Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Electrical and Computer Engineering

2001

Chinese Chemical Society | Xiamen University

Articles 1 - 22 of 22

Full-Text Articles in Engineering

Research Progress On Proton Exchange Membranes Of Fuel Cells, Jing-Rong Yu, Dan-Min Xing, Fu-Qiang Liu, Jian-Guo Liu, Bao-Lian Yi Nov 2001

Research Progress On Proton Exchange Membranes Of Fuel Cells, Jing-Rong Yu, Dan-Min Xing, Fu-Qiang Liu, Jian-Guo Liu, Bao-Lian Yi

Journal of Electrochemistry

The proton exchange membrane fuel cells(PEMFC) use proton exchange membranes(PEM) as their electrolytes. The performance of the PEMFC is strongly dependent on the characteristics of the PEM. In this paper, the requirements of the PEM utilized in the PEMFC were analyzed. The per_fluorinated, partially fluorinated and non_fluorinated PEM were introduced respectively. The structures, preparation, properties of the various types of PEM and their applications in the PEMFC were also discussed in detail.

Go to article

An Investigation Of Structural Properties Of Li-Al-Mixed Doped Spinels Materials Li_(1+X) Al_Ymn_(2-Y)O_4, Zi-Shan Zheng, Zi-Long Tang, Zhong-Tai Zhang, Wan-Ci Sheng Nov 2001

An Investigation Of Structural Properties Of Li-Al-Mixed Doped Spinels Materials Li_(1+X) Al_Ymn_(2-Y)O_4, Zi-Shan Zheng, Zi-Long Tang, Zhong-Tai Zhang, Wan-Ci Sheng

Journal of Electrochemistry

Al and Li elements were co_doped into host spinel lithium manganese oxide by a simple and economical preparation technology . There was an investigation of the influence of doped Al contents on the initial capacity and cycling performance of the materials. The investigation of the XRD patterns, the analysis of the SEM micrographs and the determination of IR spectroscopy showed that the particles of dopant materials are fine, narrowly distributed and well crystallized, and the bonds Mn_O are stronger than these of undoped materials. The resulted materials have a high initial capacity of 119 mAh/g and good cycling characterization. The …

Go to article

The Influence Of Synthesis Conditions On The Electrochemical Properties Of Spinel Limn_2o_4, Jun Feng Xu, Zhi Yu Jiang Nov 2001

The Influence Of Synthesis Conditions On The Electrochemical Properties Of Spinel Limn_2o_4, Jun Feng Xu, Zhi Yu Jiang

Journal of Electrochemistry

The electrochemical properties of spine LiMn 2O 4 synthesized via a solid state reaction were investigated. Electrolysis MnO 2(EMD), Li 2CO 3,LiOH and LiNO 3 were used as the initial materials. It was found that the electrochemical properties of LiMn 2O 4 were strongly influenced by the synthesis conditions. The LiMn 2O 4 samples prepared via the reaction of EMD and LiNO 3 showed the best properties for a lithium ion intercalation reaction. The procedure includes two steps: pretreatment at 280 ℃ for 6 hours to initiate the permeation of melting LiNO 3 into the micropores of EMD particles, followed …

Go to article

Adsorption And Oxidation Of Methanol On Pt And Sb, S Modified Pt Electrodes Using Cyclic Voltammetry And Eqcm, Guo-Liang Chen, Sheng-Pei Chen, Heng Lin, Xing-Hong Zheng, Shi-Gang Sun Nov 2001

Adsorption And Oxidation Of Methanol On Pt And Sb, S Modified Pt Electrodes Using Cyclic Voltammetry And Eqcm, Guo-Liang Chen, Sheng-Pei Chen, Heng Lin, Xing-Hong Zheng, Shi-Gang Sun

Journal of Electrochemistry

The processes of adsorption and oxidation of methanol on Pt, Pt/Sb ad and Pt/S ad electrodes were studied by using cyclic voltammetry and electrochemical quartz crystal microba_lance (EQCM). The results demonstrated that the oxidation of methanol depends strongly on oxidation states of electrode surface. Sb adatoms on Pt surface can adsorb oxygen at relatively low potentials, and exhibit catalytic effects for methanol oxidation. In contrast to Pt electrodes, the oxidation peak potential of methanol in this case negatively shifted to about 130 mV. In a contrary, the oxidation of S adatoms consumes oxygen species of Pt electrode surface. As a …

Go to article

Electrosynthesis Of A New Electroactive Poly(2,2'-Diaminophenyloxydisulfide), Yu Zhi Su, Yan Wen Rao, Ye Yang, Mei-Bing Chen, Yin Ling Qiu, Yong-Hua Zhang, Ke Cheng Gong Nov 2001

