Education Commons^™

Community College Engineering Degree Partnerships With 4-Year Universities, Jeffrey Mark Stear

Electronic Theses and Dissertations

Increasing the number of STEM professionals and reducing inequities in STEM are national priorities. Community colleges are important to address these concerns because they represent a higher percentage of underrepresented minority (URM) and women students. However, students starting 4-year STEM degrees in community college have had a lower completion rate. Partnerships between community colleges and 4-year universities have the potential to improve success for community college students, but more research is necessary. The purpose of this ex post facto, quantitative, correlational study was to determine the relationships among participation in different types of partnerships between community colleges and 4-year universities, …

Exploring Science And Engineering Practices In Children’S Picture Books, Derrick A. Nero, Kathleen Everts Danielson

Michigan Reading Journal

This article features an annotated bibliography of children’s books that illustrate engineering concepts tied to the Next Generation Science Standards (NGSS) Science and Engineering Practices for K-2 students (National Science Teaching Association -NSTA, n.d., see Appendix A) and NGSS K-2 Engineering Design performance expectations (NSTA, n.d., see Appendix B). The selected children’s books encourage discussion and model the process of inquiry and problem solving that may inspire young children to explore STEM (Science, Technology, Engineering, and Mathematics) questions of their own.

Bbt Acoustic Alternative Top Bracing Cadd Data Set-Norev-2022jun28, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set consists of an overview presentation (PDF-formatted) file and companion video (MP4) and CADD files (DWG & DXF) for laser cutting the ETSU-developed alternate top bracing designs and marking templates for the STEM Guitar Project’s BBT (OM-sized) standard acoustic guitar kit. The three (3) alternative BBT top bracing designs in this release are
(a) a one-piece base for the standard kit's (Martin-style) bracing,
(b) 277 Ladder-style bracing, and
(c) an X-braced fan-style bracing similar to traditional European or so-called 'classical' acoustic guitars.

The CADD data set for each of the three (3) top bracing designs includes …

Bbt Side Mold Assy, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set covers the design and fabrication information of the ETSU Guitar Building Project’s BBT (OM-sized) Side Mold Assy for use with the STEM Guitar Project’s standard acoustic guitar kit. The extended 'as built' data set contains an overview file and companion video, the 'parent' CADD drawing, CADD data for laser etching and cutting a drill &/or layout template, CADD drawings in AutoCAD .DWG and .DXF R12 formats of the centerline tool paths for creating the mold assembly pieces on an AXYZ CNC router, and support documentation for CAM applications including router bit specifications, feeds, speed, multi-pass …

3 Stem Projects By Fares Soliman, Fares Soliman

STEM Month

My name is Fares Soliman. I am a fourth grade student from John Hill School Boonton NJ. I created a 3 STEM project. The first project that I made was a doll. I used pink yarn for the dress and brown yarn for the hair. I also used a round wooden ball for the face. The second project that I created was a diorama of a farm. I put some grass, trees, a barn, hay sticks, some animals, a bridge, a fence, some plastic food and corn for the crop. My third project was a diorama of a park. It …

Stem For All Showcase Report, Bruce G. Bukiet, James M. Lipuma

STEM Month

This article and the associated STEM for all showcase submission video (https://www.youtube.com/watch?v=Clps427rdDc) was presented at the NSF 2021 STEM FOR ALL COVID, Equity & Social Justice Conference, May 11-18.

This article provides a description of the development of the STEM in your Home project in the STEM for Success initiative.

Making Makers: Tracing Stem Identity In Rural Communities, Jessie Nixon, Andy Stoiber, Erica Halverson, Michael Dando

Journal of Pre-College Engineering Education Research (J-PEER)

In this article, we describe efforts to reduce barriers of entry to pre-college engineering in a rural community by training local teens to become maker-mentors and staff a mobile makerspace in their community. We bring a communities of practice frame to our inquiry, focusing on inbound and peripheral learning and identity trajectories as a mechanism for representing the maker-mentor experience. Through a longitudinal case study, we traced the individual trajectories of five maker-mentors over two years. We found a collection of interrelated factors present in those students who maintained inbound trajectories and those who remained on the periphery. Our research …

