Education Commons^™

Integrating Information Into The Engineering Design Process, Michael Fosmire, David Radcliffe

Purdue University Press Books

Engineering design is a fundamental problem-solving model used by the discipline. Effective problem-solving requires the ability to find and incorporate quality information sources. To teach courses in this area effectively, educators need to understand the information needs of engineers and engineering students and their information gathering habits. This book provides essential guidance for engineering faculty and librarians wishing to better integrate information competencies into their curricular offerings. The treatment of the subject matter is pragmatic, accessible, and engaging. Rather than focusing on specific resources or interfaces, the book adopts a process-driven approach that outlasts changing information technologies.

After several chapters …

An Investigation Of The Asit Problem-Solving Method On Middle School Technology Education Student's Ability To Produce Creative Solutions, Jared Aaron Merrill

Theses and Dissertations

This study compared two groups of students being instructed in various methods of problem solving over a two-week period. The control group was instructed using the standard Career and Technology Education (CTE) Introduction curriculum on using brainstorming to solve problems. The treatment group was instructed using a structured problem solving method developed to help focus problem solving on finding a solution that satisfies the conditions. Students were selected from 7th grade students at a suburban middle school in Utah. The independent variable in this study was the type of problem solving instruction received. The dependent variables of interest were the …

Bridging The Gap Between Engineering Design And Pk-12 Curriculum Development Through The Use The Stem Education Quality Framework, Margaret Pinnell, James Rowley, Sandi Preiss, Rebecca P. Blust, Rebecca Beach, Suzanne Franco

Mechanical and Aerospace Engineering Faculty Publications

This paper will describe a unique partnership among the Department of Teacher Education and School of Engineering at the University of Dayton (UD) and the Dayton Regional STEM Center (DRSC). This partnership resulted in the development of the STEM Education Quality Framework (SQF), a tool to guide educators in teaching, learning and refining STEM education. The SQF resulted in a variety of educational tools, including a STEM curriculum template, that was implemented in the DRSCs teacher professional development and curriculum development program entitled the STEM Fellow Program. The STEM Fellow program was later modeled in a unique, NSF sponsored six …

Defining Characteristics Of An Integrated Stem Curriculum In K-12 Education, Vinson Robert Carter

Graduate Theses and Dissertations

The purpose of the study was to obtain consensus concerning the defining characteristics of integrated STEM (Science, Technology, Engineering, and Mathematics) curriculum. This study utilized a three round modified Delphi study to solicit recommendations from experts of STEM education in order to: 1) create a set of categorical and defining curricular components needed to develop and implement appropriate integrated STEM curriculum; 2) identify the characteristics that set integrated STEM education curriculum apart from single-discipline curricula; 3) discuss the components necessary to gauge whether an initiative, project, or curriculum should be referred to as integrated STEM education; and 4) examine whether …

Why Do Indiana Pre-Service Technology Education Majors Choose The Profession, Traves L. Freeland

Purdue Polytechnic Masters Theses

The purpose of this descriptive study was to look at the factors that influence pre-service technology education majors to choose to become teachers. The pre-service teachers of three Indiana technology education teacher preparatory programs were given an internet survey to collect demographic data and determine what factors influence current pre-service teachers. The results of this study were compared to the results from a study done by Harris (2007). The findings resulted in similar factors that were the most common identified as being influential. Those factors included personal interest or hobbies, high school or middle school teacher, and past experiences in …

Curriculum Exchange: “Make Your Own Earthquake”, Sandra Seale, Thalia Anagnos, Lelli Van Den Einde

Faculty Publications

A consortium of American universities is involved in earthquake engineering practice and research. Each campus of the consortium participates in outreach and education activities for the local schools and the public. One campus of the consortium, which operates earthquake field sites, designed a K-12 activity called “Make Your Own Earthquake” (MYOE). MYOE involves setting up earthquake field equipment (seismic instruments, data loggers, and computers) in a classroom. Children jump for 10 seconds, see their earthquake trace live on a computer screen and then take home a printed copy of their personal earthquake. Software was developed specifically for this activity. MYOE …

Quantitative Assessment Of Program Outcomes Using Longitudinal Data From The Fe Exam, Joe C. Guarino, James R. Ferguson, V. Krishna C. Pakala

