Engineering Commons^™

Piezoelectric Signals In Vascularized Bone Regeneration, Delfo D’Alessandro, Claudio Ricci, Mario Milazzo, Giovanna Strangis, Francesca Forli, Gabriele Buda, Mario Petrini, Stefano Berrettini, M. Jasim Uddin, Serena Danti, Paolo Parchi

Chemistry Faculty Publications and Presentations

The demand for bone substitutes is increasing in Western countries. Bone graft substitutes aim to provide reconstructive surgeons with off-the-shelf alternatives to the natural bone taken from humans or animal species. Under the tissue engineering paradigm, biomaterial scaffolds can be designed by incorporating bone stem cells to decrease the disadvantages of traditional tissue grafts. However, the effective clinical application of tissue-engineered bone is limited by insufficient neovascularization. As bone is a highly vascularized tissue, new strategies to promote both osteogenesis and vasculogenesis within the scaffolds need to be considered for a successful regeneration. It has been demonstrated that bone and …

Single-Molecule Localization Microscopy Of 3d Orientation And Anisotropic Wobble Using A Polarized Vortex Point Spread Function, Tianben Ding, Matthew D. Lew

Electrical & Systems Engineering Publications and Presentations

Within condensed matter, single fluorophores are sensitive probes of their chemical environments, but it is difficult to use their limited photon budget to image precisely their positions, 3D orientations, and rotational diffusion simultaneously. We demonstrate the polarized vortex point spread function (PSF) for measuring these parameters, including characterizing the anisotropy of a molecule’s wobble, simultaneously from a single image. Even when imaging dim emitters (∼500 photons detected), the polarized vortex PSF can obtain 12 nm localization precision, 4°–8° orientation precision, and 26° wobble precision. We use the vortex PSF to measure the emission anisotropy of fluorescent beads, the wobble dynamics …

Aptamer-Based Voltammetric Biosensing For The Detection Of Codeine And Fentanyl In Sweat And Saliva, Rosa Lashantez Cromartie

FIU Electronic Theses and Dissertations

Despite the many governmental and medicinal restrictions created to combat the opioid epidemic in the United States, opioid abuse and overdose rates continue to rise. The development of an aptamer-based voltammetric sensor and biosensor is described in this dissertation. The aim was to develop a low-cost, sensitive, and specific aptamer-based sensor for on-site, label-free determination of codeine and fentanyl in biological fluids. To do this, the surfaces of screen-printed carbon electrodes (SPCE) were modified with gold nanoparticles (AuNPs), followed by the addition of single-stranded DNA aptamers. These were covalently bound to the electrode surface. Operations of the sensors were collected …

The Primarily Undergraduate Nanomaterials Cooperative: A New Model For Supporting Collaborative Research At Small Institutions On A National Scale, Steven M. Huges, Mark P. Hendricks, Katherine M. Mullaugh, Mary E. Anderson, Anne K. Bently, Justin G. Clar, Clyde A. Daly Jr., Mark D. Ellison, Z. Vivian Feng, Natalia I. Gonzalex-Pech, Leslie S. Hamachi, Christine L. Heinecke, Joseph D. Keene, Adam M. Maley, Andrea M. Munro, Peter N. Njoki, Jacob H. Olshansky, Katherine E. Plass, Kathryn R. Riley, Matthew D. Sonntag, Sarah K. St. Angelo, Lucas B. Thompson, Emily J. Tollefson, Lauren E. Toote, Korin E. Wheeler

Chemistry Faculty Publications

The Primarily Undergraduate Nanomaterials Cooperative (PUNC) is an organization for research-active faculty studying nanomaterials at Primarily Undergraduate Institutions (PUIs), where undergraduate teaching and research go hand-in-hand. In this perspective, we outline the differences in maintaining an active research group at a PUI compared to an R1 institution. We also discuss the work of PUNC, which focuses on community building, instrument sharing, and facilitating new collaborations. Currently consisting of 37 members from across the United States, PUNC has created an online community consisting of its Web site (nanocooperative.org), a weekly online summer group meeting program for faculty and students, …

Synergistic Anticancer Response Of Curcumin And Piperine Loaded Lignin-G-P (Nipam-Co-Dmaema) Gold Nanogels Against Glioblastoma Multiforme, Xinyi Zhao, Bilal Javad, Daxing Cui, James Curtin, Furong Tian

