Engineering Commons^™

Passive Separation Of Binary Fluid Mixtures In Microchannels Using Lattice Boltzmann Method, Mohanad Kamil Radhi

Dissertations and Theses

Fluid mixtures in real life exist in two forms: miscible and immiscible. Separation of these mixtures using chemical agents or thermal energy has both environmental and economic disadvantages. The high cost and the environmental damage caused by the traditional separation techniques have stimulated both academia and industry to seek alternatives. The emergence of microfluidics offers robust solutions for a broad span of transport problems due to the high surface to volume ratio and reduced length scales. Particularly, the separation efficiency increases significantly due to the aforementioned feature. However, there is still a pressing need of passive separations for the sake …

Tracking Center Of Mass With Limited Inertial Measurement Units, Connor Nathaniel Morrow

Dissertations and Theses

Wearable motion tracking systems pose an opportunity to study and correct human balance and posture during movement. Currently, these observations are either being conducted in laboratories with the use of camera systems and markers placed on the body, or through the use of suits containing large numbers (15-20) of inertial measurement units. However, to aid with rehabilitation of individuals with impaired balance, there needs to be an option to collect these observations outside of clinics and without incurring much cost from the user. I have focused on three inertial measurement units, one placed on each shank and one placed on …

Non-Contact Distillation, Rawand Muzafar Rasheed

Dissertations and Theses

Leidenfrost phenomenon has been studied extensively for its role in applications ranging from nuclear reactor cooling, to metals manufacturing, combustion, and other fields. Herein, Leidenfrost phenomenon is pursued towards non-contact distillation processes with hopes of reducing or even eliminating contaminant fouling. In particular, the microgravity environment of a drop tower is exploited to demonstrate the facility with which droplets achieve and sustain the Leidenfrost state. Dynamic Leidenfrost impacts in microgravity are presented for impacts on hydrophilic and superhydrophobic planar substrates, macro-pillar arrays, confined passageways, and others. Nearly ideal elastic non-contact impacts and droplet oscillation modes are observed. Dynamic Leidenfrost impacts …

Design Of A Canine Inspired Quadruped Robot As A Platform For Synthetic Neural Network Control, Cody Warren Scharzenberger

Dissertations and Theses

Legged locomotion is a feat ubiquitous throughout the animal kingdom, but modern robots still fall far short of similar achievements. This paper presents the design of a canine-inspired quadruped robot named DoggyDeux as a platform for synthetic neural network (SNN) research that may be one avenue for robots to attain animal-like agility and adaptability. DoggyDeux features a fully 3D printed frame, 24 braided pneumatic actuators (BPAs) that drive four 3-DOF limbs in antagonistic extensor-flexor pairs, and an electrical system that allows it to respond to commands from a SNN comprised of central pattern generators (CPGs). Compared to the previous version …

Characterizing Tilt Effects On Wind Plants, Ryan Scott

Dissertations and Theses

Tilting the nacelle of a wind turbine modifies entrainment into the wind plant and impacts total efficiency. Extreme angles can produce flying and crashing wakes where the wake either disrupts entertainment from the undisturbed flow above or is decimated on the ground. The effect of tilt angle on downstream wake behavior was investigated in a series of wind tunnel experiments. Scale model turbines with a hub height and diameter of 12 cm were arranged in a Cartesian array comprised of four rows of three turbines each. Nacelle tilt was varied in the third row from -15° to 15° in chosen …

Infinite Photovoltaic Solar Arrays: Considering Flux Of Momentum And Heat Transfer, Andrew D. S. Glick

Dissertations and Theses

Large scale solar farms supply an increasing amount of the worlds electricity supply. However, in order to reach cost parity with fossil fuels, further reductions are necessary. Towards this end, photovoltaic (PV) panel cooling becomes increasingly important; high temperatures both decrease efficiency and panel lifetime. To better understand, characterize, and exploit the natural convective cooling of utility scale solar farms, a model solar farm was created. Using both thermal measurements and particle image velocimetry to characterize heat transfer and velocity fields, wind tunnel experiments were conducted using the model solar farm. Three parameters were examined for their effect on heat …

Fatigue Characteristics Of New Eco Series Aluminum 7175 Alloy, Chinh Q.L. Vu

Dissertations and Theses

In this dissertation, the fatigue characteristics of three newly developed experimental compositions for aluminum 7175, with improved mechanical strength, that uses magnesium-calcium alloy instead of pure magnesium are studied.

Specimens of each variant were fabricated and subjected to fatigue life testing, fatigue life data analysis, and observation of their fracture characteristics through optical microscopy and scanning electron microscopy (SEM), and metallography to study their grains and surface characteristics.

