Engineering Commons^™

Gender Dimorphic Acl Strain In Response To Combined Dynamic 3d Knee Joint Loading: Implications For Acl Injury Risk, Kiyonori Mizuno, Jack T. Andrish, Antonie J. Van Den Bogert, Scott G. Mclean

Mechanical Engineering Faculty Publications

While gender-based differences in knee joint anatomies/laxities are well documented, the potential for them to precipitate gender-dimorphic ACL loading and resultant injury risk has not been considered. To this end, we generated gender-specific models of ACL strain as a function of any six degrees of freedom (6DOF) knee joint load state via a combined cadaveric and analytical approach. Continuously varying joint forces and torques were applied to five male and five female cadaveric specimens and recorded along with synchronous knee flexion and ACL strain data. All data (~10,000 samples) were submitted to specimen-specific regression analyses, affording ACL strain predictions as …

Intermittent Behaviour Of A Cracked Rotor In The Resonance Region, Grzegorz Litak, Jerzy T. Sawicki

Mechanical Engineering Faculty Publications

Vibrations of the Jeffcott rotor are modelled by a three degree of freedom system including coupling between lateral and torsional modes. The crack in a rotating shaft of the rotor is introduced via time dependent stiffness with off-diagonal couplings. Applying the external torque to the system allows to observe the effect of crack “breathing” and gain insight into the system. It is manifested in the complex dynamic behaviour of the rotor in the region of internal resonance, showing a quasi-periodic motion or even non-periodic behaviour. In the present paper report, we show the system response to the external torque excitation …

Mechanics-Based Analysis Of Selected Features Of The Exoskeletal Microstructure Of Popillia Japonica, Liang Cheng, Liyun Wang, Anette M. Karlsson

Mechanical Engineering Faculty Publications

We explore key mechanical responses of the layered microstructure found in selected parts of the exoskeletons (pronotum, leg and elytron) of Popillia japonica (Japanese beetle). Image analyses of exoskeleton cross-sections reveal four distinct layered regions. The load-bearing inner three regions (exocuticle, mesocuticle, and endocuticle) consist of multiple chitin-protein layers, in which chitin fibers align in parallel. The exocuticle and mesocuticle have a helicoidal structure, where the stacking sequence is characterized by a gradual rotation of the fiber orientation. The endocuticle has a pseudo-orthogonal structure, where two orthogonal layers are joined by a thin helicoidal region. The mechanics-based analyses suggest that, …

Cracked Rotor Detection By Recurrence Plots, Grzegorz Litak, Jerzy T. Sawicki, Rafał Kaspereka

Mechanical Engineering Faculty Publications

Recurrence plots (RPs) analysis has been used to distinguish cracked and healthy rotor responses. It has been shown that the recurrence criteria of the dynamical systems defined by the RPs can indicate the damages of the rotating shaft using relatively short time series.

An Elaborate Data Set Characterizing The Mechanical Response Of The Foot, Ahmet Erdemir, Pavana A. Sirimamilla, Jason P. Halloran, Antonie J. Van Den Bogert

Mechanical Engineering Faculty Publications

Mechanical properties of the foot are responsible for its normal function and play a role in various clinical problems. Specifically, we are interested in quantification of foot mechanical properties to assist the development of computational models for movement analysis and detailed simulations of tissue deformation. Current available data are specific to a foot region and the loading scenarios are limited to a single direction. A data set that incorporates regional response, to quantify individual function of foot components, as well as the overall response, to illustrate their combined operation, does not exist. Furthermore, the combined three-dimensional loading scenarios while measuring …

On Tgo Creep And The Initiation Of A Class Of Fatigue Cracks In Thermal Barrier Coatings, Mercedes T. Hernandez, Anette M. Karlsson, Marion Bartsch

