Engineering Commons^™

Investigation Of Oleic Acid As A Dispersant For Hydroxyapatite Powders For Use In Ceramic Filled Photo-Curable Resins For Stereolithography, Brendan Kennedy, Eamonn De Barra, Stuart Hampshire, Maura Kelleher

Articles

Stereolithography allows production of porous hydroxyapatite scaffolds for bone regeneration but is limited by the challenging rheology of ceramic filled resins. Oleic acid, a natural fatty acid, was applied in concentrations of 0.0–0.3 wt% to improve the rheological properties of HAp resins for the fabrication of solid cylinders and scaffolds by digital light processing (DLP) printing in a wiperless system. Bonding by chemisorption was confirmed by FTIR analysis. The powders were then incorporated into a photo-curable resin of 1–6 hexanediol diacrylate at 18–30 vol%. The shear viscosity and sedimentation rates of photocurable resins containing HAp powder decreased with increasing concentration …

Limits Of Detection Of Mycotoxins By Laminar Flow Strips: A Review, Xinyi Zhao, Hugh Byrne, Christine M. O’Connor, James Curtin, Furong Tian

Articles

Mycotoxins are secondary metabolic products of fungi. They are poisonous, carcinogenic, and mutagenic in nature and pose a serious health threat to both humans and animals, causing severe illnesses and even death. Rapid, simple and low-cost methods of detection of mycotoxins are of immense importance and in great demand in the food and beverage industry, as well as in agriculture and environmental monitoring, and, for this purpose, lateral flow immunochromatographic strips (ICSTs) have been widely used in food safety and environmental monitoring. The literature to date describing the development of ICSTs for the detection of different types of mycotoxins using …

Advancing Competency In Managing Risk And Knowledge: Steps Toward Operationalisation Of The Risk-Knowledge Infinity Cycle (Rki Cycle) Part 3: Uncovering Knowledge For Qrm Through Knowledge Mapping At Node 1, Martin Lipa, Valerie Mulholland, Anne Greene

Articles

To date, literature on the Risk-Knowledge Infinity Cycle (RKI Cycle) has mainly been theoretical. This paper series intent is to focus on the operationalisation of the RKI Cycle by describing a series of steps – the “How to” – for RKI Cycle deployment, to help move the RKI Cycle from theory to practice. The third paper in this series focuses on ensuring the best available knowledge flows into QRM through a case study demonstrating knowledge mapping to support effective quality risk assessment during commissioning and qualification activities.

Synergistic Anticancer Response Of Curcumin And Piperine Loaded Lignin-G-P (Nipam-Co-Dmaema) Gold Nanogels Against Glioblastoma Multiforme, Xinyi Zhao, Bilal Javad, Daxing Cui, James Curtin, Furong Tian

Articles

Glioblastoma multiforme (GBM) is the most aggressive and commonly diag- 11 nosed brain cancer and presents a strong resistance to routine chemotherapeutic drugs. 12 The present study involves the synthesis of Lignin-g- p (NIPAM-co-DMAEMA) gold 13 nanogel, loaded with curcumin and piperine to treat GBM. The application has three 14 functions: (1) overcome the limitations of biodistribution, (2) enhance the toxicity of an- 15 ticancer drugs against GBM, (3) identify the uptake pathway. Atom transfer radical 16 polymerization was used to synthesize the Lignin-g-PNIPAM network, crosslinked with 17 the gold nanoparticles (GNPs) to self-assemble into nanogels. The size distribution and …

In Depth Characterisation Of The Biomolecular Coronas Of Polymer Coated Inorganic Nanoparticles With Differential Centrifugal Sedimentation, André Perez-Potti, Hender Lopez, Beatriz Pelaz, Abuelmagd Abdelmonem, Mahmoud G. Soliman, Ingmar Schoen, Philip M. Kelly, Kenneth A. Dawson, Wolfgang J. Parak, Zeljka Krpetic, Marco P. Monopoli

Articles

Advances in nanofabrication methods have enabled the tailoring of new strategies towards the controlled production of nanoparticles with attractive applications in healthcare. In many cases, their characterisation remains a big challenge, particularly for small-sized functional nanoparticles of 5 nm diameter or smaller, where current particle sizing techniques struggle to provide the required sensitivity and accuracy. There is a clear need for the development of new reliable characterisation approaches for the physico-chemical characterisation of nanoparticles with significant accuracy, particularly for the analysis of the particles in the presence of complex biological fluids. Herein, we show that the Differential Centrifugal Sedimentation can …