Seventh-Grade Students' Use Of Heat Transfer Conceptions During An Engineering Design-Based Stem Integration Curriculum, Emilie A. Siverling, Tamara J. Moore

Integrated Engineering Department Publications

As the integration of STEM becomes increasingly important in pre-college education, it is important to study models of STEM integration. One model, engineering design-based STEM integration, has shown promising results in terms of student science content learning. This study’s purpose was to explore one student team’s use of heat transfer conceptions as they participated in an engineering design-based STEM integration curriculum. A case study research design, along with procedures from qualitative content analysis, were used to identify scientific and alternative conceptions that the seventh-grade students communicated during the unit. The main result is that the students spoke and wrote about …

Inclusion & Marginalization: How Perceptions Of Design Thinking Pedagogy Influence Computer, Electrical, And Software Engineering Identity, Sarah L. Rodriguez, Erin E. Doran, Rachel E. Friedensen, Elizabeth Martínez-Podolsky, Paul S. Hengesteg

Faculty Publications

Engineering identity plays a vital role in the persistence of engineering students, yet limited research exists on how particular pedagogical approaches influence engineering identity at the college level. This qualitative case study explored how undergraduate student perceptions of design thinking pedagogy influence computer, electrical, and software engineering identity. The study found that design thinking pedagogy reinforces the recognition of an engineering identity, particularly for those from historically marginalized groups (i.e., women, people of color). Intentional implementation, including organization and framing of design thinking pedagogy, was an essential foundation for fostering student interest in the course and connecting to their role …

Do After-School Robotics Programs Expand The Pipeline Into Stem Majors In College?, Cathy Burack, Alan Melchior, Matthew Hoover

Journal of Pre-College Engineering Education Research (J-PEER)

One result of the growing concerns over the numbers of young people moving into science, technology, engineering and mathematics (STEM)-related careers has been the expansion of formal and informal STEM education programming for pre-college youth, from elementary school through high school. While the number of programs has grown rapidly, there is little research on their long-term impacts on participant education and career trajectories. This paper presents interim findings from a multi-year longitudinal study of three national after-school robotics programs that engage students in designing, building, and competing complex robots with the goal of inspiring long-term interest in STEM. Focusing on …

Elementary School Student Development Of Stem Attitudes And Perceived Learning In A Stem Integrated Robotics Curriculum, Yu-Hui Ching, Dazhi Yang, Sasha Wang, Youngkyun Baek, Steve Swanson, Bhaskar Chittoori

Educational Technology Faculty Publications and Presentations

Robotics has been advocated as an emerging approach to engaging K-12 students in learning science, technology, engineering, and mathematics (STEM). This study examined the impacts of a project-based STEM integrated robotics curriculum on elementary school students’ attitudes toward STEM and perceived learning in an afterschool setting. Three elementary school teachers and 18 fourth to sixth graders participated in an eight-week-long program. Quantitative and qualitative data were collected and analyzed, and showed students’ attitudes toward math improved significantly at the end of the robotics curriculum. Three specific areas of learning were identified, including STEM content learning and connection, engagement and perseverance, …

Slime Bash Social: A Tactile Manipulative For Child And Youth Play, Joyce A. Levingston, Marie E. Adebiyi, Brian Hadley, Younis Al-Hassan, Dongyub Back, Michelle Cook, Christopher R. Edginton

Journal of STEM Arts, Crafts, and Constructions

The play product of slime has gained increasing popularity amongst children and youth throughout the United States. Slime can be thought of as a tactile manipulative that can be shaped, stretched, expanded, lumped together, twisted, squeezed, squashed, folded, rolled, shredded, twirled, swirled, pounded, and cut or pulled apart. As a learning tool, slime can and does support STEM initiatives and programs. Slime can be created using simple ingredients that are easily measured, combined, and prepared by children and youth. In addition, slime can incorporate components such as glitter, beads, shaving cream, color dyes and other items. This paper offers an …

Disciplinary Learning From An Authentic Engineering Context, Catherine Langman, Judith Zawojewski, Patricia Mcnicholas, Ali Cinar, Eric Brey, Mustafa Bilgic, Hamidreza Mehdizadeh

Journal of Pre-College Engineering Education Research (J-PEER)

This small-scale design study describes disciplinary learning in mathematical modeling and science from an authentic engineeringthemed module. Current research in tissue engineering served as source material for the module, including science content for readings and a mathematical modeling activity in which students work in small teams to design a model in response to a problem from a client. The design of the module was guided by well-established principles of model-eliciting activities (a special class of problem-solving activities deeply studied in mathematics education) and recently published implementation design principles, which emphasize the portability of model-eliciting activities to many classroom settings.

