Engineering Commons^™

Surface Modified Hybrid Znsno3 Nanocubes For Enhanced Piezoelectric Power Generation And Wireless Sensory Application, Sk Md Ali Zaker Shawon, Zaida D. Carballo, Valeria Suarez Vega, Chen Lin, Muhammad Sufian Rafaqut, Andrew Xu Sun, James Li, Mohammed Jasim Uddin

Chemistry Faculty Publications and Presentations

Piezoelectric Nanogenerators (PENGs), which can convert ambient mechanical stimuli into electrical energy, are held in high regard due to their cost-effectiveness, energy harvesting applications, and potential as self-powered sensors. We report an aluminum-doped zinc stannate (ZnSnO3) PENG that can achieve high electrical outputs with respect to the external force. In order to enrich the piezoelectric mechanics, a low-temperature solution method was adopted in our work to synthesize ZnSnO3 nanocubes with an average side length of only 30 – 55 nm. Furthermore, ZnSnO3 was doped with 1 wt% to 5 wt% of aluminum nanoparticles. We report that 2 wt% of aluminum …

Piezoelectric Signals In Vascularized Bone Regeneration, Delfo D’Alessandro, Claudio Ricci, Mario Milazzo, Giovanna Strangis, Francesca Forli, Gabriele Buda, Mario Petrini, Stefano Berrettini, M. Jasim Uddin, Serena Danti, Paolo Parchi

Chemistry Faculty Publications and Presentations

The demand for bone substitutes is increasing in Western countries. Bone graft substitutes aim to provide reconstructive surgeons with off-the-shelf alternatives to the natural bone taken from humans or animal species. Under the tissue engineering paradigm, biomaterial scaffolds can be designed by incorporating bone stem cells to decrease the disadvantages of traditional tissue grafts. However, the effective clinical application of tissue-engineered bone is limited by insufficient neovascularization. As bone is a highly vascularized tissue, new strategies to promote both osteogenesis and vasculogenesis within the scaffolds need to be considered for a successful regeneration. It has been demonstrated that bone and …

Knn Based Piezo-Triboelectric Lead-Free Hybrid Energy Films, Abu Masa Abdullah, Muhtasim Ul Karim Sadaf, Farzana Tasnim, Horacio Vasquez, Karen Lozano, M. Jasim Uddin

Chemistry Faculty Publications and Presentations

In recent times, the triboelectric and piezoelectric effects have garnered significant attention towards developing advanced material composites for energy harvesting and sensory applications. In this work, potassium sodium niobate (KNN) based energy films (EF) have been developed to utilize mechanical energy while simultaneously taking advantage of triboelectric and piezoelectric mechanisms. The KNN particles were synthesized using a wet ball milling technique and then incorporated into a polyvinylidene difluoride (PVDF) matrix together with addition of multi wall carbon nanotubes (MWCNT). The film was used to develop a piezoelectric nanogenerator (PENG) fitted with copper electrodes. The piezoelectric output of the film was …

Polymer Based Triboelectric Nanogenerator For Cost‐Effective Green Energy Generation And Implementation Of Surface‐Charge Engineering, Diana Lopez, Aminur Rashid Chowdhury, Abu Masa Abdullah, Muhtasim Ul Karim Sadaf, Isaac Martinez, Brishty Deb Chowdhury, Serena Danti, Christopher J. Ellison, Karen Lozano, Mohammed Jasim Uddin

Chemistry Faculty Publications and Presentations

Performance of triboelectric nanogenerators for harvesting mechanical energy from the ambient environment has been limited by structural complexity, cost-effectiveness, and mechanical weakness of materials. Herein, a cost-effective vertical contact separation mode triboelectric nanogenerator using polyethylene (PE) and polycarbonate (PC) in a regular digital versatile disc is reported. This cost-effective nanogenerator with simplified structures is able to generate an open-circuit voltage of 215.3 V and short-circuit current of 80 μA. The effects of the distance of impact and the air gap between the triboelectric layers have also been tested from 3 to 9 cm, and 0.25 to 1 cm, respectively. It …

Editorial: Carbon- And Inorganic-Based Nanostructures For Energy Applications, Federico Cesano, M. Jasim Uddin, Yuanbing Mao, Muhammad N. Huda

Chemistry Faculty Publications and Presentations

No abstract provided.

