Engineering Commons^™

Borophene And Graphene For Non-Enzymatic Biosensor- Ab-Initio Study, Omar A. Ismail

Theses and Dissertations

Non-enzymatic glucose sensing holds promise to overcome limitations associated with glucose oxidase, such as oxygen dependence and short shelf life. This study explores the potential sensing capabilities of borophene and graphene through direct interaction with various compounds, including β-glucose, uric acid, ascorbic acid, fructose, and acetaminophen. Using Density Functional Theory (DFT), we calculated binding energies and the respective Density of States (DOS) for these adsorbates on both graphene and borophene surfaces. Preliminary results suggest that borophene might exhibit nearly twice the affinity for β-glucose compared to graphene. Moreover, the calculated Density of States reveals distinct distortions in the electronic states …

Design, Fabrication And Characterization Of Zero Power Sensor/Harvester For Smart Grid Applications, Zeynel Guler

Mechanical Engineering ETDs

This study presents a flexible sensor/harvester device to be used in both electromagnetic sensing and energy harvesting applications for smart grids. When a current passes through a wire, the sensor detects the magnetic field created by that current. The sensor magnet interacts with the wire magnetic field resulting in a transfer of energy through the piezoelectric cantilever. Piezoelectric, conductive, magnetic, and magnetostrictive composite thin films were prepared to fabricate this device.

Initially, the magnet of the cantilever was optimized considering its shape, thickness, length, taper angle etc. via both simulations and experiments. Peak to peak voltage versus cantilever position graph …

Two-Dimensional Nanomaterials And Nanocomposites For Sensing, Separation, And Energy Applications, Md Ashiqur Rahman

Theses and Dissertations

Two-dimension (2D) nanomaterials have gained popularity for the last few decades due to their excellent mechanical, electrical and thermal properties. These unique properties of 2D nanomaterials can be exploited in various applications specially in sensor, energy, and separation devices. In this study, the sensing and energy generation performance of PVDF/PAni fiber mat systems made by the forcespinning method with and without graphene coating. The graphene-coated nanocomposites show an average output voltage of 75 mV (peak-to-peak) which is 300% higher compared to bare fiber mats and an output current of 24 mA (peak-to-peak) by gentle finger pressing. Moreover, the graphene-coated PVDF/PAni …

Bike To The Future, Wanjiku Gichigi, Luisa Shu Yi Chiu, Alexander Kalman Dunn, Georgia Ann Holmes

Mechanical Engineering

Brian Higgins is a veteran with retinitis pigmentosa who enjoys biking. The motivation for this project was to design and manufacture a refined prototype of a bike attachment to assist Brian in safely biking to and from work. The customer needs, problem definition, background, design development, final design, testing, costs, and recommendations are provided in this report.

The solution for this project, as laid out in the design development section, was to design an assembly that would detect objects in the biker’s path and relays that information to them. The design incorporated a dashboard to conceal components within, protect them …

Development Of A Wireless Telemetry Load And Displacement Sensor For Orthopaedic Applications, William Anderson

Electronic Thesis and Dissertation Repository

Due to sensor size and supporting circuitry, in vivo load and deformation measurements are currently restricted to applications within larger orthopaedic implants. The objective of this thesis is to repurpose a commercially available low-power, miniature, wireless, telemetric, tire-pressure sensor (FXTH87) to measure load and deformation for future use in biomechanical applications. The capacitive transducer membrane of the FXTH87 was modified, and a relationship was reported between applied compressive deformation and sensor signal value. The sensor package was embedded within a deformable enclosure to illustrate potential applications of the sensor for monitoring load. Finite element analysis was an effective tool to …

Lead Free Piezoelectric And Triboelectric Energy Film For Energy Harvesting And Sensory Applications, Abu Musa Abdullah

