Engineering Commons^™

Nanoplasmonic Sensors Based On Periodic Arrays Of Gold Nanoparticles, Hao Jiang

Electronic Thesis and Dissertation Repository

Nanoplasmonic sensors use the localized surface plasmon resonance (LSPR) of metal nanostructures to sense the refractive index change in a surface-bound layer caused by biomolecular interactions or changing chemical environment. In this thesis, four types of sensor configurations based on gold nanoparticle arrays are thoroughly investigated.

The first configuration is a periodic array of gold nanoparticles excited by the evanescent field of an optical waveguide mode. Since light carried by a waveguide mode propagates along the same plane of the periodicities, the coupling of nanoparticles are strongly affected by the photonic crystal lattice. This configuration is investigated both in simulations …

Fault Location And Incipient Fault Detection In Distribution Cables, Zhihan Xu

Electronic Thesis and Dissertation Repository

A set of fault location algorithms for underground medium voltage cables, two incipient fault detection schemes for distribution cables and a state estimation method for underground distribution networks are developed in this thesis.

Two schemes are designed to detect and classify incipient faults in underground distribution cables. Based on the methodology of wavelet analysis, one scheme is to detect the fault-induced transients, and therefore identify the incipient faults. Based on the analysis of the superimposed fault current and negative sequence current in time domain, the other scheme is particularly suitable to detect the single-line-to-ground incipient faults, which are mostly occurring …

High Speed And Low-Complexity Hardware Architectures For Elliptic Curve-Based Crypto-Processors, Reza Azarderakhsh

Electronic Thesis and Dissertation Repository

The elliptic curve cryptography (ECC) has been identified as an efficient scheme for public-key cryptography. This thesis studies efficient implementation of ECC crypto-processors on hardware platforms in a bottom-up approach. We first study efficient and low-complexity architectures for finite field multiplications over Gaussian normal basis (GNB). We propose three new low-complexity digit-level architectures for finite field multiplication. Architectures are modified in order to make them more suitable for hardware implementations specially focusing on reducing the area usage. Then, for the first time, we propose a hybrid digit-level multiplier architecture which performs two multiplications together (double-multiplication) with the same number of …

Three-Dimensional Modeling Of Electrostatic Precipitator Using Hybrid Finite Element - Flux Corrected Transport Technique, Niloofar Farnoosh

Electronic Thesis and Dissertation Repository

This thesis presents the results of a three-dimensional simulation of the entire precipitation process inside a single-electrode one-stage electrostatic precipitator (ESP). The model was designed to predict the motion of ions, gas and solid particles. The precipitator consists of two parallel grounded collecting plates with a corona electrode mounted at the center, parallel to the plates and excited with a high dc voltage. The complex mutual interaction between the three coexisting phenomena of electrostatic field, fluid dynamics and the particulate transport, which affect the ESP process, were taken into account in all the simulations. The electrostatic field and ionic space …

Time-Domain Macromodeling Of High Speed Distributed Networks, Amir Beygi

Electronic Thesis and Dissertation Repository

With the rapid growth in density, operating speeds and complexity of modern very-large-scale integration (VLSI) circuits, there is a growing demand on efficient and accurate modeling and simulation of high speed interconnects and packages in order to ensure the signal integrity, reliability and performance of electronic systems. Such models can be derived from the knowledge of the physical characteristics of the structure or based on the measured port-to-port response.In the first part of this thesis, a passive macromodeling technique based on Method of Characteristics (referred as Passive Method of Characteristics or PMoC) is described which is applicable for modeling of …

Advanced Islanded-Mode Control Of Microgrids, Mohammad Bagher Delghavi

Electronic Thesis and Dissertation Repository

This thesis is focused on modeling, control, stability, and power management of electronically-interfaced distributed energy resource (DER) units for microgrids. Voltage amplitude and frequency regulation in an islanded microgrid is one of the main control requirements. To that end, first a mathematical model is developed for an islanded DER system and then, based on the developed model, amplitude and frequency control schemes are proposed for (i) balanced and linear loads and (ii) unbalanced and nonlinear loads. The proposed control strategy for unbalanced and nonlinear loads, utilizes repetitive control scheme to reject the effects of unbalanced and/or distorted load currents. Moreover, …

Addressing Computational Complexity Of High Speed Distributed Circuits Using Model Order Reduction, Ehsan Rasekh

Electronic Thesis and Dissertation Repository

Advanced in the fabrication technology of integrated circuits (ICs) over the last couple of years has resulted in an unparalleled expansion of the functionality of microelectronic systems. Today’s ICs feature complex deep-submicron mixed-signal designs and have found numerous applications in industry due to their lower manufacturing costs and higher performance levels. The tendency towards smaller feature sizes and increasing clock rates is placing higher demands on signal integrity design by highlighting previously negligible interconnect effects such as distortion, reflection, ringing, delay, and crosstalk. These effects if not predicted in the early stages of the design cycle can severely degrade circuit …

