Engineering Commons^™

Engineering Lewis Acidic Materials For Biomass Conversion And Battery Applications., Md Anwar Hossain

Electronic Theses and Dissertations

My long-term goal is to develop catalytic systems to produce renewable energy for a sustainable society. The overall research objective of my dissertation is to advance understanding of Lewis acidic materials for (1) conversion of renewable lignin into phenolics and (2) enhanced cycling stability of lithium metal batteries to safely store renewable electricity from wind and solar, thereby laying the groundwork for our transition to a sustainable society. Petroleum is a conventional feedstock for current transportation fuels (gasoline, diesel, and jet fuels). However, petroleum is a finite resource and produces greenhouse gases (CO₂ and CH₄) upon processing, …

Nsf Career Award Supports Schwartz's Research On The Chemical Process For Making Rubber Component, Marcus Wolf

General University of Maine Publications

advance his ongoing dissection of the Lebedev process. The well-known, multi-step chemical reaction is used to make butadiene from biomass-derived ethanol. However, little research has been conducted on the Lebedev process at the molecular level. Understanding the intricacies of this process will help researchers create new catalysts necessary for the chemical reactions to make goods from both petroleum and biomass, that would increase butadiene yield.

Understanding Biomass Upgrading Through Hydrogenolysis Reactions: Kinetics And Mechanism, Jalal Tavana

Electronic Theses and Dissertations

This dissertation involves several hydrogenolysis reactions but is mainly focused on hydrodechlorination (HDC) of chlorobenzene (PhCl) and hydrodeoxygenation (HDO) of 2-furancarboxylic acid (FCA). Hydrodechlorination of PhCl has been the subject of research for some time. Here, we used a Pd/C catalyst to study this reaction though rigorous kinetics and mechanistic analyses in a CSTR reactor. The H₂/D₂ kinetic isotope effect (KIE) experiment revealed that H₂ is not involved in a rate controlling step. The kinetics data are in agreement with similar systems reported before and follow a first-order dependence on chlorobenzene, half order for hydrogen and …

Reaction Kinetics And Mechanism Investigations Of Renewable Chemicals Production From Biomass, Hussein Talib Abdulrazzaq

Electronic Theses and Dissertations

The development of the technologies and the improved processes for the production of high value bio-based chemicals is one of the most important challenges at the present time. This new movement is not only important from an environmental perspective, but also it is a profitable approach to provide affordable and efficient processes. Therefore, the chemical catalytic upgrading processes over various homogenous and heterogeneous catalysis could be an outstanding modification to upgrade biomass-derived platform molecule to high value applications. In this dissertation, we highlight our recent progress in developing new chemistries and processes for upgrading biomass-derived molecules and address the challenges …

Development Of Novel Catalysts For Hydrogen Gas Production From Biomass Compounds, Boanerges Bamaca

Department of Biological Systems Engineering: Dissertations and Theses

Hydrothermal biomass gasification technologies (sub- and supercritical water gasification and aqueous-phase reforming) have considerable economic, environmental, and technical advantages over other energy-extensive technologies (e.g. natural gas reforming) for hydrogen gas production. However, lack of economically feasible and highly active catalysts is a main challenge that impedes upscaling of these technologies for hydrogen gas production.

The goal of this study was to develop innovative, economically feasible and active heterogeneous supported metal catalysts for hydrothermal processes for producing hydrogen gas from biomass-derived compounds. Because of its stable structure and chemical inertness, graphene was used as catalyst support. Graphene supported metal catalysts were …

Development And Characterization Of Robust And Cost-Effective Catalysts For Selective Biomass Upgrading To Fuels And Chemicals By Deoxydehydration, Bryan E. Sharkey

Doctoral Dissertations

The use of biomass-derived ligno-cellulose as a possible alternative source of fuels and chemicals to fossil-based hydrocarbons, however, biomass offers many challenges based on processing and its high oxygen content. One promising upgrading route is deoxydehydration, a reaction which combines a deoxygenation by a sacrificial reductant and dehydration in a single step to selectively convert vicinal diols into an olefin. This reaction is highly selective when using homogeneous oxo-rhenium catalysts, which can easily undergo the necessary changes in coordination and oxidation state, however the high cost of rhenium and difficulty of homogeneous catalyst recovery make these catalysts untenable for large …

Bubble Dynamics In A Sand Fluidized Bed In The Presence Of Biomass Pellets, Nicolas Torres Brauer

Electronic Thesis and Dissertation Repository

Given the worldwide concerns regarding fossil fuel availability, global warming, water, and air pollution and economy needs, there is an urgent requirement to develop and implement alternative energies. Biomass gasification can consume vegetal waste to produce syngas, which is a mix of carbon monoxide, hydrogen, and carbon dioxide. When biomass gasification is carried out in a fluidized bed, the process is highly efficient.

