Hybrid Photovoltaic + Battery Energy System Grid-Tied Converter Capstone Review Thesis, Archer Taylor

University Honors Theses

Hybrid power converters present an opportunity to more efficiently harness energy from renewable sources. This paper reviews an undergraduate senior capstone project with the goal of designing and verifying the benefits of a hybrid converter, combining a photovoltaic array, battery energy system and a DC-AC inverter. The author recounts their experience throughout the 6 month period, detailing the research and design process followed by the prototype testing. Additionally, they reflect on the struggles of the capstone team and how to apply the learnings in the future.

Evaluation Of Single Phase Smart Pv Inverter Functions In Unbalanced Residential Distribution Systems, Darren Symonette

Graduate Theses and Dissertations

In the United States, smart PV inverters integrated with residential distribution systems are becoming a more common occurrence. With integration of smart PV inverters, power utilities are experiencing an increase of number of operations with regards to switched capacitor banks, voltage regulators and on load tap changers. These increases can lead to excess wear and tear on the devices causing power utilities to perform unwanted replacement and maintenance. However, smart PV inverters when controlled under specific functions can enable these inverters to provide reactive power and voltage control which in turn lowers the number of operations for switched capacitor banks, …

Improving The Programmability Of Networked Energy Systems, Noman Bashir

Doctoral Dissertations

Global warming and climate change have underscored the need for designing sustainable energy systems. Sustainable energy systems, e.g., smart grids, green data centers, differ from the traditional systems in significant ways and present unique challenges to system designers and operators. First, intermittent renewable energy resources power these systems, which break the notion of infinite, reliable, and controllable power supply. Second, these systems come in varying sizes, spanning over large geographical regions. The control of these dispersed and diverse systems raises scalability challenges. Third, the performance modeling and fault detection in sustainable energy systems is still an active research area. Finally, …

Model Predictive Control For Grid Scale Pv And Battery, Sahithi Chatradi

Theses and Dissertations

Model Predictive Control (MPC) is a control technique that uses prediction data to optimize costs over a given predictive horizon. There are many papers that use this technique to optimize cost in a substantially loaded microgrid, but these techniques are not feasible for utility-scale PV+Storage facility. In this study, MPC is used to optimize the cost for a utility-scale PV+Storage facility, by adding a factor of a possible curtailment. The thesis also presents the various factors that the MPC has in that utility size grid. These factors include line losses, net yield, and curtailment.

Robust Control Strategies For Optimal Operation Of Distributed Generation In Smart Microgrids, Chi-Thang Phan-Tan

Theses

The high penetration of PV systems and fast communications networks increase the potential for PV inverters to support the stability and performance of smart grids and microgrids. PV inverters in the distribution network can work cooperatively and follow centralized and decentralized control commands to optimize energy production while meeting grid code requirements. However, there are older autonomous inverters that have already been installed and will operate in the same network as smart controllable ones. This research proposes a decentralized optimal control (DOC) that performs multi-objective optimization for a group of PV inverters in a network of existing residential loads and …

Performance Loss Rate And Temperature Modeling In Predictive Energy Yield Programs For Utility-Scale Solar Power Plants, Katelynn M. Dinius

Master's Theses

The Gold Tree Solar Farm, designed by REC Solar, has a rated output power of 4.5 MW and began operation in 2018 to provide electricity to Cal Poly’s campus. Gold Tree Solar Farm site terrain consists of rolling hills and uneven slopes. The uneven typography results in interrow shading, requiring a modified tracking control algorithm to maximize power production. Predicting a utility solar field’s lifetime energy yield is a critical step in assessing project feasibility and calculating project revenue. The MATLAB-based predictive power model developed for this field overpredicted power in the middle of the day. The purpose of this …

