Engineering Commons^™

Bio-Binder—Innovative Asphalt Technology, Amir Tabakovic

Articles

The global road network spans 16.3 million km [1], of which 5 million km is in the EU. These road networks fulfil major economic and social goals by facilitating the movement of goods and people throughout the EU, and are therefore of the utmost importance to the economic and social life of the EU [2]. National governments invest heavily in their road networks, e.g., in 2014, EUR 53.33 billion was invested in the development and maintenance of the EU road network [3]. Each year, the world produces 1.6 trillion tonnes of asphalt [4], of which 218 million tonnes is produced …

Geospatial-Based Environmental Modelling For Coastal Dune Zone Management, Chen Suo

Doctoral

Tomaintain biodiversity and ecological functionof coastal dune areas, itis important that practical and effective environmentalmanagemental strategies are developed. Advances in geospatial technologies offer a potentially very useful source of data for studies in this environment. This research project aimto developgeospatialdata-basedenvironmentalmodellingforcoastaldunecomplexestocontributetoeffectiveconservationstrategieswithparticularreferencetotheBuckroneydunecomplexinCo.Wicklow,Ireland.Theprojectconducteda general comparison ofdifferent geospatial data collection methodsfor topographic modelling of the Buckroney dune complex. These data collection methodsincludedsmall-scale survey data from aerial photogrammetry, optical satellite imagery, radar and LiDAR data, and ground-based, large-scale survey data from Total Station(TS), Real Time Kinematic (RTK) Global Positioning System(GPS), terrestrial laser scanners (TLS) and Unmanned Aircraft Systems (UAS).The results identifiedthe advantages and disadvantages of …

Trades And Apprenticeship Survey 2020: Focus On Wet Trades, Roisin Murphy

Reports

CIF commissioned the Trades and Apprenticeship Survey 2020 – Focus on Wet Trades report to investigate the causes and implications of the low numbers entering wet trades (Bricklaying, floor and wall tiling, Painting and Decorating and Plastering). The objective for commissioning expert research was to fully understand whether the current model is appropriate for the sector or simply requires a new approach.

The research, carried out by Dr. Róisín Murphy, undertook a multi-stakeholder analysis, to determine the causes and challenges facing wet trades and apprenticeship in Ireland.

The report proposes six recommendations and addresses an Apprenticeship model review, Education and …

Economic Analysis Of Productivity In The Irish Construction Sector, Kpmg, Fac, Róisín Murphy Dr, Avril Behan

Reports

Important strides to enhance productivity in the construction sector have been taken by both industry and Government in recent years. However, a collaborative, sectoral wide strategy to drive further increases in productivity is required, with the coordinated participation of all stakeholders across the full life cycle of a project. This report, commissioned by the Department of Public Expenditure and Reform (DPER), produced by KPMG and Future Analytics Consulting Ltd. (FAC) and peer reviewed by TU Dublin, aims to understand and address the reasons for low levels of productivity in the Irish construction sector and identify specific recommendations and actions that …

A Method For Uncertainty Managementin Life Cycle Assessment Studies –A Tiered-Hybrid Case Study Of An Irish Construction Project, Deidre Wolff

Doctoral

Life Cycle Assessment (LCA) quantifies the potential environmental impact of a product system throughout its life cycle from raw material extraction, production, manufacture, use and maintenance through to final disposal. The results from LCA studies are often used to support decision-making processes andpolicy development. LCA is conducted in four iterative steps, beingGoal and Scope definition, Life Cycle InventoryAnalysis (LCI), Life Cycle Impact Assessment (LCIA), andInterpretation. The guidelines for each step are provided in the International Organization for Standardization (ISO) standards, ISO 14040:2006 and 14044:2006. Uncertainty arises in all steps of an LCA,yet the propagation and reporting of these uncertainties is …

Simulating Cement Hydration Using Hydcem, Niall Holmes, Denis Kelliher, Mark Tyrer