Two …

Instilling An Entrepreneurial Mindset In A New Generation Of First-Year Engineering Students Through A Graphics Course Project, Lulu Sun, Leroy Long Iii

Publications

Each year, an increasing number of engineering start-up companies emerge in the U.S. and around the world. Innovation and entrepreneurship have never been so pronounced, especially in science, technology, engineering, and mathematics (STEM) fields. How can we train engineering students to be more entrepreneurially-minded so they are well-equipped to become global innovators? Engineering educators can use entrepreneurially-minded learning activities to help students develop an entrepreneurial mindset, which is a set of beliefs, attitudes, and behaviors. At a mid-sized Southeastern private institution, we used an open-ended team project and an end-of-semester poster competition within a freshman-level engineering graphics course to encourage …

Making Connections: Evaluation Of A Professional Development Program For Teachers Focused On Stem Integration, Judy Lambert, Carmen Cioc, Sorin Cioc, Dawn Sandt

Journal of STEM Teacher Education

This article reports on a 2-year evaluation of a STEM integration professional development (PD) program for 40 math, science, and special education teachers in Grades 5–9 from a large Midwestern public school district. The National Research Council’s framework for integrated STEM education (Honey, Pearson, & Schweingruber, 2014) was used to explain the goals, outcomes, nature and scope, and implementation of the program. Teachers were measured on their growth in STEM content knowledge, technology integration, teaching confidence, pedagogical beliefs, and impact of PD. Increases resulted in all these areas with statistically significant improvements in most of them, particularly in Year 2. …

Motivational Decline And Recovery In Higher Education Stem Courses, Anna M. Young, Paul J. Wendel, Joan M. Esson, Kathryn M. Plank

Education Faculty Scholarship & Creative Works

Decline in student motivation is a concern for STEM education, especially for underrepresented groups in the sciences. Using the Science Motivation Questionnaire II, 41 foundational STEM courses were surveyed at the beginning and end of each semester in an academic year at a small primarily undergraduate university. Significant pre- to post-semester declines were observed in each of five measured motivational factors (Intrinsic motivation, Career motivation, Self determination, Self-efficacy, and Grade motivation), with effect sizes ranging from 0.21 to 0.41. However, in the second semester pre-survey, four motivational factors rebounded, including three returning to initial levels, suggesting that the observed motivational …

Anatomy Of Stem Teaching In North American Universities, Paul J. Wendel, Joan M. Esson, Kathryn M. Plank, Anna M. Young

Education Faculty Scholarship & Creative Works

A large body of evidence demonstrates that strategies that promote student interactions and cognitively engage students with content lead to gains in learning and attitudinal outcomes for students in science, technology, engineering, and mathematics (STEM) courses. Many educational and governmental bodies have called for and supported adoption of these student centered strategies throughout the undergraduate STEM curriculum.

Infographic: Institutional Barriers To Black And Latino Male Collegians’ Success In Engineering And Related Stem Fields, Leroy L. Long Iii, William Wanyagah

Publications

Infographic was created to support the article Institutional Barriers to Black and Latino Male Collegian's Success in Engineering and Related Stem Fields, which can be read here:

Virginia Technology And Engineering Education Association 1978-2018: Celebrating Six Decades Of Progress, Ron Vickers, Philip A. Reed, George R. Willcox

STEMPS Faculty Publications

(First Paragraph) Technology and engineering education in Virginia and the nation is coming to a crossroads. Recent growth in state directives, new courses, and ever-changing funding for science, technology, engineering, and mathematics (STEM) education influences the supply of Technology Education teachers, leading to what some say is a dire future for our profession and association. This history is gathered to emphasize the importance and value of what we teach in Virginia public schools. It also captures who was involved with the association leadership over the years.

