Engineering Commons^™

Experimental And Simulation Study Of Reactive Silver Ink Droplet Evaporation, Weipeng Zhang

Electronic Thesis and Dissertation Repository

The evaporation of particle-free silver ink droplets on heated substrates directly impacts the morphology of the resultant silver particles and films. In this thesis, COMSOL Multiphysics simulations of the solvent (water-ethylene glycol mixture) droplet evaporation process are used to explain the microflows, mass transfers, and heat distribution responsible for the experimental observations. The reactive ink incorporates fluoro-surfactant FS-31 and poly (acrylamide) (PAM) to suppress the coffee-ring effect that negatively impacts the electrical conductivity. Experiments show that the droplet evaporation process results in varied silver particle morphology, depending on the locations within the droplet, leading to uneven surfaces. Large particles (3 …

Application Of Crystal Engineering In Multicomponent Pharmaceutical Crystals: A Study Of Theory And Practice, Soroush Ahmadi Nasrabadi

Electronic Thesis and Dissertation Repository

Multicomponent crystallization, a prominent strategy in crystal engineering, offers the ability to modify the physicochemical properties of crystals by introducing a secondary component to their lattice structure. Such multicomponent crystals have found widespread application in the pharmaceutical industry. This thesis explores the experimental screening, characterization, application, and theoretical prediction of multicomponent crystals of Active Pharmaceutical Ingredients (APIs).

The first case study investigates a new solvate of Dasatinib which exhibits high instability at room temperature and transforms into a different polymorph upon desolvation. The crystal structure of this compound is obtained, revealing insights into its transient nature and the potential application …

Use Of Electrochemical Techniques And Statistical Analysis To Investigate The Pitting Probability Of Copper, Sina Matin

Electronic Thesis and Dissertation Repository

The development of a safe permanent disposal plan is essential for the long-term disposal of used fuel bundles. Nuclear Waste Management Organization (NWMO) has been investigating the deep geologic disposal of nuclear waste which offers the optimum passive safety system with a negligible probability of release of radionuclides into the environment.

The proposed used fuel containers (UFC) for the permanent disposal of high-level nuclear waste in Canada is comprised of a carbon steel vessel coated with a 3 mm corrosion-resistant copper layer deposited using a combination of electrodeposition and cold spray deposition. Although copper is often considered to be thermodynamically …

Near-Ir Laser Ablation Of Simulated Radiologically Contaminated Oxides On Carbon Steel Feeder Pipes, Thao Viet Do

Electronic Thesis and Dissertation Repository

As nuclear power plants age and retire from service, many countries face significant challenges concerning the safe long-term storage and disposal of large volumes of low and intermediate level radioactive wastes (L&ILW). The volumes of metallic waste are of particular concern, as when metal corrodes it produces hydrogen that could lead to pressure build-up in interim storage and disposal. In Canada, a significant fraction of the metallic wastes for Canada Deuterium Uranium (CANDU) nuclear reactors are out-of-core reactor components, such as carbon steel (CS) feeder pipes. The radioactive contamination is expected to be largely confined to the surface oxide layers …

Development Of Advanced Solid-State Electrolytes And Interfaces For High-Performance Sulfide-Based All-Solid-State Lithium Batteries, Feipeng Zhao

Electronic Thesis and Dissertation Repository

All-solid-state lithium batteries (ASSLBs) have become increasingly attractive due to the demand of high-energy-density and high-safety lithium-ion batteries for electric vehicles (EVs). As the core component of ASSLBs, solid-state electrolytes (SSEs) are regarded as essential to determine the electrochemical performance of ASSLBs. The inorganic SSEs is one of the most important categories in all developed SSEs, representing the advance of superionic lithium conductors as well as the cornerstone to construct flexible polymer/inorganic composite SSEs. The sulfide-based inorganic SSE is one of the most promising SSEs that is receiving a lot of attentions, because only sulfide SSEs can show ultrahigh ionic …

Electronic And Local Structures Of Pt-Based Bimetallic Alloy And Core-Shell Systems, Jiatang Chen