Fatigue life testing shows all three variants have a fatigue strength that is approaching approximately 200 MPa. ECO7175v3 is shown to have the highest fatigue strength of approximately 220 MPa at 5x10 …

A Study Of Thermal Energy Storage Of Phase Change Materials: Thermophysical Properties And Numerical Simulations, Kyung-Eun Min

Dissertations and Theses

A Thermal Energy Storage (TES) system is meant for holding thermal energy in the form of hot or cold materials for later utilization. A TES system is an important technological system in providing energy savings as well as efficient and optimum energy use. The main types of a TES system are sensible heat and latent heat. A latent heat storage is a very efficient method for storing or releasing thermal energy due to its high energy storage density at constant temperatures, and a latent heat storage material can store 5-14 times more heat per unit volume than a sensible heat …

Wrinkling Of Membrane And Thin Film Under Torsion, Tingting Chen

Dissertations and Theses

Membranes and thin film structures are widely used in modern technologies. Applications include solar sails and sunshields in space missions, biological membranes and flexible circuit boards. Wrinkling of membrane or a stiff film on a soft substrate may occur in either desired or unwanted patterns. This work tries to obtain some understanding on the wrinkling phenomenon and provide guidance in avoiding wrinkling or effectively controlling the wrinkle patterns.

Many works have been published about wrinkling in the thin sheets since the 20^th century. However, there is no simple analytical way to systematically characterize the wrinkling in these studies. In …

The Influence Of Size And Progression Of Intra-Cerebral Hematoma On The Lateral Ventricles, Muhammad J. Ashraf

Dissertations and Theses

Cerebrovascular diseases like intra cerebral hemorrhage are quite deadly and may disturb functioning of the brain, expanding and resulting in formation of an intra cerebral hematoma(ICH). It is imperative to comprehend how hematoma and its expansion inside the brain endangers human life. One of the influences of an ICH inside brain tissue is on the Lateral Ventricles(LV). When the hemorrhage occurs close enough to the lateral ventricles, filled with cerebrospinal fluid(CSF), it disrupts the balance of fluid in LV. A minor pressure change in LV can negatively influence the production of CSF as well as an increase in intracranial pressure. …

Void Fraction Measurements In Large (0.3 M) Diameter Bubble Column Using Wire Mesh Sensor And Pressure Transducers- Effect Of Sparger, Afolabi Gabriel Ojo

Dissertations and Theses

The importance of the accurate temporal and spatial measurements of the two-phase flow parameters in bubble columns is very well known. The aim of this research work is to report the spatial measurements of the void fraction distribution in a 30 cm diameter cylindrical bubble column using Wire Mesh Sensor (WMS) tomography and Pressure Transducers. Pair of WMS sensors, with a 64×64 wire configuration of each sensor, were installed which are separated by a distance along the axis of the bubble column. Wire Mesh Sensors and PTs Data were collected for time-averaged and transient with a sampling frequency of 1000 …

Literature Survey Of Wet-Waste And Hydrothermal Carbonization System: A Comparative Evaluation, Ramat Olaide Yusuf

Dissertations and Theses

This thesis describes the process of Hydrothermal carbonization and a comparative assessment on recent work done on the process using different feedstocks such as Raw Apple (RA), Apple chip pomace (ACP), apple juice pomace (AJP), grape pomace (GP), macadamia nut-shell (MNS), Sewage Sludge (SS), Poultry Litter (PL) and Grape Marc (GM). The data obtained from the literature survey was compared with the data obtained by the CCL team on the SWPS gasifier (HTC of poultry litter) to obtain how carbon conversion efficiency, syngas composition, thermal efficiency, char production rate, gas production rate and energy utilization vary with carbonization process conditions, …

Void Fraction Measurements In A Large (0.3 M) Diameter Bubble Column Using Wire Mesh Sensors And Pressure Transducers: Effect Of Spargers, Afolabi G. Ojo

Dissertations and Theses

The importance of the accurate temporal and spatial measurements of the two-phase flow parameters in bubble columns is very well known. The aim of this research work is to report the spatial measurements of the void fraction distribution in a 30 cm diameter cylindrical bubble column using Wire Mesh Sensor (WMS) tomography and Pressure Transducers. Pair of WMS sensors, with a 64×64 wire configuration of each sensor, were installed which are separated by a distance along the axis of the bubble column. Wire Mesh Sensors and PTs Data were collected for time-averaged and transient with a sampling frequency of 1000 …

Development Of Electromagnetic Friction Dampers For Improving Seismic Performance Of Civil Structures, Mohsen Amjadian

Dissertations and Theses

Energy dissipation is critical to limiting damage to civil structures subjected to extreme natural events such as earthquakes. Friction is one of the most reliable mechanisms of energy dissipation that has been utilized extensively in friction dampers to improve seismic performance of civil structures. Friction dampers are well-known for having a highly nonlinear hysteretic behavior caused by stick-slip motion at low velocities, a phenomenon that is inherent in friction and increases the acceleration response of the structure under control unfavorably, in spite of the fact that the displacement is generally reduced because of the energy dissipation. This increase in acceleration …