Open Access. Powered by Scholars. Published by Universities.®
- Institution
- File Type
Articles 1 - 11 of 11
Full-Text Articles in Engineering
Isolating Corrosion Of Steel Plates Coupled With Titanium, Anil Patnaik, X. Shan, M. Adams, T. Srivatsan, Craig Menzemer, Joe Payer
Isolating Corrosion Of Steel Plates Coupled With Titanium, Anil Patnaik, X. Shan, M. Adams, T. Srivatsan, Craig Menzemer, Joe Payer
Craig Menzemer
Over twenty six percent of the bridges in the United States are structurally deficient or functionally obsolete. Corrosion of steel used in structures like bridges and buildings is a problem that has gained increased interest and focused concern. Steel is often the metal that is preferred for use in such applications due to a synergism of ease of availability, acceptable mechanical properties and cost effectiveness. Through the years, titanium has grown in strength, stature and significance to be recognized as an emerging high performance metal that is both stronger and lighter than steel. A distinctive property of titanium and its …
Extrinsic Influence Of Environment On The Corrosion Behaviour Of Enamel-Coated Steel Dowel Bars, Srikanth Bajaj, Anil Patnaik, Joe Payer, Robert Liang, Kannan Manigandan, Tirumalai Srivatsan
Extrinsic Influence Of Environment On The Corrosion Behaviour Of Enamel-Coated Steel Dowel Bars, Srikanth Bajaj, Anil Patnaik, Joe Payer, Robert Liang, Kannan Manigandan, Tirumalai Srivatsan
Anil Patnaik
A new type of enamel coated dowel bars for use as concrete pavements has been recently developed and implemented. A gradual deterioration of such bars can occur due to corrosion occurring at locations of the fine microscopic cracks and other defects in the coating. The results of a study aimed at evaluating and understanding the corrosion resistance of such dowel bars is presented and comparisons made with corresponding epoxy-coated dowel bars. Identical defects were introduced onto the surface of the dowel bars with the two types of coatings. The extrinsic influence of environment and resultant corrosion based on type, location …
Isolating Corrosion Of Steel Plates Coupled With Titanium, Anil Patnaik, X. Shan, M. Adams, T. Srivatsan, Craig Menzemer, Joe Payer
Isolating Corrosion Of Steel Plates Coupled With Titanium, Anil Patnaik, X. Shan, M. Adams, T. Srivatsan, Craig Menzemer, Joe Payer
Anil Patnaik
Over twenty six percent of the bridges in the United States are structurally deficient or functionally obsolete. Corrosion of steel used in structures like bridges and buildings is a problem that has gained increased interest and focused concern. Steel is often the metal that is preferred for use in such applications due to a synergism of ease of availability, acceptable mechanical properties and cost effectiveness. Through the years, titanium has grown in strength, stature and significance to be recognized as an emerging high performance metal that is both stronger and lighter than steel. A distinctive property of titanium and its …
Extrinsic Influence Of Environment On The Corrosion Behaviour Of Enamel-Coated Steel Dowel Bars, Srikanth Bajaj, Anil Patnaik, Joe Payer, Robert Liang, Kannan Manigandan, Tirumalai Srivatsan
Extrinsic Influence Of Environment On The Corrosion Behaviour Of Enamel-Coated Steel Dowel Bars, Srikanth Bajaj, Anil Patnaik, Joe Payer, Robert Liang, Kannan Manigandan, Tirumalai Srivatsan
Robert Y. Liang
A new type of enamel coated dowel bars for use as concrete pavements has been recently developed and implemented. A gradual deterioration of such bars can occur due to corrosion occurring at locations of the fine microscopic cracks and other defects in the coating. The results of a study aimed at evaluating and understanding the corrosion resistance of such dowel bars is presented and comparisons made with corresponding epoxy-coated dowel bars. Identical defects were introduced onto the surface of the dowel bars with the two types of coatings. The extrinsic influence of environment and resultant corrosion based on type, location …
Corrosion Of Magnesium And Aluminum In Palm Biodiesel: A Comparative Evaluation
Corrosion Of Magnesium And Aluminum In Palm Biodiesel: A Comparative Evaluation
A.S. Md Abdul Haseeb
The present study aims to investigate the comparative corrosion of light-weight metals such as aluminum and magnesium in palm biodiesel. Immersion test at room temperature was carried out for each metal for 1440 h. Sample characterization techniques employed include weight loss measurement, SEM (scanning electron microscope), XRD (X-ray diffraction), TAN (total acid number) and FTIR (Fourier transform infrared spectroscopy). Results showed that the corrosion rate of magnesium was much higher compared to that of aluminum. The surface morphology revealed a significant difference between the biodiesel exposed aluminum and magnesium specimens. Upon exposure to biodiesel, the magnesium surface was found to …