Electrosynthesis Of A New Electroactive Poly(2,2'-Diaminophenyloxydisulfide), Yu Zhi Su, Yan Wen Rao, Ye Yang, Mei-Bing Chen, Yin Ling Qiu, Yong-Hua Zhang, Ke Cheng Gong

Journal of Electrochemistry

A new electroactive poly(2,2' diaminophenyloxydisulfide) (PDAPD) was successfully synthesized from acetonitrile(AN)/tetrahydrofuran(THF)solutions containing the supporting electrolyte(LiClO 4)and the various kinds of acids(HCl,CF 3COOH,CCl 3COOH) on Pt electrode by consecutive cyclic voltammiry. The effects of the concentrations of supporting electrolyte(LiClO 4) and acid(HCl,CF 3COOH,CCl 3COOH) on electrodepositon of PDAPD film were investigated. The best experimental conditions for electrosynthesis of a highly electroactive conducting polymer film are that the concentrations are 0.1 mol/L and between 0.05 mol/L～0.5 mol/L,respectively for LiClO 4 and HCl.

Go to article

The Research Of Organic Electrolyte Solutions For Li-Ion Batteries, Quang Chao Zhuang, Shan Wu, Wen Yuan Liu, Zhao-Da Lu Nov 2001

The Research Of Organic Electrolyte Solutions For Li-Ion Batteries, Quang Chao Zhuang, Shan Wu, Wen Yuan Liu, Zhao-Da Lu

Journal of Electrochemistry

The characteristics of organic electrolyte solutions and its influences on the ion conductivity are summarized. The chemistry and electrochemistry of organic electrolyte solutions and characteristics of ordinary organic solvents are introduced. Progresses in studies of organic electrolyte solutions such as electrolyte salts, organic solvents, additives in recent years are reviewed, current situation of the studies of organic electrolyte solutions were also discussed.

Go to article

The Investigation Of Prepare Condition For Micropores Membranes From Poly(Vinylidene Fluoride), Xu-Mei Ren, Feng Wu, Ying Bai, Hang-Jun Li, Xue Jie Huang Nov 2001

The Investigation Of Prepare Condition For Micropores Membranes From Poly(Vinylidene Fluoride), Xu-Mei Ren, Feng Wu, Ying Bai, Hang-Jun Li, Xue Jie Huang

Journal of Electrochemistry

The micropores membranes from Poly (vinylidene fluoride) were prepared by the phase inversion process. The effects of the casting solution composition, exposure time prior to coagulation and temperature of the coagulation bath on properties of prepared membranes were investigated. For all prepared membranes an asymmetric structure, sometimes without a dense skin layer, was observed.

Go to article

Studies On The Properties Of The Anodic Films Formed On Lead- Lanthanum And Lead-Samarium Alloys In Sulfuric Acid Solution, Hou Tian Liu, Chun Xuao Yang, Hai Heng Liang, Jiong Yang, Wei-Fang Zhou Nov 2001

Studies On The Properties Of The Anodic Films Formed On Lead- Lanthanum And Lead-Samarium Alloys In Sulfuric Acid Solution, Hou Tian Liu, Chun Xuao Yang, Hai Heng Liang, Jiong Yang, Wei-Fang Zhou

Journal of Electrochemistry

AC voltammetry,linear sweep voltammetry,and cyclic voltammetry were applied to study the anodic corrosion of Pb,Pb 1.0at%La and Pb 1.0at%Sm electrodes in 4.5 mol·dm -3 H 2SO 4 solution (25 ℃).The experiment results show that samarium can inhibit the anodic corrosion of lead and decrease the impedance of anodic Pb(Ⅱ) film. Lanthanum can also decrease the impedance of the anodic Pb(Ⅱ)film, but the effect is smaller.

Go to article

Current Oscillations In The System Of Carbon Steel/Phosphoric Acid/Platinum, Shao-Yuan Shi, Jin-Ping Wu, Jing Liu, An Lin Aug 2001

Current Oscillations In The System Of Carbon Steel/Phosphoric Acid/Platinum, Shao-Yuan Shi, Jin-Ping Wu, Jing Liu, An Lin

Journal of Electrochemistry

The periodic,aperiodic,chaotic and mixed_mode oscillations can occur in the process of the anodic electrodissolution of carbon steel in the solution of dilute phosphoric acid. More plentiful dynamic behaviors can be found in this system compared with the system of Fe/H 3PO 4/Pt.