Synthesis And Fabrication Of Self-Sustainable Triboelectric Energy Case For Powering Smart Electronic Devices, Abu Masa Abdullah, Alejandro Flores, Aminur Rashid Chowdhury, Jianzhi Li, Yuanbing Mao, M. Jasim Uddin

Chemistry Faculty Publications and Presentations

In recent times, Triboelectric Nanogenerators (TENG) have attained the focus of the scientific community due to its potential as a medium to harvest mechanical energy from the ambient environment. Human motion has been attributed as a source of mechanical energy to drive electronic devices and sensors through TENG. Based on the principles of single electrode TENG, we have developed a Triboelectricity based Stepping and Tapping Energy Case (TESTEC) which magnifies the prospect to power touch electronic devices by utilizing finger tapping and stepping motion. This novel case was constructed with two single electrode TENG operating through the triboelectric mechanism between …

The Role Of Α, Γ, And Metastable Polymorphs On Electrospun Polyamide 6/Functionalized Graphene Oxide, Javier Macossay-Torres, Yazmin I. Avila-Vega, Faheem A. Sheikh, Travis Cantu, Francisco E. Longoria-Rodriguez, Edgar H. Ramirez-Soria, Rigoberto C. Advincula, Jose Bonilla-Cruz

Chemistry Faculty Publications and Presentations

The present paper describes the addition of nitroxide-functionalized graphene oxide (GOFT) into polyamide 6 (PA6) micro- and nanofibers, which were obtained through electrospinning. SEM micrographs demonstrated the presence of fibers. Tensile testing presented an unexpected and non-obvious behavior, in which the Young’s modulus, tensile strength, and elongation simultaneously and remarkably increased compared to the pristine polymer nanofibers. GOFT induces the hydrogen bonding between the NH group from PA6 with the functional groups, thus promoting higher crystallinity of the polymer matrix. Nonetheless, deconvoluted DSC curves revealed the presence of two quasi-steady polymorphous (b and d phases) contributing to 46% of the …

Novel Silica Filled Deep Eutectic Solvent Based Nanofluids For Energy Transportation, Changhui Liu, Hui Fang, Xinjian Liu, Ben Xu, Zhonghao Rao

Chemistry Faculty Publications and Presentations

Liquid range of nanofluids is a crucial parameter as it intensively determines their application temperature scope. Meanwhile, improved thermal conductivity and stability are of great significances and comprise the main fundamental research topics of nanofluids. In this work, 2- butoxy-3,4-dihydropyran (DP), produced from a convenient one-pot three-component reaction in water, was employed as dual lipophilic brusher and metal nanoparticle anchor. It was found that DP was able to enhance the dispersing ability and thermal conductivity of SiO2 nanoparticle filled deep eutectic solvent (DES) based nanofluids simultaneously. The key to the success of this protocol mainly relies on the electrophilic property …

Spatial Fingerprinting Of Biogenic And Anthropogenic Volatile Organic Compounds In An Arid Unsaturated Zone, Christopher T. Green, Wentai Luo, Christopher H. Conaway, Karl B. Haase, Ronald J. Baker

Chemistry Faculty Publications and Presentations

Subsurface volatile organic compounds (VOCs) can pose risks to human and environmental health and mediate biological processes. Volatile organic compounds have both anthropogenic and biogenic origins, but the relative importance of these sources has not been explored in subsurface environments. This study synthesized 17 yr of VOC data from the Amargosa Desert Research Site in Nevada with the goal of improving understanding of spatial and temporal variations that distinguish sources of VOCs from a landfill and from ambient sources including biogenic VOCs (bVOCs). Gas samples were collected from 1999 to 2016 from an array of shallow sample points (0.5- and …