The Fabrication And Properties Of Magnetorheological Elastomers Employing Bio-Inspired Dopamine Modified Carbonyl Iron Particles, Yanfen Zhou, Lele Li, Wenyue Li, Shipeng Wen, Liang Jiang, Stephen Jerrams, Jianwei Ma, Shaojuan Chen

Articles

To obtain magnetorheological elastomers (MREs) with improved mechanical properties and exhibiting an enhanced magnetorheological (MR) effect, bio-inspired dopamine modification has been used to improve the functionality at the surface of carbonyl iron (CI) particles. Various techniques including x-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to confirm that a polydopamine (PDA) layer of about 27.5 nm had been successfully deposited on the surface of the carbonyl iron particles prior to their inclusion in the MRE composites. The magnetic properties of PDA modified CI particles were shown to be almost the same as those …

Enhanced Covalent Interface, Crosslinked Network And Gas Barrier Property Of Functionalized Graphene Oxide/Styrene-Butadiene Rubber Composites Triggered By Thiol-Ene Click Reaction, Long Zheng, Stephen Jerrams, Tian Su, Zongchao Xu, Liqun Zhang, Li Liu, Shipeng Wen

Articles

The high gas barrier property of a rubber composite is of great significance for reducing the exhaust gas emissions due to tire rolling resistance and hence the contribution this factor makes to environmental protection. Enhanced covalent interfaces and crosslinked networks are crucial to the gas barrier property of rubber composites. In this research, γ-mercaptopropyltriethoxysilane (MPS) modified GO (MGO)/styrene-butadiene rubber (SBR) composites were prepared by a synergetic strategy of latex compounding method and thiol-ene click reaction. It was found that the mercapto groups in MGO reacted with the vinyl groups in SBR molecules through thiol-ene click reaction during the crosslinking process …

Advancement Of Predictive Modeling Of Zeta Potentials (Ζ) In Metal Oxide Nanoparticles With Correlation Intensity Index (Cii), Andrey A. Toropov, Natalia Sizochenko, Alla P. Toropova, Danuta Leszczynska, Jerzy Leszczynski

Articles

It was expected that index of the ideality of correlation (IIC) and correlation intensity index (CII) could be used as possible tools to improve the predictive power of the quantitative model for zeta potential of nanoparticles. In this paper, we test how the statistical quality of quantitative structure-activity models for zeta potentials (ζ, a common measurement that reflects surface charge and stability of nanomaterial) could be improved with the use of these two indexes. Our hypothesis was tested using the benchmark data set that consists of 87 measurements of zeta potentials in water. We used quasi-SMILES molecular representation to take …

The Effect Of Curing And Zirconium Content On The Wettability And Structure Of A Silicate Hybrid Sol-Gel Material, Emma Machugh, Maikki Cullen, Alicja Kaworek, Brendan Duffy, Mohamed Oubaha

Articles

Functional hybrid sol-gel coatings have been developed for numerous applications with a wide range of wettabilities. This study proposes to investigate the relationship between the structure and the wetting properties of a zirconium modified silicate hybrid sol-gel coating. The structures of the coatings were altered by varying the content of zirconium, and the curing process, while keeping the sol-gel preparation conditions identical. The structure of the materials was characterized by FTIR, 29Si NMR and SEM. The thermal properties and the wettability are identified by DSC and contact angle measurements, respectively. By corroborating the structural and wettability analyses, it is shown …

Development Of Magnetorheological Elastomers (Mres) For Strength And Fatigue Resistance, J. Mcintyre, Stephen Jerrams

Books/Book Chapters

Natural rubber (NR)-based magnetorheological elastomers (MREs) exhibiting a reasonable switching effect were fabricated and tested. They were strong enough for use in automotive applications but still needed protection against ageing. Ethylene–propylene–diene rubber (EPDM) is a cost-effective material that is frequently used in the automotive industry because of its advantageous range of properties. With these applications in mind, it was a logical progression to the development of EPDM-based MREs. Unlike strain-crystallising NR, EPDM requires reinforcement to render its tensile and fatigue strength suitable for use in most applications. While small amounts of carbon black were sufficient for the NR-based MREs, a …

A Fast Linear Electro-Optical Effect In A Non-Chiral Bent-Core Liquid Crystal, Yuri Panarin, S.P. Sreenilayam, J.K. Vij, A. Lehmann, C. Tschierske

