Engineering Commons^™

Atomic Layer Deposited Pt/Tio2-Sio2 And Pt/Zro2-Sio2 For Sequential Adsorption And Oxidation Of Vocs, Busuyi O. Adebayo, Han Yu, Ali A. Rownaghi, Xinhua Liang, Fateme Rezaei

Chemical and Biochemical Engineering Faculty Research & Creative Works

In this work, Pt nanoparticles were loaded on SiO₂, TiO₂-thin-film-modified SiO₂ (TiO₂-SiO₂), or ZrO₂-thin-film-modified SiO₂ (ZrO₂-SiO₂) particles and the composites were investigated for sequential adsorption and desorption/catalytic oxidation of benzene. The SiO₂ was prepared via sol–gel method, while TiO₂-SiO₂ and ZrO₂-SiO₂ were synthesized via atomic layer deposition (ALD) thin film coating of TiO₂ or ZrO₂ on SiO₂ particles substrate. In the sequential capture-reaction tests, the materials were first exposed to ca. 500 ppmv benzene …

Cyclic Sequential Adsorption Desorption/Thermal-Catalytic Oxidation Of Volatile Organic Compounds: Material Development, Process Advancement/Improvement, And Numerical Modeling, Simulation And Optimization, Busuyi Ojo Adebayo

Doctoral Dissertations

"Volatile organic compounds (VOCs) are a group of useful organic chemicals but when emitted have contributed to air pollution. They affect human health, cause environmental degradation and contaminate our waters and soils, so they need to be controlled. When they exist in dilute concentrations, abatement becomes challenging, thus requiring advanced abatement methods, e.g., sequential adsorption desorption/thermal-catalytic oxidation process. The overall goal of this research was to abate dilute streams of VOCs via the process. The specific objectives were to 1) develop novel adsorbent/catalyst dual-function materials (DFMs) for the process, 2) improve the operability of a one-bed-one-column reactor configuration for the …

Investigation Of Microwave-Assisted Synthesis Of Palladium Nanoparticles Supported On Fe3o4 As Efficient Recyclable Magnetic Catalysts For Suzuki-Miyaura Cross-Coupling, Hany A. Elazab

Chemical and Biochemical Engineering Faculty Research & Creative Works

In this research, a facile and reproducible approach was implemented for the synthesis of palladium nanoparticles supported on Fe₃O₄ with remarkable activity as an ideal catalyst for Suzuki-Miyaura cross-coupling. Magnetite supported Pd nanoparticles reveal high activity in Suzuki-Miyaura coupling reactions since they could be recycled up to seven times with the same high catalytic activity. This adopted method of catalyst synthesis has many advantages, including reproducibility and the reliability of the adopted synthetic method. The produced catalyst has unique magnetic properties to facilitate catalyst recovery from the reaction mixture by using a strong magnet as an external …

Microwave-Assisted Synthesis Of Palladium Nanoparticles Supported On Copper Oxide In Aqueous Medium As An Efficient Catalyst For Suzuki Cross-Coupling Reaction, Hany A. Elazab, M. A. Sadek, Tamer T. El-Idreesy

Chemical and Biochemical Engineering Faculty Research & Creative Works

We report here a reliable green method for the synthesis of palladium nanoparticles supported on copper oxide as a highly active and efficient catalyst for Suzuki cross-coupling reaction. The experimental synthetic approach is based on microwave-assisted chemical reduction of an aqueous mixture of palladium and copper salt simultaneously using hydrazine hydrate as reducing agent. The catalyst was fully characterized using various techniques showing well-dispersed palladium nanoparticles. The catalytic activity and recyclability of the prepared catalyst were experimentally explored in the ligand-free Suzuki cross-coupling reaction with a diverse series of functionalized substrates. The synthesized Pd/CuO catalyst shows many advantages beside its …

The Catalytic Activity Of Copper Oxide Nanoparticles Towards Carbon Monoxide Oxidation Catalysis: Microwave – Assisted Synthesis Approach, Hany A. Elazab

Chemical and Biochemical Engineering Faculty Research & Creative Works

In this research, we report a simple, versatile, and reproducible method for the synthesis of copper oxide nanoparticles via microwave assisted synthesis approach. The important advantage of this catalyst is due to its important role not only in the low temperature oxidation of CO but also in potential applications in pharmaceutical and fine chemical synthesis. The results reveal that the copper oxide catalyst has particularly a remarkable high activity for CO oxidation catalysis as it was found that copper oxide (CuO) catalyst has 100% conversion of carbon monoxide into carbon dioxide at 175 oC. This also could be attributed to …

Engineering Zeolite Catalysts Through Porosity And Surface Acidity Control For Selective Production Of Light Olefins, Xin Li

Doctoral Dissertations

"Zeolites are broadly used as heterogeneous catalysts in various chemical and petrochemical industries to produce value-added chemicals and fuels, mainly due to their large surface area, acid-base properties, high thermal stability, and excellent shape-selectivity. In this dissertation, various zeolite catalysts were engineered through fine-tuning micro-meso-macro-porosity and surface acidity. The engineered zeolites were used as heterogeneous catalysts for production of light olefins such as ethylene and propylene through alcohol dehydration and hydrocarbon cracking reactions.