Flavour Chemicals In A Sample Of Non-Cigarette Tobacco Products Without Explicit Flavour Names Sold In New York City In 2015, Shannon M. Farley, Kevin R.J. Schroth, Victoria Grimshaw, Wentai Luo, Julia Lynn Degagne, Peyton A. Tierney, Kilsun Kim, James F. Pankow

Chemistry Faculty Publications and Presentations

Background Youth who experiment with tobacco often start with flavoured products. In New York City (NYC), local law restricts sales of all tobacco products with ‘characterising flavours’ except for ‘tobacco, menthol, mint and wintergreen’. Enforcement is based on packaging: explicit use of a flavour name (eg, ‘strawberry’) or image depicting a flavour (eg, a fruit) is presumptive evidence that a product is flavoured and therefore prohibited. However, a tobacco product may contain significant levels of added flavour chemicals even when the label does not explicitly use a flavour name.

Methods Sixteen tobacco products were purchased within NYC in 2015 that …

Benzene Formation In Electronic Cigarettes, James F. Pankow, Kilsun Kim, Kevin J. Mcwhirter, Wentai Luo, Jorge O. Escobedo, Robert M. Strongin, Anna K. Duell, David H. Peyton

Chemistry Faculty Publications and Presentations

The heating of the fluids used in electronic cigarettes (“e-cigarettes”) used to create “vaping” aerosols is capable of causing a wide range of degradation reaction products. We investigated formation of benzene (an important human carcinogen) from e-cigarette fluids containing propylene glycol (PG), glycerol (GL), benzoic acid, the flavor chemical benzaldehyde, and nicotine.

Forcespinning: A New Method For The Mass Production Of Sn/C Composite Nanofiber Anodes For Lithium Ion Batteries, Victor Agubra, Luis Zuniga, David De La Garza, Luis Gallegos, Madhab Pokhrel, Mataz Alcoutlabi

Chemistry Faculty Publications and Presentations

The development of nanostructured anode materials for rechargeable Lithium-ion Batteries has seen a growing interest. We herein report the use of a new scalable technique, Forcespinning (FS) to produce binder-free porous Sn/C composite nanofibers with different Sn particle size loading. The preparation process involves the FS of Sn/PAN precursor nanofibers and subsequently stabilizing in air at 280 °C followed by carbonization at 800 °C under an inert atmosphere. The Sn/C composite nanofibers are highly flexible and were directly used as binder-free anodes for lithium-ion batteries. The produced Sn/C composite nanofibers showed an improved discharge capacity of about 724 mA …

A Comparative Study Of Polyurethane Nanofibers With Different Patterns And Its Analogous Nanofibers Containing Mwcnts, Javier Macossay-Torres, Faheem A. Sheikh, Hassan Ahmad, Hern Kim, Gary L. Bowlin

Chemistry Faculty Publications and Presentations

Tissue engineering is a multidisciplinary field that has evolved in various dimensions in recent years. One of the main aspects in this field is the proper adjustment and final compatibility of implants at the target site of surgery. For this purpose, it is desired to have the materials fabricated at the nanometer scale, since these dimensions will ultimately accelerate the fixation of implants at the cellular level. In this study, electrospun polyurethane nanofibers and their analogous nanofibers containing MWCNTs are introduced for tissue engineering applications. Since MWCNTs agglomerate to form bundles, a high intensity sonication procedure was used to disperse …

Molecular View Modeling Of Atmospheric Organic Particulate Matter: Incorporating Molecular Structure And Co-Condensation Of Water, James F. Pankow, Marguerite Colasurdo Marks, Kelley C. Barsanti, Abdullah Mahmud, William E. Asher, Jingyi Li, Qi Ying, Shantanu H. Jathar, Michael J. Kleeman

Chemistry Faculty Publications and Presentations

Most urban and regional models used to predict levels of organic particulate matter (OPM) are based on fundamental equations for gas/particle partitioning, but make the highly simplifying, anonymized-view (AV) assumptions that OPM levels are not affected by either: a) the molecular. characteristics of the condensing organic compounds (other than simple volatility); or b) co-condensation of water as driven by non-zero relative humidity (RH) values. The simplifying assumptions have allowed parameterized chamber results for formation of secondary organic aerosol (SOA) (e.g., “two-product” (2p) coefficients) to be incorporated in chemical transport models. However, a return towards a less simplistic (and more computationally …

