuss procedure, the demand to perform this surgery is greater than ever. Therefore, a Nuss procedure …

Human Motion Tracking For Assisting Balance Training And Control Of A Humanoid Robot, Ahmad Adli Manasrah

USF Tampa Graduate Theses and Dissertations

Abstract

This project illustrates the use of the human's ability to balance according to his center of gravity as demonstrated in two applications. The center of gravity of a human is explained in detail in order to use it in controlling the Aldebaran NAO robot and in the robot-assisted balance training.

The first application explains how a humanoid robot can mimic a human's movements via a three dimensional depth sensor where the sensor analyzes the position of a user's limbs and how the robot can lift one foot and balance on the other by redistributing the its body mass when …

Esem Analysis Of Mice Femurs With Varying Sost Levels, Patrick K. Mcclay

Biomedical Engineering

This project’s goal was to analyze the properties of the cortical femur on 100 mice bones from Lawrence Livermore National Laboratory. Analysis was limited to imaging which determined the ratio of bone volume to total volume (BV/TV) and osteocyte lacunae density. Mice were altered to knock out their SOST gene: a negative regulator of bone formation. Twelve groups were created to differentiate their treatment, duration, and phenotype. Transgenic (TG) mice had an overexpression of the SOST gene: they carried a bacterial artificial chromosome. Mice with limb defects (DEF) were the offspring of two TG mice and carried twice the amount …

Development Of A Protocol To Measure Gene Expression In The Mouse Tibia, Daniel Hoover

Biomedical Engineering

Numerous molecular factors active in bone tissue direct fracture repair and remodeling which can be altered by disease conditions such as Peripheral Arterial Disease (PAD) and Osteoporosis. Methods of molecular biology are commonly applied to investigate the expression and role of these molecular factors. This project presents a robust three-step protocol for examining gene expression in the mouse tibia. The protocol begins with isolating RNA from a flash frozen tibia sample. The isolated RNA is reverse transcribed into cDNA. Finally, PCR is performed to indentify expressed genes. Establishing this protocol will allow further research into the mechanisms of bone remodeling …

Hydrodynamic Effects Of An Arch-Shaped Fiber Optic Probe In A Dissolution Testing Apparatus 2, Yiran Zhang

Theses

Dissolution testing is widely used in the pharmaceutical industry to evaluate newly developed drug formulations and as a quality control method to insure that solid dosage forms have consistent dissolution property. Typically, samples are manually drawn from the dissolution vessel prior to analysis. An approach to overcome the limitations of manual sampling consists in the use of sampling probes, such as fiber optic probes, permanently inserted in the dissolution medium and continually sampling the drug concentration in it as the solid dosage form dissolves. Despite their advantages, permanently inserted fiber optic probes can alter the normal fluid flow within the …

Mri-Based Attenuation Correction In Emission Computed Tomography, Harry R. Marshall

Electronic Thesis and Dissertation Repository

The hybridization of magnetic resonance imaging (MRI) with positron emission tomography (PET) or single photon emission computed tomography (SPECT) enables the collection of an assortment of biological data in spatial and temporal register. However, both PET and SPECT are subject to photon attenuation, a process that degrades image quality and precludes quantification. To correct for the effects of attenuation, the spatial distribution of linear attenuation coefficients (μ-coefficients) within and about the patient must be available. Unfortunately, extracting μ-coefficients from MRI is non-trivial. In this thesis, I explore the problem of MRI-based attenuation correction (AC) in emission tomography.

In particular, I …

Novel Phantoms And Post-Processing For Diffusion Spectrum Imaging, Vaibhav Juneja

Dissertations & Theses (Open Access)

High Angular Resolution Diffusion Imaging (HARDI) techniques, including Diffusion Spectrum Imaging (DSI), have been proposed to resolve crossing and other complex fiber architecture in the human brain white matter. In these methods, directional information of diffusion is inferred from the peaks in the orientation distribution function (ODF). Extensive studies using histology on macaque brain, cat cerebellum, rat hippocampus and optic tracts, and bovine tongue are qualitatively in agreement with the DSI-derived ODFs and tractography. However, there are only two studies in the literature which validated the DSI results using physical phantoms and both these studies were not performed on a …

