Open Access. Powered by Scholars. Published by Universities.®
- Keyword
-
- Aeroacoustics (1)
- Aerodynamics (1)
- Bicycle (1)
- Blowout (1)
- Bluff body (1)
-
- CFD (1)
- Cfd (1)
- Cooling (1)
- Cylinder (1)
- Deflagration (1)
- Ellipses (1)
- Featured (1)
- Features (1)
- Flame acceleration (1)
- Flame extinction (1)
- Flow Control (1)
- Flow instabilities (1)
- Fluid mechanics (1)
- Impingement (1)
- Jet impingement (1)
- Karlovitz number (1)
- Multi-jet impingement (1)
- Oval (1)
- PIV (1)
- Plasma Actuator (1)
- Strouhal number (1)
- Tandem Cylinders (1)
- Turbine (1)
- Turbulence (1)
- Turbulent interaction (1)
Articles 1 - 8 of 8
Full-Text Articles in Engineering
An Optimization Study Of Small-Scale Propeller Blade, Fahad M. Nabid
An Optimization Study Of Small-Scale Propeller Blade, Fahad M. Nabid
Honors Undergraduate Theses
This research paper aims to investigate the optimization of smaller propeller blades to achieve maximum efficiency by studying the effect of the twist angle on reducing drag, increasing thrust, and preventing rapid wear on the blade. Inefficient propellers consume a significant amount of energy, particularly during low-speed flights. The low Reynolds number regime challenges aviation engineers to design propellers with the highest possible efficiency to minimize energy losses. The primary objective of this thesis is to optimize smaller propeller blade shapes to enable them to produce maximum efficiency. The advanced ratio of a propeller blade heavily influences the blade's performance …
The Numerical Study Of Aeroacoustics Performance Of Wings With Different Wavelength Leading-Edge Tubercles, Youjie Zhang
The Numerical Study Of Aeroacoustics Performance Of Wings With Different Wavelength Leading-Edge Tubercles, Youjie Zhang
Honors Undergraduate Theses
The leading-edge tubercle is a type of airfoil modification that inspired by the humpback whale. It was found that the aerodynamic performance of the wing would increase compared to the wing without tubercles. In the past several years, a lot of numerical and experimental studies have been accomplished to explore this leading-edge modification. Besides the aerodynamic performance change, this research explores the aeroacoustics behavior of airfoils with leading-edge tubercles. A numerical study based on Computational Fluid Dynamics (CFD) is established, and simulations using Star CCM are accomplished based on reasonable set-ups. The airfoil chosen to create the wing is NACA …
The Effects Of Supersonic Reacting Flow Over A Wedge, Taylor R. Brown
The Effects Of Supersonic Reacting Flow Over A Wedge, Taylor R. Brown
Honors Undergraduate Theses
There is a growing need for a fundamental understanding of how detonations are formed and sustained as propulsion technology advances toward the use of detonation-based engines. The deflagration-to-detonation transition (DDT) phenomenon is studied to better understand both the fundamentals of detonation physics and the conditions surrounding how detonations are formed and sustained. This research aims to study the effects of a wedge on DDT and detonation formation. A hydrogen-air mixture is pumped into a chamber and ignited by a spark plug. Turbulence-driven flame acceleration is induced by turbulators in the chamber through which the flame propagates. The flame then flows …
Bicycle Wheel Aerodynamics Predictions Using Cfd: Efficiency Using Blade Element Method, Drew Vigne
Bicycle Wheel Aerodynamics Predictions Using Cfd: Efficiency Using Blade Element Method, Drew Vigne
Honors Undergraduate Theses
The cycling industry has long relied on expensive wind tunnel testing when designing aerodynamic products, particularly in the context of wheels which account for 10 to 15 percent of a cyclist's total aerodynamic drag. With the recent advent of Computational Fluid Dynamics (CFD), the industry now has an economical tool to supplement the wheel design process; however, the complex nature of rotating spoked wheels requires high resolution meshes to model at acceptable fidelity. This research investigates an alternative CFD method that lowers the computational cost of modeling aerodynamic bicycle wheels by modeling spokes using Blade Element Method (BEM). Two CFD …
Mechanisms Of Lean Flame Extinction, Ian M. Lasky
Mechanisms Of Lean Flame Extinction, Ian M. Lasky
Honors Undergraduate Theses
Lean flame blowout is investigated experimentally within a high-speed combustor to analyze the temporal extinction dynamics of turbulent premixed bluff body stabilized flames. The lean blowout process is induced through fuel flow reduction and captured temporally using simultaneous high-speed particle imaging velocimetry (PIV) and CH* chemiluminescence. The evolution of the flame structure, flow field, and the resulting strain rate along the flame are analyzed throughout extinction to distinguish the physical mechanisms of blowout. Flame-vortex dynamics are found to be the main driving mechanism of flame extinction; namely, a reduction of flame-generated vorticity coupled with an increase of downstream shear layer …
Flow Control Of Tandem Cylinders Using Plasma Actuators, Jonah Larsen
Flow Control Of Tandem Cylinders Using Plasma Actuators, Jonah Larsen
Honors Undergraduate Theses
The flow over a set of tandem cylinders at a moderate Reynolds numbers (Re), and with different separation lengths has been studied. Two dimensional (2D) and three-dimensional (3D) plasma actuators were used to control the flow over the leading cylinder to change the vortex shedding, and subsequently the flow on the second cylinder. The 3D plasma actuator was segmented along the length of the cylinder with a spacing of λ = 4 while the 2D actuator simply ran straight down the span of the cylinder. Particle image velocimetry (PIV) measurements were used to investigate the flow along the central plane …
An Experimental Investigation Of Heat Transfer For Arrays Of Impingement Jets Onto The Featured Surfaces With Cylindrical And Elliptical Raised Surfaces, Marc A. Medina
Honors Undergraduate Theses
This study focuses on multi-jet impingement for gas turbine geometries in which the objective is to understand the influence of the roughness elements on a target surface to the heat transfer. Current work has proven that implementing roughness elements for multi-jet impingement target surfaces has increased heat transfer ranging anywhere from 10-30%. This study has chosen to investigate three different roughness elements, elliptical in cross-section, to compare to smooth surface geometries for multi-jet impingement. An experimental was taken for this study to extend the current knowledge of multi-jet impingement geometries and to further understand the heat transfer performance. A temperature …
Flame-Turbulence Interaction For Deflagration To Detonation, Jessica Chambers
Flame-Turbulence Interaction For Deflagration To Detonation, Jessica Chambers
Honors Undergraduate Theses
Detonation is a high energetic mode of pressure gain combustion that exploits total pressure rise to augment high flow momentum and thermodynamic cycle efficiencies. Detonation is initiated through the Deflagration-to-Detonation Transition (DDT). This process occurs when a deflagrated flame is accelerated through turbulence induction, producing shock-flame interactions that generate violent explosions and a supersonic detonation wave. There is a broad desire to unravel the physical mechanisms of turbulence induced DDT. For the implementation of efficient detonation methods in propulsion and energy applications, it is crucial to understand optimum turbulence conditions for detonation initiation. The study examines the role of turbulence-flame …