Tio 2 Fibers: Tunable Polymorphic Phase Transformation And Electrochemical Properties, Edna Garcia, Qiang Li, Xing Sun, Karen Lozano, Yuanbing Mao

Chemistry Faculty Publications and Presentations

A series of one-dimensional (1D) nanoparticle-assembled TiO2 fibers with tunable polymorphs were prepared via a novel and large scale ForceSpinning® process of titanium tetraisopropoxide (TTIP)/polyvinylpyrrolidone (PVP) precursor fibers followed with a thermal treatment at various calcinations temperatures. The thermal and structural transformations were characterized by thermogravimetric analysis/differential scanning calorimetry, scanning electron microscopy, and X-ray diffraction. The influence of polymorphic phase of the TiO2 fibers on the electrochemical performance in neutral aqueous 1 M Na2SO4 electrolyte was investigated. The polymorphic amorphous/anatase/rutile TiO2 fibers prepared at 450 °C achieved a highest capacitance of 21.2 F g−1 (6.61 mF cm−2) at a current …

Flavour Chemicals In Electronic Cigarette Fluids, Peyton A. Tierney, Clarissa D. Karpinski, Jessica E. Brown, Wentai Luo, James F. Pankow

Chemistry Faculty Publications and Presentations

Background: Most e-cigarette liquids contain flavour chemicals. Flavour chemicals certified as safe for ingestion by the Flavor Extracts Manufacturers Association may not be safe for use in e-cigarettes. This study identified and measured flavour chemicals in 30 e-cigarette fluids.

Methods: Two brands of single-use e-cigarettes were selected and their fluids in multiple flavour types analysed by gas chromatography/mass spectrometry. For the same flavour types, and for selected confectionary flavours (eg, bubble gum and cotton candy), also analysed were convenience samples of e-cigarette fluids in refill bottles from local ‘vape’ shops and online retailers.

Results: In many liquids, total flavour chemicals …

Aerosol Optical Hygroscopicity Measurements During The 2010 Cares Campaign, Dean B. Atkinson, James Gregory Radney, Janel Lum, Katheryn R. Kolesar, Daniel J. Cziczo, Mikhail Pekour, Qi Zhang, Ari Setyan, Alla Zelenyuk, Christopher D. Cappa

Chemistry Faculty Publications and Presentations

Measurements of the effect of water uptake on particulate light extinction or scattering made at two locations during the 2010 CARES study around Sacramento, CA are reported. The observed influence of water uptake, characterized through the dimensionless optical hygroscopicity parameter γ, is compared with calculations constrained by observed particle size distributions and size-dependent particle composition. A closure assessment has been carried out that allowed for determination of the average hygroscopic growth factors (GF) at 85% relative humidity and the dimensionless hygroscopicity parameter κ for oxygenated organic aerosol (OA) and for supermicron particles, yielding κ = 0.1–0.15 and 0.9–1.0, respectively. The …

Imaging, Spectroscopy, Mechanical, Alignment And Biocompatibility Studies Of Electrospun Medical Grade Polyurethane (Carbothane™ 3575a) Nanofibers And Composite Nanofibers Containing Multiwalled Carbon Nanotubes, Faheem A. Sheikh, Javier Macossay-Torres, Travis Cantu, Xujun Zhang, M. Shamshi Hassan, M. Esther Salinas, Chakavak S. Farhangi, Hassan Ahmad, Hern Kim, Gary L. Bowlin

Chemistry Faculty Publications and Presentations

In the present study, we discuss the electrospinning of medical grade polyurethane (Carbothane™ 3575A) nanofibers containing multi-walled-carbon-nanotubes (MWCNTs). A simple method that does not depend on additional foreign chemicals has been employed to disperse MWCNTs through high intensity sonication. Typically, a polymer solution consisting of polymer/MWCNTs has been electrospun to form nanofibers. Physiochemical aspects of prepared nanofibers were evaluated by SEM, TEM, FT-IR and Raman spectroscopy, confirming nanofibers containing MWCNTs. The biocompatibility and cell attachment of the produced nanofiber mats were investigated while culturing them in the presence of NIH 3T3 fibroblasts. The results from these tests indicated non-toxic behavior …