Development Of A Microfluidic Device Coupled To Microdialysis Sampling For The Pre-Concentration Of Cytokines, Randy Francisco Espinal Cabrera

Graduate Theses and Dissertations

A proof-of-concept microfluidic device combined with heparin-immobilized magnetic beads was created to concentrate cytokine proteins collected from microdialysis samples. Cytokines are known to be related to several diseases such as cancer, and Parkinson's diseases, so to be able to develop more effective diseases treatments their interactions have to be well understood. Amine-functionalized polystyrene and carboxyl-functionalized magnetic microspheres of ~6.0 ìm in diameter were used to immobilize heparin. The amount of heparin immobilized on polystyrene beads was 5.82 x 10-8 ± 0.36 x 10-8 M per 1.0 x 106 beads and for magnetic beads was 0.64 x 10-8 ± 0.01 x …

Patient And Nurse Considerations In Home Health Routing With Remote Monitoring Devices, Jessica Spicer

Graduate Theses and Dissertations

We build on the current consistent vehicle routing problem literature by formulating a novel multi- objective mathematical model of the home health scheduling and routing problem that includes the option of assigning some patient visits to remote monitoring devices, with the objectives of mini- mizing total cost, achieving nurse consistency and creating balanced nurse workloads. A heuristic solution approach that approximates the efficient frontier of this multiobjective problem is pre- sented and validated, and the results of using this methodology to solve several realistic instances are included. We also analyze the assignment of patients to devices and present some managerial …

Aptamer-Based Spr Biosensor For Detection Of Avian Influenza Virus, Hua Bai

Graduate Theses and Dissertations

Rapid and specific detection of avian influenza (AI) virus is urgently needed with the concerns over the outbreaks of highly pathogenic H5N1 avian influenza in animal and human infection. Aptamers are artificial oligonucleic acid that can specifically bind to target molecules. They show comparable affinity for target virus and better thermal stability than monoclonal antibodies. Those advantages make aptamers promising candidates in diagnostic and detection applications. The goal of this research was to use DNA&ndashaptamer as the specific recognition element in a portable surface plasmon resonance (SPR) biosensor for detection of AI H5N1 virus in poultry.

A SPR biosensor was …

The Use Of A Pylon Mounted Transducer For Investigating The Gait Of Transtibial Amputees, Justin Robert Brink

UNLV Theses, Dissertations, Professional Papers, and Capstones

Two areas of research interest in the design and use of lower limb prosthetic devices are how foot performance varies with design and how prosthesis alignment affects gait. The current study addressed both of these areas through the use of the JR3 triaxial transducer mounted at the base of the socket. The transducer is an innovative form of instrumentation that measures forces and moments at the end of the socket. Traditional measurement of gait uses a force plate buried in the floor of a gait laboratory. The study established that the transducer offers a viable means of instrumentation for amputee …

Encapsulation And Controlled Release Of Rhu-Erythropoietin From Chitosan Biopolymer Nanoparticles, Cody Bulmer

Electronic Thesis and Dissertation Repository

The objective of this research project was to develop a drug delivery system for recombinant human erythropoietin (rHu-EPO), a glycoprotein hormone used in the treatment of renal anaemia and chemotherapy induced anaemia, using the biopolymer chitosan as the base component. Two types of chitosan nanoparticles were produced through ionotropic gelation using flush mixing with either tripolyphosphate (TPP) or carrageenan polymer. Chitosan-TPP and chitosan-carrageenan nanoparticles were generated under a variety of conditions to evaluate the effects of chitosan concentration, chitosan to anion mass ratio and solution pH on the nanoparticle characteristics of particle diameter, surface charge and particle size distribution. A …

Synergistic Effect Of Subnanosecond Pulsed Electric Fields And Temperature On The Viability Of Biological Cells, James Thomas Camp