Mechanical and Biomedical Engineering Faculty Publications and Presentations

There have been many studies providing details on using results from the Fundamentals of Engineering (FE) exam as metrics for meeting ABET program outcomes¹. However, implementing an FE-based set of metrics poses challenges not limited to assessing validity of results. Programs using FE-based metrics must also determine the position of the metrics in the overall assessment process. We present a method for using FE-based metrics as an integral part of the ABET program assessment process. The principle issues we address are: (1) The validity of using FE metrics for a group of graduating students when not all of …

Curriculum Exchange: Visualization Tools And Online Courses For Teaching About Earthquakes, Sandra Seale, Thalia Anagnos

Faculty Publications

As part of a national consortium of universities practicing and doing research in earthquake engineering, our site has developed several videos for use in outreach and education. Visualization tools are extremely useful when teaching about how earthquakes shake the ground and the response of buildings to that shaking. Here we present videos that are targeted to specific audiences: (1) Animations of the response of two model buildings to two earthquakes are targeted at grade 6-16 students. The videos were created with data recorded on these test structures from the two earthquakes. The two events were both located directly below the …

The Arrows In Our Backs: Lessons Learned Trying To Change The Engineering Curriculum, Steven W. Villachica, Anthony Wayne Marker, Donald Plumlee, Linda Huglin, Amy Chegash

Organizational Performance and Workplace Learning Faculty Publications and Presentations

Published research has provided a robust set of documented tools and techniques for transforming individual engineering courses in ways that use evidence-based instructional practices. Many engineering faculty are already aware of these practices and would like to use them. However, they still face significant implementation barriers. The E²R2P effort addresses the question: How can successes in engineering education research translate into widespread instructional practice?

This poster session will describe hard-won lessons the E²R2P team has learned as it begins its third year attempting such curricular change.

Lesson 1: “Wonder workshops” and visible course redesigns don’t produce …

Assessing Student And Employer Satisfaction In A Liberal Arts/Engineering Bachelor Of Arts Degree, Michael Haungs

Michael Haungs

No abstract provided.

How Important Is The Wow Factor In First Year Engineering Courses?, Thalia Anagnos, Burford Furman, Ping Hsu, Patricia Backer

Faculty Publications

This paper discusses the effectiveness of using projects with a “wow factor,” that is, engaging and challenging hands-on projects, in a freshman engineering course to motivate studentretention and persistence in engineering. Our course enrolls approximately 700 students per year in a lecture/laboratory format. Our university, a large comprehensive public university in thewest, has offered a freshman introduction to engineering course since 1992. In its original form, the course was part of a lower division engineering core, required of all engineering majors, and focused on computational skills (spreadsheets and MATLAB).In 1997, based on faculty and student feedback, a task force was …

Anatomy Of An “Instruction Plan”: Information Literacy, Abet Lifelong Learning, And The Engineering Curriculum, Debbie Morrow

Debbie Morrow

Planning library instruction to help disciplinary departments meet accreditation is a strong way for academic libraries to demonstrate value. During 2012 the Liaison Librarians at Grand Valley State University undertook a new initiative to develop “instruction plans” for each of our liaison departments. The goal of a departmental instruction plan is to profile the curriculum in a discipline and strategically identify prospective courses for offering library instructional support where the greatest number of students can experience the most benefit, relevant to specific assignments and discipline-specific skill areas. The plan also captures specific information literacy core competencies that the librarian plans …

Pstat: Promoting Sustainable Transportation Among Teens, Jordan Bryner, Yi Ying Chin, Candice Patton, Rebekah Patton, Christopher Stanfill, Rick Wheeler, Jeffrey Keith Clark Ii, Paul Frymier, Chris Cherry, David Irick, Leon Tolbert

Faculty Publications and Other Works -- Chemical and Biomolecular Engineering

Can an innovative, team-based, hands-on design and construction project involving high school students change their attitudes and personal preferences for transportation to favor lower impact modes? This was the main question PSTAT (Promoting Sustainable Transportation Among Teens) sought to answer. Since the last decade, global climate change has fuelled increased development of alternative transportation modes that have lesser impact on the environment. However, society is not embracing the change with open arms. Therefore, there is a critical need for a paradigm shift, which could be especially timely for teen-aged students starting to adopt their own personal transportation preferences. By exposing …