Solar Pv Emulator, Tristan Studer, Cody Kremer

Electrical Engineering

The implementation of a solar PV emulator. Creating a controllable testing environment which sufficiently recreates realistic conditions a photovoltaic cell would experience in real world use. The project aims to accurately show the efficiency and reliability of a solar PV cell, opposed to an ideal model which creates unrealistic expectations. The PV emulator implements conditions such as: irradiance, soiling and temperate changes. It gives feedback on a displayed IV curve and/or PV curve so the user may graphically analyze the output their PV cell produces given various conditions. It allows the user selectable conditions the solar cell may experience this …

Dynamic Analysis Of A Microgrid Powered With An Inverter And Machine-Based Distributed Resources, Brandon William Blackstone

UNLV Theses, Dissertations, Professional Papers, and Capstones

The proliferation of renewable distributed energy resources, particularly photovoltaic (PV) power systems, and the increasing need for a reliable power supply has led to the concept of microgrids, a mini-grid that consists of locally connected power generation units and needs, able to operate connected or disconnected from the utility grid, using controlled and coordinated methods to provide for the users of the microgrid the best possible conditions for their needs. The main technical issues facing microgrids include some of the following, seamless transition from stand-alone to utility grid connected operation, how to preserve frequency and voltage stability, and provide the …

Solar Soiling Mitigation, Claire Desmith

Electrical Engineering

This senior project aims to mitigate performance losses that occur in Photovoltaic (PV) systems due to soiling of the panels. Soiling is the natural occurrence of debris accumulation on panels, depending on local climate conditions. Soiling loss refers to efficiency lost due to dirt and dust accumulation on the panels. The debris reduces system output by shading on a smaller scale. In addition to uniform soiling, corner soiling is observed in framed modules as debris collects in the corners of the modules. While solutions currently exist to clean modules to mitigate soiling losses, these solutions are often expensive and time …

The Hybridization Of A Graphene And Silicon Carbide Schottky Optoelectronic Device By The Incorporation Of A Lead Sulfide Quantum Dot Film, Joshua Letton

Theses and Dissertations

The work that follows examines the impact of lead sulfide quantum dots on a native epitaxial graphene (EG) SiC Schottky device, resulting in a hybrid optoelectronic device which presents a possible avenue towards a novel hybrid carbide-based Schottky solar cell. The active (n-type SiC) and contact (graphene) layers for the Schottky junction of the device were grown epitaxially using a novel technique incorporating tetrafluorosilane (TFS) as a precursor gas. The bare EG/SiC device was characterized based on its I-V behavior in dark and under illumination for both forward and reverse bias conditions. The initial characterization demonstrated the expected Schottky diode …

Comprehensive Optimization Models For Voltage Regulation In Pv-Rich Multi-Phase Distribution Systems, Ibrahim Alsaleh

USF Tampa Graduate Theses and Dissertations

The distribution systems are increasingly challenged by the continued prevalence of distributed energy resources (DERs), signaling the need for new computational tools to systemize their involvement, coordinate their operation with existing control devices, and mitigate undesired actuation of expensive equipment. Co-optimized operation of the various control devices becomes possible with the advancement in the power system optimization algorithms and the increased deployment of advanced metering infrastructure, offering system awareness and two-way communication. The steady-state alternating-current optimal power flow (ACOPF) problem, being the most descriptive form of OPF, lies at the root of power system optimization, aiming to minimize an operating …

Energy And Economic Losses Due To Soiling On Utility Scale Pv Systems To Guide Timing Of Cost Effective Cleaning, Sophia Mcmillin Stockburger, Vicente Jesus Rios

Electrical Engineering

The purpose of this senior project is to develop and recommend a cleaning schedule for Goldtree Solar Farm that is both economically beneficial and an efficient use of cleaning for the client. Solar farms can have various factors that influence the cleaning schedule such as weather behavior, time of the year, soiling, and other factors. Through this senior project, the goal is to assess these factors effect on the solar farm to produce a cleaning schedule that will maximize energy production, maximize profits, and prevent insignificant cleaning

This analysis is motivated by defining and promoting the benefits of regular maintenance …