To control the zeolite porosity and acidity, SAPO-34@ZSM-5 and SAPO-34@Silicalite-1 composites with core-shell structure were synthesized and evaluated in ethanol dehydration reaction. Analysis of catalytic performance revealed …

Atomic Layer Deposition Prepared Nanostructured Materials For Various Catalytic Reactions, Xiaofeng Wang

Doctoral Dissertations

"Atomic layer deposition (ALD) has been widely used for thin film coating and metal nanoparticles (NPs) preparation. In this report, the applications of ALD prepared nanostructured materials in catalysis were examined.

Highly dispersed Pt monometallic catalysts with different substrates and multi-walled carbon nanotubes (MWCNTs) supported Pt-Co bimetallic catalysts were synthesized by ALD for selective hydrogenation of α, β-unsaturated aldehydes to unsaturated alcohols (UA). Pt/MWCNTs showed the highest selectivity of UA in selective hydrogenation of citral, as compared to Pt/SiO₂, Pt/ALD-Al₂O₃, and Pt/γ-Al₂O₃. After adding Co, the highest selectivity was achieved …

The Effect Of Graphene On Catalytic Performance Of Palladium Nanoparticles Decorated With Fe3o4, Co3o4, And Ni (Oh)2: Potential Efficient Catalysts Used For Suzuki Cross—Coupling, Hany A. Elazab, Sherif Moussa, Ali R. Siamaki, B. Frank Gupton, M. Samy El-Shall

Chemical and Biochemical Engineering Faculty Research & Creative Works

Abstract: In this research, we report a scientific investigation of an efficient method used for the synthesis of highly active Palladium Nanoparticles decorated with Fe₃O₄, Co₃O₄, and Ni (OH)2 Supported on Graphene as Potential Efficient Catalysts for Suzuki Cross—Coupling. Pd/Fe₃O₄ nanoparticles supported on graphene nanosheets (Pd/Fe₃O₄/G) showed an excellent catalytic activity for Suzuki coupling reactions and recycled for up to four times without loss of catalytic activity. An efficient magnetic catalyst has been successfully synthesized using a simple, reproducible fast and reliable method using microwave …

Green Synthesis Of Copper Oxide Nanoparticles In Aqueous Medium As A Potential Efficient Catalyst For Catalysis Applications, Waad Mohsen, M. A. Sadek, Hany A. Elazab

Chemical and Biochemical Engineering Faculty Research & Creative Works

In this research, we have developed a reliable green method for the synthesis of copper oxide nanoparticles as a potential efficient catalyst for several catalysis applications. In our experimental approach, microwave-assisted synthesis technique was used in order to perform chemical reduction of copper salt using hydrazine hydrate as a strong reducing agent. The prepared catalyst was characterized using various techniques showing the formation of well dispersed copper oxide nanoparticles. The synthesized Copper oxide catalyst shows many advantages including the use of environmentally benign solvent systems, green synthetic approach, and mild reaction conditions.

Modeling Of Trickle-Bed Reactors With Exothermic Reactions Using Cell Network Approach, Jing Guo, Yi Jiang, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

One-Dimensional (1D) and Two-Dimensional (2D) Cell Network Models Were Developed to Simulate the Steady-State Behavior of Trickle-Bed Reactors Employed for the Highly Exothermic Hydrotreating of Benzene. the Multiphase Mass Transfer-Reaction Model and Novel Solution Method Are Discussed in This Report. the 1D Model Was Shown to Satisfactorily Simulate the Axial Temperature Field Observed Experimentally for Multiphase Flow with Exothermic Reactions. the 2D Reactor Modeling Provided Valuable Information About Local Hot Spot Behavior within the Multiphase Reactor, Identifying Situations in Which Hot Spots May Form. the Model Took into Consideration the Heterogeneous Nature of Liquid Distribution, Including Radial Liquid Maldistribution and …

Catalytic Wet Air Oxidation Of Phenol In Concurrent Downflow And Upflow Packed-Bed Reactors Over Pillared Clay Catalyst, Jing Guo, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

An Experimental Study is Presented for Comparing the Behavior of a Packed Bed Reactor in the Catalytic Liquid-Phase Oxidation of Aqueous Phenol with Two Modes of Operation, Downflow and Upflow. the Operating Parameters Investigated Included Temperature, Reactor Pressure, Gas Flowrate, Liquid Hourly Space Velocity and Feed Concentration. Because of the Completely Wetted Catalyst, the Upflow Reactor Generally Performs Better for High Pressures and Low Feed Concentrations When the Liquid Reactant Limitation Controls the Rate. the Interaction between the Reactor Hydrodynamics, Mass Transfer, and Reaction Kinetics is Discussed. for Both Operation Modes, Complete Phenol Removal and Significant Total Organic Carbon (TOC) …

A Sequential Approach To Modeling Catalytic Reactions In Packed-Bed Reactors, Jing Guo, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

A Sequential Modeling Approach is Proposed to Simulate Catalytic Reactions in Packed-Bed Reactors. the Hydrogenation of Alpha-Methylstyrene and Wet Oxidation of Phenol Are Selected as Studied Cases. the Modeling Scheme Combines a Reactor Scale Axial Dispersion Model with a Pellet Scale Model. Without Involving Any Fitting Parameters, Such an Approach Accounts for the Non-Linear Reaction Kinetics Expression and Different Types of Pellet-Liquid Wetting Contact. to Validate the Developed Modeling Scheme and the Parallel Approach Reported in the Literature, the Experimental Observations for Hydrogenation of Alpha-Methylstyrene to Cumene Have Been Employed. the Predicted Results by Both Approaches Agree Reasonably with the …