Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 14 of 14

Full-Text Articles in Engineering

Engineered Surfaces To Control Secondary Electron Yield For Multipactor Suppression, James M. Sattler Sep 2017

Engineered Surfaces To Control Secondary Electron Yield For Multipactor Suppression, James M. Sattler

Theses and Dissertations

A significant problem for satellites, vacuum electron devices, and particle accelerators is multipactor: an avalanche of electrons caused by recurring secondary electron emission (SEE) in a time-varying electric field. The consequences of multipactor range from temporary to permanent device failure. This research studied how surface topography can be engineered to minimize SEE and suppress multipactor. Two new semi-empirical models (one based on a 2D pore, the other based on a 3D pore) were developed to predict the secondary electron yield (SEY) of a porous surface based on pore aspect ratio and porosity. The models were validated with experimental SEY measurements …


Synthesis Of Non-Uniformly Correlated Partially Coherent Sources Using A Deformable Mirror, Milo W. Hyde Iv, Santasri Bose-Pillai, Ryan A. Wood Sep 2017

Synthesis Of Non-Uniformly Correlated Partially Coherent Sources Using A Deformable Mirror, Milo W. Hyde Iv, Santasri Bose-Pillai, Ryan A. Wood

Faculty Publications

The near real-time synthesis of a non-uniformly correlated partially coherent source using a low-actuator-count deformable mirror is demonstrated. The statistical optics theory underpinning the synthesis method is reviewed. The experimental results of a non-uniformly correlated source are presented and compared to theoretical predictions. A discussion on how deformable mirror characteristics such as actuator count and pitch affect source generation is also included.


On-Chip, High-Sensitivity Temperature Sensors Based On Dye-Doped Solid-State Polymer Microring Lasers, Lei Wan, Hengky Chandrahalim, Cong Chen, Qiushu Chen, Ting Mei, Yuji Oki, Naoya Nishimura, Lingjie Jay Guo, Xudong Fan Aug 2017

On-Chip, High-Sensitivity Temperature Sensors Based On Dye-Doped Solid-State Polymer Microring Lasers, Lei Wan, Hengky Chandrahalim, Cong Chen, Qiushu Chen, Ting Mei, Yuji Oki, Naoya Nishimura, Lingjie Jay Guo, Xudong Fan

Faculty Publications

We developed a chip-scale temperature sensor with a high sensitivity of 228.6 pm/°C based on a rhodamine 6G (R6G)-doped SU-8 whispering-gallery mode microring laser. The optical mode was largely distributed in a polymer core layer with a 30 μm height that provided detection sensitivity, and the chemically robust fused-silica microring resonator host platform guaranteed its versatility for investigating different functional polymer materials with different refractive indices. As a proof of concept, a dye-doped hyperbranched polymer (TZ-001) microring laser-based temperature sensor was simultaneously developed on the same host wafer and characterized using a free-space optics measurement setup. Compared to TZ-001, the …


Real-Time Camera Tracking System Using Optical Flow Feature Points, Daniel D. Doyle, Alan L. Jennings, Jonathan T. Black Jul 2017

Real-Time Camera Tracking System Using Optical Flow Feature Points, Daniel D. Doyle, Alan L. Jennings, Jonathan T. Black

AFIT Patents

A new apparatus and method for tracking a moving object with a moving camera provides a real-time, narrow field-of-view, high resolution and on target image by combining commanded motion with an optical flow algorithm for deriving motion and classifying background. Commanded motion means that movement of the pan, tilt and zoom (PTZ) unit is “commanded” by a computer, instead of being observed by the camera, so that the pan, tilt and zoom parameters are known, as opposed to having to be determined, significantly reducing the computational requirements for tracking a moving object. The present invention provides a single camera pan …


Measuring The Reflection Matrix Of A Rough Surface, Kenneth W. Burgi, Michael A. Marciniak, Mark E. Oxley, Stephen E. Nauyoks May 2017

Measuring The Reflection Matrix Of A Rough Surface, Kenneth W. Burgi, Michael A. Marciniak, Mark E. Oxley, Stephen E. Nauyoks

Faculty Publications

Phase modulation methods for imaging around corners with reflectively scattered light required illumination of the occluded scene with a light source either in the scene or with direct line of sight to the scene. The RM (reflection matrix) allows control and refocusing of light after reflection, which could provide a means of illuminating an occluded scene without access or line of sight. Two optical arrangements, one focal-plane, the other an imaging system, were used to measure the RM of five different rough-surface reflectors. Intensity enhancement values of up to 24 were achieved. Surface roughness, correlation length, and slope were examined …


Pvdf-Trfe Electroactive Polymer Mechanical-To-Electrical Energy Harvesting Experimental Bimorph Structure, William G. Kaval, Robert A. Lake, Ronald A. Coutu Jr. May 2017

Pvdf-Trfe Electroactive Polymer Mechanical-To-Electrical Energy Harvesting Experimental Bimorph Structure, William G. Kaval, Robert A. Lake, Ronald A. Coutu Jr.

