Engineering Commons^™

Technocene, Vir Joseph Naidu

Masters Theses

Embodied human communication within the Anthropocene. Existing at the intersection of technology, and the body.

The design industry has developed technology that is, paradoxically, isolating. The exposure to a vast audience in the digital sphere has introduced new societal pressures, leading to a disconnection from our immediate surroundings, detached, and donning metaphorical masks. Technocene lives on the fringes of the discipline by blending conceptual thinking with practical application. Through curious, experimental artifacts, it prompts us to shed our masks and embrace vulnerability. Technocene endeavors to reimagine the human experience by acting as a discursive design project. It probes the boundaries …

Artificial Intelligence Assisted Residual Strength And Life Prediction Of Fiber Reinforced Polymer Composites, Partha Pratim Das, Muthu Ram Prabhu Elenchezhian, Vamsee Vadlamudi, Rassel Raihan

Institute of Predictive Performance Methodologies (IPPM-UTARI)

With the increased use of composite materials, researchers have developed many approaches for structural and prognostic health monitoring. Broadband Dielectric Spectroscopy (BbDS)/Impedance Spectroscopy (IS) is a state-of-the-art technology that can be used to identify and monitor the minute changes in damage initiation, accumulation, interactions, and the degree of damage in a composite under static and dynamic loading. This work presents a novel artificial neural network (ANN) framework for fiber-reinforced polymer (FRP) composites under fatigue loading, which incorporates dielectric state variables to predict the life (durability) and residual strength (damage tolerance) from real-time acquired dielectric permittivity of the material. The findings …

In Depth Characterisation Of The Biomolecular Coronas Of Polymer Coated Inorganic Nanoparticles With Differential Centrifugal Sedimentation, André Perez-Potti, Hender Lopez, Beatriz Pelaz, Abuelmagd Abdelmonem, Mahmoud G. Soliman, Ingmar Schoen, Philip M. Kelly, Kenneth A. Dawson, Wolfgang J. Parak, Zeljka Krpetic, Marco P. Monopoli

Articles

Advances in nanofabrication methods have enabled the tailoring of new strategies towards the controlled production of nanoparticles with attractive applications in healthcare. In many cases, their characterisation remains a big challenge, particularly for small-sized functional nanoparticles of 5 nm diameter or smaller, where current particle sizing techniques struggle to provide the required sensitivity and accuracy. There is a clear need for the development of new reliable characterisation approaches for the physico-chemical characterisation of nanoparticles with significant accuracy, particularly for the analysis of the particles in the presence of complex biological fluids. Herein, we show that the Differential Centrifugal Sedimentation can …

Optimization Composition Of The Wood-Polymer Composition Based On Polyvinylchloride, Aliyev Sunnatulla, Ilkhamov Giyos, Jurayev Asror, Magrupov Farkhad

CHEMISTRY AND CHEMICAL ENGINEERING

The objective of the reaserch is to elaboration the composition of a wood-polymer composition based on polyvinyl chloride with improved performance properties. The influence of the components of the composition - modifiers, lubricants, regulators and stabilizers - on the properties of the composition was researched. Optimization of the composition of wood-polymer composition based on PVC made it possible to obtain a material with higher strength and fire resistance.

High-Efficient And New Technology For Producing 5-Nitro-2-Acetylaminobenzimidazole, Saidov Sarvar, Abdurazakov Askar, Karimov Rikhsibay, Khvan Alla

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of this work is to create new veterinary products for agriculture based on local raw materials, to develop a highly efficient technology for their production. Waste from the production of medamine produced in the pilot production of the Institute of Plant Chemistry of the Academy of Sciences of the Republic of Uzbekistan. The process of synthesis of 5-nitro-2-acetylaminobenzimidazole was studied by one-factor experiments. The structure of the obtained product was investigated by IR, Mass, 1H, 13C NMR spectroscopy. The main factors influencing the process of obtaining 5-nitro-2-acetylaminobenzimidazole were revealed. On the basis of the obtained research results, a …

Resource-Saving Technologies For The Production Of Elastic Leather Materials: Collective Monograph, Olena Korotych, Anatolii Danylkovych, Serhii Bilinskyi, Serhii Bondarenko, Slava Branovitska, Vasyl Chervinskyi, Nataliia Khliebnikova, Alona Kudzieva, Viktor Lishchuk, Nataliia Lysenko, Olena Mokrousova, Nataliia Omelchenko, Vera Palamar, Yuliia Potakh, Oksana Romanyuk, Olga Sanginova, Oleksandr Zhyhotsky

Chemistry Publications and Other Works

This monograph contains a collection of recent research papers focusing on advancing existing technologies and developing new technologies to improve the environmentally friendliness and save resources during the production of elastic leather materials. The papers are organized based on the type of technological process used to preserve raw hides. A lot of attention is devoted to mathematical planning, simulations, and multicriteria optimization of the technological processes using newly developed chemical reagents. The monograph contains a complex study of physicochemical properties and characteristics of the resulting leather materials. The developed technologies were tested by the private joint-stock company Chinbar (Kyiv, Ukraine) …

Developing An Equivalent Solid Material Model For Bcc Lattice Cell Structures Involving Vertical And Horizontal Struts, Tahseen A. Alwattar, Ahsan Mian

