Engineering Commons^™

A Deep Machine Learning Approach For Predicting Freeway Work Zone Delay Using Big Data, Abdullah Shabarek

Dissertations

The introduction of deep learning and big data analytics may significantly elevate the performance of traffic speed prediction. Work zones become one of the most critical factors causing congestion impact, which reduces the mobility as well as traffic safety. A comprehensive literature review on existing work zone delay prediction models (i.e., parametric, simulation and non-parametric models) is conducted in this research. The research shows the limitations of each model. Moreover, most previous modeling approaches did not consider user delay for connected freeways when predicting traffic speed under work zone conditions. This research proposes Deep Artificial Neural Network (Deep ANN) and …

High-Speed Rail Safety Analysis Based On Dual-Weighted Complex Network, Liu Lv

Dissertations

This study uses a complex network model to analyze the causes of accidents in high-speed railway operations. By identifying the key factors that led to high-speed railway accidents, hidden safety hazards were discovered. This will help improve the operational safety of the U.S. high-speed rail line under construction.

The analysis uses the regional high-speed railway network in Guangzhou, China as a case study, including the railway (including high-speed railway) accidents that occurred in the company's jurisdiction from 2013 to 2017. With comparative analysis between general railways and high-speed railways, the changes of high-speed railway safety factors are explored. Data analysis …

Characterizing Reactive Iron Mineral Coatings And Their Roles In Natural Attenuation At A Site With Historical Contamination, Han Hua

Dissertations

Reactive iron mineral coatings in redox transition zones play an important role in contaminant attenuation. These mineral coatings include poorly crystalline to crystalline iron sulfides, carbonates, and oxyhydroxides, and are a signature of the biogeochemical processes occurring. To better understand these processes, reactive iron mineral coatings are characterized in an 18-m Anaerobic Core collected from a contaminated industrial site. This study targets redox transition zones uncovered in the core. A suite of complementary analyses is applied to distinguish the surface coating mineralogy using X-ray Diffraction, X-ray fluorescence, and field-emission scanning electron microscopy (FESEM) with energy dispersive X-ray analyzer (EDX). In …

The Stability Of Nanobubbles And Its Application In Contaminated Sediment Treatment, Shaini Dilsha Aluthgun Hewage

Dissertations

This dissertation consists of two sections. First, nanobubbles' stability and behavior are studied using experimental and theoretical approaches. Second, nanobubbles application combined with ultrasound to remediate contaminated sediments is discussed.

The stability study consists of four sections. (i). Laboratory investigation to determine bubble size distributions and zeta potentials for different gases, pH levels, temperatures, and salt conditions. (ii). A theoretical study based on the diffused double layer theory to explain nanobubbles' behavior in different NaCl concentrations. (iii). Nanobubbles' stability in electrolyte solutions under different ion valencies using deionized water, NaCl, Na₂SO₄, Na₃PO₄, …

Incident Duration Time Prediction Using A Supervised Topic Modeling Method, Jihyun Park

Theses

Precisely predicting the duration time of an incident is one of the most prominent components to implement proactive management strategies for traffic congestions caused by an incident. This thesis presents a novel method to predict incident duration time in a timely manner by using an emerging supervised topic modeling method. Based on Natural Language Processing (NLP) techniques, this thesis performs semantic text analyses with text-based incident dataset to train the model. The model is trained with actual 1,466 incident records collected by Korea Expressway Corporation from 2016-2019 by applying a Labeled Latent Dirichlet Allocation(L-LDA) approach. For the training, this thesis …

Development And Evaluation Of Low Cost 2-D Lidar Based Traffic Data Collection Methods, Ravi Jagirdar

Dissertations

Traffic data collection is one of the essential components of a transportation planning exercise. Granular traffic data such as volume count, vehicle classification, speed measurement, and occupancy, allows managing transportation systems more effectively. For effective traffic operation and management, authorities require deploying many sensors across the network. Moreover, the ascending efforts to achieve smart transportation aspects put immense pressure on planning authorities to deploy more sensors to cover an extensive network. This research focuses on the development and evaluation of inexpensive data collection methodology by using two-dimensional (2-D) Light Detection and Ranging (LiDAR) technology. LiDAR is adopted since it is …

Computational Modeling Of Recycled Aggregate Concrete Systems, Anuruddha Jayasuriya

Dissertations

Using recycled concrete aggregates (RCA) as a substitution in concrete materials is an excellent way to improve the sustainability of concrete production. However, due to a lack of globally accepted technical guidance, and high material variability, the usage of recycled aggregate concrete (RAC) systems is not readily practiced within most structural engineering applications.

