Engineering Commons^™

Distributed Electrical Power System In Cubesat Applications, Robert Burt

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The cubesat spacecraft was conceived over ten years ago. Since that time, close to 100 cubesat satellites have either been launched or are in the process of construction. Although started as an educational teaching tool, the cubesat is gaining popularity in the satellite industry and is making inroads as a standard architecture for many nano and pico satellite applications. The electrical power system for the cubesat class satellites almost exclusively conforms to a centralized architecture.

This thesis researches the potential of using a distributed architecture for the cubesat power system. There are several key advantages of a distributed architecture that …

140 New Montgomery Power Distribution Design, Stephen Shaffer

Electrical Engineering

The Power Distribution Design for a high-rise building requires a great deal of coordination and design from the structural, electrical, mechanical, telecommunication, and PG&E engineers. This report will cover how I was able to coordinate and design the power distribution system for 140 New Montgomery, a 28 story building located in San Francisco. Furthermore, this report will cover the steps taken in the future to ensure a smooth transition from the schematic design phase to the construction document phase.

Benefits Of Near-Term Cloud Location Forecasting For Large Solar Pv, Timothy Robert Rudd

Master's Theses

As the ‘green’ energy movement continues to gain momentum, photovoltaic generation is becoming an increasingly popular source for new power generation. The primary focus of this paper is to demonstrate the benefits of close-to real-time cloud sensing for Photovoltaic generation. In order to benefit from this close-to real-time data, a source of cloud cover information is necessary. This paper looks into the potential of point insolation sensors to determine overhead cloud coverage. A look into design considerations and economic challenges of implementing such a monitoring system is included. The benefits of cloud location sensing are examined using computer simulations to …

Android Application Controlled Surge Protector, Lok An

Electrical Engineering

A significant amount of consumer electronics cannot be switched off completely without being unplugged. Standby power, also known as phantom power, refers to the electric power consumed by electronic appliances when they are switched off. There are some devices that need constant power; items like alarm clocks and security systems need constant power to function correctly. Some devices, such as video game consoles and televisions, consume power without offering any features. Electricity lost from standby power has been increasing with the amount of consumer electronics increasing in households.

This project’s goal is to create a low power remote that can …

Off-Grid Photovoltaic System Design Project, Brian Duffy

Electrical Engineering

This project uses the BP SX 150S solar panel to charge a 12 V battery. This battery powers an AIMS 400 W Modified Sine Wave Inverter to provide 120 V RMS AC power to a load of up to 40 W. Inverter efficiency was measured at different load conditions. A control circuit was implemented to prevent overcharging or over-discharging of the battery, by disconnecting it from the panel or the load, respectively. The control circuit turn-on and cutoff voltages were measured versus battery voltage, and the on-resistance of the MOSFET switches was measured for various load currents. A table of …

Free Space Optical Communications With High Intensity Laser Power Beaming, Daniel Edward Raible

ETD Archive

This research demonstrates the feasibility of utilizing high intensity laser power beaming (HILPB) systems as a conduit for robust free-space optical communications over large distances and in challenging atmospheric conditions. The uniqueness of vertical multi-junction (VMJ) photovoltaic cells used in HILPB systems in their ability to receive and to convert at high efficiency, very high intensity laser light of over 200 W/cm2, presents a unique opportunity for the development of the robust free space optical communication system by modulating information signals onto the transmitted high intensity photonic energy. Experiments were conducted to investigate and validate several optical communications concepts. A …

Hydro-Electric Generation System For The Dc House Project, Dennis Kwan, Mitchell Krug

Electrical Engineering

This paper focuses on the design, integration, and construction of a system that harnesses energy from flowing water. The system will be used in conjunction with the DC House Project. The proposed system employs a DC generator and DC-DC Boost-converter to provide electricity to the DC House at approximately 200-300W. Results of the testing and measurement show that the goal of the system is feasible, but currently limited. The generator could not output the specified power. Details of the design, along with ideas for further improvement, are presented in this report.

Real-Time Fault Diagnosis Of Automotive Electrical Power Generation And Storage System, Luis Farfan-Ramos

Browse all Theses and Dissertations

Automobiles depend more and more on electric power. Analysis of warranty data by automotive OEMs shows that faults in the automotive electrical power generation and storage (EPGS) system are often misdiagnosed. Therefore, monitoring of the state of health (SOH) of the automotive EPGS system is vital for early and correct diagnosis of faults in it, ensuring a reliable supply of electric power to the vehicle and reducing maintenance costs. In this research project, a model-based SOH monitoring method for the EPGS system is developed without the requirement of an alternator current sensor. A model representing the dynamic relationship between the …