Faculty Publications

Research of electrostrictive polymers has generated new opportunities for harvesting energy from the surrounding environment and converting it into usable electrical energy. Electroactive polymer (EAP) research is one of the new opportunities for harvesting energy from the natural environment and converting it into usable electrical energy. Piezoelectric ceramic based energy harvesting devices tend to be unsuitable for low-frequency mechanical excitations such as human movement. Organic polymers are typically softer and more flexible therefore translated electrical energy output is considerably higher under the same mechanical force. In addition, cantilever geometry is one of the most used structures in piezoelectric energy harvesters, …


A Framework For Categorization Of Industrial Control System Cyber Training Environments, Evan G. Plumley Mar 2017

A Framework For Categorization Of Industrial Control System Cyber Training Environments, Evan G. Plumley

Theses and Dissertations

First responders and professionals in hazardous occupations undergo training and evaluations for the purpose of mitigating risk and damage. For example, helicopter pilots train with multiple categorized simulations that increase in complexity before flying a real aircraft. However in the industrial control cyber incident response domain, where incident response professionals help detect, respond and recover from cyber incidents, no official categorization of training environments exist. To address this gap, this thesis provides a categorization of industrial control training environments based on realism. Four levels of environments are proposed and mapped to Blooms Taxonomy. This categorization will help organizations determine which …


Autoprov: An Automated File Provenance Collection Tool, Ryan A. Good Mar 2017

Autoprov: An Automated File Provenance Collection Tool, Ryan A. Good

Theses and Dissertations

A file's provenance is a detailing of its origins and activities. There are tools available that are useful in maintaining the provenance of a file. Unfortunately for digital forensics, these tools require prior installation on the computer of interest while provenance generating events happen. The presented tool addresses this by reconstructing a file's provenance from several temporal artifacts. It identifies relevant temporal and user correlations between these artifacts, and presents them to the user. A variety of predefined use cases and real world data are tested against to demonstrate that this software allows examiners to draw useful conclusions about the …


Predicting Solar Performance In A Contingency Environment To Meet Net-Zero Facility Power, Anthony D. Williams Mar 2017

Predicting Solar Performance In A Contingency Environment To Meet Net-Zero Facility Power, Anthony D. Williams

Theses and Dissertations

The U.S. government is involved in contingency operations all over the world and these operations require operational support and sustainment in these locations; this includes the reliable delivery of power to base infrastructure. The traditional means of delivering this support requirement in austere environments has been the use of diesel-power generation that has an extensive logistical and economic tail. The research sought out contingency solar applications that may be implemented and operated to offset the facility demand loads in the location to achieve net-zero power. This research explores the technical feasibility of a deployable photovoltaic microgrid to deliver power to …


Sound Based Positioning, David L. Weathers Mar 2017

Sound Based Positioning, David L. Weathers

Theses and Dissertations

With a growing interest in non-GPS positioning, navigation, and timing (PNT), sound based positioning provides a precise way to locate both sound sources and microphones through audible signals of opportunity (SoOPs). Exploiting SoOPs allows for passive location estimation. But, attributing each signal to a specific source location when signals are simultaneously emitting proves problematic. Using an array of microphones, unique SoOPs are identified and located through steered response beamforming. Sound source signals are then isolated through time-frequency masking to provide clear reference stations by which to estimate the location of a separate microphone through time difference of arrival measurements. Results …


Applying Cyber Threat Intelligence To Industrial Control Systems, Matthew P. Sibiga Mar 2017

Applying Cyber Threat Intelligence To Industrial Control Systems, Matthew P. Sibiga

Theses and Dissertations

A cybersecurity initiative known as cyber threat intelligence (CTI) has recently been developed and deployed. The overall goal of this new technology is to help protect network infrastructures. Threat intelligence platforms (TIPs) have also been created to help facilitate CTI effectiveness within organizations. There are many benefits that both can achieve within the information technology (IT) sector. The industrial control system (ICS) sector can also benefit from these technologies as most ICS networks are connected to IT networks. CTI and TIPs become resourceful when using indicators of compromise (IOCs) from known ICS malware attacks and an open source intrusion detection …


Satellite Communications In The V And W Band: Natural And Artificial Scintillation Effects, David A. Smith Mar 2017

Satellite Communications In The V And W Band: Natural And Artificial Scintillation Effects, David A. Smith

Theses and Dissertations

In a natural atmospheric environment the troposphere will be the primary source of loss with the ionosphere loss being negligible. If the ionosphere was disturbed from a high altitude nuclear explosion (HANE) more than three times the amount of electrons would be present in the ionosphere and could represent a source of significant loss. In order to determine the amount of electrons distributed from a HANE, GSCENARIO, developed by Defense Threat Reduction Agency was used. The two sources of loss that were examined was signal absorption and amplitude scintillation. Signal loss was determined using GSCENARIO and amplitude scintillation loss was …


Framework For Industrial Control System Honeypot Network Traffic Generation, Htein A. Lin Mar 2017

Framework For Industrial Control System Honeypot Network Traffic Generation, Htein A. Lin

Theses and Dissertations

Defending critical infrastructure assets is an important but extremely difficult and expensive task. Historically, decoys have been used very effectively to distract attackers and in some cases convince an attacker to reveal their attack strategy. Several researchers have proposed the use of honeypots to protect programmable logic controllers, specifically those used to support critical infrastructure. However, most of these honeypot designs are static systems that wait for a would-be attacker. To be effective, honeypot decoys need to be as realistic as possible. This paper introduces a proof-of-concept honeypot network traffic generator that mimics genuine control systems. Experiments are conducted using …


Experimental Validation Of A Heterogeneous Radar Clutter Statistical Estimation Method, Elliot R. Erstein Mar 2017

Experimental Validation Of A Heterogeneous Radar Clutter Statistical Estimation Method, Elliot R. Erstein

Theses and Dissertations

Radar clutter models are important for radar target detection when clutter is present. A new method for estimating single clutter type, homogeneous, radar clutter statistics through measurement of a multiple type, heterogeneous clutter was developed in 2015 by researchers at the Air Force Institute of Technology. The estimation method is greatly valued in the clutter research and modeling world for reducing clutter campaign measurement time and cost. This thesis looks at validation steps for the estimation method through the use of simulations and experimental radar clutter measurements.