Articles

Glioblastoma multiforme (GBM) is the most aggressive and commonly diag- 11 nosed brain cancer and presents a strong resistance to routine chemotherapeutic drugs. 12 The present study involves the synthesis of Lignin-g- p (NIPAM-co-DMAEMA) gold 13 nanogel, loaded with curcumin and piperine to treat GBM. The application has three 14 functions: (1) overcome the limitations of biodistribution, (2) enhance the toxicity of an- 15 ticancer drugs against GBM, (3) identify the uptake pathway. Atom transfer radical 16 polymerization was used to synthesize the Lignin-g-PNIPAM network, crosslinked with 17 the gold nanoparticles (GNPs) to self-assemble into nanogels. The size distribution and …

Systematic Evaluation Of A Novel Self-Healing Poly(Acrylamide-Co-Vinyl Acetate)/Alginate Polymer Gel For Fluid Flow Control In High Temperature And High Salinity Reservoirs, Jingyang Pu, Baojun Bai, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Preferential fluid flow often occurs when water and CO₂ is injected into mature oilfields, sig-nificantly reducing their injection efficiency. Particle gels have been evaluated and applied to control the short circulation problems. This study systematically investigated a novel poly(acrylamide-co-vinyl acetate)/alginate-based interpenetrated gel system (Alg-IPNG) which is designed to control the preferential fluid flow problems in high-temperature reservoirs. Chromium acetate was incorporated into the gel system to provide the delayed crosslinking feature of the particle gels. The alginate polymer system can also take advantage of the Ca²⁺ ions in the formation water, which exist in most reservoirs, to reinforce …

3d-Printable And Open-Source Modular Smartphone Visible Spectrophotometer, Brandon Winters, Nick Banfield, Cassandra Dixon, Anna Swensen, Dakota Holman, Braxton Fillbrown

Chemistry Faculty Publications

The past four decades have brought significant and increasingly rapid changes to the world of instrument design, fabrication, and availability due to the emergence of 3D printing, open-source code and equipment, and low-cost electronics. These, along with other technological advances represent a nexus in time ripe for the wide-spread production and availability of low-cost sophisticated scientific equipment. To that end, the design of a 3D printable and open-source, modular spectrometer is described. This specific instrument is distinctly different from others that have been reported in recent years in that it was designed outside of the “black box” paradigm of …

Experimental Data On Water Soluble Polymers Thermal And Hydrolytic Stability, Reactivity Ratios Of Monomers And Frr Calculation For Thermally Stable Preformed Particle Gels Therefrom, Buddhabhushan Salunkhe, Thomas P. Schuman, Ali Al Brahim, Baojun Bai

Chemistry Faculty Research & Creative Works

Experimental data on water soluble polymer thermal and hydrolytic stability in acidic, neutral and basic pH conditions in aqueous solution is presented. Thermal and hydrolytic stability of polymer aqueous solutions were monitored in variable pH medium by aging at 130 °C temperature for different aging time. Polymer viscosity measurements were performed periodically for 3 months. Furthermore, this data can serve as a basis of monomer selection for thermally stable hydrogels for applications like oil recovery, hydrogel coatings for steam sterilized medical devices and other applications. Reactivity ratios were determined for monomers associated to the most stable polymers using ¹H …

Hydrocracking Of Octacosane And Cobalt Fischer–Tropsch Wax Over Nonsulfided Nimo And Pt-Based Catalysts, Wenping Ma, Jungshik Kang, Gary Jacobs, Shelley D. Hopps, Burtron H. Davis

Center for Applied Energy Research Faculty and Staff Publications

The effect of activation environment (N₂, H₂ and H₂S/H₂) on the hydrocracking performance of a NiMo/Al catalyst was studied at 380 °C and 3.5 MPa using octacosane (C₂₈). The catalyst physical structure and acidity were characterized by BET, XRD, SEM-EDX and FTIR techniques. The N₂ activation generated more active nonsulfided NiMo/Al catalyst relative to the H₂ or H₂S activation (X_C28, 70–80% versus 6–10%). For a comparison, a NiMo/Si-Al catalyst was also tested after normal H₂ activation and showed higher activity at the same process …

Emergence Of Non-Hexagonal Crystal Packing Of Deswollen And Deformed Ultra-Soft Microgels Under Osmotic Pressure Control, Molla R. Islam, Rachel Nguyen, L. Andrew Lyon