Go to article

Characterization And Electrochemical Investigation Of Boron-Doped Mesocarbon Microbeads Anode Materials For Lithium-Ion Battery, Mao-Hui Chen, Guo-Tao Wu, Guang-Ming Zhu, Jin-Kua You, Zu-Geng Lin Aug 2001

Characterization And Electrochemical Investigation Of Boron-Doped Mesocarbon Microbeads Anode Materials For Lithium-Ion Battery, Mao-Hui Chen, Guo-Tao Wu, Guang-Ming Zhu, Jin-Kua You, Zu-Geng Lin

Journal of Electrochemistry

The anodic performances of boron doped and undoped mesocarbon microbeads(MCMBs) were comparatively studied and the structures were characterized by XPS,SEM,XRD and electrochemical measurements. It was found that boron doping samples greatly increased the degree of graphitization and the crystallite size,leading to quite different morphology. Electrochemical discharge/charge cycle tests indicate that lithium intercalation occurred at a little higher potential for the boron doped MCMBs, being attended by greater irreversible capacity loss.

Go to article

The Effect Of Preparation Condition On The Photoelectrochemical Performance Of Both The Pani Film And Tio_2-Pani Composite Film On Au, Huai-Guo Huang, Hong-Ping Zhang, Zhi-Xin Zheng, Yan-Yan Xi, Ling-Ling Wu, Zhong-Hua Lin May 2001

The Effect Of Preparation Condition On The Photoelectrochemical Performance Of Both The Pani Film And Tio_2-Pani Composite Film On Au, Huai-Guo Huang, Hong-Ping Zhang, Zhi-Xin Zheng, Yan-Yan Xi, Ling-Ling Wu, Zhong-Hua Lin

Journal of Electrochemistry

Both the PANI(polyaniline) film and TiO 2_PANI composite film on the PATP(p_aminothiophenol)/Au substrate were obtained under different preparation condition by electrochemical methods, and their photoelectrochemical performances were also studied.The results showed that the photoelectrochemical performances of the films depend deeply on the comditions of preparation.The self_assembling of PATP favors the adhesion of PANI.The partially_oxidized PANI has a greater photoelectrochemical response than that of the reduced PANI and oxidized PANI.There is an optimum of film thickness for the photoelectrochemical performance of PANI film.Heat treating is in favor of the photoelectrochemical performance of TiO 2,but decreases the photocurrent response of PANI film.There …

Go to article

New Progress In Studies Of Lithium Nickel Oxide As Positive Electrode Materials Of Lithium Ion Batteris, Han-San Liu, Yong Yang, Zhong-Ru Zhang, Zu-Geng Lin May 2001

New Progress In Studies Of Lithium Nickel Oxide As Positive Electrode Materials Of Lithium Ion Batteris, Han-San Liu, Yong Yang, Zhong-Ru Zhang, Zu-Geng Lin

Journal of Electrochemistry

Lithium nickel oxide as the positive electrode of lithium ion batteries has aroused more and more interests.This paper reviews the recent reserches on synthesis and element_substitution of LiNiO 2 cathode material,and summarizes the intrinsical relationship between properties and sturcture of the material.The developments of new synthesis methods and mutil_substitution of the material are expecting to be studied in the future research.

Go to article

Electrochemistry Characteristic Of Carbon Steel Under Biofilm And Sulfide Film, Ze-Hua Dong, Xing-Peng Guo, Jia-Shen Zheng, Li-Ming Xu May 2001

Electrochemistry Characteristic Of Carbon Steel Under Biofilm And Sulfide Film, Ze-Hua Dong, Xing-Peng Guo, Jia-Shen Zheng, Li-Ming Xu

Journal of Electrochemistry

Wire Beam Electrode (WBE) made of Q235 carbon steel was applied to study the heterogeneous corrosion beneath biofilm formed by Sulfate Reducing Bacteria (SRB) in culture and sulfide film in solution with 1% NaCl and 300 mg/L S 2- . The potential,galvanic density mapping,as well as polarization curve and Electrochemical Impedance Spectrum (EIS) were measured to predict the localized corrosion under biofilm and sulfide film.As a result,the mapping showed the potential fluctuation on the WBE surface decreased over time due to the conductivity of the biofilm and sulfide film.Therefore,the potential mapping could not be a criterion of localized corrosion under …

Go to article

Performance Of Proton Exchange Membrane Fuel Cell With Co/H_2 Fuel, Hong-Mei Yu, Zhong-Jun Hou, Bao-Lian Yi, Ke-Wan Bi, Jing-Xin Zhang, Zhi-Yin Lin, Ming Han May 2001

