Engineering Commons^™

Quantum-Powered Battery Scheduling In Modern Distribution Grids, Diba Ehsani

Electronic Theses and Dissertations

The rising need for exploiting a novel and evolved computation is an increasing concern in the power distribution system to address the exponential growth of distribution-connected devices. Scheduling numerous battery energy storage systems in an optimal way is one of the emerging challenges that will be more noticeable as the number of batteries, including residential, community, and vehicle batteries, increases in the grid. This thesis focuses on this topic and offers a necessary component in building the quantum-compatible distribution system of the future. Using a constrained quadratic model (CQM) on D-Wave’s hybrid solver as well as a binary quadratic model …

Battery Hardware Simulator, Kian N. Orang, Marcelo Garcia

Electrical Engineering

This project aims to develop a battery hardware simulator, which will serve as a tool for studying microgrids. The primary objective is to create a simulation system that can emulate various battery technologies that are used in microgrids, including lithium-ion and lead acid. By utilizing this battery simulator, Cal Poly students can safely test battery management systems and battery-sensitive electronics without the inherent risks associated with real batteries. Our project implemented this design with a 4-quadrant programmable power supply (ITECH) connected to an AP Systems grid tied inverter. The power supply acts as the battery which can receive or supply …

Optimizing Battery Performance: Investigating The Long-Term Impacts Of Bidirectional Battery Management Systems On Battery Cells, Drue Nathaniel Haskins

Graduate Research Theses & Dissertations

With the increased use of batteries in everyday life, it is crucial to have a robust and reliable battery system that can continue to power our devices. This paper will investigate the reliability, impact on the batteries, and functionality of the bidirectional battery management system (BMS). The design uses two bidirectional switches for each cell, one in series with the cell and one in parallel with the other bidirectional switch and cell. This will allow the cell to be taken in and out of the circuit for any reason determined by the BMS. Taking the battery in and out of …

Technical And Economic Feasibility Of A Microgrid For A Fire Station In Humboldt County, California., Nishaant Kumar Sinha

Cal Poly Humboldt theses and projects

Microgrids are emerging as a promising solution to unreliable grid energy. Today, California is not only witnessing grid resiliency challenges from natural disasters such as wildfires, earthquakes, floods and heatwaves, but it is also seeking to green the grid and bring more renewables online. For example, Humboldt County, where this project is focused, has recently experienced an earthquake of 6.4M (on December 22nd, 2022), which shut down the regional grid for ~20 hours.

Microgrid adoption enables critical facilities to operate seamlessly. The Humboldt Bay Fire Station (HBFS) No.1 is one such example, where first responders work to protect citizens against …

Low Cost And Reliable Wireless Sensor Networks For Environmental Monitoring, Sonia Naderi

Electronic Theses and Dissertations

This thesis utilizes wireless sensor network systems to learn of changes in wireless network performance and environment, establishing power efficient systems that are low cost and are able to perform large scale monitoring. The proposed system was built at the University of Maine’s Wireless Sensor Networks (WiSe-Net) laboratory in collaboration with University of New Hampshire and University of Vermont researchers. The system was configured to perform soil moisture measurement with provision to include other sensor types at later stages in collaboration with Alabama A & M University. In the research associated with this thesis, a general relay energy assisted scenario …

New Solid Polymer Electrolytes For Lithium, Sodium, And Calcium-Based Batteries, Francielli Silva Genier

Dissertations - ALL

The establishment of sustainable energy sources highly depends on efficient storage devices to guarantee a consistent power supply. The growing demand for lithium-ion batteries (LIBs) for this purpose, combined with concerns about lithium availability, has motivated the search for viable storage alternatives, such as sodium and calcium. While several studies have investigated different lithium-free liquid electrolytes, the transport of these alternative ions in their polymer counterparts remains understudied. The advantages of solid polymer electrolytes include the possibility of higher energy density in solid-state devices and the elimination of safety concerns associated with liquid electrolytes, such as flammability, leakage, and dendrite …

Potential Of Grid-Scale Pv And Storage Facilities To Participate In Capacity Markets, Nicholas Giovannetti

Theses and Dissertations

The recent FERC Order 841 has provided an opportunity for grid-scale PV and battery facilities to participate in the capacity market providing ancillary services. Order 841 combined with steadily decreasing PVand battery costs and increasing demand for renewable energy, gives high potential for a PV and battery facility to be economically viable. In this study, an analysis tool is developed as an auxiliary to the PV + Storage + Control + Grid (PSCG) simulation to estimate the megawatts (MW) of dispatchable capacity that can be reliably offered by a PV and storage facility. Limits are based on grid connection, power …

Model Predictive Control For Grid Scale Pv And Battery, Sahithi Chatradi

Theses and Dissertations

Model Predictive Control (MPC) is a control technique that uses prediction data to optimize costs over a given predictive horizon. There are many papers that use this technique to optimize cost in a substantially loaded microgrid, but these techniques are not feasible for utility-scale PV+Storage facility. In this study, MPC is used to optimize the cost for a utility-scale PV+Storage facility, by adding a factor of a possible curtailment. The thesis also presents the various factors that the MPC has in that utility size grid. These factors include line losses, net yield, and curtailment.

