Open Access. Powered by Scholars. Published by Universities.®
- Keyword
-
- Constructed wetlands (2)
- Oil pollution of soils (2)
- Response surfaces (Statistics) (2)
- Aquifers (1)
- Artificial substrates (Aquatic biology) (1)
-
- Biochemical oxygen demand--Mathematical models (1)
- Biodegradation--Simulation methods (1)
- Bioremediation (1)
- C-17 (Jet transport)--Environmental aspects (1)
- Charleston Air Force Base (S.C.) (1)
- Decision support systems (1)
- Explosive ordnance disposal--Environmental aspects (1)
- Fens (1)
- Glass waste--Costs (1)
- Groundwater flow--Simulation methods (1)
- Groundwater flow--Statistical methods (1)
- Groundwater--Mathematical models (1)
- Hydraulic measurements (1)
- Jet planes--Fuel--Biodegradation (1)
- Kriging (1)
- Life cycle costing (1)
- Parameter estimation (1)
- Pollution prevention--Economic aspects (1)
- Radioactive wastes--Management (1)
- Recycling (1)
- Refuse and refuse disposal--Decision making (1)
- Runoff (1)
- Smoke plumes--Mathematical models (1)
- Soil remediation (1)
- Soil remediation--Cold weather conditions (1)
Articles 1 - 15 of 15
Full-Text Articles in Engineering
Geostatistical Analysis Of Hydraulic Conductivity In Heterogeneous Aquifers, Craig S. Biondo
Geostatistical Analysis Of Hydraulic Conductivity In Heterogeneous Aquifers, Craig S. Biondo
Theses and Dissertations
Observations of the spatial variability of hydraulic conductivity of the heterogeneous alluvial aquifer at Columbus Air Force Base in Mississippi are analyzed using parametric geostatistical approaches. Field studies have revealed that the heterogeneity of the aquifer hydraulic conductivity field controls the movement and dispersion of groundwater solutes. Therefore, a means of quantifying spatial variability is essential for the application of flow and solute transport models to practical problems. Application of these models requires a large number of hydraulic conductivity measurements. Geostatistical analysis and kriging estimation procedures assist in providing these large numbers of values when sampling designs have provided sparse …
Evaluating The Feasibility Of Sequential Indicator Simulation In Reproducing Spatial Connectivity In A Heterogeneous Transmissivity Field, D. Duane Kenyon
Evaluating The Feasibility Of Sequential Indicator Simulation In Reproducing Spatial Connectivity In A Heterogeneous Transmissivity Field, D. Duane Kenyon
Theses and Dissertations
A Non-Parametric estimation technique was used to simulate realizations of a heterogeneous transmissivity field based upon sampled values from three different sampling scenarios. These realizations were compared to output from a parametric estimation technique with respect to truth as defined by an exhaustive data set of 6,000 transmissivity values. Estimated transmissivity fields were then used as input into a flow model from which fields of heads and specific discharges were obtained and compared. Given the financial limitations imposed upon the number and quality of samples reasonably available, Sequential Indicator Simulation, a non-parametric technique, was shown to be of considerable value …
Validation Testing A Contaminant Transport And Natural Attenuation Simulation Model Using Field Data, Steven J. Flier
Validation Testing A Contaminant Transport And Natural Attenuation Simulation Model Using Field Data, Steven J. Flier
Theses and Dissertations
This research extends the work begun by Enyeart (1994) which evaluated the process of intrinsic bioremediation, and which developed a model for predicting the velocity of an aerobic degradation front, as it traverses the length of a JP-4 contaminant plume. It is assumed this aerobic front will traverse the contaminant plume as dissolved oxygen is carried by the ground water through the sorption-retarded contaminant. The ultimate purpose of Enyeart's model is to use it to develop field guidance for assessing the feasibility of intrinsic bioremediation to restore petroleum-contaminated soils. After simulating intrinsic bioremediation many times with a spreadsheet model, results …
In Situ Warming And Soil Venting To Enhance The Biodegradation Of Jp-4 In Cold Climates: A Critical Study And Analysis, Ricky D. Cox
In Situ Warming And Soil Venting To Enhance The Biodegradation Of Jp-4 In Cold Climates: A Critical Study And Analysis, Ricky D. Cox
Theses and Dissertations
Numerous bioremediation projects have proven effective in accelerating contaminant biodegradation by injecting oxygen into the vadose zone with a technique called bioventing. In cold climates, bioremediation is limited to the summer when soil temperatures are sufficient to support microbial growth. Laboratory studies directly correlate increased biodegradation rates with temperature. By raising soil temperatures, in situ jet fuel remediation can be accelerated which was shown by a bioventing project conducted in 1991 at Eielson AFB, Alaska, where three soil warming techniques were used. Two methods actively warmed the soil - warm water circulation and heat tape; the other passively warmed the …
A Case Study Of The Environmental Impacts Of The Beddown Of The C-17 Globemaster Iii At Charleston Afb, Richard H. Houghton Jr.
