Engineering Commons^™

Integrated Sensor Network For Monitoring Steel Corrosion In Concrete Structures, José Enrique Ramón-Zamora, José Manuel Gandia-Romero, Román Bataller, Ana Martínez-Ibernón, Isabel Gasch, Juan Soto

International Conference on Durability of Concrete Structures

The developed Integrated Sensor Network (ISN) allows a non-destructive monitoring of the rebar condition at different parts of the structure. The corrosion sensor allows the accurate determination of the corrosion rate (µm/year). Moreover, additional sensors are integrated in order to detect relevant changes in the concrete electrochemical condition.

The ISN has been published as an international invention patent (reference number WO 2016/177929 A1). The system is based on an economic, simple, reliable and durable technology, which makes its implementation viable on new and repaired reinforced concrete structures (RCS). Therefore, it is also possible monitoring non-accessible parts such as deep foundations …

Micro-Mechanical Analysis Of Corrosion Products Formed During Long-Term Carbonation Induced Corrosion Of Steel, Marijana Serdar, Dubravka Bjegovic, Valérie L’Hostis, Stéphane Poyet, Damien Féron

International Conference on Durability of Concrete Structures

During corrosion distinct types of corrosion products form, composed of different ratios of ferrous ions and oxide, hydroxides. Corrosion products have different physical and mechanical properties, mainly density, resistivity, volume and modulus of elasticity compared to iron. Knowing properties of corrosion products is indispensable for service life modelling of structures and can give valuable insight into the long-term corrosion propagation process. In this study micro-indentation method was used to evaluate mechanical properties of different layers formed during long-term carbonation induced corrosion of steel in concrete. Investigation was performed on three sets of reinforced concrete samples, that underwent corrosion during 50, …

Comparison Data Between Hybrid And Galvanic Anode Installation In The Arousa Island Bridge, José Antonio Becerra Mosquera, Diego Carro López, José Enrique Pardo Landrove, José Manuel Millán Pérez

International Conference on Durability of Concrete Structures

The Arousa Island Bridge, with its 1980 m is the only road access to the Arousa Island. Built in 1985, this single-cell box girder divided in 40 spans runs entirely on the sea. The deck is between 2 to 12 m above sea level, so after 25 years in a marine environment, the structure showed reinforcement corrosion, especially in piles and deck bottom. Attending to the corrosion damages, caused simply from a chloride attack, the local government decided to intervene with an ambitious repair project. This decision has been taken only after an exhaustive cost analysis to determine the feasibility …

Effect Of Time-Dependent Chloride Profile And Temperature Variation On Chloride Diffusion In Concrete, Feras Alsheet, A. Ghani Razaqpur

International Conference on Durability of Concrete Structures

Reinforcement corrosion due to chlorides diffusion is one of the main problems in reinforced concrete structures exposed to certain environments. The diffusion rate is function of chloride surface concentration, concrete temperature, humidity, composition and microstructure. The intruded chlorides are partially chemically bound by the concrete and it is the unbound or free chloride which upon exceeding a defined threshold initiates corrosion. The time to corrosion initiation depends on the above variables; therefore, it is important to model their spatial and temporal variations in a manner that will yield a realistic estimate of the actual initiation period. In this study, the …

Durability Design Of Segmental Linings For Intended Service Life Of Tunnels, Mehdi Bakhshi, Verya Nasri

International Conference on Durability of Concrete Structures

In one-pass lining systems, the durability of tunnel structure is directly related to durability of concrete segments acting as both the initial support and the tunnel final lining. In this paper, most-frequent degradation mechanisms of concrete linings are discussed including chloride- and carbonation- induced corrosions, sulfate, acid and freeze-and-thaw attacks, and alkali-aggregate reactions. Mitigation method for each specific degradation mechanism is explained. A durability factor specific to railway and subway tunnel known as stray current corrosion is presented. Mitigation methods for this specific corrosion together with coupling effects with other conventional damage mechanisms are explained. Prescriptive approaches for durability design …