Attitude Estimation And Control Of Vtol Uavs, Andrew D. Roberts

Electronic Thesis and Dissertation Repository

The theoretical challenge involved in the operation of VTOL UAVs is often divided into two main problems. The first problem involves the development of an estimation scheme which can accurately recover the orientation, or angular position, of the aircraft. The second problem involves the development of algorithms which can be used to reliably control the orientation and/or the position of the vehicle. These two problems are the primary focus of this thesis.

We first consider the problem of attitude estimation. To solve this problem we use vector measurements, and in many cases, a gyroscope (to measure the angular velocity of …

Investigating Performance And Reliability Of Process Bus Networks For Digital Protective Relaying, Mitalkumar Kanabar

Electronic Thesis and Dissertation Repository

To reduce the cost of complex and long copper wiring, as well as to achieve flexibility in signal communications, IEC 61850 part 9-2 proposes a process bus communication network between process level switchyard equipments, and bay level protection and control (P&C) Intelligent Electronic Devices (IEDs). After successful implementation of Ethernet networks for IEC 61850 standard part 8-1 (station bus) at several substations worldwide, major manufacturers are currently working on the development of interoperable products for the IEC 61850-9-2 based process bus. The major technical challenges for applying Ethernet networks at process level include: 1) the performance of time critical messages …

Semantic Privacy Policies For Service Description And Discovery In Service-Oriented Architecture, Diego Zuquim Guimaraes Garcia

Electronic Thesis and Dissertation Repository

Privacy can be defined as the right of an individual to have information about them accessed and used in conformity with what they consider acceptable. Privacy preservation in Service-Oriented Architecture (SOA) is an open problem. A solution for this problem must include features that support privacy preservation in each area of SOA. This thesis focuses on the areas of service description and discovery. The problems in these areas are that currently it is not possible to describe how a service provider deals with information received from a service consumer as well as discover a service that satisfies the privacy preferences …

Fem-Fct Based Dynamic Simulation Of Trichel Pulse Corona Discharge In Point-Plane Configuration, Paria Sattari

Electronic Thesis and Dissertation Repository

In this thesis, a new two-dimensional numerical solver is presented for the dynamic simulation of the Trichel pulse regime of negative corona discharge in point-plane configuration. The goal of this thesis is to simulate the corona discharge phenomenon and to improve the existing models so that the results have an acceptable compatibility with the experimentally obtained data. The numerical technique used in this thesis is a combination of Finite Element Method (FEM) and Flux Corrected Transport (FCT). These techniques are proved to be the best techniques, presented so far for solving the nonlinear hyperbolic equations that simulate corona discharge phenomenon. …

Optical Power Splitting Techniques Using Photonic Crystal Line Defect Waveguides, Rajat Dey

Electronic Thesis and Dissertation Repository

“Photonic Crystals (PCs)” are dielectric or metallo-dielectric structures with periodic spatial alternations of refractive index on the scale of the wavelength of light. Many optical devices, based on PCs, have been proposed. There are multiple ways by which equal amount of power of incoming signals can be divided into two, three and four output channels; for example using multiple coupled photonic crystal waveguides, directional coupling and cascaded multimode PC waveguides. Ideally, the splitter should divide the input power equally into the output channels without significant reflection or radiation losses and should be compact in size. In this thesis we have …

Planar Photonic Crystal For Biosensor Applications, Anil Kumar Mudraboyina

Electronic Thesis and Dissertation Repository

Photonic crystals are the subject of intense study due to their capability to provide precise control of optical transmission characteristics through the choice of their periodic lattice parameters and the material with which they are fabricated. The sensitivity of photonic crystal band structure and defect transmission states to refractive index changes either at planar boundaries of a 2-D crystal or at individual lattice sites, make these structures potentially attractive for integrated point detection biosensor devices.

1-D Photonic crystal (PC) and 2-D PC based sensors were developed and studied in terms of sensitivity with different types materials functionalized on the surface. …

Reliable And High-Performance Hardware Architectures For The Advanced Encryption Standard/Galois Counter Mode, Mehran Mozaffari-Kermani

Electronic Thesis and Dissertation Repository

The high level of security and the fast hardware and software implementations of the Advanced Encryption Standard (AES) have made it the first choice for many critical applications. Since its acceptance as the adopted symmetric-key algorithm, the AES has been utilized in various security-constrained applications, many of which are power and resource constrained and require reliable and efficient hardware implementations.