To date, the majority of the experimental findings in the literature indicate that RAC is a weaker composite material when compared to a natural aggregate concrete system in terms of mechanical properties such as compressive strength, elastic modulus, tensile strength, flexural strength, fracture energy, and toughness. However, …

Compound Flooding In Coastal Areas Emanating From Inland And Offshore Events, Hamed Behzad Koochaksaraii

Dissertations

The vulnerability of urban populations to natural hazards and climate change is a major theme in many reports on coastal cities with flooding ranking highly among the climate change concerns. Flooding could occur as a result of runoff for inland rainfall that accumulates at the mouth of the estuary to the sea or it could occur due to a storm surge emanating from the ocean. The techniques for modeling the flooding from these events are very different, as they were developed in different scientific fields: hydrology and hydraulic engineering for inland rainfall versus coastal oceanography and coastal engineering for offshore …

Stress-State And Injection-Rate Dependent Damage Processes During The Hydraulic Fracturing Of Granite, Gayani Sasendrika Gunarathna

Dissertations

Hydraulic fracturing is a well-stimulation technique that is employed in field applications, such as enhanced geothermal systems (EGS) and shale oil/gas extraction. This research experimentally investigates the effect of the state of stress and injection rate on the hydraulic fracturing processes. In addition, a displacement discontinuity method (DDM) code, FROCK, is used to model the crack initiation and propagation in a granite specimen under hydraulic fracturing conditions. In order to conduct the experimental work, a test setup capable of applying a triaxial state of stress and water pressure inside pre-fabricated flaws cut in prismatic granite specimens is developed. Additionally, the …

Numerical And Analytical Methods To Predict Behavior Of Reinforced Ductile Concrete Composites, Mandeep Pokhrel

Dissertations

Structural components constructed with ductile concrete composites, such as high-performance fiber-reinforced cementitious composites (HPFRCC), are known to perform exceptionally well under extreme mechanical and environmental loading conditions compared to traditional concrete. HPFRCC flexural components exhibit enhanced performance in terms of displacement ductility, energy dissipation capacity, and damage tolerance capacity. However, recent research suggests that the flexural behavior of reinforced HPFRCCs in terms of crack progression, reinforcement plasticity, and failure mechanism is significantly different than conventional reinforced concrete. Specifically, the failure mode of flexural members is found to be predominantly through the fracture of longitudinal reinforcement rather than compression crushing of …

The Impact Of Conversion On The Durability Of Calcium Aluminate Cement Concrete Systems, Marwa Mohsen Korayem

Dissertations

The deterioration of infrastructure in North America has resulted in a significant need for concrete repair materials that can be used to maintain service life of these structures. Hydraulic cement based rapid repair materials can be used to repair pavement and bridge deterioration with minimal impact on economic activities such as freight handling or public transportation. While there are many options for use in repair situations, calcium aluminate cements have become more popular recently, particularly in situations where repairs must be completed rapidly.

Calcium aluminate cement (CAC) is a cement characterized by its rapid strength gain, even at low temperatures …

Recovery Of Valuable Metals From Spent Lithium-Ion Batteries Using Organic Acids: Assessment Of Technoeconomic Feasibility, Leqi Lin

Theses

Lithium ion batteries (LIBs) are used in diverse electronic products with anticipated over 500 thousand tonnes of the waste LIBs globally in 2020. To protect the environment and also recover valuable materials such as lithium (Li) and cobalt (Co), our research employed a hydrometallurgy method and demonstrated that exposure of spent LIBs to Organic Aqua Regia (OAR) could leach Li and Co without the pre-separation of cathode from Al foil using organic solvents such as Dimethylformamide (DMF) and N-Methyl-2-pyrrolidone (NMP). The leaching efficiency of 99% and 94% for Li and Co were obtained with a leaching rate of 0.021, 0.167 …

Enhanced Removal Of Perfluorooctanoic Acid (Pfoa) Via Microwave-Fenton-Reactive Membrane Filtration, Fangzhou Liu

Theses

Perfluorooctanoic Acid (PFOA), one of the common per- and poly fluorinated alkylated substances (PFASs), is increasingly detected in the environment due to the diverse industrial applications and high resistance to degradation processes. This study evaluated degradation of PFOA in microwave-assistant catalytic membrane filtration, a process that integrates microwave catalytic reactions into a ceramic membrane filtration. First, water permeation of the pristine and catalyst-coated membranes were examined under the influence of microwave irradiation to analyse the impacts of the coating layer and water temperature increase on permeate flux, which were well interpreted by three models. Then, the PFOA removal was first …

Mech 236-002: Engineering Mechanics: Dynamics, Rajib Moral

Civil and Environmental Engineering Syllabi

No abstract provided.

Ce 432-102: Structural Steel Design, Raj Navalurkar

Civil and Environmental Engineering Syllabi

No abstract provided.

Mech 236-004: Engineering Mechanics: Dynamics, Rajib Moral

Civil and Environmental Engineering Syllabi

No abstract provided.