Approaches To Integrating Engineering In Stem Units And Student Achievement Gains, Elizabeth A. Crotty, Selcen S. Guzey, Gillian H. Roehrig, Aran W. Glancy, Elizabeth A. Ring-Whalen, Tamara J. Moore

Journal of Pre-College Engineering Education Research (J-PEER)

This study examined different approaches to integrating engineering practices in science, technology, engineering, and mathematics (STEM) curriculum units. These various approaches were correlated with student outcomes on engineering assessment items. There are numerous reform documents in the USA and around the world that emphasize the need to incorporate engineering into science education. The authors of this study contend that different approaches to integrating engineering in STEM units correlate to larger student achievement gains in engineering, based on assessment items developed from the Framework for Quality K–12 Engineering Education (Moore, Glancy, Tank, Kersten, & Smith, 2014). The goal of this work …

The Engineering Admissions Partnership Program: A Navigation Strategy For Community College Students Seeking A Pathway Into Engineering, Marcia R. Laugerman, Mack C. Shelley, Steven K. Mickelson, Diane T. Rover

Diane Rover

This paper presents the evaluation of a program designed to improve transfer outcomes for community college students pursuing an engineering degree. The program, the Engineering Admissions Partnership Program (E-APP), was designed to improve the navigational success of community college transfer students through connections to the university. These connections include coordinated academic advising, peer-mentoring, campus visits, and online social and professional networks. The objective of the study is to determine the efficacy of the E-APP and its interventions, which will be measured by increased participation rates and increased university retention rates for E-APP participants. Outcome data for the students are analyzed …

Impacts Of Professional Development In Integrated Stem Education On Teacher Self-Efficacy, Outcome Expectancy, And Stem Career Awareness, John Geoffrey Knowles

Purdue Polytechnic Doctoral Dissertations

This research analyzed the effects of teacher professional development and lesson implementation in integrated Science, Technology, Engineering, and Math (STEM) on: 1.) Teacher self-efficacy and their confidence to teach specific STEM subjects; 2.) Teaching outcome expectancy beliefs concerning the impact of actions by teachers on student learning; and 3.) Teacher awareness of STEM careers. High school science and technology education teachers participating in the Teachers and Researchers Advancing Integrated Lessons in STEM (TRAILS) project experimental group attended a ten-day summer professional development institute designed to educate teachers in using an integrated STEM education model to implement integrated STEM lessons. The …

Students Explore Fossil Creatures Of The Cambrian Period Burgess Shale Through Model-Making, Andrea Anderson, Ksenia Zhbanova, Phyllis Gray, Jolene K. Teske, Audrey C. Rule

Journal of STEM Arts, Crafts, and Constructions

This practical article features an arts-integrated science unit on fossils of the Burgess Shale for fourteen elementary/ middle school students at a weeklong summer day camp. The day camp had a theme of recycling, reduction and reuse; all of the fossil models had substantial recycled components to support this theme. Next Generation Science Standards were supported by the course activities in which students examined fossil specimens, images, and comparative modern relatives to determine the anatomy and lifestyles of Burgess Shale Cambrian Period fossil animals (e.g., Olenoides trilobites, Anomalocaris, Canadaspis, Opabinia, Wiwaxia, Hallucigenia) through making scientific …

Ecosystem Food Web Lift-The-Flap Pages, Dana L. Atwood-Blaine, Audrey C. Rule, Hannah Morgan

Journal of STEM Arts, Crafts, and Constructions

In the lesson on which this practical article is based, third grade students constructed a “lift-the-flap” page to explore food webs on the prairie. The moveable papercraft focused student attention on prairie animals’ external structures and how the inferred functions of those structures could support further inferences about the animals’ diets. In general, most students made simple causal connections between an animal’s observable characteristics and the food it would probably eat. Some students were also able to make multi-agent connections to develop a more complex mental model of a food web. Ultimately, the lift-the flap project was engaging to students …

Flipping About The Sun And Its Pattern Of Apparent Motion, Crystal Betts, Allison Pattee