Mechanical Engineering Faculty Publications

The initiation of a class of fatigue cracks observed in thermal barrier coatings (TBCs) subjected to thermal gradient mechanical fatigue testing is investigated. The coating system is based on a NiCoCrAlY bond coat and a partially yttria stabilized zirconia top coat. To explain the development of the cracks of interest, the thermo-mechanical response of the bond coat and the thermally grown oxide (TGO) is examined and quantified through finite element analyses. The models include non-linear and time-dependent behavior such as creep, TGO growth stress, and thermo-mechanical cyclic loading. The simulations suggest that stress-redistribution due to creep can lead to tensile …

Comment On "A Stochastic Biomechanical Model For Risk And Risk Factors Of Non-Contact Anterior Cruciate Ligament Injuries", Antonie J. Van Den Bogert, Scott G. Mclean

Mechanical Engineering Faculty Publications

No abstract provided.

Assessing Vaginal Surgical Skills Using Video Motion Analysis, Gouri B. Diwadkar, Antonie J. Van Den Bogert, Matthew D. Barber, J. Eric Jelovsek

Mechanical Engineering Faculty Publications

OBJECTIVE: To demonstrate the feasibility of using video motion analysis to quantitate a key step of vaginal hysterectomy and define measurable differences between novice and experienced surgical trainees during vaginal hysterectomy.

METHODS: Analyses focused on clamping, transecting, and suturing the left uterosacral ligament. Using a cutoff of 25, trainees were grouped as experienced (n=14) and novice (n=9) based on the total number of vaginal hysterectomies performed by each trainee. Contrasting-groups analysis was used to determine cutoff values that separated novices from experts.

RESULTS: Novice trainees took longer (112 seconds compared with 84 seconds) and had greater cumulative translational motion (92 …

Crack Identification By Multifractal Analysis Of A Dynamic Rotor Response, Grzegorz Litak, Jerzy T. Sawicki

Mechanical Engineering Faculty Publications

Multifractal analysis has been used to diagnose cracked and healthy rotors. Is has been shown that the complexity and regularity criteria of the dynamical systems defined by the multiple scaling of the time series can indicate the damages of the rotating shaft. Relation to the standard power spectrum technique has been also discussed.

Assessing Plastically Dissipated Energy As A Condition For Fatigue Crack Growth, D. Cojocaru, Anette M. Karlsson

Mechanical Engineering Faculty Publications

The suitability of using a proposed condition for simulating cyclic crack propagation in a numerical scheme is qualitatively investigated, employing the finite element method. The propagation criterion is based on a condition that relates the plastically dissipated energy to a critical value. In the finite element simulation scheme, the crack is allowed to propagate when the criterion is satisfied, and the crack propagates until the condition is no longer fulfilled. Experimentally, it is well established that a negative load ratio increases the crack propagation rate, whereas a tensile overload tends to decrease the crack propagation rate. By simulating these load …

A Microfabricated Segmented-Involute-Foil Regenerator For Enhancing Reliability And Performance Of Stirling Engines: Phase Iii Final Report For The Radioisotope Power Conversion Technology Nra Contract Nas3-03124, Mounir B. Ibrahim, David Gedeon, Gary Wood, Jeffrey Mclean

Mechanical Engineering Faculty Publications

Under Phase III of NASA Research Announcement contract NAS3-03124, a prototype nickel segmented-involute-foil regenerator was microfabricated and tested in a Sunpower Frequency-Test-Bed (FTB) Stirling convertor. The team for this effort consisted of Cleveland State University, Gedeon Associates, Sunpower Inc. and International Mezzo Technologies. Testing in the FTB convertor produced about the same efficiency as testing with the original random-fiber regenerator. But the high thermal conductivity of the prototype nickel regenerator was responsible for a significant performance degradation. An efficiency improvement (by a 1.04 factor, according to computer predictions) could have been achieved if the regenerator was made from a low-conductivity …

Mechanics-Based Model For Non-Affine Swelling In Perfluorosulfonic Acid (Pfsa) Membranes, Ahmet Kusoglu, Michael H. Santare, Anette M. Karlsson