Electronic Thesis and Dissertation Repository

This thesis investigates the electronic structure of Pt for catalysis applications. The importance of the Pt 5d band is discussed in terms of the bonding capability of Pt. The oxygen reduction reaction in proton exchange membrane fuel cells is chosen as the catalytic reaction model to illustrate the effect of Pt 5d states on Pt-O interaction. Pt-based bimetallic systems are introduced as a solution for the high price and limited resources of Pt. Despite lower usage of Pt, the tuning capability to optimize the Pt 5d band in bimetallic catalysts is supposed to provide superior catalytic activity. Advanced synchrotron X-ray …

Nonlinear Dynamics Of Carbon Steel Corrosion Under Gamma Radiation, Youn Gyeong Shin

Electronic Thesis and Dissertation Repository

Corrosion of materials is still an unresolved problem affecting a multitude of industries. One of the grand challenges facing the corrosion community is the development of high-fidelity models for corrosion in actual service environments. The difficulties arise since corrosion involves transfer of metal atoms between the solid and solution phases thus making the system non-adiabatic. Interfacial transfer of atoms increases the chance of establishing systemic feedback between chemical reactions and transport processes, which results in chemical oscillation and periodic patterns on the corroding surfaces. These oscillating behavior in electrochemical measurements and pattern formation on corroding surfaces have been reported in …

High-Pressure Studies On The Transition From Red Phosphorus To Black Phosphorus, Heng Xiang

Electronic Thesis and Dissertation Repository

Black phosphorus (BP) is a promising material in many research fields. However, the transition process from amorphous red phosphorus (ARP) is elusive and hence hinders large scale synthesis and applications. This work describes the application of the high-pressure method to study the transition process from ARP to BP.

In this thesis, the following three objectives were achieved: (1) to understand the mechanism of the transition, (2) to facilitate the synthesis of BP by taking the advantage of less pure ARP, (3) to propose new methods of synthesizing BP-based materials, such as the moderately oxidized BP and the black phosphorus/ amorphous …

Novel Avenues Toward Controlling The Photophysical Properties Of Ultra-Small Silicon Quantum Dots, Mohammed Abdelhameed

Electronic Thesis and Dissertation Repository

Quantum dots (QDs) have attracted an increasing attention in the last decade over many conventional organic dyes. This is due to their unique optical properties including broad absorption spectra, high photostability, and size-tunable photoluminescence (PL). However, some toxicity concerns associated with traditional quantum dots have hindered their wide applicability. Interestingly, silicon quantum dots (SQDs) have been shown to be more advantageous than most of QDs thanks to their excellent biocompatibility and biodegradability, low cytotoxicity, and versatile surface functionalization capability. Thus, SQDs are promising candidates for various biological and biomedical applications such as bioimaging, biosensing, and photodynamic therapy. Unfortunately, only a …

Shape-Controlled Nanoparticles As Effective Catalysts For Proton Exchange Membrane (Pem) Fuel Cells, Ali Feizabadi

Electronic Thesis and Dissertation Repository

Polymer electrolyte membrane fuel cell (PEMFC), is considered a promising candidate for the next generation power sources in transportation, stationary and portable applications. However, oxygen reduction reaction (ORR), one of the key reactions occurring on PEMFC is kinetically slow; this has limited performance and further advancement in this kind of fuel cells. Thus, improving the PEMFC efficiency requires a thorough understanding of the ORR mechanism on the desired catalyst. To address the above-mentioned demands, the scope of this thesis is focused on the fundamental understanding of facet-controlled nanoparticles, metal-support interactions, and bimetallic platinum catalysts, utilizing synchrotron-based X-ray absorption, X-ray photoelectron …

Development Of In Situ Forming Hydrogels For Intra-Articular Drug Delivery, Andy Prince

Electronic Thesis and Dissertation Repository

Hydrogels are 3-dimensional crosslinked polymer networks that can absorb significant amounts of water. The physical properties associated with hydrogels affords them resemblance to biological tissues making them good candidates for biomedical applications. Many pharmaceuticals, specifically non-steroidal anti-inflammatory drugs (NSAIDs), have poor aqueous solubility, which limits their bioavailability and efficacy. People suffering from chronic osteoarthritis (OA) are required to frequently take large doses to mitigate pain, which can lead to serious side effects. Hydrogels are good strategies to deliver NSAIDs via articular injection because they can form solid gels in situ. This thesis describes the synthesis, formulation, mechanical testing, in …

