Engineering Commons^™

The Influence Of Heat And Mass Transfer On The Setting Rate Of Adhesives Between Porous Substrates, Mubarak Mohammed Khlewee

Electronic Theses and Dissertations

The dynamic penetration of fluid into a porous media where other changes are occurring such as temperature or concentration is of interest to a number of situations. However, little experimental and theoretical analysis of this situation is found in the literature where most of the previously published works have studied the penetration with constant physical properties, where there is no change of the fluid as it enters the pores. This situation is important in the setting of adhesives in porous medium such as in the setting of hot melt and water-based adhesives in the production of paper based packaging. The …

Advanced Materials Design Using Application-Based Processing Techniques, Daniel S. Camarda

Doctoral Dissertations

This dissertation pertains to generating advanced materials using application-based processing techniques. First, billets consisting of PTFE sintering powders are evaluated using Thermomechancal Analysis. It was found that both shape change and volume change are associated with enthalpic and entropic recoil, respectively. These phenomena, due to melting and stored energy during the powder compaction process, were found to be molecular weight dependent. Additionally, kinetics of the recovery and sintering process were found to be slower in blended specimens than pure samples. Next, the creation of graft copolymers by selectively grafting a second polymer to the amorphous fraction of a semi-crystalline polymer …

Developing Strategies To Toughen Bio-Inspired Adhesives, Narelli P. Narciso, Samuel Lee Huntington, Jonathan J. Wilker

The Summer Undergraduate Research Fellowship (SURF) Symposium

Mussels and other marine creatures adhere very well in underwater environments, having the ability to withstand the force of the sea. These animals have inspired synthetic biomimetic adhesives for wet systems, presenting potential for biomedical applications. However, most current commercial adhesives tend to be brittle, not resisting repetitive movements. This study assesses toughening strategies to improve the mussel-inspired adhesives’ ductility while maintaining its strength. The strategies included altering the polymer’s chemical structure by changing the percentage of polyethylene glycol (PEG) in the molecule and by adding fillers, such as calcium carbonate, silica and nacre - a calcium carbonate compound found …

Recent Approaches In Designing Bioadhesive Materials Inspired By Mussel Adhesive Protein, Pegah Kord Forooshani, Bruce P. Lee

Bruce Lee

Marine mussels secret protein-based adhesives, which enable them to anchor to various surfaces in a saline, intertidal zone. Mussel foot proteins (Mfps) contain a large abundance of a unique, catecholic amino acid, Dopa, in their protein sequences. Catechol offers robust and durable adhe-sion to various substrate surfaces and contributes to the curing of the adhesive plaques. In this article, we review the unique features and the key functionalities of Mfps, catechol chemistry, and strategies for preparing catechol-functionalized poly- mers. Specifically, we reviewed recent findings on the contributions of various features of Mfps on interfacial binding, which include coacervate formation, surface …

The Role Of Chain Configuration In Governing The Rational Design Of Polymers For Adhesion, Onyenkachi Wamuo

Doctoral Dissertations

ABSTRACT THE ROLE OF CHAIN CONFIGURATION IN GOVERNING THE RATIONAL DESIGN OF POLYMERS FOR ADHESION SEPTEMBER 2017 ONYENKACHI C. WAMUO, B.Eng., FEDERAL UNIVERSITY OF TECHNOLOGY, OWERRI (FUTO), NIGERIA M.S., UNIVERSITY OF MASSACHUSETTS AMHERST Ph.D., UNIVERSITY OF MASSACHUSETTS AMHERST Directed by: Professor Shaw Ling Hsu The chain configurational control of polymers used in adhesion can be utilized as a means of tuning the cohesive properties of hot melt adhesives (HMAs). The cohesive properties control the solidification, strength, setting speed. Propylene-Ethylene copolymers (PP-co-PE) and thermoplastic polyurethanes (TPUs) were studied. In the first project, the effects of sequence distribution of the two types …

Recent Approaches In Designing Bioadhesive Materials Inspired By Mussel Adhesive Protein, Pegah Kord Forooshani, Bruce P. Lee

Department of Biomedical Engineering Publications

Marine mussels secret protein-based adhesives, which enable them to anchor to various surfaces in a saline, intertidal zone. Mussel foot proteins (Mfps) contain a large abundance of a unique, catecholic amino acid, Dopa, in their protein sequences. Catechol offers robust and durable adhe-sion to various substrate surfaces and contributes to the curing of the adhesive plaques. In this article, we review the unique features and the key functionalities of Mfps, catechol chemistry, and strategies for preparing catechol-functionalized poly- mers. Specifically, we reviewed recent findings on the contributions of various features of Mfps on interfacial binding, which include coacervate formation, surface …

Production Of Lignin-Based Phenolic Resins Using De-Polymerized Kraft Lignin And Process Optimization, Homaira Siddiqui

Electronic Thesis and Dissertation Repository

Commercialization of Lignin-based phenol formaldehyde resins (LPF) has been limited due to the increase in curing temperatures and decrease in adhesive strength of LPF compared to conventional phenolic resins. Lignin depolymerization can increase the reactivity of lignin; however, the effect of lignin molecular weight on curing performance of LPF resins has yet to be investigated. This research work examined the optimization of synthesis parameters including percent substitution of phenol with lignin, formaldehyde- to-phenol ratio (F/P), and Mw of lignin to reduce the curing temperature and increase the adhesive strength of LPF. DSC analysis indicated that lignin with Mw ~1200g/mol resulted …

Plywood Adhesive Development., Edward J. Dowd

Electronic Theses and Dissertations

This thesis is primarily a study of two-step plywood adhesives made with varying amounts of phenol, 1, 3, 5 xylenol, resorcin, and formaldehyde. Each resin was evaluated by using it as the adhesive in making plywood. The plywood was then tested for shear strength and wood failure after a four hour boil.

Procedures are given for making and testing various straight phenolic resins and resins modified with 1, 3, 5 xylenol or resorcin, or comibinations of both of these accelerating resins.

The straight phenolic resins gave boil-proof bonds, but the curing cycle was too long. Those phenolics modified with 1, …

Plywood Adhesive Development., Jesse R. Goza 1922-2013

Electronic Theses and Dissertations

No abstract provided.

Impregnation And Wood Plastics : Ii. Investigations In Marine Glueing., Charles F. Sacra 1921-1985

Electronic Theses and Dissertations

No abstract provided.