An Engineering Design Stem Project: T-Shirt Launcher, Todd D. Fantz, Melva R. Grant

STEMPS Faculty Publications

Technology education has the potential to be the glue for integrating science, technology, engineering, and mathematics (STEM) education through the use of the design process. This should result in increased student interest in science and math, resulting in increased standardized science and math scores (Silk, C. Schunn, & Strand, 2009). In order for this to happen, students need to integrate their grade-level mathematics and science content knowledge in their technology and/or engineering design (Tran & Nathan, 2010). Hopefully, this can be accomplished without losing student interest generated by hands-on, kinesthetic learning. This article provides one example of getting technology education …

Integrating Emotional Attachment And Sustainability In Electronic Product Design, Alex Lobos, Callie W. Babbitt

Articles

Current models for Information and Communication Technology (ICT) products encourage frequent product replacement with newer versions that offer only minor incremental improvements. This pattern, named planned obsolescence, diminishes user experience and shortens product lifespan. This paper presents the conceptual basis for a two-part integrated approach to combating planned obsolescence in ICT devices. First, design for emotional attachment, which creates products that users enjoy, value, and use for longer. Second, technological adaptability, which anticipates product upgrades and repairs as new technologies emerge. A model interdisciplinary design course in industrial design and sustainability, also described herein, trains students to apply this approach …

Online Resource Aiding Students To Practice And Perfect Manufacturing Based Skills, Robert Martin Morris, Frank Dunne, Maurice Collins

Conference papers

As part of our teaching in the Departments of Fabrication and Transport Engineering in the Technological University Dublin we use industrial metal folding machines to help students to learn the sequencing of folds on manufactured sheet metal components. Many students have difficulty visualising the folding sequences required to complete practical manufacturing assignments. This paper details the digital media resource which was developed to provide students with the opportunity to offer a proposed solution to questions which relate to the folding sequence required for these components. Feedback is provided through the medium of pre recorded videos which show the component being …

Teaching Technical Engineering Courses From A Christian Perspective: Two Examples, Charles C. Adams

Pro Rege

Engineering professors, like those of the natural sciences, usually teach by breaking the subject matter into parts, that is, courses and activities that are logically abstract from each other. While together comprising a coherent whole, those individual parts too easily foster abstractionism, the view that such subjects as calculus, fluid mechanics, engineering design, and engineering ethics “really are” separable from one another. Such a view militates against a Christian perspective of engineering, technology, and reality in general by replacing the organic wholeness of life before the face of God with the compartmentalization that is characteristic of modern science and naturalism. …

Engineering, Martin K. Wallace

Library Staff Publications

This chapter describes a standards-based framework of information literacy instruction (ILI) for undergraduate engineering students. It begins by identifying characteristics of information literacy that are most relevant to the engineering curriculum, framed by a review of the ACRL’s Information Literacy Standards for Science and Engineering/Technology. Recommendations for delivering ILI to undergraduate engineering students are given, drawing from a pilot program for integrating information literacy into the Mechanical Engineering Technology (MET) program at the University of Maine. Finally, assessment strategies for ILI curricula are provided, based on examples from the MET pilot. Throughout the chapter, core engineering information resources are identified, …

Using Architecture Pedagogy To Enhance Engineering Education, Shannon M. Chance, Mike Murphy, Gavin Duffy, Brian Bowe

Shannon M. Chance

Based on evidence, numerous advisory boards and scholars insist engineering education must change (NSB, 2007; McKenna, Froyd, King, Litzinger, & Seymour, 2011) and that hands-on, inquiry-driven, project-based learning pedagogies can enhance STEM education (Boyer & Mitgang, 1996). These pedagogies have formed the core of architectural education since the Renaissance and have been in continuous use since that time. As such, engineering educators can benefit from observing how architecture students learn and understanding how they are taught. Likewise, architecture can benefit from applying the group-based learning strategies employed by engineering teachers who use studentcentered, project-based pedagogies. Trans-disciplinary approaches hold particular merit.