Performance Of Proton Exchange Membrane Fuel Cell With Co/H_2 Fuel, Hong-Mei Yu, Zhong-Jun Hou, Bao-Lian Yi, Ke-Wan Bi, Jing-Xin Zhang, Zhi-Yin Lin, Ming Han

Journal of Electrochemistry

Fuel of proton exchange membrane fuel cell(PEMFC) mostly comes from reformate contains CO which will poison the fuel cell electrocatalyst.The effect of CO on the performance of PEMFC was studied in this paper.The results of the experiment show that when CO is fed in PEMFC,the cell voltage will be decreased violently,then it will become steady with some vibration.The poison will become more serious with higher CO content and weaker at higher temperature.The adsorption of CO on the electrocatalyst is reversible. The PtRu electrocatalyst is more suitable for the electrocatalysis of CO/H 2 than Pt electrocatalyst.

Go to article

Performance Of A Direct Methanol Fuel Cell, Zhao-Bin Wei, Jian-Guo Liu, Ya-Guang Jiao, Wei-Jiang Zhou, Wen-Zhen Li, Li-Kang Chen, Qin Xin, Bao-Lian Yi May 2001

Performance Of A Direct Methanol Fuel Cell, Zhao-Bin Wei, Jian-Guo Liu, Ya-Guang Jiao, Wei-Jiang Zhou, Wen-Zhen Li, Li-Kang Chen, Qin Xin, Bao-Lian Yi

Journal of Electrochemistry

A direct methanol fuel cell with 9cm 2 active area consists of Pt_Ru/C anode,Pt/C cathode and Nafion 115 membrane.The effect of operating conditions:methanol solution concentration,oxygen pressure and cell temperature on the cell performances was investigated.The results show that performance of single cell was enhanced by increasing oxygen pressure and cell temperature,and a maximum power density 75 mW/cm 2 was obtained in the range of 250_300 mA/cm 2 current density,0.2 MPa oxygen pressure,1.0 mol/L methanol concentration and 75 ℃ cell temperature.When cell operating at room temperature,a relatively low,but a stable performance of cell was also observed.

Go to article

Study Of The Oxidation Dynamics Of Ti-Zro_2 Metal-Ceramics, Wen-Chao Li, Li-Dong Teng May 2001

Study Of The Oxidation Dynamics Of Ti-Zro_2 Metal-Ceramics, Wen-Chao Li, Li-Dong Teng

Journal of Electrochemistry

The oxidation dynamics of hot pressed Ti ZrO 2 metal_ceramics with the composition of 50 vol.% Ti and 50 vol.% ZrO 2 has been studied. Thermodynamic analysis shows that Ti could react with O 2 but not with N 2 in the oxidizing process of Ti ZrO 2 composites at 0.1 MPa air. The oxidation dynamic behavior of Ti ZrO 2 composites is analogous to that of pure Ti. The activation energy for the oxygen diffusion in Ti ZrO 2 composites is higher than that in Ti solutions, for the presence of ZrO 2 restrains the oxygen diffusion in Ti …

Go to article

Preparation And Properties Of Separator For Lithium-Ion Battery, Xu-Mei Ren, Feng Wu, Chuan Wu, Han-Jun Li, Xue-Jie Huang May 2001

Preparation And Properties Of Separator For Lithium-Ion Battery, Xu-Mei Ren, Feng Wu, Chuan Wu, Han-Jun Li, Xue-Jie Huang

Journal of Electrochemistry

Lithium_ion batteries are well adapted to the new multimedia applications. PP/PE based microporous film is commonly used as separator in commercial lithium ion batteries. Here we report a microporous film which is superior to the commercial available separator. The microporous PVDF polymer separators were prepared by the phase inversion process. The pore size of the separator is  7 μm, and it's porosity is 75%. The membrane in LiPF 6 EC/DEC showed high ionic conductivity (above 10 -3 S/cm at room temperature), and good mechanical properties (10 3 kg/cm 2). The half_cells consisted of Li/PVDF separator/MCMB showed excellent cycling characteristics …

Go to article

Synthesis Of Limn_2o_(4-Δ) Cl_Δ Cathode Material By Like-Sol-Gel Methode, Zhao Yong Chen, Yi He, Xing Quan Liu, Zhi-Jie Li, Zuo-Long Yu Feb 2001

Synthesis Of Limn_2o_(4-Δ) Cl_Δ Cathode Material By Like-Sol-Gel Methode, Zhao Yong Chen, Yi He, Xing Quan Liu, Zhi-Jie Li, Zuo-Long Yu

Journal of Electrochemistry

LiMn 2O 4 δ Cl δ was synthesized by like sol gel methode, with calculated LiOH.H 2O, Mn(No 3) 2.6H 2O and LiCl.H 2O, and made electrochemical test with these compounds as positive materials. Result demostrated that LiMn 2O 4 δ Cl δ cathode material has exellent stability and nearly no capacity loss after reaching stability.

