Engineering Commons^™

Wireless Power Receiver With Tripler Circuit, Boost Converter And Supercapacitor, Bradley Clayton

Symposium of Student Scholars

This presentation lays out the groundwork, advancements, and results of a three-stage wireless power receiver with the purpose of providing power to low-power electronic equipment that operate at 5V. The receiver incorporates an impedance matching network, a tripler circuit, a boost converter, and a super capacitor. The impedance matching network has been designed for 1GHz but through testing the receiver with a signal generator followed by an antenna, it has been found that the signal frequency of 996MHz yields optimal energy capture at the tested received power levels of 0dBm, 3dBm, and 6dBm. The signal is produced from a signal …

Novel Vehicle-To-Everything Rollover Antenna, Aya Alazzawi

Symposium of Student Scholars

Rollover Vehicle-to-Everything Antenna

Poster Presentation Undergraduate Student: Aya Alazzawi

Research Mentor(s): Dr. Billy Kihei

Soft robotics is a new field of engineering ready to be explored, because of its use of unconventional materials it can withstand copious amounts of stress which makes it ideal for applications involving vehicular accidents. In this groundbreaking work, we attempt to integrate soft robotics technologies with Vehicle-to-Everything (V2X) communications. Specifically, we introduce the preliminary planning stages for creating a novel V2X rollover antenna that can reduce road deaths and provide more reliable accident data. An up-right roof-mounted antenna could be damaged during a roll-over accident …

Pulmon-C: A Real-Time Monitoring Framework Of Pulmonary Function, Md Saiful Islam, Maria Valero, Shahriar Hossain

Symposium of Student Scholars

This project will develop PulMon-C, a real-time monitoring framework of pulmonary function to diagnose COVID-19 patients who are being self-quarantined at home. The tool will identify anomalies in breathe rate and predict pulmonary deterioration to raise alert for immediate actions. The uniqueness of the tool is using non-invasive sensors placed under-mattress that are able to communicate data about the respiratory signal. The customer segment of PulMon-C will be the diagnosed COVID-19 patients and healthcare providers. PulMon-C will assist with the remote monitoring of COVID-19 patients as an urgent need in the USA and will bring larger impact in delivering …

Oral Minimal Model For Gestational Diabetes, Sarah Peters

Symposium of Student Scholars

Gestational diabetes is one of the most common issues that a pregnant woman encounters that could result in harm to both the woman and child. Due to this issue, the woman’s glucose and insulin levels should be carefully monitored throughout her pregnancy to assess the need for prescribed diabetic medication to help regulate those levels. In this research, the objectives is to develop a MATLAB computer program of the Oral Minimal Model, which is a model that can be used to estimate a person’s insulin sensitivity from an oral glucose tolerance test (OGTT) where plasma glucose and insulin levels are …

Source Localization Of Electroencephalogram (Eeg) Waves With Convolutional Neural Network, Terence Onyewuenyi

Symposium of Student Scholars

This paper investigates the use of deep learning as a means for quantification and source localization of prioritizing electroencephalogram (EEG) waves for the purpose of detecting different eye states of human subjects. The Convolutional Deep Learning tool is trained to recognize EEG reading corresponding to a set of different eye movements as generated by watching different action scenes. The results also predict whether the subjects' eyes are open or closed. Source localization is performed next on the EEG data to focus on the different EEG components which primarily contribute to the activity. This was done by using a convolutional neural …

Framework For Collecting Data From Iot Device, Md Saiful Islam

Symposium of Student Scholars

The Internet of Things (IoT) is the most significant and blooming technology in the 21st century. IoT has rapidly developed by covering hundreds of applications in the civil, health, military, and agriculture areas. IoT is based on the collection of sensor data through an embedded system, and this embedded system uploads the data on the internet. Devices and sensor technologies connected over a network can monitor and measure data in real-time. The main challenge is to collect data from IoT devices, transmit them to store in the Cloud, and later retrieve them at any time for visualization and data analysis. …

Data Analysis Methods For Health Monitoring Sensors, Shahriar Sobhan

Symposium of Student Scholars

Innovations in health monitoring systems are fundamental for the continuous improvement of remote healthcare. With the current presence of SARS-CoV-2, better known as COVID-19, in people’s daily lives, solutions for monitoring heart and especially respiration and pulmonary functions are more needed than ever. Besides, health monitoring systems are widely used for patients who need isolated care, unconscious patients who cannot get medical attention for themselves. As it is well-known, monitoring systems rely on sensor technologies. Currently, there are multiple research studies for remote monitoring using different types of sensors. In this effort, we survey the current approaches that utilize the …

The Future Of Artificial Intelligence, Alex Guerra

Emerging Writers

Whether we like it or not Artificial Intelligence (AI) is coming, and we are not ready for it. AI has unimaginable potential and will revolutionize the world over the next few decades, but with this great potential we are faced with choices that could prove detrimental to humanity. This article examines the challenges AI presents and explores possible solutions to make AI align with human interests.

Project Blipper, Peter Jacobs, Preston Delaware, Ryan Foster

Senior Design Project For Engineers

This project was sponsored by Clorox to design and create an automatic bottle-unscrambling system for possible implementation at their bottling plant in Chile. The objective was to use a robotic arm to unscramble bottles from an incoming conveyor belt and place them upright on an outbound conveyor belt. Throughout the research, design, and testing of solutions for this project, several design alternatives were found for each discipline, and will be presented to Clorox so that they can make an informed decision for how and if they want to move forward with implementation of this project.

The project was split into …

Enercon Station Vacuum Pump Replacement, Clint Hembree, Jared D'Amico, Connor Moore, Paul Jeffrey Fontenot, Sydnee Castello, J.J. Clements

Senior Design Project For Engineers

This details the progress of the ENERCON pump replacement project as completed by the Kennesaw State University interdisciplinary senior design group. This project is a two-semester capstone effort for the engineering program at Southern Polytechnic School of Engineering, overseen by Dr. McFall during Fall 2020 and Dr. Khalid during Spring 2021 semesters. The 2020-2021 KSU Interdisciplinary Senior Design team was tasked with completing an Engineering Change Package (ECP) for existing vacuum pumps at ENERCON Station. The mechanical, electrical, and civil students worked together, performing evaluations on existing plant systems to ensure the plant could support the new vacuum pumps. By …

Kennesaw State University And United Alloy Corporation Robotic Pick And Place Project, Kathryn Bharadwaj, Logan Spencer, Tharkun Hudlow

Senior Design Project For Engineers

United Alloy Corporation (UAC), a company specializing in unique aluminum parts for aeronautics, needed a fix to their error prone, labor-intensive billet press operation. The process has a problem of adding the wrong size or wrong alloy billet to the induction oven, which results in a waste of raw materials. The billets range from ten to thirty-seven inches in length and weigh up to three hundred pounds. Currently, an operator uses a gantry crane to check and lift the billets from a rack onto the magazine of an induction oven. The magazine can hold up to three billets safely and …

Interferometry In Fmcw Radars, Assid Nait, Theodore Grosch

The Kennesaw Journal of Undergraduate Research

interferometry is used in many fields using all frequencies of the electromagnetic spectrum and sound waves. In this study, data was collected from an FMCW radar is used at multiple heights above a flat surface on which sat a single retroreflector. These data were post-processed to discover the signal obtained from the target and then the phase form the radar at multiple locations was compared. Using the known geometry and measured phase, we find the interferometry is possible using a freerunning radar under certain geometric conditions.