Out-Of-Classroom Experiences: Bridging The Disconnect Between The Classroom, The Engineering Workforce, And Ethical Development, Brian A. Burt, Donald D. Carpenter, Matthew A. Holsapple, Cynthia J. Finelli, Rob M. Bielby, Janel A. Sutkus, Trevors S. Harding

Brian Burt A.

The extant research on engineering ethics instruction shows that students receive ethics instruction within the engineering curricula. Unfortunately, the methods used in engineering undergraduate classrooms are described as ‘‘abstract’’ and have mixed results related to impacting students’ ethical development. Thus, exploring how out-of-classroom experiences—as a curricular alternative—influences students’ ethical development is warranted. This is an exploratory investigation to determine how out-of-classroom experiences influence students’ ethical development. The authors define ethical development using three constructs: knowledge of ethics, ethical reasoning, and ethical behavior. We draw upon a conceptual model that suggests students’ ethical development is impacted by what takes place inside …

Elec 2110: Elements Of Electrical Engineering—A Peer Review Of Teaching Project Benchmark Portfolio, Mahmoud Alahmad

UNL Faculty Course Portfolios

I have been teaching this class for the last five years. As an introductory course to electrical engineering, there is a lot of material that needs to be covered. All the material is important and relevant, and I try to go in-depth in each topic area. This approach has resulted in overwhelming the students and made them struggle with the course content, application and utilization. As I consider this course for the peer review, I am evaluating the depth of each topic and the opportunity to adjust the approach and method used to introduce new concepts and at the same …

Theoretical Foundations For Effective Stem Learning Environments, Aran W. Glancy, Tamara J. Moore

School of Engineering Education Working Papers

No abstract provided.

Graduate School Of Engineering And Management 2013-2014 Catalog, Graduate School Of Engineering And Management, Air Force Institute Of Technology

AFIT Documents

The Graduate Catalog represents the offerings, programs, and requirements in effect at the time of publication.

Product Lifecycle Management: Measuring What Is Important - Product Lifecycle Implementation Maturity Model, Abram Walton, Cynthia Tomovic, Michael Grieves

STEMPS Faculty Publications

Industry reports that benefits of PLM are difficult to assess because the same benefit can be expressed as a function of time, cost, quality, or any combination. Based on a review of the PLM literature in an earlier study, a PLM Process Model and an initial list of PLM related metrics was generated and later confirmed through interviews with experienced PLM users. In the current study, the original PLM Process Model was refined and the list of metrics was subjected to an exploratory factor analysis in which specific metrics were found to be related to one of four factors: Inputs, …

Perceptions Of New Doctoral Graduates On The Future Of The Profession, John Ritz, Gene Martin

STEMPS Faculty Publications

Advancement of a profession relies heavily on the participation of its members. Leadership roles must be filled at many levels. To effectively prepare future leaders, efforts must be undertaken to educate and mentor them both about their professions and how to lead within them. The authors sought to identify the perceptions of those who recently earned a doctoral degree with focus on technology and engineering education. In the past, this group developed and assumed major roles in leading their education professions. This study reports on new doctoral graduates’ perceptions related to the focus of content taught in formalized K-12 technology …

Influence Of Stem Education And Technology In Selecting Food And Agriculture Careers, Joan Hegerfeld-Baker

Electronic Theses and Dissertations

Currently market forces identify a growing need for professionals in food safety related careers. The investigation studied influential factors guiding students to choose career paths. Careers connected to the safety of the food supply require professionals with undergraduate and graduate degrees related to science, technology, engineering or math (STEM). Preparing and attracting students to post-secondary institutions needs greater attention to meet the demands of the food and agriculture industry. The investigation focused on college students and high school teachers. Students in three colleges (Arts and Sciences, Agriculture and Biological Sciences, and Education and Human Sciences) offering STEM and non-STEM majors …

Don't Just Cover The Engineering Design Process, Patent It!, Philip A. Reed

STEMPS Faculty Publications

The article discusses the importance of understanding intellectual property (IP) concept for students of engineering design process. It highlights that IP classification are of four types which includes patent, trademarks and copyright. The article further offers brief information on process of obtaining a utility patent for technological inventions.