Neca Ghana Project, Michael T. Klee

Construction Management

Cal Poly’s motto is, “Learn by Doing" and for Cal Poly’s NECA Chapter, this isn’t simply a motto, but a directive for proactive change. For my senior project I will be leading the Cal Poly NECA chapter in the design, pre- fabrication and construction of a 5-7kw solar array, community center, ice production room and technology room in the remote fishing village of Agbokpa, Ghana. The solar array will power multiple industrial DC freezers, high efficiency LED lighting and charging stations while additionally powering water filtration and irrigation systems. Like many other fishing villages around the world, Agbokpa has no …

Triple-Junction Solar Cells : In Parallel., Levi C Mays

Electronic Theses and Dissertations

This paper looks into the current inefficiency of solar cells and attempts a few alternative solar cell structures in order to provide a more effective source of renewable energy. Currently, multi-junction solar cells are being developed to capture the sun’s light more efficiently. One of the ideas in this paper is to add a window to see if the addition of such a layer into a junction will increase the voltage while maintaining nearly the same current output. Central to this paper is the rearranging of the conducting layers of the multi-junction cell so that the junctions can be connected …

Pv Hybrid Inverter And Bess, Jacob Sussex, William Dresser, Owen Mckenzie, Jonathan Wharton, Derek Seaman

Electrical Engineering

The storage of energy from renewable sources such as photovoltaic based systems is a growing market, with 36 MWh of storage installed in Q1 of 2018. A report from EnergySage earlier this year states that in 2017, 74% of residential solar owners were also interested in energy storage systems. Mainstream systems like Tesla’s Powerwall are competing with other lithium-ion based storage systems from a wide number of providers on the market today. Short term and long term data collection on a system like this could be useful in designing future systems which perform better than the current market offerings. This …

Design And Analysis Of A Non-Isolated High Gain Step-Up Cuk Converter, Yasser Almalaq

Electronic Theses and Dissertations

Renewable energy sources, such as solar energy, are desired for both economic and ecological issues. These renewable energy sources are plentiful in nature and have a terrific capability for power generation. The only drawback of solar energy, which is one of the best forms of energy sources, is that the output has a low voltage and needs to be stepped up in order to be inserted into the DC grid or an inverter for AC applications. To overcome this drawback, a high gain DC-DC power converter is required in this kind of system. These power converters are needed for a …

Application Of Silicon Nanohair Textured P-N Junctions In A Photovoltaic Device, Michael Small

Electronic Theses and Dissertations

The goal of this project is to design and develop a fabrication process for a silicon photovoltaic device which incorporates a nanohair textured p-n junction. The silicon nanowires are etched into a silicon wafer, comprising an epitaxial p-layer on n-substrate, via metal-assisted chemical etching (MACE). The resulting nanowires contain p-n junctions that lie along the length of the vertical nanowires. This construct has the potential to increase the optical bandwidth of a silicon photovoltaic device by allowing a greater amount of short wavelength light to reach the junction. In addition, the MACE method of nanofabrication has the potential for decreasing …

Transformerless High-Power Medium-Voltage Multi-Module Pv Converters, Hasan Bayat

Electronic Thesis and Dissertation Repository

This thesis is focused on the modular multilevel converter (MMC) for Photovoltaic (PV) applications. It is an attempt to address the issues associated with the modeling, control, and power mismatch elimination of the MMC-based PV systems. Firstly, a new real power reference generation scheme is proposed that creates a linear relationship between the real power reference of the system and the dc link voltage of the submodules. Further, a new power mismatch elimination strategy is proposed for the MMC-based PV system which ensures balanced currents are delivered to the host grid regardless of leg and arm power mismatches. The thesis …

The Analysis And Study Of Power System Designs For Same Polytechnic College In Tanzania, Kevin Lum Hua

Master's Theses

The Mbesese Initiative for Sustainable Development (MISD) is a group aiming to help eliminate extreme poverty in Africa by creating educational opportunity. One project that the group is currently doing is to build Same Polytechnic College (SPC) in Tanzania. As part of the project, this thesis aims to study and analyze the electrical power system and distribution for the college. Based on the projected load profile of the college and high potential for solar generation in Tanzania, several different power systems utilizing local utility AC electricity and/or photovoltaic (PV) DC electricity are explored and simulated for their feasibility and performance. …