Articles

HYDCEM is a new cement hydration model to simulate volumetric changes and predict phase assemblage, degree of hydration, heat release, compressive strength and chemical shrinkage over time for PC and limestone binders undergoing hydration for any w/c ratio and curing temperatures between 5 and 45 °C. While models should never completely remove experimental analysis, they are an aid to better understand cement hydration and microstructure development by allowing users analyse different binders in a relatively short time. HYDCEM, written in MATLAB®, is aimed at complementing more sophisticated thermodynamic models giving users a reasonable prediction of hydration behaviour over time, using …

A Novel Self-Healing System: Towards A Sustainable Porous Asphalt, Shi Xu, Xueyan Liu, Amir Tabakovic, Erik Schlangen

Articles

Self-healing asphalt, aimed to produce a sustainable asphalt pavement using green technology, has been studied in the past two decades. Technologies including encapsulated rejuvenator and induction heating have been proposed, demonstrated in the laboratory, and gradually evaluated in field application. This paper looks into the synergy effect of the above two technologies, where induction heating serves as the asphalt damage repair mechanism, requiring just 2 min heating time and encapsulated rejuvenator will replenish (rejuvenate) aged asphalt binder and reinstate bitumen’s healing ability. Moreover, the increased temperature from induction heating could in turn accelerate the diffusion process of rejuvenator into aged …

Sustainable And Resilient Construction: Current Status And Future Challenges, Niamh Murtagh, Lloyd Scott, Jingli Fan

Articles

The construction industry globally is one of the most environmentally damaging of sectors. Additionally, the resources consumed and the operational energy requirements of buildings are ‘locked-in’, potentially for decades. The Intergovernmental Panel on Climate Change has recognised construction as a sector in which significant improvements can, and indeed must, be made. But the industry is often argued to be unique, in its multiplicity of stakeholders, transient organisational structures, avoidance of risk and impact on society. The current Virtual Special Issue (VSI) sought to bring together a collection of papers on progress and potential for improvement in the construction sector, in …

Why Are Residential Property Developers In Ireland Not Using Bim?, Bim Tudublin, Simon Burke

Capstone Reports

The aim of this paper is to establish the level of BIM adoption by larger-scale residential property developers in Ireland and investigate the benefits and challenges of implementing BIM for residential housing. While BIM is a relatively new concept in Ireland for housing, developers and investors in larger scale developments are beginning to recognize areas where BIM can add value to their projects. The research also indicates that while there is evidence of successful BIM implementation for housing resulting in savings in cost and time, widespread adoption is hindered by a lack of knowledge and skills, costs of implementation, lack …

A Comparative Study Of Cadworx Plant 2018 And Revit 2020 With Ez-Iso Add-In, For The Production Of Piping Isometrics, Bim Tudublin, Killian Lynch

Capstone Reports

BIM software evaluation and selection is a complex process. In this paper, a comparative study of Revit 2020 with Ez-ISO add-in, and CADWorx Plant 2018, was carried out. The aim of this study was to determine if a MEP contractor could consolidate software usage into one package, thereby reducing costs for pipework modelling and isometric production. A comprehensive evaluation was developed based on a literature review. A multicriteria decision-making method was used in conjunction with the software evaluation to ensure sound choices were made. An online survey of senior BIM professionals was conducted to validate the analysis and findings. The …

A Review Of The Second Level Construction Studies Syllabus In Ireland: In Response To A Changing Technological Environment Promoting Digital Construction, Bim Tudublin, Nigel Wearen

Capstone Reports

The zeitgeist of Construction Studies ought to adopt digital construction and work practises. However, legacy is slow to change/adapt, and a lack of awareness persists. From the perspective of the continuing legacy (vocational training) of Construction Studies being linked with industry, this research explores how the subject could evolve to deliver new digital skill sets and to meet the demands of the Architecture, Engineering, and Construction (AEC) sector.A pilot study was undertaken with 24 Transition Year students. The method and content of the study was based on an existing model from the Design Engineering Construction in the UK and was …