Biology, Chemistry, and Environmental Sciences Faculty Articles and Research

Highly solvent swollen poly(N-isopropylacrylamide-co-acrylic acid) microgels are synthesized without exogenous crosslinker, making them extremely soft and deformable. These ultralow crosslinked microgels (ULC) are incubated under controlled osmotic pressure to provide a slow (and presumably thermodynamically controlled) approach to higher packing densities. It is found that ULC microgels show stable colloidal packing over a very wide range of osmotic pressures and thus packing densities. Surprising observation of co-existence between hexagonal and square lattices is also made over the lower range of studied osmotic pressures, with microgels apparently changing shape from spheres to cubes in defects or grain boundaries. It is proposed …

Unintended Consequences Of Air Cleaning Chemistry, Douglas B. Collins, Delphine K. Farmer

Faculty Journal Articles

Amplified interest in maintaining clean indoor air associated with the airborne transmission risks of SARS-CoV-2 have led to an expansion in the market for commercially available air cleaning systems. While the optimal way to mitigate indoor air pollutants or contaminants is to control (remove) the source, air cleaners are a tool for use when absolute source control is not possible. Interventions for indoor air quality management include physical removal of pollutants through ventilation or collection on filters and sorbent materials, along with chemically reactive processes that transform pollutants or seek to deactivate biological entities. This perspective intends to highlight the …

Silk-Cellulose Acetate Biocomposite Materials Regenerated From Ionic Liquid, Ashley Rivera-Galetti, Chrtstopher R. Gough, Farhan Kaleem, Michael Burch, Chris Ratcliffe, Ping Lu, David Salas-De La Cruz, Xiao Hu

Faculty Scholarship for the College of Science & Mathematics

The novel use of ionic liquid as a solvent for biodegradable and natural organic biomaterials has increasingly sparked interest in the biomedical field. As compared to more volatile traditional solvents that rapidly degrade the protein molecular weight, the capability of polysaccharides and proteins to dissolve seamlessly in ionic liquid and form fine and tunable biomaterials after regeneration is the key interest of this study. Here, a blended system consisting of Bombyx Mori silk fibroin protein and a cellulose derivative, cellulose acetate (CA), in the ionic liquid 1-ethyl-3-methylimidazolium acetate (EMIMAc) was regenerated and underwent characterization to understand the structure and physical …

Knn Based Piezo-Triboelectric Lead-Free Hybrid Energy Films, Abu Masa Abdullah, Muhtasim Ul Karim Sadaf, Farzana Tasnim, Horacio Vasquez, Karen Lozano, M. Jasim Uddin

Chemistry Faculty Publications and Presentations

In recent times, the triboelectric and piezoelectric effects have garnered significant attention towards developing advanced material composites for energy harvesting and sensory applications. In this work, potassium sodium niobate (KNN) based energy films (EF) have been developed to utilize mechanical energy while simultaneously taking advantage of triboelectric and piezoelectric mechanisms. The KNN particles were synthesized using a wet ball milling technique and then incorporated into a polyvinylidene difluoride (PVDF) matrix together with addition of multi wall carbon nanotubes (MWCNT). The film was used to develop a piezoelectric nanogenerator (PENG) fitted with copper electrodes. The piezoelectric output of the film was …

Hydrochloric Acid Modification And Lead Removal Studies On Naturally Occurring Zeolites From Nevada, New Mexico, And Arizona, Garven M. Huntley, Rudy Luck, Michael Mullins, Nick Newberry

Michigan Tech Publications

Four naturally occurring zeolites were examined to verify their assignments as chabazites AZLB-Ca and AZLB-Na (Bowie, Arizona) and clinoptilolites NM-Ca (Winston, New Mexico) and NV-Na (Ash Meadows, Nevada). Based on powder X-ray diffraction, NM-Ca was discovered to be mostly quartz with some clinoptilolite residues. Treatment with concentrated HCl (12.1 M) acid resulted in AZLB-Ca and AZLB-Na, the chabazite-like species, becoming amorphous, as confirmed by powder X-ray diffraction. In contrast, NM-Ca and NV-Na, which are clinoptilolite-like species, withstood boiling in concentrated HCl acid. This treatment removes calcium, magnesium, sodium, potassium, aluminum, and iron atoms or ions from the framework while leaving …