Corrosion Dynamics Of Carbon Steel In Used Fuel Container Environments, Dan Guo

Electronic Thesis and Dissertation Repository

The current Canadian used nuclear fuel container (UFC) design uses a pressure‑grade carbon steel (CS) vessel with its outer surface coated with a thin layer of copper. One concern regarding the structural integrity of the UFC design is the potential internal corrosion of the CS vessel. Moisture trapped inside a UFC could condense within the gap between the hemispherical head and the cylindrical body of the vessel. The internal UFC environment will be exposed to a continuous flux of ionizing radiation arising from the decay of radionuclides trapped in the used UO₂ fuel matrix.

This thesis research project investigates …

Gamma-Radiation Induced Corrosion Of Alloy 800, Mojtaba Momeni

Electronic Thesis and Dissertation Repository

This thesis presents a newly developed mechanism and predictive model for the corrosion of Alloy 800. The Fe-Cr-Ni Alloy (Incoloy 800) is mainly used for steam generator (SG) tubing in CANDU and PWR reactors and is a candidate material for the proposed Canadian Supercritical Water Reactor (SCWR) in which it will be exposed to extreme conditions of high radiation flux and large temperature gradients. The influence of gamma radiation and water chemistry conditions on the corrosion behaviour of Alloy 800 are studied in this work. Ionizing radiation creates reducing (•e_aq^–, •H, •O₂^-) and oxidizing …

Nanostructured Air Electrodes And Electrochemical Reaction Mechanism Studies For Sodium-Oxygen Batteries, Hossein Yadegari

Electronic Thesis and Dissertation Repository

Alkali metal-O₂ batteries, i.e. Li- and Na-O₂, are considered as the next generation of energy saving technologies with potential application in electric transportation. The high theoretical energy density in these cells is related to the use of high energy alkali metals as negative and oxygen as the positive electrode materials. The performance of alkali metal-O₂ cells is highly dependent on the positive electrode material, where oxygen reduction and evolution reactions take place. Besides, the primary products of oxygen reduction reaction in these cells are typically metal oxides, which are insoluble in nonaqueous electrolytes, resulting in accumulation …

Exploring The Chemistry Of Phosphorus For Photopolymer Applications, Ryan Guterman

Electronic Thesis and Dissertation Repository

Prior to this thesis, phosphorus-containing polymers and photopolymerization represented two distinct, non-overlapping fields of study. This thesis examined the prospect of combining these two approaches to create a system possessing the benefits of both techniques. By exploiting the chemistry of phosphorus, and using photopolymerization as a fabrication method, new materials were developed and assessed for their use in various applications.

Among the many phosphorus compounds that may be used in polymer science, phosphonium salts and primary phosphines were of specific focus. First, highly fluorinated phosphonium monomers were developed to create photopolymerized hydrophobic surfaces. A structure-activity relationship was established, as both …

Production And Applications Of Formaldehyde-Free Phenolic Resins Using 5-Hydroxymethylfurfural Derived From Glucose In-Situ, Yongsheng Zhang

Electronic Thesis and Dissertation Repository

The phenol-formaldehyde (PF) resin manufacturing industry is facing a growing challenge with respect to concerns over human health, due to the use of carcinogenic formaldehyde and sustainability due to the use of petroleum-based phenol in PF resin manufacture. Glucose and its derivative, 5-hydroxymethylfurfural (5-HMF), have proven to be potential substitutes for formaldehyde in the synthesis of phenolic novolac resins.

This thesis investigated a number of glucose and 5-HMF resin systems including the curing of phenol-glucose novolac resin (PG) with a bis-phenol-A type epoxy. The curing process was modeled according to the Sestak-Berggren equation (S, B) using Málek methods. This was …

Surface Functionalization And Bioconjugation Of Nanoparticles For Biomedical Applications, Longyan Chen

Electronic Thesis and Dissertation Repository

Colloidal inorganic nanoparticles (NPs) have been attracting considerable interest in biomedicine, from drug and gene delivery to imaging, sensing and diagnostics. It is essential to modify the surface of nanoparticles to have enhanced biocompatibility and functionality for the in vitro and in vivo applications, especially in delivering locally and recognizing biomolecules. Herein, the goal of this research work is to develop advanced NPs with well-tailored surface functionalities and/or bio-functionality for the applications in cell tracking and analytes detection.