Theses and Dissertations

In recent times, Triboelectricity and Piezoelectricity has been widely used for utilizing mechanical energy from ambient environment. Scientists are focusing towards developing advanced material composites for utilizing piezoelectricity and triboelectricity for energy harvesting and sensory applications. This work includes two projects regarding the application of lead free piezoelectric and triboelectric energy for energy harvesting and sensory applications. Human motion has been attributed as a source of mechanical energy to drive electronic devices and sensors through Triboelectric Nanogenerator (TENG). Based on the principles of single electrode TENG, we have developed a Triboelectricity based Stepping and Tapping Energy Case (TESTEC) which magnifies …

Microwave Acoustic Saw Resonators For Stable High-Temperature Harsh-Environment Static And Dynamic Strain Sensing Applications, Anin K. Maskay

Electronic Theses and Dissertations

High-temperature, harsh-environment static and dynamic strain sensors are needed for industrial process monitoring and control, fault detection, structural health monitoring in power plant environments, steel and refractory material manufacturing, aerospace, and defense applications. Sensor operation in the aforementioned extreme environments require robust devices capable of sustaining the targeted high temperatures, while maintaining a stable sensor response. Current technologies face challenges regarding device or system size, complexity, operational temperature, or stability.

Surface acoustic wave (SAW) sensor technology using high temperature capable piezoelectric substrates and thin film technology has favorable properties such as robustness; miniature size; capability of mass production; reduced installation …

Sandia Senior Design Collaboration: Vacuum Sensor Design, James L. Valerio, Eric J. Black, Joseph P. Bednarz, David R. Warther

Williams Honors College, Honors Research Projects

Sandia National Laboratories has requested a fully mechanical device to close a circuit after launch has occurred and the device enters a vacuum. Intended for applications in rockets and missiles, the device must fit in a 36 degree wedge with a 6.8 inch radius that is 6 inches in height and be ready to bolt onto a rocket. The pressure switch must be prevented from actuating until a launch acceleration ranging from 20 to 27g is detected. The pressure switch must close the circuit after a pressure of 10^-1 Torr is reached and before a pressure of 10^{-6 …}

Process Development And Characterization Of Smart Parts Fabricated Using Powder Bed Fusion Additive Manufacturing Technologies, Mohammad Shojib Hossain

Open Access Theses & Dissertations

The fields of modern energy conversion, e.g., fossil fuel, natural gas, and coal power plants, are in increased need of health monitoring and data collection (temperature, pressure, and flow rate) to improve process efficiency and satisfy the demand for clean energy. In situ process monitoring can lead to a robust automated system to achieve the goal. The monitoring equipment or sensors in energy systems components (e.g., pressure tube, turbine blade, and fuel injector) undergo high temperature, high pressure, and corrosive environments; for example, combustion inlet conditions can reach up to 810 K and 2760 kPa [1]. Therefore, a reliable, accurate, …

Tunable Plasmonic Thermal Emitter Using Metal-Coated Elastomeric Structures, Robert Zando

Masters Theses

This project was focused on the creation of a gold-coated grating structure capable of inducing a surface plasmon polariton within the mid-infrared region, enhancing emissions at specific wavelengths based on the grating periodicity. The grating structure was formed on a silicone elastomer, polydimethylsiloxane (PDMS), in order to give the structure, the ability to have the periodicity dimensions of the grating altered by applying a stress, thereby changing the location of the emission enhancement, giving the device the potential to be used as an infrared strain sensor.

Creation of the structure employed a top-down, micro-scale fabrication technique referred to as Direct …

Analytical Modeling Of A Novel Microdisk Resonator For Liquid-Phase Sensing: An All-Shear Interaction Device (Asid), Mohamad Sadegh Sotoudegan

Dissertations (1934 -)

Extensive research on micro/nanomechanical resonators has been performed recently due to their potential to serve as ultra-sensitive devices in chemical/biosensing. These applications often necessitate liquid-phase sensing, introducing significant fluid-induced inertia and energy dissipation that reduces the resonator’s performance. To minimize the detrimental fluid effects on such devices, a novel microdisk resonator supported by two tangentially-oriented, axially-driven “legs” is investigated analytically and effects of the system parameters on the resonator/sensor performance are explored. Since the device surface vibrates primarily parallel to the fluid-structure interface, it is referred to here as an “all-shear interaction device,” or ASID. Analytical modeling of the ASID …