Articles

We report the observation of an electro-optical effect for a linear rotation of the optical axis as function of the electric field in an achiral tilted bent-core liquid crystalline compound, in which 4-cyanoresorcinol bisbenzoate core is symmetrically terminated by long linear alkyl chains (n =16) on both ends. The linear electro-optic effect observed in this material is similar to the deformed helical ferroelectric liquid crystal (DHFLC) effect reported previously in a FLC material except that dimensions of the helical pitch differ by two orders of magnitude. In the chiral systems, the helical pitch usually lies on the scale of sub-optical …

New Approach Of Modifying The Anatase To Rutile Transition Temperature In Tio2 Photocatalysts, Ciara Byrne, Rachel Fagan, Steven Hinder, Declan Mccormack, Suresh Pillai

Articles

In pure synthetic titanium dioxide, the anatase to rutile phase transition usually occurs between the temperatures of 600 °C and 700 °C. The phase transition temperature can be altered by various methods, including modifying the precursor or by adding dopant or modifier to the TiO2 sample. In an attempt to investigate the phase transition using aromatic carboxylic acids, the current study examines the impact of increasing concentrations of benzoic acid (1 : 0, 1 : 1, 1 : 4 and 1 : 8 molar ratio TiO2 : benzoic acid) on anatase to rutile transition. The samples were characterised using Raman …

Enhanced Corrosion Protection And Biocompatibility Of A Plga-Silane Coating On Az31 Mg Alloy For Orthopaedic Applications, Sankalp Agarwal, Muhammad Morshed, Marie-Noelle Labour, David Hoey, Brendan Duffy, James Curtin, Swarna Jaiswal

Articles

This paper reports a multi-step procedure to fabricate a novel corrosion resistant and biocompatible PLGA-silane coating on the magnesium (Mg) alloy AZ31. The first step involves alkaline passivation followed by dip coating in a methyltriethoxysilane (MTES) and tetraethoxysilane (TEOS) mixture to produce a cross-linked siloxane coating. The second step is to impart an amine functionalization to the silane modified surface by using 3-aminopropyl-triethoxy silane (APTES) for promoting adhesion of the acid terminated poly-(lactic-co-glycolic) acid (PLGA) as a final coating step. Static contact angle measurements, Fourier transform infrared spectroscopy and scanning electron microscopy analysis confirmed the successful assembly of coatings on …

Determination Of The Polymerisation Rate Of A Low-Toxicity Diacetone Acrylamide-Based Holographic Photopolymer Using Raman Spectroscopy, Dervil Cody, Emilia Mihaylova, Luke O'Neill, Izabela Naydenova

Articles

The polymerisation rate of a low-toxicity Diacetone Acrylamide (DA)-based photopolymer has been measured for the first time using Raman spectroscopy. A value for the polymerisation rate of 0.020 s⁻¹ has been obtained for the DA photopolymer by modelling the polymerisation reaction dynamics as a stretched exponential or Kohlrausch decay function. This is significantly lower than the polymerisation rate of 0.100 s⁻¹ measured for the well known Acrylamide (AA)-based photopolymer composition. The effect of the additive glycerol on the polymerisation rate of the DA-based photopolymer has also been investigated. The inclusion of glycerol is observed to increase the rate …

Selection Of The Process Parameters For The Mass Plating Of Discrete Electronic Components, Ann Hopper

Articles

The miniaturisation of electronic components coupled with requirements for high temperature lead free soldering has forced the improvement of the termination finish of surface mount components to meet the critical demands of the electronic industry. In the present work the processing parameters necessary to plate miniature multilayer varistors (MLV’s) have been explored. The tooling selected was a “Rotary flow-thru’ plater” which achieved high volume plating with

Novel Microwave Assisted Synthesis Of Zns Nanomaterials, Suresh Pillai, Michael Seery, Damian Synnott, John Colreavy, Stephen Hinder

Articles

A novel ambient pressure microwave-assisted technique is developed in which silver and indium modified ZnS is synthesised. The as prepared ZnS is characterised by X-ray diffraction, UV-Vis spectroscopy, X-ray photoelectron spectroscopy and luminescence spectroscopy. This procedure produced crystalline materials with particle sizes below 10 nm. The synthesis technique leads to defects in the crystal which induce mid energy levels in the band gap and lead to indoor light photocatalytic activity. Increasing the amount of silver causes a phase transition from cubic blende to hexagonal phase ZnS. In a comparative study, when the ZnS cubic blende is heated in a conventional …

A Highly Efficient Tio2-Xcx Nano-Heterojunction Photocatalyst For Visible-Light Induced Antibacterial Applications, Vinodkumar Etacheri, Michael Seery, Stephen Hinder, Georg Michlits, Suresh Pillai