Electrical & Computer Engineering Theses & Dissertations

Pulsed electric fields have been used to induce a biological response in cells, and at sufficient energy, can cause cell death. By reducing the pulse duration from presently used nanosecond to subnanosecond ranges, the electric field can be delivered to biological tissue non-invasively by the use of an antenna instead of electrodes, such as needles. Studies have previously been completed in which the aim was to determine the energy density (electric field strength, number of pulses) required to induce cell death with 800 ps pulses. Based on this data, it was concluded that for pulse durations of 200 ps, with …

Willingness-To-Pay For Maintenance And Improvements To Existing Sanitation Infrastructure: Assessing Community-Led Total Sanitation In Mopti, Mali, Justin Vern Meeks

USF Tampa Graduate Theses and Dissertations

In recent years, much focus has been put on the sustainability of water and sanitation development projects. Experts in this field have found that many of the projects of the past have failed to achieve sustainability because of a lack of demand for water and sanitation interventions at a grassroots level. For years projects looked to create this demand through various subsidy schemes, with the "software" of behavior change and education taking a backseat to the "hardware" of infrastructure provision. Community-Led Total Sanitation (CLTS) is a fairly new way of looking at the issues of increasing basic sanitation coverage, promoting …

Evaluation Of Transfer Technologies To Preserve Shoulder Function In Sci, Karen Michelle Mann

USF Tampa Graduate Theses and Dissertations

This study investigated a series of independent unassisted and device-assisted transfers from a wheelchair to vehicle mock-up and vice versa while simultaneously capturing kinematic, kinetic and electromyographic (EMG) data of impaired volunteers. The study provides a venue for observation and evaluation of upper extremity (UE) joint stresses, muscular force and functional demands associated with transfers in persons with spinal cord injury (SCI) to ultimately prevent UE injury, minimize excessive stress, preserve functionality and limit pain. If people with SCI lose function of their UEs, due to pain and/or degeneration, they must then rely on others for everyday tasks.

Five paraplegic …

The Creation Of A Robotics Based Human Upper Body Model For Predictive Simulation Of Prostheses Performance, Derek James Lura

USF Tampa Graduate Theses and Dissertations

This work focuses on the use of 3D motion capture data to create and optimize a robotic human body model (RHBM) to predict the inverse kinematics of the upper body. The RHBM is a 25 degrees of freedom (DoFs) upper body model with subject specific kinematic parameters. The model was developed to predict the inverse kinematics of the upper body in the simulation of a virtual person, including persons with functional limitations such as a transradial or transhumeral amputation. Motion data were collected from 14 subjects: 10 non-amputees control subjects, 1 person with a transradial amputation, and 3 persons with …

Preparation Of Different Polyamide Nanofiltration Membranes By Interfacial Polymerization And The Effect Of Post-Polymerization Treatment On Separation Performance, Yu Qin

Theses

Interfacial polymerization (IP) is a powerful technique for fabrication of thin film composite (TFC) membranes. In this study, polyamide nanofiltration (NF) composite membranes ware prepared by interfacial polymerization of polyethylenimine (PEI) or m-phenylene diamine (MPD) with isophthaloyl dichloride (IPD) on the surface of a porous polyethersulfone (PES) support. Concentrations of monomer reactants for this reaction were decided by equivalent weight ratio. A standard IP procedure was applied to successfully coat PES flat films. After preparation, three different post-polymerization treatments were employed and one optimal treatment was proven after membrane testing.

The TFC flat film membranes were characterized by nanofiltration of …

Design And Experimental Validation Of Continuous Dna Separation Using Itp-Based Microfluidic Device, Nora C. M. Goscinski, Mary E. Rosa, Elizabeth K. Wheeler, Maxim Shusteff

Chemistry and Biochemistry

We have demonstrated a chip-based microfluidic device suitable for rapid and high-throughput DNA separation and purification for downstream analysis. The glass-based device incorporates a transverse free-flow isotachophoresis (tFF-ITP) that overcomes the volume limitations of CE approaches, and allows continuous sample processing in contrast to batch-mode solid-phase extraction (SPE). The device is able to focus DNA at flow rates up to 100 uL/min, and sample conductivity up to 2 mS/cm. Downstream of the chip, 30-40% of DNA from the input sample is recovered as a result of ITP focusing, and preliminary results indicate that this design is able to purify DNA …