Engineering Commons^™

Optimizing Production Schedule With Energy Consumption And Demand Charges In Parallel Machine Setting, Farnaz Ghazi Nezami, Mojtaba Heydar, Regina Berretta

Industrial & Manufacturing Engineering Presentations And Conference Materials

Environmental sustainability concerns, along with the growing need for electricity and associated costs, make energy-cost reduction an inevitable decision-making criterion in production scheduling. In this research, we study the problem of production scheduling on nonidentical parallel machines with machine-dependent processing times and known job release dates to minimize total completion time and energy costs. The energy costs in this study include demand and consumption charges. We present a mixed-integer nonlinear model to formulate the problem. The model is then linearized and its performance is tested through numerical experiments.

Achieving Totally Local Anticoagulation On Blood Contacting Devices, Rana Gbyli, Anna Mercaldi, Harihara Sundaram, Kagya Amoako

Mechanical and Industrial Engineering Faculty Publications

The recent years have witnessed an increased activity in biocompatibility research aimed at limiting biomaterial-induced blood coagulation. From 2008 to 2016, a total of $36,946,764.00 USD was awarded in grants to 213 research proposals and as large as 50.4% ($18,627,854.00) of that award monies were distributed to 101 proposals over the fiscal years of FY14 to FY16 alone. However, the complexity in blood responses to biomaterials, variability in blood function between individuals and animal species, and differences in medical device application and test setting all continue to pose difficulties in making a breakthrough in this field. This review focuses on …

Development And Field Testing Of An Interactive Transit Station Information System (Itsis) Using Connected Vehicle Technologies, Huadong Meng, Jacob Tsao, Kun Zhou, Justin Picar, Bradley Mizuno, Wei-Bin Zhang

Faculty Publications

The objective of Interactive Transit Station Information System (ITSIS) is to better inform transit travelers during their trips and to enable dynamic transit operations to better serve travelers. The ultimate goal is to make transit more friendly and attractive to the traveling population such that transit will become a viable choice for travel and an integrated part of the solution for congestion relief. This report documents a research effort to develop and test a ITSIS prototype that uses Connected Vehicle technologies to enable the real-time interaction between passengers and transit systems at bus stations. The reports summarizes the findings from …

Utilizing Functional Near-Infrared Spectroscopy For Prediction Of Cognitive Workload In Noisy Work Environments, Ryan Gabbard, Mary E. Fendley, Irfaan A. Dar, Rik Warren, Nasser H. Kashou

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Occupational noise frequently occurs in the work environment in military intelligence, surveillance, and reconnaissance operations. This impacts cognitive performance by acting as a stressor, potentially interfering with the analysts’ decision-making process. We investigated the effects of different noise stimuli on analysts’ performance and workload in anomaly detection by simulating a noisy work environment. We utilized functional near-infrared spectroscopy (fNIRS) to quantify oxy-hemoglobin (HbO) and deoxy-hemoglobin concentration changes in the prefrontal cortex (PFC), as well as behavioral measures, which include eye tracking, reaction time, and accuracy rate. We hypothesized that noisy environments would have a negative effect on the participant in …

Quantitative Analysis Of Regenerative Energy In Electric Rail Traction Systems, Mahmoud Saleh, Oindrilla Dutta, Yusef Esa, Ahmed Mohamed

Publications and Research

This paper aims at determining the influential factors affecting regenerative braking energy in DC rail transit systems. This has been achieved by quantitatively evaluating the dependence of regenerative energy on various parameters, such as vehicle dynamics, train scheduling, ground inclination and efficiency of the electrical devices. The recuperated power and energy have been presented by a mathematical model, comprising of a set of empirical forms, which allows for thorough analysis. A detailed simulation model of a typical DC-traction system has been developed to validate the developed empirical forms. The results verified the validity of the proposed mathematical model, and demonstrated …

Performance Evaluation Of Reverse Logistics Enterprise – An Agent-Based Simulation Approach, Gowtham Ravi Sankara Pandian, Walid Abdul-Kader

Industrial and Manufacturing Systems Engineering Publications

Reverse logistics (RL) has been applied in many industries and sectors since its conception. Unlike forward logistics, retracing consumer goods from the point of consumption to the point of inception is not a well-studied process. It involves many uncertainties such as time, quality and quantity of returns. The returned products can be remanufactured, have parts harvested, or be disposed safely. It is important to implement these activities in a cost-effective manner. The aim of this research is to measure the performance of the RL enterprise with the help of an agent-based simulation model. The major entities in the RL network …