Steel Model Approval: Can Bim Provide A Drawing-Free Approval Process?, Bim Tudublin, David Reynolds

Capstone Reports

Despite widespread use of Building Information Modelling (BIM) software used within their industry, the approval of steelwork contractor’s design information is largely based on the approval of 2d-drawings. These workflows can be modernised to take advantage of current technology and provide productivity gains, but barriers to change exist. This research is an attempt to answer the research question of if a model-based approval process, which removes the need for drawings, is achievable. To answer this question, a mixed methodology was used. A literature review was performed to understand how the approval process works, what information is required and what BIM …

A Critical Appraisal Of Findings And Solutions To Overcome Erroneous Bim Model Production And Information Delivery Workflows, Bim Tudublin, Ryan Forde

Capstone Reports

There are many varying definitions of Building Information Modelling, all of which reflect its transformative capabilities and impact on the construction sector. BIM is an emerging technological and procedural shift within the AEC industry (Succar, 2009). BIM is not just a technological change, but also a procedural and workflow change (Charles Eastman, 2018). Despite the growth of BIM adoption and increasing levels of maturity regarding BIM standards, numerous issues still arise at a micro level during project execution. BIM invokes the need for workflows, frameworks and processes that imparts knowledge, heightens trust, increases efficiency and consistency while reducing fragmentation and …

Can The Integration Of Bim And Gis Enhance Information Management For Large Scale Linear Infrastructure Projects?, Bim Tudublin, Brendan Kennedy

Capstone Reports

The integration of BIM and GIS is the subject of considerable research, particularly as the two coalesce for the purpose of information management. Large scale infrastructure projects require best practice in terms of how information is managed given the volume of information generated throughout the project lifecycle and the numerous parties requiring access to project content. This paper investigates whether the integration of BIM and GIS can enhance information management on large scale linear infrastructure projects. The research comprised a literature review and interviews with a number of BIM/GIS professionals actively working on linear infrastructure projects across the world. Some …

The Integration Between Strategy Formulation And Implementationin Construction Contracting Firms In Ireland, Ahmed Hassan

Doctoral

The role of the construction sector in Ireland is critical in terms of the economic and social development however the economic, competitive, and regulatory business environment present a myriad of complexities to firms operating within the sector. The importance of strategic planning for business survival and prosperity has been well documented over several decades of research but there remains a paucity of empirical evidence to determine the in strategic decision-making process under these volatile environmental conditions.This study addresses the perceptible gap in existing knowledge by investigating the characteristics of the strategy strategic decision-making process, strategic choices, and implementation process in …

Thermal Analysis And Post Construction Verification, Cormac Flood, Lloyd Scott

Articles

Purpose – The residential sector in Ireland accounted for 25 per cent of energy related CO2 emissions in 2016 through burning fossil fuels, a major contributor to climate change. In support of Ireland’s CO2 reduction targets, the existing housing stock could contribute greatly to the reduction of space-heating energy demand through retrofit. Approximately 50 per cent of Ireland’s 2m dwellings pre-date building regulations and are predominantly of cavity and solid wall construction, the performance of which has not been extensively investigated at present. Although commitment to thermal upgrade/retrofit of existing buildings may increase under future government policies, the poor characterisation …

A Framework For Sustainable Procurement Practice In The Irish Construction Industry, Duga Jamus Ewuga

Doctoral

The Architectural, Engineering and Construction (AEC) sector has been called upon to develop innovative strategies to drive sustainability. Despite the efforts and commitments made, their performance is still observed to be low, this has been linked to the low level of understanding of practitioners. Also noted was the lack of interest by firms due to the uncertainty of the benefits of committing to long term investments. Nevertheless, academic literature and reports have stated that firms nowadays utilise their procurement mechanism to drive their sustainability practice. However, there is a gap in understanding how construction firms adopt and embed sustainability in …