Post Covid-19 Water And Waste Water Management To Protect Public Health And Geoenvironment, Ken Cornell, Arvin Farid

Chemistry and Biochemistry Faculty Publications and Presentations

The coronavirus disease 2019 pandemic has posed severe threats to humans and the geoenvironment. The findings of severe acute respiratory syndrome coronavirus 2 (Sars-CoV-2) traces in waste water and the practice of disinfecting outdoor spaces in several cities in the world, which can result into the entry of disinfectants and their by-products into storm drainage systems and their subsequent discharge into rivers and coastal waters, raise the issue of environmental, ecological and public health effects. The aims of the current paper are to investigate the potential of water and waste water to operate as transmission routes for Sars-CoV-2 and the …

Biomedical Applications And Syntheses Of Selected Anthraquinone Dyes, Richard Sirard

Senior Honors Theses

Anthraquinones are aromatic organic compounds that have multiple applications in the biomedical field. Some anthraquinone-based compounds are used as fluorophores to contrast cell nuclei while others act as chemotherapeutic agents. However, there are not many fluorescent anthraquinone cell stains currently available. In this study, commercially available anthraquinone dyes, in addition to other dye families and compounds, were reviewed for their unique properties, advantages, and drawbacks. The development and characterization of three novel anthraquinone fluorophores revealed promising photophysical characteristics, like large Stokes shifts. One of the compounds, RBS3, was chosen for fixed and live cell staining and exhibited desirable biomedical properties. …

Suppressing Bias Stress Degradation In High Performance Solution Processed Organic Transistors Operating In Air, Hamna F. Iqbal, Qianxiang Ai, Karl J. Thorley, Hu Chen, Iain Mcculloch, Chad Risko, John E. Anthony, Oana D. Jurchescu

Chemistry Faculty Publications

Solution processed organic field effect transistors can become ubiquitous in flexible optoelectronics. While progress in material and device design has been astonishing, low environmental and operational stabilities remain longstanding problems obstructing their immediate deployment in real world applications. Here, we introduce a strategy to identify the most probable and severe degradation pathways in organic transistors and then implement a method to eliminate the main sources of instabilities. Real time monitoring of the energetic distribution and transformation of electronic trap states during device operation, in conjunction with simulations, revealed the nature of traps responsible for performance degradation. With this information, we …

Bibliometric Analysis Of Named Entity Recognition For Chemoinformatics And Biomedical Information Extraction Of Ovarian Cancer, Vijayshri Khedkar, Charlotte Fernandes, Devshi Desai, Mansi R, Gurunath Chavan Dr, Sonali Tidke Dr., M. Karthikeyan Dr.

Library Philosophy and Practice (e-journal)

With the massive amount of data that has been generated in the form of unstructured text documents, Biomedical Named Entity Recognition (BioNER) is becoming increasingly important in the field of biomedical research. Since currently there does not exist any automatic archiving of the obtained results, a lot of this information remains hidden in the textual details and is not easily accessible for further analysis. Hence, text mining methods and natural language processing techniques are used for the extraction of information from such publications.Named entity recognition, is a subtask that comes under information extraction that focuses on finding and categorizing specific …

Polymer Based Triboelectric Nanogenerator For Cost‐Effective Green Energy Generation And Implementation Of Surface‐Charge Engineering, Diana Lopez, Aminur Rashid Chowdhury, Abu Masa Abdullah, Muhtasim Ul Karim Sadaf, Isaac Martinez, Brishty Deb Chowdhury, Serena Danti, Christopher J. Ellison, Karen Lozano, Mohammed Jasim Uddin

Chemistry Faculty Publications and Presentations

Performance of triboelectric nanogenerators for harvesting mechanical energy from the ambient environment has been limited by structural complexity, cost-effectiveness, and mechanical weakness of materials. Herein, a cost-effective vertical contact separation mode triboelectric nanogenerator using polyethylene (PE) and polycarbonate (PC) in a regular digital versatile disc is reported. This cost-effective nanogenerator with simplified structures is able to generate an open-circuit voltage of 215.3 V and short-circuit current of 80 μA. The effects of the distance of impact and the air gap between the triboelectric layers have also been tested from 3 to 9 cm, and 0.25 to 1 cm, respectively. It …