Control Of Series Connected Battery Powered Modules, Joshua K. Wooten

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Batteries are a very common type of power source used for all sorts of applications. However, these batteries do not last forever. The purpose of this thesis is to explain and implement a strategy which allows batteries to have a second life; to be able to be re-charged and re-used for another set period of time once they no longer meet a system’s requirements. The preferable way to do this is to make each cell have the same state of charge (SOC) which will lead to a longer lasting battery pack. These batteries will be hooked up to a battery …

Nitro Group Reduction For Use In Organic, Cathodic Materials, Brock G. Goeden

Honors Thesis

The industrial demand for higher capacity, light-weight battery materials has skyrocketed in recent years due to heavy investments in portable electronics, electronic vehicles, and renewable energy sources. However, rechargeable battery technology has seen little improvement since the invention of the Lithium-Ion battery in the 1980s. The low energy density of the traditionally utilized LiCoO2 cathodic material (specific capacity: 272 mAh g-1), has limited its potential to meet these increasing demands. To solve this problem, our research group is investigating new types of lightweight, organic, polymeric materials with conductive backbones as a possible replacement for the cathodic materials in Lithium-Ion batteries. …

Transmission-Level Impact Analysis Of Utility-Scale Solar Photovoltaic Systems And Battery Energy Storage Grid Support, Gerald W. Bankes Ii

Theses and Dissertations--Electrical and Computer Engineering

Solar photovoltaic energy generation is expected to grow dramatically in coming years in order to take advantage of renewable and clean sources of electricity. This thesis presents research on the impact of increasing solar PV penetration, specifically of large, utility-scale PV facilities, on transmission network performance. The development of Python programming tools for automation of power flow analysis is presented. A modified version of the IEEE 118-Bus test system is developed and modified to simulate increasing PV generation on the transmission system. The impacts on performance are analyzed trends are reported. Battery energy storage systems are studied in this thesis …

Passive And Active Battery Balancing Methods Implemented On Second Use Lithium-Ion Batteries, Walter Bartek

Masters Theses

As the number of electric vehicles (EVs) increases, the number of used battery packs that require disposal increases; however, many of these packs still have useful capacity and can be repurposed. When using repurposed large lithium-ion battery packs, deviations between cells within a pack become problematic. These deviations result in a pack that is unbalanced, affecting performance and proving potentially hazardous when charging. Consequently, a battery management system (BMS) is needed. To provide safety, the BMS in this paper monitors and controls the operation of the battery pack. In addition, it controls the redistribution of charge between the cells within …

Integration Of Large Pv Power Plants And Batteries In The Electric Power System, Oluwaseun M. Akeyo

Theses and Dissertations--Electrical and Computer Engineering

The declining cost of renewables, the need for cleaner sources of energy, and environmental protection policies have led to the growing penetration of inverter-based resources such as solar photovoltaics (PV), wind, and battery energy storage systems (BESS) into the electric power system. The intermittent nature of these resources poses multiple challenges to the power grid and substantial changes in the conventional generation and electrical power delivery practices will be required to accommodate the large penetration of these renewable power plants. The impact of large solar PV penetration on both generation and transmission systems, and the use of BESS to mitigate …

Software-Defined Infrastructure For Iot-Based Energy Systems, Stephen Lee

Doctoral Dissertations

Internet of Things (IoT) devices are becoming an essential part of our everyday lives. These physical devices are connected to the internet and can measure or control the environment around us. Further, IoT devices are increasingly being used to monitor buildings, farms, health, and transportation. As these connected devices become more pervasive, these devices will generate vast amounts of data that can be used to gain insights and build intelligence into the system. At the same time, large-scale deployment of these devices will raise new challenges in efficiently managing and controlling them. In this thesis, I argue that the IoT …

Characterization Of Mechanical Properties Of Thin-Film Li-Ion Batteryelectrodes From Laser Excitation And Measurements Ofzero-Group Velocity Resonances, Jing Yao

Theses and Dissertations

The mechanical properties of thin-film Li-ion battery electrodes are controlled by the micro structure of the constituent materials. In this work, a non-contact and non-destructive measurement of the mechanical properties of electrode films is performed by measurement of zero group velocity (ZGV) resonances. The ZGV Lamb wave modes of a solid bi-layer consisting of a thin metallic layer and a thin compliant coating layer are shown to be dependent on the Young's moduli, thicknesses, densities and Poisson ratios of the layers. Theoretical models are used to quantify the sensitivity of the ZGV resonances to changes in mechanical properties. Experimental ZGV …