Mechanical Engineering Faculty Publications

A mechanics-based model is developed to predict the swelling pressure in perfluorosulfonic acid (PFSA) ionomer membranes during water uptake. The PFSA membrane is represented as a two-phase system, where the water-filled hydrophilic domains are dispersed throughout the hydrophobic polymer matrix. Two representative volume elements (RVEs) are used to represent the nanostructure: (i) a spherical RVE with a spherical hydrophilic domain at the center, and (ii) a cylindrical RVE with a cylindrical hydrophilic domain. The model starts with the non-affine swelling behavior of the membrane and interprets this as a structural reorganization of the RVEs to characterize the microscopic deformation. Swelling …

A Real-Time, 3-D Musculoskeletal Model For Dynamic Simulation Of Arm Movements, Edward K. Chadwick, Dimitra Blana, Antonie J. Van Den Bogert, Robert F. Kirsch

Mechanical Engineering Faculty Publications

Neuroprostheses can be used to restore movement of the upper limb in individuals with high-level spinal cord injury. Development and evaluation of command and control schemes for such devices typically require real-time, ldquopatient-in-the-looprdquo experimentation. A real-time, 3-D, musculoskeletal model of the upper limb has been developed for use in a simulation environment to allow such testing to be carried out noninvasively. The model provides real-time feedback of human arm dynamics that can be displayed to the user in a virtual reality environment. The model has a 3-DOF glenohumeral joint as well as elbow flexion/extension and pronation/supination and contains 22 muscles …

Stress-Strain Behavior Of Perfluorosulfonic Acid Membranes At Various Temperatures And Humidities: Experiments And Phenomenological Modeling, Ahmet Kusoglu, Yaliang Tang, Michael Santare, Anette M. Karlsson, Simon Cleghorn, William B. Johnson

Mechanical Engineering Faculty Publications

The constitutive response of perfluorinated sulfonic acid (PFSA) membranes based on tensile testing is investigated, and a phenomenological constitutive model for the elastoplastic flow behavior as a function of temperature and humidity is proposed. To this end, the G'Sell–Jonas (1979, “Determination of the Plastic Behavior of Solid Polymers at Constant True Strain Rate,” J. Mater. Sci., 14, pp. 583–591) constitutive model for semicrystalline polymers is extended by incorporating, in addition to temperature, relationships between the material constants of this model and the measured relative humidity. By matching the proposed constitutive model to the experimental stress-strain data, useful material constants …

On Stresses Induced In A Thermal Barrier Coating Due To Indentation Testing, Jin Yan, Anette M. Karlsson, Marion Bartsch, Xi Chen

Mechanical Engineering Faculty Publications

Instrumented indentation has been suggested as a method to determine interfacial fracture toughness of thermal barrier coatings. However, in a previous experimental study we showed that the results are ambiguous. In this work, we investigate the experimental results by numerical simulations incorporating the material microstructure. In the numerical simulations, based on finite element analyses, the stress fields that are associated with the loading and unloading of the indenter are investigated. By comparing these stress fields to the damage observed in the experimental study, including crack path and interfacial delaminations, we explain key findings from the experimental observations. Our results suggest …

Time Relaxed Round Robin Tournament And The Nba Scheduling Problem, Renjun Bao

ETD Archive

This dissertation study was inspired by the National Basketball Association regular reason scheduling problem. NBA uses the time-relaxed round robin tournament format, which has drawn less research attention compared to the other scheduling formats. Besides NBA, the National Hockey League and many amateur leagues use the time-relaxed round robin tournament as well. This dissertation study is the first ever to examine the properties of general time-relaxed round robin tournaments. Single round, double round and multiple round time-relaxed round robin tournaments are defined. The integer programming and constraint programming models for those tournaments scheduling are developed and presented. Because of the …

