Engineering Commons^™

A Feasibility Study Of A Wearable Health Monitoring Device Powered By Thermoelectric Generators, Sarah Schneider

Masters Theses

Implementation of thermoelectric generators (TEGs) as a power source for embedded systems has increased with the push toward alternative and renewable energy sources. Thermoelectric generators produce electrical energy from thermal energy through the Seebeck effect. The Seebeck effect is a phenomenon seen when a temperature difference at a joint of two different metals generates a DC current and electromotive force [1]. This has made TEGs desirable for embedded system applications because it would allow for extended wireless operation. TEGs are based on solid-state technology which means they do not consist of any moving parts which reduces wear and tear with …

Sel4 On Risc-V - Developing High Assurance Platforms With Modular Open-Source Architectures, Michael A. Doran Jr

Masters Theses

Virtualization is now becoming an industry standard for modern embedded systems. Modern embedded systems can now support multiple applications on a single hardware platform while meeting power and cost requirements. Virtualization on an embedded system is achieved through the design of the hardware-software interface. Instruction set architecture, ISA, defines the hardware-software interface for an embedded system. At the hardware level the ISA, provides extensions to support virtualization.

In addition to an ISA that supports hypervisor extensions it is equally important to provide a hypervisor completely capable of exploiting the benefits of virtualization for securing modern embedded systems. Currently there does …

Approximate And Sample Entropy Of Center Of Pressure In Unperturbed Tandem Standing: Contribution Of Embedding Dimension And Tolerance, Jayla Mashae Wesley

Masters Theses

Approximate entropy (ApEn) and sample entropy (SampEn) are statistical methods designed to quantify the regularity or predictability of a time series. Although ApEn has been a prominent choice for use, it is currently unclear as to which method and parameter selection combination is optimal for its application in biomechanics. The goal of this thesis was to examine the difference between ApEn and SampEn related to center of pressure (COP) data during standing balance tasks, while also refining tolerance r, to determine entropy optimization. Six participants completed five 30-second, feet together and tandem standing, trials under eyes-open and eyes-closed conditions. Ground …

Passive And Active Battery Balancing Methods Implemented On Second Use Lithium-Ion Batteries, Walter Bartek

Masters Theses

As the number of electric vehicles (EVs) increases, the number of used battery packs that require disposal increases; however, many of these packs still have useful capacity and can be repurposed. When using repurposed large lithium-ion battery packs, deviations between cells within a pack become problematic. These deviations result in a pack that is unbalanced, affecting performance and proving potentially hazardous when charging. Consequently, a battery management system (BMS) is needed. To provide safety, the BMS in this paper monitors and controls the operation of the battery pack. In addition, it controls the redistribution of charge between the cells within …

A Comparative Study On The Stability And Degradation Of Perovskite Solar Cells, Jyotiska Chakraborty

Masters Theses

This study aims to investigate the environmental factors that affect the performance and longterm stability of the perovskite solar cells (PSCs). PSCs are based on organo-metallic halides (perovskites) that act as a light-sensitive compound that produces excitons when placed under the light. However, PSCs have a limited operating lifetime due to the degradation of the perovskite layer. There are many factors like moisture, UV light, and temperature that lead to the degradation of the perovskite layer. From the literature review, it was found that the PSCs do not degrade with the presence of oxygen in a dry and dark environment. …

Radio Direction Finding Using Pseudo-Doppler For Uav-Based Animal Tracking, Anup Karki

Masters Theses

Radio Direction Finding (RDF) is commonly used for low cost tracking and navigation systems. However, for a low cost application and mobility, the design constraints are highly limited. Pseudo Doppler (PD) can improve RDF capabilities without being cost prohibitive. This work entails the analysis of PD RDF and its potential use for Unmanned Aerial Vehicles (UAV) that are currently employed in wildlife research animal tracking. PD is based on the doppler effect or doppler shift. The doppler effect works like a frequency modulator that increases or decreases the observed frequency depending on whether a signal source is approaching or receding …