Imaging, Spectroscopic, Mechanical And Biocompatibility Studies Of Electrospun Tecoflex® Eg 80a Nanofibers And Composites Thereof Containing Multiwalled Carbon Nanotubes, Javier Macossay-Torres, Faheem A. Sheikh, Travis Cantu, Thomas Eubanks, M. Esther Salinas, Chakavak S. Farhangi, Hassan Ahmad, M. Shamshi Hassan, Myung-Seob Khil, Shivani K. Maffi, Hern Kim, Gary L. Bowlin

Chemistry Faculty Publications and Presentations

The present study discusses the design, development and characterization of electrospun Tecoflex® EG 80A class of polyurethane nanofibers and the incorporation of multiwalled carbon nanotubes (MWCNTs) to these materials. Scanning electron microscopy results confirmed the presence of polymer nanofibers, which showed a decrease in fiber diameter at 0.5% wt. and 1% wt. MWCNTs loadings, while transmission electron microscopy showed evidence of the MWCNTs embedded within the polymer matrix. The fourier transform infrared spectroscopy and Raman spectroscopy were used to elucidate the polymer-MWCNTs intermolecular interactions, indicating that the C-N and N-H bonds in polyurethanes are responsible for the interactions with MWCNTs. …

Biodegradable Electrospun Nanofibers Coated With Platelet-Rich Plasma For Cell Adhesion And Proliferation, Luis Diaz-Gomez, Carmen Alvarez-Lorenzo, Angel Concheiro, Maite Silva, Fernando Dominguez, Faheem A. Sheikh, Travis Cantu, Raj Desai, Vanessa L. Garcia, Javier Macossay-Torres

Chemistry Faculty Publications and Presentations

Biodegradable electrospun poly(ε-caprolactone) (PCL) scaffolds were coated with platelet-rich plasma (PRP) to improve cell adhesion and proliferation. PRP was obtained from human buffy coat, and tested on human adipose-derived mesenchymal stem cells (MSC) to confirm cell proliferation and cytocompatibility. Then, PRP was adsorbed on the PCL scaffolds via lyophilization, which resulted in uniform sponge-like coating of 2.85 (s.d. 0.14) mg/mg. The scaffolds were evaluated regarding mechanical properties (Young’s modulus, tensile stress and tensile strain), sustained release of total protein and growth factors (PDGF-BB, TGF-β1 and VEGF), and hemocompatibility. MSC seeded on the PRP-PCL nanofibers showed an increased adhesion and proliferation …

Nitroxide-Functionalized Graphene Oxide From Graphite Oxide, Yazmin I. Avila-Vega, Cesar C. Leyva-Porras, Marcela Mireles, Manuel Quevedo-Lopez, Javier Macossay-Torres, Jose Bonilla-Cruz

Chemistry Faculty Publications and Presentations

A facile method for preparing functionalized graphene oxide single layers with nitroxide groups is reported herein. Highly oxidized graphite oxide (GO=90.6%) was obtained, slightly modifying an improved Hummer’s method. Oxoammonium salts (OS) were investigated to introduce nitroxide groups to GO, resulting in a one-step functionalization and exfoliation. The mechanisms of functionalization/exfoliation are proposed, where the oxidation of aromatic alcohols to ketone groups, and the formation of alkoxyamine species are suggested. Two kinds of functionalized graphene oxide layers (GOFT1 and GOFT2) were obtained by controlling the amount of OS added. GOFT1 and GOFT2 exhibited a high interlayer spacing (d0001 = 1.12nm), …

Picture Of A Chelate In Exchange: The Crystal Structure Of Nahodotma, A 'Semi'-Hydrated Chelate, Katherine M. Payne, Edward J. Valente, Silvio Aime, Mauro Botta, Mark Woods

Chemistry Faculty Publications and Presentations

Crystallography generally only provides static structural information. This can render it an ineffective technique for probing dynamic solution state processes. A crystal of HoDOTMA affords unique structures that effectively represent that of a lanthanide tetra-acetate chelate mid-way through the water exchange process.