Probabilistic Stress Analysis Of Liquid Storage Tank, Khader A. Khan

ETD Archive

Liquefied Natural Gas transport and storage has become very important due to its ability to occupy 1/600th of the volume that compressed natural gas would occupy at room temperature and atmospheric pressure. In the present work, an LNG storage tank has been computationally simulated and probabilistically evaluated in view of the several uncertainties in the fluid, structural, material and thermal variables that govern the LNG storage tank. A finite element code ALGOR was used to couple the thermal profiles with structural design. The stresses and their variations were evaluated at critical points on the storage tank. Cumulative distribution functions and …

Structural And Thermal Analysis Of Flange For Lng Applications, Mayank D. Kalbhor

ETD Archive

Structural and thermal analysis of the flange used in connection with hose for the transportation of LNG was computationally simulated by the method of finite element and probabilistically evaluated in view of the several uncertainties in the performance parameters. The distribution function and sensitivity factors for the maximum stresses were found out. The effect of various random variables including geometry, structural/thermal properties etc on the maximum stresses were studied probabilistically. These results were useful to identify the most critical random variable in order to optimize the design well before it is introduced in the market. This reduces the manufacturing cost …

Heat Transfer In Electroosmotic Flow Of Power-Law Fluids In Micro-Channel, Omkareshwar Rao Bakaraju

ETD Archive

The present study examines heat transfer in electro-osmotic flow of power-law fluids in a micro-channel analytically. The boundary layer equations governing the flow of power-law fluids in a micro-channel have been solved. Heat transfer characteristics such as the temperature distribution and Nusselt number are presented for parametric values of electro-kinetic parameter kH(where k-1 is the Debye length and H is semi-channel height of the micro-channel) and Brinkman number. Uniform surface heat flux boundary condition has been considered. The effects of the Brinkman number on the Nusselt number for specific values of the flow behavior index (n) are analytically determined. This …

Effect Of Rib Turbulators On Heat Transfer Performance In Stationary Ribbed Channels, Aravind Rohan Sampath

ETD Archive

The thermal performance was examined computationally for the stationary channels with rib turbulators oriented at 90 degrees. Ribs were placed on opposite walls and the heat transfer coefficients and frictional loss were calculated. Three stationary channels with aspect ratios (W/H) 1, 2 and 4 were considered for the analysis. The thermal performance was measured by calculating the Nusselt number and frictional losses. Square ribs (w/e = 1) were considered as the baseline configuration. The rib width and rib spacing varies while the rib height is maintained constant. Rib spacing (P/e) of 10 and 20 and rib width to rib height …

Wind Flow Induced Vibrations Of Tapered Masts, Ahmad Bani-Hani

ETD Archive

Structural dynamic analyses of elongated masts subjected to various wind speeds are presented in this work. The masts are modeled as vertically supported cantilever beams,with one end fixed to the ground, and the other end free. The external excitation forces acting of the masts are the results of vortex shedding represented by a sinusoidal time dependent functions. The frequencies of these sinusoidal functions are dictated by the Strouhal numbers associated of the flow regimes crossing over the masts. To enhance the vibratory behavior of a typical mast, under the influence of flow induced vibrations,three different mass distributions along the length …

Dynamic Analysis Of A Rotor Bearing System, Sandi Elhibir

ETD Archive

This thesis presents the results of the finite element analysis (FEA) approach for designing a Permanent Magnet Alternator (PMA). The PMA is configured as a cantilever hollow shaft supported by two identical rolling contact bearings. The performance requirements of the PMA are a maximum operating speed of 16,000 rpm, with a maximum shaft displacement of less than 0.010 in at its free end. The static and dynamic results of a cantilever beam was predicted by closed form solutions and verified to those results obtained from FEA for code validation. A mathematical model of a rotor-bearing system was proposed and analyzed …

Non-Collocation Problems In Dynamics And Control Of Mechanical Systems, Timothy M. Obrzut