Design Of An Automated Vehicle Detection System For Bicycles: Fireworks Cycling Sensor, Jason Cheng, Peter Kim, Tory Morgan, Clayton Young

Industrial and Manufacturing Engineering

Abstract

This report explores the necessity for increased cyclist safety in urban settings, leading to the birth of a product which aims to drastically reduce the risk of accidents while heightening the sense of safety overall. The project outlines and details the product development process of a consumer-friendly vehicle detection system, with a holistic scope which includes technical rapid prototyping and coding, team dynamics, decision making process, and change management. Two formal prototypes were developed before a functional final product was identified and constructed, each iteration drastically improving practicality and efficiency of detection. The final product underwent extensive testing in …

Ubot-7: The Design Of A Compliant Dexterous Mobile Manipulator, Jonathan Cummings

Masters Theses

This thesis presents the design of uBot-7, the latest version of a dexterous mobile manipulator. This platform has been iteratively developed to realize a high performance-to-cost dexterous whole body manipulator with respect to mobile manipulation. The semi-anthropomorphic design of the uBot is a demonstrated and functional research platform for developing advanced autonomous perception, manipulation, and mobility tasks. The goal of this work is to improve the uBot’s ability to sense and interact with its environment in order to increase the platforms capability to operate dexterously, through the incorporation of joint torque feedback, and safely, through the implementation of passive and …

Thermal Response Characterization And Low Fluid Velocity Measurements Using Specialized In-Situ Thermocouples Via The Loop Current Step Response Method, Alexander Hashem Hashemian

Masters Theses

In this study, a specialized balanced-leads thermocouple was developed to perform in-situ thermal response characterization via the LCSR test method. Thermal response characterization of installed thermocouples is essential in order to obtain accurate positional temperature data in rapid transient applications. An analytical model is presented that fully describes the thermocouple system based on a first-principles approach to the heat transfer physics of the sensor. In conjunction with the LCSR test, the full model presented yields quantifiable characterization parameters useful for determining accurate positional temperature data. It is necessary to employ a balanced-leads thermocouple for this experimental procedure in order to …

Nanocomposite High Displacement Strain Gauges For Use In Human-Machine Interfaces: Applications In Hand Pose Determination, Thomas B. Calkins

Theses and Dissertations

Conductive nanocomposites are finding many uses as multi-functional materials. One recent development involves the creation of high displacement strain gauges, which have potential applications in a variety of engineering roles. The piezoresistive nature of the gauges makes possible their strain sensing capability. The intent of this research is to show that specific High Displacement Strain Gauges can successfully be used in one human-machine interface application that will demonstrate their potential for a range of other human-machine interface applications. This will be shown in the development of these sensors to accomplish hand pose determination. The flexible and inexpensive gauges are attached …

Artificial Skin Tactile Sensor For Prosthetic And Robotic Applications, Ross James Miller

Master's Theses

To solve the problem of limited tactile sensing in humanoid robotics as well as provide for future planned mechanical prostheses, an innovative tactile sensor system was created and embedded into two realistic-looking artificial skin gloves. These artificial skin tactile sensors used small piezoelectric ceramic disks to measure applied force at multiple points on each glove. The gloves were created using silicone rubber to simulate both the texture and look of human skin, while maintaining both flexibility and durability. The sensor outputs were buffered by high-impedance voltage-following operational amplifiers, and then read sequentially using a multiplexing scheme by a microcontroller. Sensor …

On Nonlinear Response Of Micro And Nano Capacitive Resonators, Martin William Knecht