Journal of STEM Arts, Crafts, and Constructions

Arts integration has shown to enhance student comprehension, retention, and engagement, while connecting to rich science content. The integration of the Next Generation Science Standards and the National Arts Standards into a first grade lesson illustrated how the arts enhanced the students’ understandings of the sun’s apparent motion during the day, an idea that is difficult for many young children to grasp. In this project students explored the sun outdoors throughout the school day to document changes by tracing their shadows in chalk and by making a shadow clock. Students also applied the information they learned to the creation of …

Editorial: The Journal Of Stem Arts, Crafts, And Constructions As An Ideal Venue For Showcasing Application Of The Next Generation Science Standards, Dana L. Atwood-Blaine

Journal of STEM Arts, Crafts, and Constructions

The Journal of STEM Arts, Crafts, and Constructions is an ideal venue for disseminating new ideas, lessons, and research developed in response to the Next Generation Science Standards (NGSS). This editorial explains how arts integration is well-suited to addressing the Science and Engineering Practices and the Cross-cutting Concepts. The research articles in this issue provide evidence that arts integration is also effective at improving student retention of disciplinary content over time. Using specific examples from the articles in this issue, this editorial elaborates on the three-dimensional nature of NGSS and how the integration of arts, crafts, and constructions into science …

Work Integrated Learning In Stem In Australian Universities: Final Report: Submitted To The Office Of The Chief Scientist, Daniel Edwards, Kate Perkins, Jacob Pearce, Jennifer Hong

Kate Perkins

The Australian Council for Educational Research (ACER) undertook this study for the Office of the Chief Scientist (OCS). It explores the practice and application of Work Integrated Learning (WIL) in STEM, with a particular focus on natural and physical sciences, information technology, and agriculture departments in Australian universities. The project involved a detailed ‘stocktake’ of WIL in practice in these disciplines, with collection of information by interview, survey instruments, consultation with stakeholders and literature reviews. Every university in Australia was visited as part of this project, with interviews and consultation sessions gathering insight from more than 120 academics and support …

Developing A Faculty Learning Community To Support Writing Across Different Stem Disciplines, Vukica M. Jovanovic, Denise Tombolato-Terzic, Daniel P. Richards, Pilar Pazos, Megan Mckittrick, Julia Romberger, Otilia Popescu

Engineering Technology Faculty Publications

Writing to learn is one of the very important pedagogical strategies in a variety of disciplines. This concept is not specifically addressed in the majority of engineering courses. Hence, university initiatives such as the Quality Enhancement Plan (QEP), emerging out of accreditation and institutional assessments, are focusing on infusing scholarship from other disciplines (in this case English) for the purpose of student learning improvement. Engineering and Science programs do include various courses in English Composition as the part of the curriculum; however, writing is not embedded in all discipline-specific courses at the upper-division level. The program outlined here focuses on …

The Peec Experiment: Native Hawaiian And Native American Engineering Education, Suzette R. Burckhard, Joanita M. Kant

Civil and Environmental Engineering Faculty Books

PART I: Context
1. Engineering for Native nations: Origins and goals of the Pre-Engineering Education Collaboratives (PEECs)
PART II: Culture matters
2. Recognizing history: Indigeneity matters
3. Moving beyond cultural sensitivity: Developing culturally responsive programs for and with Native engineers
4. Invoking cultural relevance at tribal colleges: Grandmother’s way is important
5. Discovering what works: STEM pedagogy and curriculum development for Native Americans
6. Exploring indigenous science and engineering: Projects with indigenous roots
PART III: Providing support for Natives in Engineering
7. Finding an Engineering identity: A Native American PEEC leader’s experience
8. Outreaching to K-12 and tribal schools in …

Designing Sewn Circuits And Stem Self-Efficacy In Middle School Girls, Kara Kaiser

Graduate Theses and Dissertations

The purpose of this study is to determine if the experience of designing and sewing LilyPad Arduino circuits in crafts projects can increase middle school girls’ STEM self-efficacy. Boys STEM self-efficacy will also be assessed to determine if LilyPad Arduino circuits can also increase boys’ STEM self-efficacy. Researchers have been wondering why there is a male dominance in STEM (science, technology, engineering and mathematics) fields and why some women do not have a particular interest in these subjects. There are several reasons this could happen; stereotypes conveyed to them by parents and/or teachers, they genuinely are not interested in STEM …