Engineering Commons^™

Effect Of Steel Fiber On The Mechanical Properties Of Oil Palm Shell Lightweight Concrete, Hilmi Mahmud

Hilmi Mahmud

This paper reports the results of a study conducted to investigate the effect of low volume content of steel fiber on the slump, density, compressive strength under different curing conditions, splitting tensile strength, flexural strength and modulus of elasticity of a grade 35 oil palm shell (OPS) lightweight concrete mixture. The results indicate that an increase in steel fiber decreased the workability and increased the density. All the mechanical properties except the modulus of elasticity (E) improved significantly. The 28. day compressive strength of steel fiber OPS lightweight concrete in continuously moist curing was in the range of 41-45. MPa. …

Oil Palm Shell As A Lightweight Aggregate For Production High Strength Lightweight Concrete, Hilmi Mahmud

Hilmi Mahmud

In Malaysia, oil palm shell (OPS) is an agricultural solid waste originating from the palm oil industry. In this investigation old OPS was used for production of high strength lightweight concrete (HSLC). The density, air content, workability, cube compressive strength and water absorption were measured. The effect of five types of curing conditions on 28-day compressive strength was studied. The test results showed that by incorporating limestone powder and without it, it is possible to produce the OPS concretes with 28-day compressive strength of about 43-48 MPa and dry density of about 1870-1990 kg/m3. The compressive strength of OPS HSLC …

Seismic Characterization Of Recycled Aggregate Concrete, Amin Jamali

Dissertations

There are significant environmental benefits of recycling waste concrete and reusing it as aggregate for structural concrete, but the use of Recycled Aggregate Concrete (RAC) is yet limited to non-structural applications such as road sub-base. Widespread application of RAC in areas such as seismic design requires an improved knowledge of RAC behavior under multiaxial state of stresses.

The main objective of this research is the characterization of seismic properties of RAC by developing a stress-strain model which can reasonably describe the behavior under both unconfined and confined conditions. An extensive experimental program, including testing of several plain RAC cylinders as …

High-Strength Rice Husk Ash Concrete Incorporating Quarry Dust As A Partial Substitute For Sand, Hilmi Mahmud

Hilmi Mahmud

Quarry dust is a by-product from the granite crushing process in quarrying activities. This paper presents the findings from experimental work undertaken to evaluate the suitability of quarry dust as a partial substitute for sand in high-strength concrete (HSC) containing rice husk ash (RHA). Two grades of HSC mixes, to achieve 60 MPa and 70 MPa at 28 days, were designed with and without the incorporation of RHA. Quarry dust was then used in the mixes containing RHA as a partial substitute for sand, in quantities ranging from 10% to 40%. The slump of the fresh concrete and the compressive …