In the first project, quantum dots incorporating with gelatin nanoparticles (QDs-GNPs) have been developed for bioimaging applications. Two different approaches have been …

Carbon Nitride And Conjugated Polymer Composite Materials, Josh Byers

Electronic Thesis and Dissertation Repository

The semiconductor and photovoltaic properties of carbon nitride (CNx) thin films prepared using a reactive magnetron sputtering technique were investigated both individually and as composites with the organic conjugated polymers polybithiophene (PBT) and poly(3-hextlthiophene) (P3HT). At low nitrogen content, the film structure was dominated by graphitic sp² percolation networks, whereas at higher nitrogen contents CNx films started to demonstrate semiconductor properties, as evidenced by the occurrence of photoconductivity and the development of a space charge region. When CNx was deposited onto a PBT substrate, it was found to function as an acceptor material improving the photocurrent generation both in …

Synthesis Of Silicide Nanomaterials Using Chemical Vapour Deposition Method, Hamid Norouzi Banis

Electronic Thesis and Dissertation Repository

Recent research has evidenced that nanotechnology may bring about a material revolution which sweeps through different scientific fields and leads to dramatic changes in the use of natural resources and our everyday life. Compared to their bulk counterparts, the nanomaterials may exhibit significantly improved physical properties by shrinking their size to nanometer scale. Metal silicide are distinguished by their features of combining advantages of both metals and semiconductors which promises superior performance various fields. Despite the progress in the synthesis methods of nanomaterials, it still remains a big challenge in controlled synthesis of 1D silicide nanostructures due to the difficulties …

Solid-State Nuclear Magnetic Resonance Spectroscopy Of Unreceptive Quadrupolar Nuclei In Inorganic Materials, Andre Sutrisno

Electronic Thesis and Dissertation Repository

Preparation and characterization of inorganic materials is a crucial practice because understanding the relationship between structure and property is important for improving current performance and developing novel materials. Many metal centers in technologically and industrially important materials are unreceptive low-γ quadrupolar nuclei (i.e., possessing low natural abundance, low NMR frequencies and large quadrupole moments) and they usually give rise to very broad NMR resonances and low signal-to-noise ratios, making it difficult to acquire their solid-state NMR spectra. This thesis focuses on the characterization of inorganic materials using solid-state NMR (SSNMR) spectroscopy at very high magnetic field of …

Electronic And Magnetic Excitations In Graphene And Magnetic Nano-Ribbons, Maher Zakaria Ahmed Selim

Electronic Thesis and Dissertation Repository

The discovery of graphene - a 2D material with superior physical properties - in 2004 was important for the intensive global research to find alternatives to three-dimensional (3D) semiconductor materials in industry. At the same time there have been exciting advances for 2D magnetic materials on the nanometer scale. The superior properties of graphene are mainly attributed to its crystal structure and its relatively short-range interactions. These properties show that natural and artificial 2D materials are promising for new applications.

In this thesis we have carried out a comprehensive investigation of the effects of the 2D lattice structures, the roles …

The Effect Of The Environment On The Corrosion Products And Corrosion Rates On Gas Transmission Pipelines, Brent Sherar

Electronic Thesis and Dissertation Repository

This thesis reports a series of investigations examining external corrosion processes along gas transmission pipelines. TransCanada PipeLines Ltd. (TCPL) has developed six proposed corrosion scenarios to describe external pipeline corrosion, based primarily on corrosion products and corrosion rates (CRs) observed at field sites. The six proposed corrosion scenarios can be divided into two groups: abiotic and biotic. The three abiotic corrosion scenarios are (1) anaerobic corrosion, (2) aerobic corrosion, and (3) anaerobic corrosion turning aerobic; while (4) anaerobic corrosion with microbial effects, (5) aerobic corrosion turning anaerobic with microbial effects, and (6) anaerobic corrosion with microbial effects turning aerobic comprise …