Design, Fabrication, And Characterization Of Novel Optoelectronic Devices For Near-Infrared Detection, Ahmad Nusir

Graduate Theses and Dissertations

Investigating semiconductor materials and devices at the nanoscale has become crucial in order to maintain the exponential development in today’s technology. There is a critical need for making devices lower in power consumption and smaller in size. Nanoscale semiconductor materials provide a powerful platform for optoelectronic device engineers. They own interesting properties which include enhanced photoconductivity and size-tunable interband transitions.

In this research, different types of nanostructures were investigated for optoelectronic devices: nanocrystals, nanowires, and thin-films. First, lead selenide nanocrystals with narrow bandgap were synthesized, size-tailored, and functionalized with molecular ligands for the application of uncooled near-infrared photodetectors. The devices …

Design And Optimization Of Hybrid Energy Storage For Photovoltaicpower Fluctuation Smoothing Based On Frequency Analysis, Yanting Zeng

Theses and Dissertations

As the output power of photovoltaic generation system is affected by factors such as light intensity and temperature, it creates greater randomness and volatility. When the power changes quickly and fluctuates, the traditional energy storage devices often can’t balance the power effectively. In this research Fast Fourier Transform (FFT) method is used to transform the photovoltaic stabilization power in the original time domain to the frequency domain for analysis. And percentage method was used to select the most typical PV data in the frequency domain. Then, the selected power was converted back to the time domain using Inverse Fast Fourier …

Advanced Topologies Of High-Voltage-Gain Dc-Dc Boost Converters For Renewable Energy Applications, Ahmad Alzahrani

Doctoral Dissertations

This dissertation proposes several advanced power electronic converters that are suitable for integrating low-voltage dc input sources, such as photovoltaic (PV) solar panels, to a high voltage dc bus in a 200 - 960 V dc distribution system. The proposed converters operate in the continuous conduction mode (CCM) and offer desirable features such as low-voltage stresses on components, continuous input currents, and the ability to integrate several independent dc input sources. First, a family of scalable interleaved boost converters with voltage multiplier cells (VMC) is introduced. Several possible combinations of Dickson and Cockcroft-Walton VMCs are demonstrated and compared in terms …

Photovoltaic Inverter Control To Sustain High Quality Of Service, Yan Chen

Theses and Dissertations

The increasing penetration of distributed solar photovoltaic (PV) generation presents both challenges and opportunities for distribution systems. The intermittent nature of solar irradiance may lead to power quality degradation. At the same time, PV inverters –if properly designed and operated– can be used to improve power quality. The goal of this dissertation is to develop power flow optimization methods for power distribution networks with high penetration of PV generation. The approaches proposed in this dissertation have been tested using the modified version of the IEEE 34-node distribution system and the IEEE 123-node distribution system, as well as the validated model …

Design & Evaluation Of A Hybrid Switched Capacitor Circuit With Wide-Bandgap Devices For Dc Grid Applications, Joshua L. Stewart

Electrical and Computer Engineering ETDs

ABSTRACT

As technologies advance, the rate at which renewable power sources, such as solar photovoltaic (PV) and wind, are being added to the power grid is increasing. Typically, PV power plants require large inverters for direct current to alternating current (DC-AC) power conversion, as well as large transformers to step up voltages to the grid voltage. Offshore wind farms and large PV power plants in remote locations often aggregate power on a DC bus in order to improve efficiency and reduce the cost of power conversion hardware within the energy complex. However, the power must still be converted to AC …

Modeling And Charging Control Of A Lithium Ion Battery System For Solar Panels, Garrett David Heinen