Evolution Of Multispectral Aerosol Optical Properties In A Biogenically-Influenced Urban Environment During The Cares Campaign, Madhu Gyawali, W. Patrick Arnott, Rahul A. Zaveri, C. Song, Mikhail Pekour, B. Flowers, Manvendra K. Dubey, Ari Setyan, Qi Zhang, Joseph Harworth, James Gregory Radney, Dean B. Atkinson, S. China, Claudio Mazzoleni, Kyle Gorkowski, R. Subramanian, B. Tom Jobson, Hans Moosmüller

Chemistry Faculty Publications and Presentations

Ground-based aerosol measurements made in June 2010 within Sacramento urban area (site T0) and at a 40-km downwind location (site T1) in the forested Sierra Nevada foothills area are used to investigate the evolution of multispectral optical properties as the urban aerosols aged and interacted with biogenic emissions. Along with black carbon and non-refractory aerosol mass and composition observations, spectral absorption (ᵝabs), scattering (ᵝsca), and extinction (ᵝext) coefficients for wavelengths ranging from 355 to 1064nm were measured at both sites using photoacoustic (PA) instruments with integrating nephelometers and using cavity ring-down (CRD) instruments. The …

A Simple Approach For Synthesis, Characterization And Bioactivity Of Bovine Bones To Fabricate The Polyurethane Nanofiber Containing Hydroxyapatite Nanoparticles, Faheem A. Sheikh, M. A. Kanjwal, Javier Macossay-Torres, N. A. M. Barakat, H. Y. Kim

Chemistry Faculty Publications and Presentations

In the present study, we had introduced polyurethane (PU) nanofibers that contain hydroxyapatite (HAp) nanoparticles (NPs) as a result of an electrospinning process. A simple method that does not depend on additional foreign chemicals had been employed to synthesize HAp NPs through the calcination of bovine bones. Typically, a colloidal gel consisting of HAp/PU had been electrospun to form nanofibers. In this communication, physiochemical aspects of prepared nanofibers were characterized by FE-SEM, TEM and TEM-EDS, which confirmed that nanofibers were well-oriented and good dispersion of HAp NPs, over the prepared nanofibers. Parameters, affecting the utilization of the prepared nanofibers in …

Overview Of The 2010 Carbonaceous Aerosols And Radiative Effects Study (Cares), Rahul A. Zaveri, William J. Shaw, Daniel J. Cziczo, Beat Schmid, Richard Ferrare, M. Lizabeth Alexander, Raul Alvarez, W. Patrick Arnott, Dean B. Atkinson, Sunil Baidar, Robert M. Banta, James Barnard, Josef Beranek, Larry K. Berg, Fred Brechtel, W. Alan Brewer, John F. Cahill, Brian Cairns, Christopher D. Cappa, D. Chand, S. China, Jennifer M. Comstock, Manvendra K. Dubey, Robert C. Easter, M. H. Erickson, Jerome Fast, Cody Floerchinger, B. Flowers, Edward C. Fortner, Jeffrey S. Gaffney, Mary K. Gilles, Kyle Gorkowski, William Gustafson, Madhu Gyawali, J. Hair, R. M. Hardesty, Joseph Harworth, Scott C. Herndon, Naruki Hiranuma, Chris Hostetler, John M. Hubbe, John T. Jayne, H. Jeong, B. Tom Jobson, Evgueni Kassianov, Lawrence I. Kleinman, C. Kluzek, W. Berk Knighton, Katheryn R. Kolesar, Chongai Kuang, Alena Kubátová, Andrew O. Langford, Alexander Laskin, N. Laulainen, Richard D. Marchbanks, Claudio Mazzoleni, Fan Mei, Ryan C. Moffet, Dan Nelson, Michael Obland, Hilke Oetjen, Timothy B. Onasch, I. Ortega, Matteo Ottaviani, Mikhail Pekour, Kimberly A. Prather, James Gregory Radney, Raymond R. Rogers, Scott P. Sandberg, Arthur J. Sedlacek, Christoph J. Senff, Gunnar I. Senum, Ari Setyan, John E. Shilling, Manishkumar Shrivastava, C. Song, Stephen R. Springston, R. Subramanian, Kaitlyn Suski, Jason Tomlinson, Rainer M. Volkamer, H. W. Wallace, Jian Wang, A. M. Weickmann, Douglas R. Worsnop, Xiao-Ying Yu, Alla Zelenyuk, Qi Zhang