Analysis Of The Properties Of Supercapacitors And Possible Applications For The Technology, Vincent Oliveto

Honors Theses

Supercapacitors have a lot of excellent qualities that would make them a great substitute for batteries when it comes to electrical energy storage systems. Supercapacitors can discharge and charge very rapidly, they have a lifespan in the realm of millions of cycles, and they are much more efficient than batteries. Unfortunately, they cannot hold nearly as much charge as batteries. This paper seeks to further investigate the properties of supercapacitor technology and the best way to exploit these properties with the purpose of integrating them into renewable energy systems. There is currently a lot of research occurring around the world …

Autonomous Uav Battery Swapping, Reed Jacobsen, Nikolai Ruhe, Nathan Dornback

Williams Honors College, Honors Research Projects

One of the main hindrances of unmanned aerial vehicle (UAV) technology are power constraints. One way to alleviate some power constraints would be for two UAVs to exchange batteries while both are in flight. Autonomous mid-air battery swapping will expand the scope of UAV technology by allowing for indefinite flight times and longer missions. A single board computer will control each UAV’s flight software to respond to inputs to align with each other mid-flight. When the two UAVs have joined, mechanical components will exchange a depleted battery on the worker UAV for a freshly charged battery that belongs to the …

Novel Technique Of Fabrication Of Porous Copper And Copper Oxide To Improve The Lithium Ion Battery Performance, Raju Prasad Ghimire

Electronic Theses and Dissertations

Due to widespread and long-term application, Lithium-ion batteries are considered as promising power sources for portable devices, satellites, medical instruments, computers, electric vehicles and grid application. It started to occupy the market once Sony commercialized in 1991. Rechargeable lithium ion batteries drawing people attention due to their peculiar properties such as high energy density and low self-discharge compared to other alkali metals. However, these widespread and long-term applications still require better batteries in terms of performance, safety and cost, which can be achieved by better utilization of anode materials and/or an optimized design of battery configuration. There are several challenges …

Dc-To-Dc Buck Converter, Kyle Christopher Roman

Electrical Engineering

The growth of sustainable energy requires many components to work in harmony creating one efficient and effective system. Sustainable energy generation that produces a DC current varying in voltage requires a subsystem to convert voltage to a practical and usable value. The DC to DC Buck converter converts high DC solar generated voltage to a 12V output. This Modular -Level power electronic (MLPE) device performs as a solar charge controller for small lithium ion batteries. Fluctuating voltage levels generated by Photovoltaic cells makes the solar controller a critical part of the solar system. Regulating the DC voltage allows safe and …

Characterization Of Mechanical Properties Of Battery Electrode Films From Acoustic Resonance Measurements, Kathryn Lanae Dallon

Theses and Dissertations

Measurements of the mechanical properties of lithium-ion battery electrode films can be used to quantify and improve manufacturing processes and to predict the mechanical and electrochemical performance of the battery. This thesis demonstrates the use of acoustic resonances to distinguish among commercial-grade battery films with different active electrode materials, thicknesses, and densities. Resonances are excited in a clamped circular area of the film using a pulsed infrared laser or speaker and responses are measured using an electret condenser microphone. A numerical model is used to quantify the sensitivity of resonances to changes in mechanical properties. When the numerical model is …

Battery Energy Storage Emulation For Power System Applications, Jessica Danielle Boles

Masters Theses

The concept of energy storage for power systems has received increasingly more attention in recent decades, and the growing penetration of renewable energy sources has only escalated demand for it. Energy storage systems are excellent for balancing generation and load, for suppressing power fluctuations, and for providing other ancillary services to the grid. The Hardware Testbed (HTB) is a novel converter-based grid emulator created for studying the needs associated with high renewable penetration, but the system currently lacks a battery storage emulator. Thus, this work documents the development of a battery energy storage system (BESS) emulator for the HTB.

The …

Solar Roller - Solar Powered Usb Charging Station, Aaron Bartfeld, Tanner Mjelde, Kaylan Naicker

Electrical Engineering

As the necessity for renewable energy increases, solar power becomes more and more prevalent. At the same time, as technology increases, the necessity for charging one’s electronic devices also increases. The Solar Roller merges solar energy with the ability to charge one's electronic device in one compact cart. The Solar Roller is a solar-powered USB charging station that allows people of all backgrounds to develop a better understanding of alternative fuels, while charging their USB device. It has a touch screen display that provides voltage levels of the battery as well as a TV that displays solar powered information. The …

Property Analysis Of Silylamine Type Reversible Ionic Liquids For Use As A Thermal Safety Switch In Batteries, Showmik Podder

