Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Chemistry

Series

Chemical and Biochemical Engineering Faculty Research & Creative Works

Articles 1 - 8 of 8

Full-Text Articles in Engineering

Highly Efficient Dopamine Sensing With A Carbon Nanotube-Encapsulated Metal Chalcogenide Nanostructure, Harish Singh, Jiandong Wu, Kurt A.L. Lagemann, Manashi Nath Mar 2024

Highly Efficient Dopamine Sensing With A Carbon Nanotube-Encapsulated Metal Chalcogenide Nanostructure, Harish Singh, Jiandong Wu, Kurt A.L. Lagemann, Manashi Nath

Chemical and Biochemical Engineering Faculty Research & Creative Works

Carbon nanotube-encapsulated nickel selenide composite nanostructures were used as nonenzymatic electrochemical sensors for dopamine detection. These composite nanostructures were synthesized through a simple, one-step, and environmentally friendly chemical vapor deposition method, wherein the CNTs were formed in situ from pyrolysis of a carbon-rich metallo-organic precursor. The composition and morphology of these hybrid NiSe2-filled carbon nanostructures were confirmed by powder X-ray diffraction, Raman, X-ray photoelectron spectroscopy, and high-resolution transmission electron microscopy images. Electrochemical tests demonstrated that the as-synthesized hybrid nanostructures exhibited outstanding electrocatalytic performance toward dopamine oxidation, with a high sensitivity of 19.62 μA μM-1 cm-2, low detection limit, broad linear …


Coating Compositions And Methods For Using The Same, Fateme Rezaei, Thomas P. Schuman, Glenn Morrison Jan 2021

Coating Compositions And Methods For Using The Same, Fateme Rezaei, Thomas P. Schuman, Glenn Morrison

Chemical and Biochemical Engineering Faculty Research & Creative Works

Coating compositions and methods for using the same are disclosed. The coating compositions can include an aminosilica adsorbent. The coating compositions can adsorb CO2.


Plasma Polymerization Of Tetrafluoroethylene. Iii. Capacitive Audio Frequency (10 Khz) And Ac Discharge, N. (Nicholas) C. Morosoff, H. Yasuda, E. S. Brandt, C. N. Reilley Jan 1979

Plasma Polymerization Of Tetrafluoroethylene. Iii. Capacitive Audio Frequency (10 Khz) And Ac Discharge, N. (Nicholas) C. Morosoff, H. Yasuda, E. S. Brandt, C. N. Reilley

Chemical and Biochemical Engineering Faculty Research & Creative Works

The plasma polymerization of tetrafluoroethylene (TFE) is studied in a capacitively coupled system with internal electrodes using a 10 kHz (af) and a 60 Hz (ac) source. The emphasis is on identifying conditions that are compatible with continuous coating of plasma polymer on a substrate moving through the center of the interelectrode gap. Operation at a pressure below 100 mTorr is most favorable for deposition of a substantial portion of the plasma polymer on this substrate. Plasma polymer deposited in this way is characterized by ESCA and by deposition rate data and compared to that deposited using rf power in …


Plasma Polymerization Of Tetrafluoroethylene. Ii. Capacitive Radio Frequency Discharge, N. (Nicholas) C. Morosoff, H. Yasuda, E. S. Brandt, C. N. Reilley Jan 1979

Plasma Polymerization Of Tetrafluoroethylene. Ii. Capacitive Radio Frequency Discharge, N. (Nicholas) C. Morosoff, H. Yasuda, E. S. Brandt, C. N. Reilley

Chemical and Biochemical Engineering Faculty Research & Creative Works

The plasma polymerization of tetrafluoroethylene (TFE) is studied in a capacitively coupled system with internal electrodes using radio frequency (13.56 MHz) power. The emphasis is on identifying conditions that are compatible with continuous coating of plasma polymer on a substrate moving through the center of the interelectrode gap. At high pressure (500 mTorr), deposition of plasma polymer is primarily on the electrodes rather than on a substrate placed midway between electrodes. Glow is observed in only part of the interelectrode gap at low powers and fills the gap only at high power levels. The use of a magnetic field effects …


The Mechanism Of The Electrooxidation Of Acetylene On Gold, James W. Johnson, J. L. Reed, William Joseph James Jan 1967

The Mechanism Of The Electrooxidation Of Acetylene On Gold, James W. Johnson, J. L. Reed, William Joseph James

Chemical and Biochemical Engineering Faculty Research & Creative Works

Acetylene has been oxidized anodically in aqueous solutions at 80 °C on gold electrodes. It was found that the partial oxidation to CO2 was accompanied by a polymer formation. Effects of potential, acetylene partial pressure, pH, and temperature on the rate (current) were measured. A discontinuity in the Tafel curves was noted that indicated a change in the reaction mechanism with potential. The discontinuity was also pH dependent. A mechanism involving the discharge of H2O and/or OH− has been proposed that is consistent with the experimental results. © 1967, The Electrochemical Society, Inc. All rights reserved.


The Anodic Dissolution Of Cadmium, James W. Johnson, E. Deng, S. C. Lai, William Joseph James Jan 1967

The Anodic Dissolution Of Cadmium, James W. Johnson, E. Deng, S. C. Lai, William Joseph James

Chemical and Biochemical Engineering Faculty Research & Creative Works

The anodic dissolution of cadmium has been studied in aqueous solutions containing Cl−, Br−, I−, Ac−, SO4=, and NO3− ions. The normal valence (+2) was found in all solutions with the exception of NO3−. The apparent valence (calculated) of cadmium ions in nitrate solutions varied from 1.2 to 2.0 and was found to be a function of NO3− concentration, current density, and temperature. An anodic dissolution mechanism has been proposed involving local corrosion and disintegration of the anode which is consistent with the experimental results. © 1967, The Electrochemical Society, Inc. All rights reserved.


The Effect Of Concentration On The Viscosities Of Solutions Of Linear Flexible High Polymers, Lung Yu Chou, Jacques L. Zakin Jan 1967

The Effect Of Concentration On The Viscosities Of Solutions Of Linear Flexible High Polymers, Lung Yu Chou, Jacques L. Zakin

Chemical and Biochemical Engineering Faculty Research & Creative Works

Viscosity-concentration results in the moderately concentrated range for four samples of polyisobutylene (molecular weights of 1.3 x 104 to 1.0 x 106) in cyclohexane (concentrations up to 4.7 g./dl.) and in benzene (concentrations up to 7.0 g./dl.) at 24°C. (a theta solvent) showed molecular weight and goodness of solvent dependencies similar to those reported earlier for three other polymers. For polyisobutylene, polystyrene, and a copolymer of styrene and methyl methaerylate in good solvents, viscosity-concentration data plotted as ηsp. C[η] vs. k′[η]C fit a single curve. The linear region of this curve suggests that the Huggins equation is useful to C[η] …


Radial Pressure Gradient In Turbulent Pipe Flow, Gary Kent Patterson, Walter J. Ewbank, Virgil A. Sandborn Jan 1967

Radial Pressure Gradient In Turbulent Pipe Flow, Gary Kent Patterson, Walter J. Ewbank, Virgil A. Sandborn

Chemical and Biochemical Engineering Faculty Research & Creative Works

Measurements made with a Prandtl static pressure probe have demonstrated that a radial pressure gradient does exist in turbulent pipe flow with approximately the magnitude predicted by Sandborn from hot-wire anemometry measurements.