Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 9 of 9

Full-Text Articles in Engineering

Seasonal Aeration Rates For The Eastern United States Based On Long-Term Weather Patterns, Michael D. Montross, Samuel G. Mcneill, Thomas C. Bridges Sep 2004

Seasonal Aeration Rates For The Eastern United States Based On Long-Term Weather Patterns, Michael D. Montross, Samuel G. Mcneill, Thomas C. Bridges

Biosystems and Agricultural Engineering Faculty Publications

Most aeration fans are sized to produce a minimum airflow rate of 0.1 m3/min/t (0.1 cfm/bu) in on-farm grain storage structures. At this airflow rate a significant amount of time is required to move a cooling front completely through a bin. The desired grain temperature and prevailing weather conditions will have a significant effect on required fan size. Thirty years of weather data were analyzed for the eastern United States to determine the amount of time available in temperature windows between 0 to 15.C and 0 to 17.C. Contour maps were generated with ArcMap 8.3 for the percentage …


Vertical Wall Loads In A Model Grain Bin With Non-Axial Internal Inserts, Marek Molenda, Michael D. Montross, Jozef Horabik, Sidney A. Thompson Sep 2004

Vertical Wall Loads In A Model Grain Bin With Non-Axial Internal Inserts, Marek Molenda, Michael D. Montross, Jozef Horabik, Sidney A. Thompson

Biosystems and Agricultural Engineering Faculty Publications

A study was conducted to estimate the degree of load asymmetry in a bin with non-axial internal inserts. Internal inserts in the form of an annulus segment were attached to the wall, and their influence on vertical wall loads during centric filling and discharge in a model bin were measured. Wall and floor loads were measured in a corrugated-wall model grain bin with a diameter of 2.44 m and a height of 7.3 m filled with soft red winter wheat to a depth of 6.7 m (height-to-diameter ratio of 2.75). Tests were conducted with inserts that extended circumferentially 30°, 60°, …


Post-Tier Rail And Typar® Or Metal-Covered Tobacco Field Curing Structures, George A. Duncan Jul 2004

Post-Tier Rail And Typar® Or Metal-Covered Tobacco Field Curing Structures, George A. Duncan

Agricultural Engineering Extension Publications

Tobacco producers are rapidly adopting field curing structures with several variations in construction materials and methods. They are looking to lower costs and increase efficiency by installing structures that require less maintenance and last longer.

Two recently designed structures appear to provide more permanent options for producers who dislike the tedious tasks of covering and securing the plastic over the tobacco during the curing season. Both structures use two-rail-wide, two-post wooden construction, but they differ in their roof coverings. One uses Typar®, and the other uses metal.


Effect Of Moisture Content And Broken Kernels On The Bulk Density And Packing Of Corn, Samuel G. Mcneill, Sidney A. Thompson, Michael D. Montross Jul 2004

Effect Of Moisture Content And Broken Kernels On The Bulk Density And Packing Of Corn, Samuel G. Mcneill, Sidney A. Thompson, Michael D. Montross

Biosystems and Agricultural Engineering Faculty Publications

Shelled yellow dent corn samples were conditioned to three moisture content levels (12%, 15%, and 18% w.b.) and mixed with a prescribed amount of broken corn particles of known size (geometric mean diameter of 1.0, 1.4, 2.0, 2.8, and 4.0 mm) and concentration (2.5%, 5.0%, and 7.5% by weight) levels. The initial bulk density and grain compaction under simulated overburden pressure tests were determined for each sample. Uniaxial compression tests were performed for seven vertical pressure levels (3.4, 6.9, 14, 28, 55, 110, and 165 kPa) with a minimum of three replications each. Tests were performed at two locations with …


Suitability Of A Gps Collar For Grazing Studies, Carmen T. Agouridis, Timothy S. Stombaugh, Stephen R. Workman, Benjamin K. Koostra, Dwayne R. Edwards, Eric S. Vanzant Jul 2004

Suitability Of A Gps Collar For Grazing Studies, Carmen T. Agouridis, Timothy S. Stombaugh, Stephen R. Workman, Benjamin K. Koostra, Dwayne R. Edwards, Eric S. Vanzant