Alternative View Of Oxygen Reduction On Porous Carbon Electrocatalysts: The Substance Of Complex Oxygen-Surface Interactions, Giacomo De Falco, Marc Florent, Jacek Jagiello, Yongqiang Cheng, Luke L. Daemen, Anibal J. Ramirez-Cuesta, Teresa J. Bandosz

Publications and Research

Electrochemical oxygen reduction reaction (ORR) is an important energy-related process requiring alternative catalysts to expensive platinum-based ones. Although recently some advancements in carbon catalysts have been reported, there is still a lack of understanding which surface features might enhance their efficiency for ORR. Through a detailed study of oxygen adsorption on carbon molecular sieves and using inelastic neutron scattering, we demonstrated here that the extent of oxygen adsorption/interactions with surface is an important parameter affecting ORR. It was found that both the strength of O2 physical adsorption in small pores and its specific interactions with surface ether functionalities in the …

Nsf Career Award Supports Schwartz's Research On The Chemical Process For Making Rubber Component, Marcus Wolf

General University of Maine Publications

advance his ongoing dissection of the Lebedev process. The well-known, multi-step chemical reaction is used to make butadiene from biomass-derived ethanol. However, little research has been conducted on the Lebedev process at the molecular level. Understanding the intricacies of this process will help researchers create new catalysts necessary for the chemical reactions to make goods from both petroleum and biomass, that would increase butadiene yield.

Exploring The Silent Aspect Of Carbon Nanopores, Teresa J. Bandosz

Publications and Research

Recently, owing to the discovery of graphene, porous carbons experienced a revitalization in their explorations. However, nowadays, the focus is more on search for suitable energy advancing catalysts sensing, energy storage or thermal/light absorbing features than on separations. In many of these processes, adsorption, although not emphasized sufficiently, can be a significant step. It can just provide a surface accumulation of molecules used in other application-driving chemical or physical phenomena or can be even an additional mechanism adding to the efficiency of the overall performance. However, that aspect of confined molecules in pores and their involvement in the overall performance …

Computational Modelling Enables Robust Multidimensional Nanoscopy, Matthew D. Lew

Electrical & Systems Engineering Publications and Presentations

The following sections are included:

• Present State of Computational Modelling in Fluorescence Nanoscopy

• Recent Contributions to Computational Modelling in Fluorescence Nanoscopy

• Outlook on Computational Modelling in Fluorescence Nanoscopy

• Acknowledgments

• References

Substituent Effects On The Solubility And Electronic Properties Of The Cyanine Dye Cy5: Density Functional And Time-Dependent Density Functional Theory Calculations, Austin Biaggne, William B. Knowlton, Bernard Yurke, Jeunghoon Lee, Lan Li

Materials Science and Engineering Faculty Publications and Presentations

The aggregation ability and exciton dynamics of dyes are largely affected by properties of the dye monomers. To facilitate aggregation and improve excitonic function, dyes can be engineered with substituents to exhibit optimal key properties, such as hydrophobicity, static dipole moment differences, and transition dipole moments. To determine how electron donating (D) and electron withdrawing (W) substituents impact the solvation, static dipole moments, and transition dipole moments of the pentamethine indocyanine dye Cy5, density functional theory (DFT) and time-dependent (TD-) DFT calculations were performed. The inclusion of substituents had large effects on the solvation energy of Cy5, with pairs of …

Coating Compositions And Methods For Using The Same, Fateme Rezaei, Thomas P. Schuman, Glenn Morrison

Chemical and Biochemical Engineering Faculty Research & Creative Works

Coating compositions and methods for using the same are disclosed. The coating compositions can include an aminosilica adsorbent. The coating compositions can adsorb CO₂.

Flexible Nanopaper Composed Of Wood-Derived Nanofibrillated Cellulose And Graphene Building Blocks, Qing Li, Ming Dai, Xueren Qian, Tian Liu, Zhenbo Liu, Yu Liu, Ming Chen, Wang He, Suqing Zeng, Yu Meng, Chenchen Dai, Jing Shen, Yingtao Liu, Wenshuai Chen, Wenbo Liu, Ping Lu