Theses and Dissertations - UTB/UTPA

The nonlinear response of an electrostatically actuated micro/nano-resonator is investigated. The resonator is parametrically actuated using an electrostatic force with a first order fringe correction. Viscous damping and the Casimir effect are included. The resonator is studied using the Method of Multiple Scales in a direct approach of the problem and then compared numerically using a Reduced Order Model based on the application of a Galerkin procedure. In addition to primary resonance (ω0), parametric resonances are found at half (½ω0), twice (2ω 0), and three-halves ([special characters omitted]ω0) natural frequency. The frequency response is investigated for excitations near primary and …

Irrigation Leak Detection: Using Flow Rate Sensors To Detect Breaks In An Irrigation System, Adam Openshaw, Kalvin Vu

Computer Engineering

This report details the exploration and invention of a mechanism that can detect breaks in an irrigation system. With the ultimate goal of conserving water, we have designed an inexpensive, self sustaining flow rate monitor that can be used to identify anomalies in an irrigation system and wirelessly communicate the status of the system to a base station. Our implementation can also determine the direction of the anomaly based on the nature of the anomaly itself. This means that multiple monitors can be used to pinpoint the location of a break within the system in addition to merely detecting its …

Piezoresistive Models For Polysilicon With Bending Or Torsional Loads, Gerrit T. Larsen

Theses and Dissertations

This thesis presents new models for determining piezoresistive response in long, thin polysilicon beams with either axial and bending moment inducing loads or torsional loads. Microelectromechanical (MEMS) test devices and calibration methods for finding the piezoresistive coefficients are also presented for both loading conditions. For axial and bending moment inducing loads, if the piezoresistive coefficients are known, the Improved Piezoresistive Flexure Model (IPFM) is used to find the new resistance of a beam under stress. The IPFM first discretizes the beam into small volumes represented by resistors. The stress that each of these volumes experiences is calculated, and the stress …

A Compliant Threshold Acceleration Sensor Integrated With Radio Frequency Identifiable Tags, Benjamin L. Todd

Theses and Dissertations

Fully compliant bistable mechanisms have been proposed to be used as threshold accelerometers. The advantages to using these devices are that they require no external power to operate and maintain their sensing state. Using this characteristic the devices can be integrated with passive radio frequency identification tags (RFID). This allows for the sensing package to lay dormant with no maintenance needed until the sensor is read by the RFID reader. This thesis presents a successfully fabricated and integrated threshold accelerometer with a passive RFID tag. This in turn has been successfully read with an RFID reader and shown to act …

Design Of Piezoresistive Mems Force And Displacement Sensors, Tyler Lane Waterfall

Theses and Dissertations

MEMS (MicroElectroMechanical Systems) sensors are used in acceleration, flow, pressure and force sensing applications on the micro and macro levels. Much research has focused on improving sensor precision, range, reliability, and ease of manufacture and operation. One exciting possibility for improving the capability of micro sensors lies in exploiting the piezoresistive properties of silicon, the material of choice in many MEMS fabrication processes. Piezoresistivity—the change of electrical resistance due to an applied strain—is a valuable material property of silicon due to its potential for high signal output and on-chip and feedback-control possibilities. However, successful design of piezoresistive micro sensors requires …

Novel Conceptual Design And Anlysis Of Polymer Derived Ceramic Mems Sensors For Gas Turbine Environment, Narasimha Nagaiah

Electronic Theses and Dissertations

Technical challenges for developing micro sensors for Ultra High Temperature and turbine applications lie in that the sensors have to survive extremely harsh working conditions that exist when converting fuel to energy. These conditions include high temperatures (500-1500°C), elevated pressures (200-400 psi), pressure oscillations, corrosive environments (oxidizing conditions, gaseous alkali, and water vapors), surface coating or fouling, and high particulate loading. Several technologies are currently underdeveloped for measuring these parameters in turbine engines. One of them is an optical-based non-contact technology. However, these nondirective measuring technologies lack the necessary accuracy, at least at present state. An alternative way to measure …