Degradation Of Automotive Materials In Palm Biodiesel
Degradation Of Automotive Materials In Palm Biodiesel
A.S. Md Abdul Haseeb
As compared to petroleum diesel, biodiesel is more corrosive for automotive materials. Studies on the characterization of corrosion products of fuel exposed automotive materials are scarce. Automotive fuel system and engine components are made from different ferrous and non-ferrous materials. The present study aims to investigate the corrosion products of different types of automotive materials such as copper, brass, aluminum and cast iron upon exposure to diesel and palm biodiesel. Changes in fuel properties due to exposure of different materials were also examined. Degradation of metal surface was characterized by digital camera, SEM/EDS and X-ray diffraction (XRD). Fuel properties were …
Effect Of Temperature On The Corrosion Behavior Of Mild Steel Upon Exposure To Palm Biodiesel
Effect Of Temperature On The Corrosion Behavior Of Mild Steel Upon Exposure To Palm Biodiesel
A.S. Md Abdul Haseeb
Recently biodiesel, as an alternative fuel is getting more significance to replace diesel fuel completely or partially. However, corrosion of automotive materials in biodiesel is a major concern as this can reduce engine life. This study aims to investigate the corrosion behavior of mild steel at three different temperatures such as room temperature, 50 and 80 °C. Static immersion tests in B0 (diesel), B50 (50% biodiesel in diesel), B100 (biodiesel) were carried out for 1200 h. At the end of the tests, corrosion characteristic was investigated by weight loss measurements and changes of the exposed metal surface. Fuels were analyzed …
Compatibility Of Automotive Materials In Biodiesel: A Review
Compatibility Of Automotive Materials In Biodiesel: A Review
A.S. Md Abdul Haseeb
Use of biodiesel in automobile can significantly reduce our dependence of fossil fuel and help reduce environmental pollution. However, there are concerns over the compatibility of currently used automotive materials in biodiesel. A few automobile manufacturers extended their warranty only to lower blends of biodiesel (e.g. B5). Higher blends (e.g. B50 or B100) are still not covered by warranty. In automobile fuel system, metallic materials like ferrous alloy and non-ferrous alloys, and elastomers come in contact with fuel. Biodiesel, having different chemical characteristics from diesel, can interact with materials in a different way. It can cause corrosive and tribological attack …
Comparative Corrosive Characteristics Of Petroleum Diesel And Palm Biodiesel For Automotive Materials
A.S. Md Abdul Haseeb
Corrosive characteristics of biodiesel are important for long term durability of engine parts. The present study aims to compare the corrosion behavior of aluminum, copper and stainless steel in both petroleum diesel and palm biodiesel. Immersion tests in biodiesel (B100) and diesel (B0) were carried out at 80 °C for 1200 h. At the end of the test, corrosion characteristic was investigated by weight loss measurements and changes on the exposed metal surface. Surface morphology was examined by optical microscope and scanning electron microscopy with energy dispersive X-ray analysis (SEM/EDS). Fuels were analyzed by using TAN analyzer, FTIR, GCMS and …
Corrosion Characteristics Of Copper And Leaded Bronze In Palm Biodiesel
Corrosion Characteristics Of Copper And Leaded Bronze In Palm Biodiesel
A.S. Md Abdul Haseeb
Biodiesel has become more attractive as alternative fuel for automobiles because of its environmental benefits and the fact that it is made from renewable sources. However, corrosion of metals in biodiesel is one of the concerns related to biodiesel compatibility issues. This study aims to characterize the corrosion behavior of commercial pure copper and leaded bronze commonly encountered in the automotive fuel system in diesel engine. Static immersion tests in B0, B50 and B100 fuels were carried out at room temperature for 2640 h. Similar immersion tests in B0, B100 and B100 (oxidized) fuels were also conducted at 60 °C …
Thermal Stability Of Electrodeposited Liga Ni-W Alloys For High Temperature Mems Applications
Thermal Stability Of Electrodeposited Liga Ni-W Alloys For High Temperature Mems Applications
A.S. Md Abdul Haseeb
For thermally stable LIGA materials for high temperature MEMS applications LIGA Ni-W layers and micro testing samples with different compositions (15 and 5 at% W) were electrodeposited. In order to investigate the thermal stability the Ni-W layers were annealed at different temperatures (300-700°C) and for different durations (1, 4, 16 h). Their microstructure and micro-hardness were than analysed after annealing and compared with those of as-deposited states. The observed microstructures show, in comparison to pure LIGA nickel, a small grain growth and a relatively stable structure up to 700°C. The micro-hardness values of the LIGA Ni-W layers are higher than …