ETD Archive

Characteristics of mechanical systems with non-collocated sensors and actuators are investigated. Transfer function zeros location as a function of sensor position, zero-pole interlacing, and re-location of zeros are discussed in a context of presented examples. Some of the presented examples involving non-collocation are supported by experimental data. A case study involving a high speed machining spindle is examined. The control problems associated with non-collocation are studied along with the methods to solve them

Smart Rotating Machines For Structural Health Monitoring, Dmitry Leonidovich Storozhev

ETD Archive

The objective of this thesis is to explore an innovative approach to the on-line health monitoring of rotating machinery in the presence of structural damage using active magnetic bearings (AMBs). First, the detailed model of the rotor with the breathing transverse crack is developed using finite element method. Next, the experimental data from the rotating magnetically levitated healthy and cracked shafts, under specially designed external excitation force, was collected, analyzed and compared with the computer simulation. The obtained results demonstrate that the presented on-line health monitoring technique is very effective for detection of the structural damage in rotating machinery, and …

Structural And Thermal Analysis Of Hose For Lng Applications, Bipin G. Kashid

ETD Archive

Finite element analysis (FEA) of the hose assembly used for transportation of Liquefied natural gas (LNG) has become a powerful tool in predicting the deformation and stress distributions. FEA helps in analyzing the model and optimizing the design in hostile environment. In the present work, computations are made to predict the maximum stresses caused due to structural and thermal effects in the LNG transportation. The analysis leads to the selection of the appropriate materials to be used and to the identification of both the most critical measurements and parameters. Most engineering design methods are deterministic, but in reality, many engineering …

Application Of The Actor-Critic Architecture To Functional Electrical Stimulation Control Of A Human Arm, Philip Thomas, Michael Branicky, Antonie Van Den Bogert, Kathleen Jagodnik

Mechanical Engineering Faculty Publications

Clinical tests have shown that the dynamics of a human arm, controlled using Functional Electrical Stimulation (FES), can vary significantly between and during trials. In this paper, we study the application of the actor-critic architecture, with neural networks for the both the actor and the critic, as a controller that can adapt to these changing dynamics of a human arm. Development and tests were done in simulation using a planar arm model and Hill-based muscle dynamics. We begin by training it using a Proportional Derivative (PD) controller as a supervisor. We then make clinically relevant changes to the dynamics of …

Concurrent Simulation Of Neuromuscular Control And Tissue Deformation Is Possible By Adaptive Surrogate Modeling, Jason P. Halloran, Ahmet Erdemir, Antonie J. Van Den Bogert

Mechanical Engineering Faculty Publications

No abstract provided.

Adaptive Surrogate Modeling For Efficient Coupling Of Musculoskeletal Control And Tissue Deformation Models, Jason P. Halloran, Ahmet Erdemir, Antonie J. Van Den Bogert

Mechanical Engineering Faculty Publications

Background

Finite element (FE) modeling and multibody dynamics have traditionally been applied separately to the domains of tissue mechanics and musculoskeletal movements, respectively. Simultaneous simulation of both domains is needed when interactions between tissue and movement are of interest, but this has remained largely impractical due to high computational cost.

Method of Approach

Here we present a method for concurrent simulation of tissue and movement, in which state of the art methods are used in each domain, and communication occurs via a surrogate modeling system based on locally weighted regression. The surrogate model only performs FE simulations when regression from …

Multiresolution Wavelet Analysis Of The Dynamics Of A Cracked Rotor, Jerzy T. Sawicki, Asok K. Sen, Grzegorz Litak

Mechanical Engineering Faculty Publications

We examine the dynamics of a healthy rotor and a rotor with a transverse crack, which opens and closes due to its self weight. Using discrete wavelet transform, we perform a multiresolution analysis of the measured vibration signal from each of these rotors. In particular, the measured vibration signal is decomposed into eight frequency bands, and the rms amplitude values of the healthy and cracked rotors are compared in the three lowest-frequency bands. The results indicate that the rms vibration amplitudes for the cracked rotor are larger than those of the healthy rotor in each of these three frequency bands. …