Master's Theses

The advancement in solar panel and battery technology makes them useful for energy supply and storage. This thesis involves the modeling and charging control of a lithium ion battery system for solar panels. The proposed model is based on the parameters and characteristics of a realistic battery and solar panel system; and the hybrid control approach combines the advantages of the adaptive incremental conductance method and the perturb and observe method to track the maximum power point of the solar panel for charging the battery unit. Computer simulation results demonstrate that this proposed approach offers a faster convergence rate than …

Effective Pv Output Fluctuation Smoothing Based On Frequency Analysis And Different Weather Patterns, Kuei Hsu Kuo

Theses and Dissertations

As the Hybrid Energy Storage System (HESS) has the advantages of both power-based and energy-based energy storage devices. It is suitable for a microgrid to smooth the power fluctuation. Analyze the power data of a grid-connected photovoltaic (PV) power station. This research considers grid-connected PV requirements to join the HESS and take advantage of the HESS charge and discharge characteristics to reduce the problems caused by light intensity and temperature change of grid-connected PV power output fluctuations. Using battery optimization control strategies to reduce power and capacity of the HESS configuration. This paper Analyze the effect evaluation when HESS rated …

Configuration And Electronic Properties Of The Interface Between Lead Iodide Hybrid Perovskite And Self-Assembled Monolayers In Solar Cells, Parin Divya Amlani

Browse all Theses and Dissertations

Hybrid perovskite photovoltaic materials are currently the most promising functional materials for solar cell applications with efficiency reaching to those of more conventional materials such as silicon. Using self-assembled monolayers between photovoltaic materials and electrodes is a method for improving the stability and functionality. Recent experiments have shown that using 4-mercaptobenzoic acid and pentafluorobenzenethiol monolayers bridging lead iodide hybrid perovskite photovoltaic materials and electrodes result in improved stability and efficiency. The details of monolayer assembly, molecular adsorption configuration, and resulting modification of electronic properties are important characteristics related to solar cell performance. These characteristics can be obtained through accurate computer …

Structure Stability And Optical Response Of Lead Halide Hybrid Perovskite Photovoltaic Materials: A First-Principles Simulation Study, Siddharth Narendrakumar Rathod

Browse all Theses and Dissertations

A third-generation of solar cell is based on organic-inorganic hybrid perovskite materials. These have reached up to 22.1% conversion efficiency through exponential growth just within the last decade, compared to much longer improvement times for other photovoltaic technologies. Lead halide perovskites are among the most commonly used materials in this context. Despite the relatively large number of available works on some of these materials, in particular CH3NH3PbI3, others are less investigated. Here, we focused on CH3NH3PbCl3, CH3NH3PbBr3 and CH3NH3PbI3 for assessing structure stability and optical response. Using quantum-mechanics-based first principles approaches, we calculated the optimized structures of these three materials …

Photovoltaic Cooking In The Developing World, Tyler Watkins, Christopher O'Day, Omar Arriaga

Mechanical Engineering

The challenge of clean cooking is faced by hundreds of millions of people worldwide. We present a cooking technology consisting of a solar panel directly connected to an electric heater in a well-insulated chamber. Assuming continued decrease in solar panel prices, we anticipate that in a few decades Solar Electric Cooking technologies will be the most common cooking technology for the poor. Appropriate use of insulation reduces the power demand making low-power Insulated Solar Electric Cooking systems already cost competitive.

Simulation, Measurement, And Emulation Of Photovoltaic Modules Using High Frequency And High Power Density Power Electronic Circuits, Yunas Erkaya

Electrical & Computer Engineering Theses & Dissertations

The number of solar photovoltaic (PV) installations is growing exponentially, and to improve the energy yield and the efficiency of PV systems, it is necessary to have correct methods for simulation, measurement, and emulation. PV systems can be simulated using PV models for different configurations and technologies of PV modules. Additionally, different environmental conditions of solar irradiance, temperature, and partial shading can be incorporated in the model to accurately simulate PV systems for any given condition.

The electrical measurement of PV systems both prior to and after making electrical connections is important for attaining high efficiency and reliability. Measuring PV …