Chemistry Faculty Publications and Presentations

Substantial uncertainties still exist in the scientific understanding of the possible interactions between urban and natural (biogenic) emissions in the production and transformation of atmospheric aerosol and the resulting impact on climate change. The US Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) program’s Carbonaceous Aerosol and Radiative Effects Study (CARES) carried out in June 2010 in Central Valley, California, was a comprehensive effort designed to improve this understanding. The primary objective of the field study was to investigate the evolution of secondary organic and black carbon aerosols and their climate-related properties in the Sacramento urban plume as it was …

Fabrication Of Poly(Vinylidene Fluoride) (Pvdf) Nanofibers Containing Nickel Nanoparticles As Future Energy Server Materials, Faheem A. Sheikh, Travis Cantu, Javier Macossay-Torres, Hern Kim

Chemistry Faculty Publications and Presentations

In the present study, we introduce Poly(vinylidene fluoride) (PVDF) nanofibers containing nickel (Ni) nanoparticles (NPs) as a result of an electrospinning. Typically, a colloidal solution consisting of PVDF/Ni NPs was prepared to produce nanofibers embedded with solid NPs by electrospinning process. The resultant nanostructures were studied by SEM analyses, which confirmed well oriented nanofibers and good dispersion of Ni NPs over them. The XRD results demonstrated well crystalline feature of PVDF and Ni in the obtained nanostructures. Physiochemical aspects of prepared nano-structures were characterized for TEM which confirmed nanofibers were welloriented and had good dispersion of Ni NPs. Furthermore, the …

Microscopic And Spectroscopic Studies Of Thermally Enhanced Electrospun Pmma Micro- And Nanofibers, Sean Pelfrey, Travis Cantu, Michael R. Papantonakis, Duane L. Simonson, R. Andrew Mcgill, Javier Macossay-Torres

Chemistry Faculty Publications and Presentations

Carbon nanofibers (CNFs) have been incorporated into poly(methyl methacrylate) (PMMA) through electrospinning. The resulting micro- and nanofibers have been characterized by Scanning Electron Microscopy (SEM), which confirmed fiber formation and demonstrated a core-sheath structure of the PMMA fibers. Thermogravimetric Analysis (TGA) was used to obtain the thermal properties of the materials, indicating an enhancement in the thermal properties of the composite fibers. In addition, Fourier Transform Infrared Spectroscopy (FTIR) was utilized to investigate the interactions of PMMA micro- and nanofibers with CNFs, demonstrating the preferred sites of intermolecular interactions between the polymer matrix and the filler.

Neutron-Scattering Study Of Librations And Intramolecular Phonons In Rb_{2.6}K_{0.4}C_{60}, D. Reznik, W. A. Kamitakahara, D. A. Neumann, J. R. D. Copley, J. E. Fischer, Robert M. Strongin, M. A. Cichy, Amos B. Smith Iii

Chemistry Faculty Publications and Presentations

We report the results of inelastic neutron-scattering measurements on Rb_2.6K_0.4C₆₀. Librational modes were observed as broad peaks with maxima between 4.1 and 4.7 meV, as the temperature is lowered from 300 to 12 K. As in K₃C₆₀, no change in the width or position of the librational peak was observed when the sample was cooled through the superconducting transition. Thus any coupling of the librations to electronic states is small. The magnitude of the orientational potential barrier was estimated from the librational peak frequency. A flat background observed in the …