Dissertations and Theses

The increased capacity of the modern battery system has also brought about safety apprehensions. Uncontrollable runaway reactions are a big concern in these systems; these reactions are the result of in situ heat generation and very much increase the risk of explosions and device failures. The concept of this work is to provide a preliminary understanding into the use of a type of switchable solvent known as reversible ionic liquids (RevILs) and their feasibility in being used in electrolytes as a thermally-controlled reversible safety switch. In their pure forms these switchable solvents experience a dramatic change in their properties upon …

Analysis And Simulation Of Photovoltaic Systems Incorporating Battery Energy Storage, Oluwaseun M. Akeyo

Theses and Dissertations--Electrical and Computer Engineering

Solar energy is an abundant renewable source, which is expected to play an increasing role in the grid's future infrastructure for distributed generation. The research described in the thesis focuses on the analysis of integrating multi-megawatt photovoltaics (PV) systems with battery energy storage into the existing grid and on the theory supporting the electrical operation of components and systems. The PV system is divided into several sections, each having its own DC-DC converter for maximum power point tracking and a two-level grid connected inverter with different control strategies. The functions of the battery are explored by connecting it to the …

A New Paradigm Of Maximizing The Wind And Solar Penetration– A Economical Assessment, Yuming Chen

Theses and Dissertations

Wind and solar energies are the most potential and widely-used renewable energies. But in most cases these energies cannot be maximized because of transmission line capacity and their remote location. Therefore, this thesis proposes a new paradigm which using battery transportation and logistics instead of transmission line, to maximize wind and solar energies. The main focus of this work is to investigate the economical feasibilities of this new paradigm.

In the first part, different models and application are presented. The purpose is finding an appropriate model which can make full use of existing grid resources such as transmission line and …

An Economical Model Development For A Hybrid System Of Grid Connected Solar Pv And Electrical Storage System, Mohammad Hasan Balali

Theses and Dissertations

Energy sources management is one of the most important concern in the recent decades. There are finite amount of non-renewable energy sources and one day they will run out if they have been used as primary sources of energy. Renewable energy sources have been significantly reduced the environmental effects. For most of them the source of energy is non-depletable.

One of the concerns associated with renewable resources is uncertainty or unavailability. Energy Storage Systems (ESSs) can help to have more reliable and more efficient systems by adjusting the charge and discharge time and rate. In this study, an economic model …

Universal Programmable Battery Charger With Optional Battery Management System, Michael Duke Desando

Master's Theses

This report demonstrates improvements made in battery charging and battery management technology through the design of a universal programmable battery charger with optional battery management system attachment. This charger offers improvements in charge efficiency and unique battery charging algorithms to charge a variety of battery chemistries with variety of power requirements. Improvements in efficiency result from a synchronous Buck Controller topology as compared to previous universal chargers that use asynchronous Buck-Boost Converter topologies. This battery charger also surpasses current universal battery chargers by offering different charge modes for different battery chemistries. Charge modes provide the user an option between extending …

Energy Neutral Operation Method For Hybrid Energy Storage Integrated With Wind Farm Using C-Rate And Frequency Spectrum Analysis, Young Jun Seo

Theses and Dissertations

In this thesis, the author describes various evaluation criteria, in particular the C-rate (charge/discharge-rate), of energy storage (ES) systems to explain the efficiency and technical benefits of battery-ultracapacitor hybrid energy storage (HES), and the technical characteristics of subsequently derived short-duration and long-duration type ES. In addition, for effective use of energy storage, a straightforward state of charge (SOC) correction method for energy neutral operation is proposed, and through a simple comparative example of ES operation, the effectiveness of HES in relation to simple ES is explained. A case is considered in which a hybrid ES controls the wind power ramp …

Battery Management System, Michael Desando, Kyle Woody

Electrical Engineering

Problem Statement:

There have been recent reports of multi-million dollar companies having to recall entire projects due to their BMS’s malfunctioning or operating incorrectly. The purpose of this project is to analyze the future of batteries, the Lithium-Ion cell, and to exercise a BMS to better understand its capabilities and possible cases for errors. Lithium ion batteries are intolerant of overcharge and overdischarge. Abuse of this kind can result in high temperatures, venting of gases, fire, or explosion. Therefore battery management systems have been devised to prevent such abuse. Recent events such as fires on the Boeing Dreamliner and the …

Development Of A Testing Platform For Secondary-Use Electric Vehicle Batteries As Community Energy Storage Systems, Thomas Benjamin Ollis

Masters Theses

Energy storage is quickly transforming from a commodity to a necessity for electric utilities. The peak demand on the electric grid continues to grow, requiring more sources of generation and upgrades to infrastructure. The variability of renewable generation sources, such as wind and solar, has created more uncertainty on the generation side of the electric grid. Energy storage represents one possible solution to mitigate the demand and uncertainty; however, energy storage systems have historically been too expensive to recoup their capital cost. More recently, research into electric vehicle batteries has brought their cost down and improved performance. As they continue …