A Case Study Of The Environmental Impacts Of The Beddown Of The C-17 Globemaster Iii At Charleston Afb, Richard H. Houghton Jr.
Theses and Dissertations
Unites States Air Force acquisition environmental planning has changed significantly since the passage of the National Environmental Policy Act in 1969. This research examined the role of environmental planning in weapon system acquisition. It focused on environmental planning performed for the C-17 Globemaster III prior to its beddown at Charleston Air Force Base. The case study of the C- 17 beddown included interviews, archival record reviews, and direct observations at the base. Evidence was collected to determine what environmental impacts occurred during the beddown. An environmental postaudit compared actual impacts with those predicted in environmental planning documentation. Impacts were analyzed …
Comparison Of Gravel Substrate Vs Soil Substrate For The Construction Of An Experimental Fen, Carolyn S. Langley
Comparison Of Gravel Substrate Vs Soil Substrate For The Construction Of An Experimental Fen, Carolyn S. Langley
Theses and Dissertations
Under the Clean Water Act Section 404 of 1972 and 33 CFR 320-330 and 40 CFR 230 moderate the destruction of wetlands by the Air Force to make way for other uses. To obtain a permit for a design or construction project which affects a wetland, the Air Force must agree to create new wetlands, or replace lost wetland acreage through wetland creation or restoration. The Air Force is interested in building 'successful' wetlands as inexpensively as possible. It has been common practice to use hydric soil, which often had to be hauled in, as the substrate at the restored …
A System Dynamics Approach To Modelling The Degradation Of Biochemical Oxygen Demand In A Constructed Wetland Receiving Stormwater Runoff, Leslie A. Mudgett
A System Dynamics Approach To Modelling The Degradation Of Biochemical Oxygen Demand In A Constructed Wetland Receiving Stormwater Runoff, Leslie A. Mudgett
Theses and Dissertations
The objective of this research was to develop a tool to aid the Air Force Environmental Manager in the identification of the design parameters of a constructed wetland system that may be optimized to provide a desired biochemical oxygen demand (BOD) removal efficiency during the treatment of Air Force stormwater runoff. The objective is achieved through the development and use of a system dynamics model which simulates the hydrological functions of a constructed wetland as well as the processes within the wetland responsible for degradation of BOD. Based on literature review, the primary mechanism responsible for the degradation of BOD …
The Effect Of Meteorological Data Averaging Times On Plume Concentrations From Explosive Ordnance Disposal Open Burning Operations, Ida L. Widmann
The Effect Of Meteorological Data Averaging Times On Plume Concentrations From Explosive Ordnance Disposal Open Burning Operations, Ida L. Widmann
Theses and Dissertations
Explosive Ordnance Disposal (EOD) Open Burning (OB) operations are performed to treat and dispose of unserviceable munitions in the Department of Defense (DOD) inventory. Air pollution modeling of OB operations is an Environmental Protection Agency requirement for permit issuance at OB sites. Specific OB regulation is still in its infancy; therefore, establishment of OB modeling techniques is still in the early stages. This thesis effort sought to develop a computer model, based upon the Gaussian Puff Equation. The model varies from standard plume modeling practices by not making the assumption that the wind direction, wind speed and turbulence are uniform …
A Comparison Of Response Surface Methodology And A One-Factor-At-A-Time Approach As Calibration Techniques For The Bioplume-Ii Simulation Model Of Contaminant Biodegradation, Benjamin Shuman
Theses and Dissertations
This thesis compared Response Surface Methodology (RSM) to the one-factor-at-a-time approach for calibrating the Bioplume-II simulation model of contaminant biodegradation. The MADE-2 data set from Columbus Air Force Base, Mississippi was used. The one-factor-at-a-time approach reduced the root-mean-squared (RMS) error for the flow to 0.921225 feet in a total of 36 runs of Bioplume-II. The RSM approach reduced the error criterion to 0.918875 in a total of 47 runs. The one-factor-at-a-time approach was unable to reduce the error below 67.1831 parts per billion (ppb) after 21 runs. The RSM approach reduced the RMS error to 67.0327 ppb after 47 runs. …
A Decision Tool To Optimally Select Pollution Prevention Projects Within A Constrained Budget, Charlotte Hudson
A Decision Tool To Optimally Select Pollution Prevention Projects Within A Constrained Budget, Charlotte Hudson
Theses and Dissertations