In this thesis, first, we investigate the AES algorithm from the concurrent fault detection point of view. We note that in addition to the efficiency requirements of the AES, it must be reliable against transient and permanent internal faults or …

Measurement Of Dynamic Temperatures And Pressures In Nuclear Power Plants, Hashem M. Hashemian

Electronic Thesis and Dissertation Repository

The dynamic response of the process sensors that supply real-time data to the safety systems in nuclear power plants (NPP) play a vital role in preventing plant accidents. If a critical process temperature, pressure, level, or flow experiences a step change, for example, the sensors that measure the process variable must act quickly to actuate the safety systems that will mitigate the consequence of an undesirable process excursion. The research conducted for this dissertation has been performed to ensure the prompt response of critical sensors by advancing, refining, validating, and implementing new methods for measuring the response time of temperature, …

Modeling Lung Tissue Motions And Deformations: Applications In Tumor Ablative Procedures, Ali Sadeghi Naini

Electronic Thesis and Dissertation Repository

Various types of motion and deformation that the lung undergoes during minimally invasive tumor ablative procedures have been investigated and modeled in this dissertation. The lung frequently undergoes continuous large respiratory deformation, which can greatly affect the pre-planned outcome of the operation, hence deformation compensation becomes necessary. The first type of major deformation involved in a target lung throughout a tumor ablative procedure is the one encountered in procedures where the lung is totally deflated before starting the operation. A consequence of this deflation is that pre-operative images (acquired while the lung was partially inflated) become inaccurate for targeting the …

Image-Guided Robot-Assisted Techniques With Applications In Minimally Invasive Therapy And Cell Biology, Mahdi Azizian

Electronic Thesis and Dissertation Repository

There are several situations where tasks can be performed better robotically rather than manually. Among these are situations (a) where high accuracy and robustness are required, (b) where difficult or hazardous working conditions exist, and (c) where very large or very small motions or forces are involved. Recent advances in technology have resulted in smaller size robots with higher accuracy and reliability. As a result, robotics is fi nding more and more applications in Biomedical Engineering. Medical Robotics and Cell Micro-Manipulation are two of these applications involving interaction with delicate living organs at very di fferent scales.
Availability of a …

Impact Of Geomagnetically Induced Currents On Power Transformers, Jonathan E. Berge

Electronic Thesis and Dissertation Repository

This thesis deals with the impact of Geomagnetically Induced Current (GIC) on power transformers in electrical power systems. A simulator to calculate the flows of GIC in an electrical power network, based on an assumed or measured induced geoelectric potential is proposed. This simulator includes all needed mapping techniques to handle a system that cover a large geographical area.

A correlation between GIC and the reactive power absorbed in the core of the saturated transformer is proposed. That correlation is used to estimate GIC in a transformer utilizing existing reactive power measuring infrastructure within the electrical grid without the need …

Control And Power Supply For Resistance Spot Welding (Rsw), Meranda Salem

Electronic Thesis and Dissertation Repository

In the automobile industry, Resistance Spot Welding (RSW) is widely used for its low cost, high speed, simple mechanism and applicability for automation. RSW has become the predominant means of auto body assembly, resulting in two to six thousands spot welds performed on each manufactured car. In the North American automobile industry there are approximately 100 billion spot welds, which are done every year.

RSW is the joining of two or more metal parts together in a localized area by resistive heating and pressure. Small Scale RSW (SSRSW) is commonly used for medical devices and electronic components, because the welded …

Advances In Internal Model Principle Control Theory, Jin Lu

Electronic Thesis and Dissertation Repository

In this thesis, two advanced implementations of the internal model principle (IMP) are presented. The first is the identification of exponentially damped sinusoidal (EDS) signals with unknown parameters which are widely used to model audio signals. This application is developed in discrete time as a signal processing problem. An IMP based adaptive algorithm is developed for estimating two EDS parameters, the damping factor and frequency. The stability and convergence of this adaptive algorithm is analyzed based on a discrete time two time scale averaging theory. Simulation results demonstrate the identification performance of the proposed algorithm and verify its stability.

The …

A Usability Maturity Model For Open Source Software, Arif Raza

Electronic Thesis and Dissertation Repository

User satisfaction has always been a major factor in the success of software, regardless of whether the software is closed proprietary or open source software (OSS). Although user-centered designs are gaining recognition among the OSS community, many design scenarios still do not incorporate usability as one of their primary goals. Accordingly, many individuals believe that if OSS was more usable, its popularity would increase tremendously. Although there are strong examples of usable open source software, there is still potential to improve the usability of OSS. The usability assessment of open source projects is an area where relatively little research has …