Articles

Visible-light-induced antibacterial activity of carbon-doped anatase-brookite titania nano-heterojunction photocatalysts are reported for the first time. These heterostructures were prepared using a novel low temperature (100 °C) non-hydrothermal low power microwave (300 W) assisted method. Formation of interband C 2p states was found to be responsible for the band gap narrowing of the carbon doped heterojunctions. The most active photocatalyst obtained after 60 minutes of microwave irradiation exhibits a 2-fold higher visible-light induced photocatalytic activity in contrast to the standard commercial photocatalyst Evonik-Degussa P-25. Staphylococcus aureus inactivation rate constant for carbon-doped nano-heterojunctions and the standard photocatalyst was 0.0023 and -0.0081 min …

Crystallisation And Phase Transition Characteristics Of Sol-Gel-Synthesized Zinc Titanates, Suresh Pillai, Michael Seery, Nicholas Nolan

Articles

No abstract provided.

One-Pot Synthesis Of Anionic (Nitrogen) And Cationic (Sulfur) Codoped High-Temperature Stable, Visible Light Active, Anatase Photocatalysts, Suresh Pillai, Declan Mccormack, Steven Hinder, Pradeepan Periyat

Articles

No abstract provided.

One-Pot Synthesis Of Anionic (Nitrogen) And Cationic (Sulfur) Codoped High-Temperature Stable, Visible Light Active, Anatase Photocatalysts, Suresh Pillai, Declan Mccormack, Steven Hinder, Pradeepan Periyat

Articles

No abstract provided.

Influence Of Magnesium Nitrate On The Corrosion Performance Of Sol-Gel Coated Aa2024-T3 Aluminium Alloy, Rajath Varma, Brendan Duffy, John Cassidy

Articles

Traditional anti-corrosion technology has relied heavily on using reducible metal species, predominantly hexavalent chromium (Cr(VI)), for protecting reactive metal alloys such as aluminium which is extensively used in the aerospace sector. However, the impending changes in the use of Cr(VI) in Europe and the United States have forced aerospace manufacturers to examine alternative materials for protecting aluminium. One of the most promising alternatives being investigated are organosilane based sol-gels containing anticorrosion additives. In this work the anti-corrosion properties of magnesium (II) nitrate (Mg(NO3)2) as a inhibitor was investigated at different concentrations (0.1% - 1.0 wt %) in a methyltriethoxysilane (MTEOS) …

Localised Galvanic Corrosion Processes In Thermal Spray Coated/Cast Aluminium Alloy Systems, David Culliton, Tony Betts, David Kennedy

Conference Papers

Cast Aluminium Alloys, because of the propensity of aluminium to react with impurities and alloying elements, are prone to developing IM impurities during the solidification process. These IM phases can act, in some fluids, as initiation sites for localised corrosion processes, resulting in degradation phenomena, such as pitting. Whilst Thermal Spray coatings can improve the wear resistance of Cast Aluminium Alloys, their corrosion performance may be hampered by the presence of through porosity within the coating.

The present work details some preliminary studies of the localised corrosion processes occurring at the interface area between a Thermal Spray coating and a …

Real-Time Plasma Controlled Chemistry In A Two-Frequency, Confined Plasma Etcher, Vladimir Milosavljevic, Albert R. Ellingboe, Cezar Gaman, John V. Ringwood

Articles

The physics issues of developing model-based control of plasma etching are presented. A novel methodology for incorporating real-time model-based control of plasma processing systems is developed. The methodology is developed for control of two dependent variables (ion flux and chemical densities) by two independent controls (27 MHz power and O2flow). A phenomenological physics model of the nonlinear coupling between the independent controls and the dependent variables of the plasma is presented. By using a design of experiment, the functional dependencies of the response surface are determined. In conjunction with the physical model, the dependencies are used to deconvolve the sensor …

Improved High-Temperature Stability And Sun-Light-Driven Photocatalytic Activity Of Sulfur-Doped Anatase Tio2, Suresh Pillai, Declan Mccormack, Pradeepan Periyat, John Colreavy, Steve Hinder

Articles

No abstract provided.

Electroanalysis Using Differential Pulse Methods And Stripping Techniques., Enda Howard

Masters

Application of a differential pulse waveform to a microelectrode or a rotating disk electrode results in a peaked response for amperometric redox reactions. Based on these observations models were proposed and tested for these methods. Simulations of the models were carried out by inputting the relevant equations into Microsoft Excel. The microelectrode study revealed a good correlation between one model and the numerical derivative of the current following a linear sweep potential waveform. Experimentally the derivative can be obtained numerically following a linear sweep. The alternative differential pulse waveform requires more sophisticated equipment and the response can be affected by …