Biosystems and Agricultural Engineering Faculty Publications

The traditional means of tracking animal location in a field is by visual observation. Not only is this method labor intensive, it is also prone to error as the observer can alter cattle movement, observation periods are often too short to obtain confidence in general daily behavior patterns, and observer fatigue becomes an issue. In the 1990s, the University of Kentucky began using GPS collars on cattle to track their position with the goal of incorporating this information into cattle management practices. One of the key unanswered questions regarding the GPS collars is the accuracy of the position data recorded …


Effect Of Stover Fraction On Glucose Production Using Enzymatic Hydrolysis, Czarena L. Crofcheck, Michael D. Montross May 2004

Effect Of Stover Fraction On Glucose Production Using Enzymatic Hydrolysis, Czarena L. Crofcheck, Michael D. Montross

Biosystems and Agricultural Engineering Faculty Publications

Corn stover was fractionated into three fractions: cobs, stalks, and leaves and husks. The fractions were dried and ground through a 2 mm screen. Samples of the three fractions and whole corn stover with and without NaOH pretreatment were subjected to enzymatic hydrolysis in order to determine the effect of fractionation on glucose production. The average amounts of glucose released after 60 h of hydrolysis from pretreated cobs, leaves and husks, stalks, and whole stover were 0.50, 0.36, 0.28, and 0.36 g/g dry biomass, respectively. The average amounts of glucose released after 60 h of hydrolysis from nonpretreated cobs, leaves …


The Influence Of Environmental Temperature And Substrate Initial Moisture Content On Aspergillus Niger Growth And Phytase Production In Solid−State Cultivation, Seaborn B. Carter, Sue E. Nokes, Czarena L. Crofcheck May 2004

The Influence Of Environmental Temperature And Substrate Initial Moisture Content On Aspergillus Niger Growth And Phytase Production In Solid−State Cultivation, Seaborn B. Carter, Sue E. Nokes, Czarena L. Crofcheck

Biosystems and Agricultural Engineering Faculty Publications

Aspergillus niger is being used commercially for phytase production utilizing solid-state cultivation; however, no studies have been published that investigated the optimal environmental temperature and initial substrate water content to maximize fungal growth and/or phytase production. Solid-state cultivations of Aspergillus niger on wheat bran and soybean meal were conducted at three temperatures (25°C, 30°C, and 35°C) and three initial moisture contents (50%, 55%, and 60% wet basis) in a split-plot full-factorial experimental design. Fermentations were conducted for 0, 24, 48, 72, and 120 h. The containers were sampled destructively and assayed for phytase activity and glucosamine concentration as an estimate …


Using Covers To Minimize Odor And Gas Emissions From Manure Storages, José R. Bicudo, David R. Schmidt, Larry D. Jacobson Feb 2004

Using Covers To Minimize Odor And Gas Emissions From Manure Storages, José R. Bicudo, David R. Schmidt, Larry D. Jacobson

Agricultural Engineering Extension Publications

Odor emissions from animal production sites are typically the leading cause of nuisance complaints. Locating facilities far from neighbors is often a solution to the odor problem, but this is not always an option for producers. Most often, reducing odor emissions from the farm is the only option available.


Statistical Procedures For Evaluating Daily And Monthly Hydrologic Model Predictions, Marilyn E. Coffey, Stephen R. Workman, Joseph L. Taraba, Alex W. Fogle Jan 2004

Statistical Procedures For Evaluating Daily And Monthly Hydrologic Model Predictions, Marilyn E. Coffey, Stephen R. Workman, Joseph L. Taraba, Alex W. Fogle

Biosystems and Agricultural Engineering Faculty Publications

The overall study objective was to evaluate the applicability of different qualitative and quantitative methods for comparing daily and monthly SWAT computer model hydrologic streamflow predictions to observed data, and to recommend statistical methods for use in future model evaluations. Statistical methods were tested using daily streamflows and monthly equivalent runoff depths. The statistical techniques included linear regression, Nash-Sutcliffe efficiency, nonparametric tests, t-test, objective functions, autocorrelation, and cross-correlation. None of the methods specifically applied to the non-normal distribution and dependence between data points for the daily predicted and observed data. Of the tested methods, median objective functions, sign test, autocorrelation, …