Sustainable Concrete With Seawater And Corrosion Resistant Reinforcement: Results Of Monitoring Of Corrosion Behaviour, Elena Redaelli, Maddalena Carsana, Federica Lollini, Matteo Gastaldi, Forood Torabian Isfahani

International Conference on Durability of Concrete Structures

The use of seawater for mixing concrete for reinforced concrete structures is prohibited, since it can promote steel corrosion. However, the use of seawater would contribute to decrease the environmental impact of concrete, in particular in those regions of the world where potable water is a precious resource. The project SEACON-INFRAVATION between University of Miami and Politecnico di Milano, with various industrial partners, aims at investigating the use of seawater for the construction of sustainable and durable reinforced concrete structures and infrastructures. Within the project, that included a vast campaign of laboratory tests, also two demo projects – one in …

Probability Model Of Corrosion-Induced Cracking Time In Chloride-Contaminated Reinforced Concrete, Chunhua Lu, Jinmu Yang, Ronggui Liu

International Conference on Durability of Concrete Structures

Corrosion-induced concrete cover cracking caused by chloride ion is an important indication of durability limit state for marine reinforced concrete (RC) structures and can ultimately determine the structural service life. In this paper, considering the random nature of factors affecting the corrosion cracking process, a probabilistic model which expands on the deterministic model of cover cracking time is developed by using Monte Carlo simulation technique. The results showed that the time to corrosion cracking can be modelled by the Weibull distribution. Finally, the probabilistic analysis for the cracking time is applied to an in-site RC bridge girder with four different …

An Experimental Study On Effect Of Steel Corrosion On The Bond–Slip Performance Of Reinforced Concrete, Xiaolin Zhang, Xuebing Liang, Hancheng Huang, Haijun Zhou

International Conference on Durability of Concrete Structures

This paper studied the effects of reinforcement corrosion on bond performance between rebar and concrete. Tests were carried out to evaluate the degradation of bond between reinforcing steel and concrete for different corrosion levels of reinforcing steel. A series of 20 specimens of different concrete strength with various reinforcing steel corrosion levels were designed and manufactured. Each specimen was casted as a 200-mm concrete cube, and a steel rebar was centrally embedded with two stirrups around it. The steel rebar were corroded using an electrochemical accelerated corrosion technique. The corrosion crack opening width and length were recorded after the corrosion …

Progress In Durability Study Of Frp Materials, Zeng-Zhu Zhu, Ying-Wu Zhou, Li-Li Sui, Feng Xing, Jia Du

International Conference on Durability of Concrete Structures

During the past decades, FRP strengthened RC structures have attracted worldwide interest in both application and research. Nowadays, as more and more infrastructures are being suffered from severe corrosions due to harsh and extreme environments, the durability of FRP strengthened RC structures has generally emerged as the most important issue in research. Thus, the paper presents the latest progress in durability study of the FRP materials through an in-depth review and analysis on existing extensive investigations. The time-dependent performances of two types of FRP materials of carbon FRP (CFRP) and glass FRP (GFRP) under severe environments of humidity, high temperature, …

Effect Of Pet Wrapping On Shear Performance Of Corroded Reinforced Concrete Columns, Dawei Zhang, Yuxi Zhao, Weiliang Jin, Tamon Ueda

International Conference on Durability of Concrete Structures

In this paper, an experimental study is presented on the influence of PET warping on shear performance, such as diagonal shear cracking load, peak load, and energy dissipation of RC columns with stirrup corrosion before strengthening. The experimental program involved an electrochemical process to accelerate the migration of chlorides from an external electrolyte into the tested columns, a wetting–drying cycle process with a controlled current to speed up the corrosion of the stirrup in the tested columns, the strengthening of corroded columns with PET warping, and a pseudostatic test to determine the shear capacity of the tested beams. The shear …