Emc Performance Evaluation Of Various Pcb Designs Through Simulation And Measurements, Dimitri Häring

Masters Theses

The applied research presented in this thesis is intended to deepen the understanding of various concepts related to PCB design with respect to EMC and RF performance. The first topic addressed is embedded capacitance of a PCB. The work includes decoupling capacitors and their placement relative to the IC in a combination of three different PCB stack-ups. The evaluation is performed in the frequency domain and time domain. The next topic discussed is the EMC/ EMI filters which are essential measurements to protect a device or subsystem from EMI. The circuit's load is usually unknown. A generic filter design is …

To Study The Current Distributions Of An Antenna In Magnetized Collisional Plasma Via Pffdtd Simulations, Sindhuja Moravineni

Masters Theses

This thesis paper talks about the study of current distributions on dipole antenna immersed in collisional plasma. Analytical models like Balmain’s[6] one dimensional triangular current distribution, Staras[8] proposed and developed by Nikitin’s[10] threedimensional exponential current distribution and the PF-FDTD (Plasma Fluid- Finite Difference Time Domain) model[11] are compared against the Auroral Space Structure Probe (ASSP) flight data in order to show how data analysis can benefit. PF-FDTD model is used to study the antenna in weakly collisional plasma and the comparisons of the analytical and numerical solutions show that numerical model match better for data analysis of flight data sweeps …

Distributed Element Designs For A Wireless System, Nicholas Anthony Dipisa

Masters Theses

A prototype binary frequency shift keying (BFSK) RF link operating in the 2.4 GHz ISM band was identified as a need for a potential undergraduate engineering laboratory activity. This system would be used to showcase various RF circuit engineering principles and techniques such as controlled trace impedances, frequency mixing, voltage-controlled oscillators, distributed element filters, and power splitters. This investigation focused on designing a prototype system that put a priority on ease of measurement and circuit tuning to help foster a more hands on approach. Each major circuit element was broken into separate PCBs to increase the modularity of the design …

Vhf Transmitter Development For Wildlife Tracking, Bryan Westra

Masters Theses

Wildlife biologists often use collars with VHF transmitters to gather wildlife data. The purpose of this project is to determine the best approach to designing a wildlife tracking VHF transmitter on a Printed Circuit Board (PCB). A variety of frequency generation methods were considered for the transmitter, including transistor-based crystal oscillators and chip based solutions from the chip manufacturers Analog Devices and Silicon Labs. Prototypes of the feasible options were built and evaluated for cost, power consumption, efficiency, size, frequency range, signal bandwidth, and frequency stability. It was found that the Silicon Labs Si4010 chip was the best solution based …

Power Optimization Of Solar Powered Standalone Wireless Sensor System, Rajan Amatya

Masters Theses

Wireless sensor systems are common in applications where harsh environmental conditions or remote locations make it difficult to run wires. Having these sensor systems self-powered is essential as it is difficult for battery replacement. Using solar as an alternative source of energy can be a medium to charge the battery in such scenarios. With an increasing number of portable devices powered by battery; more and more research is focused on low-power design technique. For this thesis, a microcontroller (Texas Instruments MSP432) was used along with a digital sensor (Bosch BME280) to provide temperature, pressure and humidity information, and Wi-Fi module …

Fusion Of Audio And Visual Information For Implementing Improved Speech Recognition System, Vikrant Satish Acharya

Masters Theses

Speech recognition is a very useful technology because of its potential to develop applications, which are suitable for various needs of users. This research is an attempt to enhance the performance of a speech recognition system by combining the visual features (lip movement) with audio features. The results were calculated using utterances of numerals collected from participants inclusive of both male and female genders. Discrete Cosine Transform (DCT) coefficients were used for computing visual features and Mel Frequency Cepstral Coefficients (MFCC) were used for computing audio features. The classification was then carried out using Support Vector Machine (SVM). The results …