Macrodamage Accumulation Model For A Human Femur, Farah Hamandi, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

The objective of this study was to more fully understand the mechanical behavior of bone tissue that is important to find an alternative material to be used as an implant and to develop an accurate model to predict the fracture of the bone. Predicting and preventing bone failure is an important area in orthopaedics. In this paper, the macrodamage accumulation models in the bone tissue have been investigated. Phenomenological models for bone damage have been discussed in detail. In addition, 3D finite element model of the femur prepared from imaging data with both cortical and trabecular structures is delineated using …

Split-Merge Model Of Workunit Replication In Distributed Computing, Alexander Rumyantsev, Srinivas R. Chakravarthy

Industrial & Manufacturing Engineering Presentations And Conference Materials

No abstract provided.

Strategic Level Proton Therapy Patient Admission Planning: A Markov Decision Process Modeling Approach, Shengfan Zhang, Ridvan Gedik, Chase Rainwater

Mechanical and Industrial Engineering Faculty Publications

A relatively new consideration in proton therapy planning is the requirement that the mix of patients treated from different categories satisfy desired mix percentages. Deviations from these percentages and their impacts on operational capabilities are of particular interest to healthcare planners. In this study, we investigate intelligent ways of admitting patients to a proton therapy facility that maximize the total expected number of treatment sessions (fractions) delivered to patients in a planning period with stochastic patient arrivals and penalize the deviation from the patient mix restrictions. We propose a Markov Decision Process (MDP) model that provides very useful insights in …

A Constraint Programming Approach For The Team Orienteering Problem With Time Windows, Ridvan Gedik, Emre Kirac, Ashlea Bennet Milburn, Chase Rainwater

Mechanical and Industrial Engineering Faculty Publications

The team orienteering problem with time windows (TOPTW) is a NP-hard combinatorial optimization problem. It has many real-world applications, for example, routing technicians and disaster relief routing. In the TOPTW, a set of locations is given. For each, the profit, service time and time window are known. A fleet of homogenous vehicles are available for visiting locations and collecting their associated profits. Each vehicle is constrained by a maximum tour duration. The problem is to plan a set of vehicle routes that begin and end at a depot, visit each location no more than once by incorporating time window constraints. …

Brain Lesions Among Orally Fed And Gastrostomy-Fed Dysphagic Preterm Infants: Can Routine Qualitative Or Volumetric Quantitative Magnetic Resonance Imaging Predict Feeding Outcomes?, Nasser H. Kashou, Irfaan Akram Dar, Mohamed A. El-Mahdy, Charles Pluto, Mark Smith, Ish K. Gulati, Warren Lo, Sudarshan R. Jadcherla

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Introduction: The usefulness of qualitative or quantitative volumetric magnetic resonance imaging (MRI) in early detection of brain structural changes and prediction of adverse outcomes in neonatal illnesses warrants further investigation. Our aim was to correlate certain brain injuries and the brain volume of feeding-related cortical and subcortical regions with feeding method at discharge among preterm dysphagic infants.

Materials and methods: Using a retrospective observational study design, we examined MRI data among 43 (22 male; born at 31.5 ± 0.8 week gestation) infants who went home on oral feeding or gastrostomy feeding (G-tube). MRI scans were segmented, and volumes of brainstem, …

Carbon Footprint Stock Analysis Of U.S. Manufacturing: A Time Series Input-Output Lca, Gokhan Egilmez, Khurrum Bhutta, Bulent Erenay, Yong Shin Park, Ridvan Gedik

Mechanical and Industrial Engineering Faculty Publications

The purpose of this paper is to provide an input-output life cycle assessment model to estimate the carbon footprint of US manufacturing sectors. To achieve this, the paper sets out the following objectives: develop a time series carbon footprint estimation model for US manufacturing sectors; analyze the annual and cumulative carbon footprint; analyze and identify the most carbon emitting and carbon intensive manufacturing industries in the last four decades; and analyze the supply chains of US manufacturing industries to help identify the most critical carbon emitting industries.

Condition Assessment Of End-Of-Use Products For Remanufacturing, Jovan Morgan

Research Opportunities for Engineering Undergraduates (ROEU) Program 2016-17

The goal of the project is to use the automated 3-D laser scanner using a Capnut as a test object to detect surface defects, corrosion and calculation error through offline quality inspection. potentially reducing labor time and cost for both consumers and manufacturers.