Faculty Scholarship for the College of Science & Mathematics

Nanopaper has attracted considerable interest in the fields of films and paper research. However, the challenge of integrating the many advantages of nanopaper still remains. Herein, we developed a facile strategy to fabricate multifunctional nanocomposite paper (NGCP) composed of wood-derived nanofibrillated cellulose (NFC) and graphene as building blocks. NFC suspension was consisted of long and entangled NFCs (10–30 nm in width) and their aggregates. Before NGCP formation, NFC was chemically modified with a silane coupling agent to ensure that it could interact strongly with graphene in NGCP. The resulting NGCP samples were flexible and could be bent repeatedly without any …

Numerical Reconstruction Of Spalled Particle Trajectories In An Arc-Jet Environment, Raghava S. C. Davuluri, Sean C. C. Bailey, Kaveh A. Tagavi, Alexandre Martin

Mechanical Engineering Faculty Publications

To evaluate the effects of spallation on ablative material, it is necessary to evaluate the mass loss. To do so, a Lagrangian particle trajectory code is used to reconstruct trajectories that match the experimental data for all kinematic parameters. The results from spallation experiments conducted at the NASA HYMETS facility over a wedge sample were used. A data-driven adaptive methodology was used to adapts the ejection parameters until the numerical trajectory matches the experimental data. The preliminary reconstruction results show that the size of the particles seemed to be correlated with the location of the ejection event. The size of …

N-Type Charge Transport In Heavily P-Doped Polymers, Zhiming Liang, Hyun Ho Choi, Xuyi Luo, Tuo Liu, Ashkan Abtahi, Uma Shantini Ramasamy, J. Andrew Hitron, Kyle N. Baustert, Jacob L. Hempel, Alex M. Boehm, Armin Ansary, Douglas R. Strachan, Jianguo Mei, Chad Risko, Vitaly Podzorov, Kenneth R. Graham

Chemistry Faculty Publications

It is commonly assumed that charge-carrier transport in doped π-conjugated polymers is dominated by one type of charge carrier, either holes or electrons, as determined by the chemistry of the dopant. Here, through Seebeck coefficient and Hall effect measurements, we show that mobile electrons contribute substantially to charge-carrier transport in π-conjugated polymers that are heavily p-doped with strong electron acceptors. Specifically, the Seebeck coefficient of several p-doped polymers changes sign from positive to negative as the concentration of the oxidizing agents FeCl3 or NOBF4 increase, and Hall effect measurements for the same p-doped polymers reveal that …

Raising Dielectric Permittivity Mitigates Dopant-Induced Disorder In Conjugated Polymers, Meenakshi Upadhyaya, Michael Lu-Díaz, Subhayan Samanta, Muhammad Abdullah, Keith Dusoe, Kevin R. Kittilstved, Dhandapani Venkataraman, Zlatan Akšamija

Electrical and Computer Engineering Faculty Publication Series

Conjugated polymers need to be doped to increase charge carrier density and reach the electrical conductivity necessary for electronic and energy applications. While doping increases carrier density, Coulomb interactions between the dopant molecules and the localized carriers are poorly screened, causing broadening and a heavy tail in the electronic density-of-states (DOS). The authors examine the effects of dopant-induced disorder on two complimentary charge transport properties of semiconducting polymers, the Seebeck coefficient and electrical conductivity, and demonstrate a way to mitigate them. Their simulations, based on a modified Gaussian disorder model with Miller-Abrahams hopping rates, show that dopant-induced broadening of the …

Review On Carbon Dioxide Utilization For Cycloaddition Of Epoxides By Ionic Liquid-Modified Hybrid Catalysts: Effect Of Influential Parameters And Mechanisms Insight, Jimmy Nelson Appaturi, Rajabathar. Jothi Ramalingam, Muthu Kumaran Gnanamani, Govindasami Periyasami, Prabhakarn Arunachalam, Rohana Adnan, Farook Adam, Mohammed D. Wasmiah, Hamad A. Al‐Lohedan

Center for Applied Energy Research Faculty and Staff Publications

The storage, utilization, and control of the greenhouse (CO₂) gas is a topic of interest for researchers in academia and society. The present review article is dedicating to cover the overall role of ionic liquid-modified hybrid materials in cycloaddition reactions. Special emphasis is on the synthesis of various cyclic carbonate using ionic liquid-based modified catalysts. Catalytic activity studies have discussed with respect to process conditions and their effects on conversion and product selectivity for the reaction of cycloaddition of CO₂ with styrene oxide. The reaction temperature and the partial pressure of CO₂ have found to play …