Go to article

How Can Direct Mthanol Fuel Cell Benefit From Carbonate Media, Lin Zhuang, Yang Wang, Jun Tao Lu Feb 2001

How Can Direct Mthanol Fuel Cell Benefit From Carbonate Media, Lin Zhuang, Yang Wang, Jun Tao Lu

Journal of Electrochemistry

The kinetics of methanol oxidation and oxygen reduction in 0.5 mol/L K 2CO 3 were compared with those in 0.5 mol/L H 2SO 4. Experiments revealed that carbonate media could be more beneficial to direct methanol fuel cell(DMFC).Firstly, both electrode reactions show better performance in the carbonate than in the acid; secondly, materials other than noble metals become possible to be used as the anodic and cathodic catalysts;thirdly, the potential dectease caused by methanol crossover could be depressed by using metal oxide catalysts not stable in acid, such as MnO 2.

Go to article

A Study On The Performance Of Matrix Prepared By Tape Cast And Its Molten Carbonate Fuel Cells (Mcfcs), Hua-Xin Lin, Bao Lian Yi, Li Zhou, Chang-Qing He, Lian Ying Kong, En Jun Zhang Feb 2001

A Study On The Performance Of Matrix Prepared By Tape Cast And Its Molten Carbonate Fuel Cells (Mcfcs), Hua-Xin Lin, Bao Lian Yi, Li Zhou, Chang-Qing He, Lian Ying Kong, En Jun Zhang

Journal of Electrochemistry

The matrix prepared with γ LiAlO 2 powder and by tape cast displayed higher ability of preventing from gas cross over and lower ohmic polarization. The voltages of the stack (three cells,122 cm 2) stacked with the matrix were 2.02 and 1.78 V at 200 and 246 mA/cm 2, respectively, and the output power reached 53.4 W. The cell(28 cm 2) voltages were 0.85 and 0.75 V at 200 and 300 mA/cm 2, respectively,and the output power was about 6.6 W. Compensating the shrinkage of matrix in stacking cells promoted the enhancement of the MCFC performance.

Go to article

Adsorption And Oxidation Of Ethanol On Nm-Pt/Gc Electrode Ii. Eqcm And In-Situ Ftir Spectroscopic Studies In Acid Media, Guo Liang Chen Feb 2001

Adsorption And Oxidation Of Ethanol On Nm-Pt/Gc Electrode Ii. Eqcm And In-Situ Ftir Spectroscopic Studies In Acid Media, Guo Liang Chen

Journal of Electrochemistry

The adsorption and oxidation of ethanol on nm?Pt/GC electrode in acid solutions containing 0.1 mol·L -1 H 2SO 4 +0.1 mol·L -1 CH 3CH 2OH was investigated by using cyclic voltammetry , EQCM and in?situ FTIR spectroscopy. The experimental results demonstrated that the oxidation of CH 3CH 2OH is closely relaed to solution acidity and oxygen species on electrode surface; CH 3CH 2OH was oxidized on nm?Pt/GC electrode in acidic media via a dual path reaction mechanism, i.e . CH 3CH 2OH may be oxidized into CO 2 through the dissociative adsorbate (CO) and the reactive intermediates that were determined …

Go to article

The Photoelectrochemistry Of Tio_2-Polyaniline Composite Film, Huai Guo Huang, Zhi Xin Zheng, Jin Luo, Hong-Ping Zhang, Ling-Ling Wu, Zhong-Hua Lin Feb 2001

The Photoelectrochemistry Of Tio_2-Polyaniline Composite Film, Huai Guo Huang, Zhi Xin Zheng, Jin Luo, Hong-Ping Zhang, Ling-Ling Wu, Zhong-Hua Lin

Journal of Electrochemistry

A TiO 2 and polyaniline (PANI) composite film was obtained by electrochemical methods. The SEM image of the composite film showed that the PANI film is almost completely covered with TiO 2. The spectra of photocurrent for the TiO 2 PANI composite film , which overlaps the TiO 2 film and PANI film, showed that the composite film is able to have higher conversion efficiency. The spectra of photocurrent for the TiO 2 PANI composite film were different from these of TiO 2 film photosensitized by PANI. The bandgap energy of TiO 2 film on partially oxidized PANI film was …

Go to article