Mechanical and Materials Engineering Faculty Publications

In this study, a body-centered cubic (BCC) lattice unit cell occupied inside a frame structure to create a so-called “InsideBCC” is considered. The equivalent quasi-isotropic properties required to describe the material behavior of the InsideBCC unit cell are equivalent Young’s modulus ( E e ) , equivalent shear modulus ( G e ) , and equivalent Poisson’s ratio ( ν e ) . The finite element analysis (FEA) based computational approach is used to simulate and calculate the mechanical responses of InsideBCC unit cell, which are the mechanical responses of the equivalent solid. Two separates finite element models are then …

From Open Access To Open Science: The Path From Scientific Reality To Open Scientific Communication, Christian Heise, Joshua M. Pearce

Michigan Tech Publications

Although opening up of research is considered an appropriate and trend-setting model for future scientific communication, it can still be difficult to put open science into practice. How open and transparent can a scientific work be? This article investigates the potential to make all information and the whole work process of a qualification project such as a doctoral thesis comprehensively and freely accessible on the internet with an open free license both in the final form and completely traceable in development. The answer to the initial question, the self-experiment and the associated demand for openness, posed several challenges for a …

Structural Health Monitoring Of Fiber-Reinforced Composite Using Wireless Magnetostrictive Sensors, Sujjatul Islam, Relebohile George Qhobosheane, Muthu Ram Prabhu Elenchezhian, Vamsee Vadlamudi, Rassel Raihan, Kenneth Reifsnider

Institute of Predictive Performance Methodologies (IPPM-UTARI)

Composite materials are extending the horizons of designers in all branches of engineering. These materials have numerous advantages and improved structural properties such as high strength to weight ratio, high stiffness to weight ratio, lightweight, structural strength, and excellent durability. This has led to their use in several applications i.e. automobile, aircraft, and military defense devices. However, these materials experience various types of deformations and damage modes during their service life that are at times challenging to detect. This has led to the development of various non-destructive methods for structural health monitoring (SHM) of the damages in these complex material …

Plasmonic Metamaterials: Physical Background And Some Technological Applications, Benjamin G. Schmidt

Senior Honors Theses

New technological frontiers appear every year, and few are as intriguing as the field of plasmonic metamaterials (PMMs). These uniquely designed materials use coherent electron oscillations to accomplish an astonishing array of tasks, and they present diverse opportunities in many scientific fields.

This paper consists of an explanation of the scientific background of PMMs and some technological applications of these fascinating materials. The physics section addresses the foundational concepts necessary to understand the operation of PMMs, while the technology section addresses various applications, like precise biological and chemical sensors, cloaking devices for several frequency ranges, nanoscale photovoltaics, experimental optical computing …

Damage Precursor Identification In Composite Laminates Using Data Driven Approach, Muthu Ram Prabhu Elenchezhian, Vamsee Vadlamudi, Rassel Raihan, Kenneth Reifsnider

Institute of Predictive Performance Methodologies (IPPM-UTARI)

Composite materials are rapidly being used in commercial aviation and other day to day applications. The individual damage modes in composites are very well understood but it is the interaction of these local damage modes that leads to global failure. In the current research we intend to identify the damage precursors and the initiation of failure events in off axis unidirectional composite laminates loaded in quasi static uniaxial tension by measuring the dielectric response of the material by an in-situ technique using Broadband Dielectric Spectroscopy (BbDS). Using the variation of permittivity with strain, we are able to classify the stages …

Autojack - Hydraulic Powertrain System, Tyce Vu

All Undergraduate Projects

A primary problem for mechanics and automotive enthusiasts is the risk associated with lifting and securing a vehicle with conventional jack stands. Often times, improper jack-stand installation results in the vehicle collapsing unexpectedly, causing injury and/or death. This problem can be minimized through the application of a newly re-designed vehicle lifting system. The conventional method for lifting cars is time consuming and can be unsafe in many circumstances. A better, safer, and more efficient lift design was needed; the AutoJack. The approach of the AutoJack design was entirely focused on the safety of lifting a vehicle. Safety was improved by …

3d Printing – An Insider’S Perspective, Siddharth Sah

The STEAM Journal

The 3D printing market globally is still at its infancy, - or some might argue that there isn’t really a market yet. The knowledge of 3D printing design is still largely limited to engineering design – not product design. At MakeWhale, we are constantly pushing the boundaries of the application of 3D printing technology to consumer products resulting in a beautiful mix of technology and art.

Bridge Build, Andrew Little

Student Scholarship

Bridge build design that includes not only a building process, but a research paper to make the best build possible as well.

Speculations On A City For Mars, Edouard Terzis

School of Architecture - Theses

This thesis proposes the reinterpretation of architectural forms as the index of the constitution of the idea of the city. “Speculations on a City on Mars” is paradoxical in a sense as it superposes both the managerial representation of a city, that is Zoning, along with the speculative aspect of an extra-terrestrial city.

Exploring Earth-Building Technology For Liberia., Isaac Dompo Mayon

Electronic Theses and Dissertations

This paper discusses earth as a building material and the extent to which earth building technology has evolved over the years. In particular it addresses the adobe, compressed and rammed earth techniques of earth building as suitable techniques for Liberia consumption. In addition, the paper investigates the suitability of the Latosols soils of Liberia for earth building construction purposes using standardized earth building principles and requirements. A local Johnson City, Tennessee, earth sample found to have the same physical characteristics of the Latosols of Liberia was used to simulate Liberia soils to produce specimen blocks at different configurations of moisture …