Modeling Of Selective Laser Sintering/ Selective Laser Melting, Xuan Wang, Connor West

Industrial and Manufacturing Engineering

Selective laser sintering and selective laser melting are powder based additive manufacturing (AM) process that can rapidly manufacture parts with comparable mechanical properties to conventional manufacturing methods directly from digital files. However, the processing recipe development and design optimization of AM parts are often based on trial and error which erodes the benefit of AM. Modeling is a powerful tool to enable faster development cycle by significantly reducing the experimental efforts. In this paper we discussed the current status of selective laser sintering/melting modeling, in which the laser and powder interaction was studied to understand and predict the process and …

Probabilistic Analysis Of Wear Of Polymer Material Used In Medical Implants, V. Perel, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Probabilistic methods are applied to the study of fatigue wear of sliding surfaces. A variance of time to failure (to occurrence of maximum allowable wear depth) is evaluated as a function of a mean wear rate of normal wear and a size of wear particles. A method of estimating probability of failure-free work during a certain time interval (reliability) is presented. An effect of the bedding-in phase of wear on the reliability is taken into account. Experimental data for Ultra High Molecular Weight Polyethylene (UHMWPE) cups of artificial hip implants is used to make numerical calculations.

See The Bigger Picture: A True Systems Approach To Healthcare, Brian J. Galli

Faculty of Computer Science/Management Engineering Publications

“Healthcare” is typically related directly to patient care, hospitals, and ambulatory services, but it is important to see that healthcare is beyond just the delivery of care in hospitals or ambulatory services. A more accurate systems approach to views the world of healthcare as one that involves several stakeholders, including: healthcare delivery (patient care in hospitals and ambulatory services), regulatory agencies, health insurance/health plan organizations, medical device design and manufacturers, pharmaceuticals, society, government (all levels), and healthcare reform organizations. All of these stakeholders relate to each other in many levels and impact our healthcare system.

This paper will cover the …

Three-Dimensional Container Loading: A Simulated Annealing Approach, Hanan Mostaghimi Ghomi, Bryan Gary St. Amour, Walid Abdul-Kader

Industrial and Manufacturing Systems Engineering Publications

High utilization of cargo volume is an essential factor in the success of modern enterprises in the market. Although mathematical models have been presented for container loading problems in the literature, there is still a lack of studies that consider practical constraints. In this paper, a Mixed Integer Linear Programming is developed for the problem of packing a subset of rectangular boxes inside a container such that the total value of the packed boxes is maximized while some realistic constraints, such as vertical stability, are considered. The packing is orthogonal, and the boxes can be freely rotated into any of …

Survey Of Lean Management Practices In Pakistani Industrial Sectors, Khurrum Bhutta, Gokhan Egilmez, Kamran Chatha, Faizul Huq

Mechanical and Industrial Engineering Faculty Publications

This research was undertaken to study the implementation and adoption of Lean management practices across several industrial sectors in Pakistan. A total of 100 companies were surveyed across five industries. The objective was to determine if there was disparity in the implementation of Lean practices and to provide a yardstick to measure that disparity. Furthermore, this study identified Lean management best practices across several industries in Pakistan, thus providing benchmarks for other industrial sectors. The data collected was analysed using various descriptive statistical methods. The results indicated robust adoption and implementation of Lean practices in Pakistani industry, though there were …

From Green Buildings To Green Supply Chains: An Integrated Input Output Life Cycle Assessment And Optimization Framework For Carbon Footprint Reduction Policy Making, N. Muhammad Aslaam, Gokhan Egilmez, Murat Kucukvar, M.Khurrum S. Butta

Mechanical and Industrial Engineering Faculty Publications

Purpose: This paper focuses on tracing GHG emissions across the supply chain industries associated with the U.S. residential, commercial and industrial building stock and provides optimized GHG reduction policy plans for sustainable development.

Design/Methodology/Approach: A two-step hierarchical approach is developed. Firstly, Economic Input Output-based Life Cycle Assessment (EIO-LCA) is utilized to quantify the GHG emissions associated with the U.S. residential, commercial and industrial building stock. Secondly, a mixed integer linear programming (MILP) based optimization framework is developed to identify the optimal GHG emissions’ reduction (%) for each industry across the supply chain network of the U.S. economy.

Findings: The results …