Pollution prevention managers need to select the best environmental projects for an installation within a constrained budget but have no standard way of selecting the optimal mix of projects. This thesis proposes a decision tool to aid decision makers in choosing this optimal mix. The model was built using decision analysis theory which provides a framework to aid the decision maker. Criteria sed in the model for selection was determined using a questionnaire sent to base-level pollution prevention managers. The model ses DPL, a software package designed to build, analyze, and conduct sensitivity analysis of decision problems to perform the …
Decision Support Model For Municipal Solid Waste Management At Department Of Defense Installations, John F. Muratore
Decision Support Model For Municipal Solid Waste Management At Department Of Defense Installations, John F. Muratore
Theses and Dissertations
This research focuses on the development of a decision support model to identify the preferred strategy for managing municipal solid waste using the principles of decision analysis theory. The model provides an effective decision making tool to evaluate and compare different municipal solid waste management strategies. The users of this model, the Environmental Manager or decision maker at a given installation, can enter installation-specific waste stream characteristics, treatment and disposal costs, and material buy-back prices to determine the expected value for various alternative strategies. The strategy having the greatest expected value is considered the preferred alternative. In calculating the expected …
Analysis Of Soil Vapor Extraction Expenses To Estimate Bioventing Expenses, Steven M. Loken
Analysis Of Soil Vapor Extraction Expenses To Estimate Bioventing Expenses, Steven M. Loken
Theses and Dissertations
An in-depth analysis of the expenses incurred with five soil venting petroleum remediation projects was accomplished. The data was obtained from receipts provided by a major United States petroleum refiner and distributor. Cost categories were designed that incorporated all costs and provided a method to analyze the data. The five cost categories used were: permits, equipment, management, utilities, and analysis. Further analysis showed trends and described the behavior of the costs related to remediation events. The relative percentile for each cost category was found to be consistent among the projects. Many costs were also found to be very linear throughout …
Use Of Respirometry To Determine The Effect Of Nutrient Enhancement On Jp-8 Biodegradability, Christian T. Totten
Use Of Respirometry To Determine The Effect Of Nutrient Enhancement On Jp-8 Biodegradability, Christian T. Totten
Theses and Dissertations
The purpose of this study was to use respirometry to measure the impact of nutrient combinations or treatments on JP - 8 biodegradation under simulated fuel spill soil conditions. The study was designed observe one soil type at a constant fuel exposure level of 1% and a constant moisture of 60% of field capacity. Three experiments conducted were of two and three factor designs with potassium nitrate and sodium phosphate addition levels serving as two factors and fuel serving as a third factor in Experiments 1 and 2. Cumulative oxygen values obtained by the respirometer were assumed to be a …
Life-Cycle Cost Analysis For Radioactive Waste Remediation Alternatives, Thomas P. White, Ronald J. Toland, Dorian Y. Buitrago
Life-Cycle Cost Analysis For Radioactive Waste Remediation Alternatives, Thomas P. White, Ronald J. Toland, Dorian Y. Buitrago
Theses and Dissertations
This research has two primary objectives. The first is to develop a generic, interactive, spreadsheet-based life-cycle cost model that uses net present value and risk analysis techniques for cost comparison. The second is to apply the model specifically to the vitrification and cementation methods of waste remediation. By using spreadsheet analysis and graphics capabilities, the model will provide direct and objective comparisons of remediation alternatives. Since vitrification is a new technology, the plant design and operations are conceptual. Therefore, computer simulation and engineering judgement are integral to the vitrification LCC estimate.
Groundwater Model Parameter Estimation Using Response Surface Methodology, Richard M. Cotman
Groundwater Model Parameter Estimation Using Response Surface Methodology, Richard M. Cotman
Theses and Dissertations
This thesis examined the use of response surface methodology (RSM) to estimate the parameters of a finite-element groundwater model. An existing two-dimensional, steady-state flow model of a fractured carbonate groundwater system in southwestern Ohio served as the calibration target data set. A Plackett-Burman screening design showed that only four of the ten hydraulic conductivity zones significantly contributed to the output of the finite-element model. Also, the effective porosity parameter did not significantly affect the model's output. Using only the four significant hydraulic conductivity parameters; four two-level, four-factor designed experiments were conducted to exploit the first-order response surface defined by a …