The experimental study of the present Ph.D. dissertation took place in a Plexiglas 0.44 m diameter unit, equipped with a CREC Optiprobe system and a video camera. The unit was filled with 200-900 µm sand particles and …

Characterization Of Catalysts For Hydrodeoxygenation Of Bio-Oils Using Phenol As A Model Compound, Abdulazeez Mohammed Khlewee

Electronic Theses and Dissertations

Due to the environmental considerations, depletion of fossil fuel reserves and fluctuating non-renewable fuel price, converting non-edible lignocellulosic biomass into renewable energy resources has gained significant importance. Phenol has been chosen as a model compound for catalytic screening because it is abundant in bio-oil composition and shows a high resistance to oxygen removal during hydrodeoxygenation (HDO) reactions. HDO of phenol produces chemicals that can be used as transportation fuels (Aromatics) or fuel additives. Theoretically, HDO of phenol has two distinct reduction pathways: direct deoxygenation (DDO) and hydrogenation (HYD). The previous results published by our group showed a precedent activity and …

The Role Of Surface Area In Catalytic Gasification Of Biomass, Elizabeth A. Wachs, Nitish Kumar, Indraneel Sircar, Prithviraja Basak, Jay P. Gore Phd

The Summer Undergraduate Research Fellowship (SURF) Symposium

Gasification of biomass has the potential to provide a carbon-negative source of liquid fuels. The current limited use of gasification is due in part to the high temperatures necessary to achieve high conversion levels. These temperatures can be lowered by the use of catalysts, but the mechanisms by which catalysts affect the reaction rate are not fully understood. Here, the structural component of potassium carbonate’s role in the gasification process was examined. Samples of pinewood sawdust were impregnated with potassium carbonate, then pyrolyzed with N2 in a fixed bed reactor at 750°C (heater thermocouple reading). Half of the char was …

Optimization Of Mixing In A Simulated Biomass Bed Reactor With A Center Feeding Tube, Michael T. Blatnik

Masters Theses 1911 - February 2014

Producing gasoline-type fuels from lignocellulosic biomass has two advantages over producing alcohol-type fuels from plant sugars: gasoline has superior fuel characteristics and plant lignin/cellulose does not compete with human food supplies. A promising technology for converting lignocellulose to fuel is catalytic fast pyrolysis (CFP). The process involves injecting finely ground biomass into a fluidized bed reactor (FBR) at high temperatures, which reduce the biomass to gases that react inside the catalyst particles. This entails complex hydrodynamics to efficiently mix a stream of biomass into a catalyst bed that is fluidized by a separate stream of inert gas. Understanding the hydrodynamics …

Determination Of Kinetic Parameters From The Thermogravimetric Data Set Of Biomass Samples, Karol Postawa, Wojciech M. Budzianowski

Wojciech Budzianowski

This article describes methods of the determination of kinetic parameters from the thermogravimetric data set of biomass samples. It presents the methodology of the research, description of the needed equipment, and the method of analysis of thermogravimetric data. It describes both methodology of obtaining quantitative data such as kinetic parameters as well as of obtaining qualitative data like the composition of biomass. The study is focused mainly on plant biomass because it is easy in harvesting and preparation. Methodology is shown on the sample containing corn stover which is subsequently pyrolysed. The investigated sample show the kinetic of first order …

Optimization Of A Dynamic Hot Water Pretreatment Of Switchgrass Using Catalysis By Carbonation To Maximize Carbochemical Yields, Rohit Tanaji Dhamdere

Graduate Theses and Dissertations

A bio-refinery is a facility that converts renewable bio-resources into value-added chemicals and products. In this context of a bio-refinery, the production of the carbochemicals such as HMF, furfural and organic acids illustrate that multiple products can be produced from a renewable source such as lignocellulosic biomass (switchgrass). Traditionally, carbochemicals such as furfural and HMF are produced using inorganic acids such as H2SO4, HCL, and H3PO4. The use of such acids requires the application of high cost materials of construction such as Hastelloy-C, titanium etc.

The objective of this study is to develop a semi-continuous process for the conversion of …

Catalytic Steam Gasification Of Biomass Surrogates: A Thermodynamic And Kinetic Approach, Enrique Salaices

Electronic Thesis and Dissertation Repository

Gasification of biomass is an environmentally important technology that offers an alternative to the direct use of fossil fuel energy. Steam gasification is getting increased attention as a potential source of renewable energy since it produces a gaseous fuel suitable for industrial applications in highly efficiently power/heat energy production, transport fuel, and as a feedstock for chemical synthesis. Furthermore, catalytic steam gasification has other advantages hence (i) it produces a gas with higher heating value; (ii) it reduces the diluting effect of N2 from air; (iii) it eliminates the need of cleaning, upgrading and/or conditioning the product gas for certain …