Technology and Innovation Commons^™

Towards A Center For Modeling And Simulation: The Case For Jordan, Ghaith Rabadi, Hazem Kaylani, Joseph Barjis (Ed.), Murali Mohan Narasipuram (Ed.), Ghaith Rabadi (Ed.), Jolita Ralyt (Ed.), Pierluigi Plebani (Ed.)

Engineering Management & Systems Engineering Faculty Publications

Modeling and Simulation (M&S) has recently become an important area that is pursued by many researchers and practitioners due to the role it plays in understanding complex systems and problems. We have therefore witnessed the establishment of many M&S organizations in the last two decades especially in the more developed world. Less developed countries are starting to recognize the need for such capability especially that the problems they face are not less complex. In this paper, we present a preliminary study towards a business plan for establishing a scientific center for Modeling, Analysis, Simulation and Animation in Jordan (JoSAMA) and …

The Impact Of Task Conflict On Virtual Team Performance And Cohesiveness, Wilawan Onkman, Anil Ustun, Pilar Pazos, Ana Maria Canto

Engineering Management & Systems Engineering Faculty Publications

This paper examined the impact of task conflict on team performance and cohesiveness. Twelve virtual teams participated in two sessions with two difficulty levels. Each task consisted of a survival simulation. Teams communicated using a text-based communication media (chat). A mixed methods approach combining both quantitative and qualitative data was used. Performance was measured using expert ratings, and cohesiveness was measured using a modified version of Seashore's Cohesiveness Index. Content analysis was utilized to evaluate the level of task conflict on the team. This study provides some initial evidence on the effects task conflict on virtual team performance.

Nrel: A Year In Clean Energy Innovations: A Review Of Nrel's Feature Stories, National Renewable Energy Laboratory

Publications (E)

The National Renewable Energy Laboratory (NREL) is the nation’s primary laboratory for renewable energy and energy efficiency research and development.

NREL’s mission and strategy are focused on advancing the U.S. Department of Energy’s and our nation’s energy goals. The laboratory’s scientists and researchers support critical market objectives to accelerate research from scientific innovations to market-viable alternative energy solutions. At the core of this strategic direction are NREL’s research and technology development competencies. These areas span from understanding renewable resources for energy, to the conversion of these resources to renewable electricity and fuels, and ultimately to the use of renewable electricity …

Simpler Packaging, Tomiko Oden

Graphic Communication

This project explains how product packaging is become more "green", and thus more simple. Packaging needs to go beyond just simplifying materials and graphics - it needs to create a simpler process in order to reduce wasted time, energy, and resources.

Measurement And Analysis Of Shocks To Products Packaged In Pails In Single Parcel Ground Shipments, Sher Paul Singh, Jay Singh, Pakapol Kittipinyovath

Industrial Technology and Packaging

The objective of this study was to measure and analyse the shocks and impacts experienced by pails in the single parcel distribution environment, with and without a secondary corrugated shipper. The study was conducted in the FedEx Ground shipping environment in the USA. Instrumented 5 gal pails were shipped with and without an outer corrugated box, and with and without handling (precautionary warning) labels, from East Lansing, Michigan to destinations in California and New York. Data recorders were used to collect and analyse shock distribution data (drop heights, drop orientations and number of drops). The results showed that the precautionary …

Agenda: World Energy Justice Conference And Appropriate Technology Arcade, University Of Colorado Boulder. Center For Energy & Environmental Security, University Of Colorado Boulder. School Of Law

World Energy Justice Conference (October 23-24)

The 2009 CEES Energy Justice Conference took place at the University of Colorado Law School on October 23rd and 24th, 2009. It featured 11 sessions, more than 40 speakers, and attracted over 200 attendees. The Conference brought together leading international and U.S. decision-makers in politics, engineering, public health, law, business, economics, and innovators in the sciences to explore how best to address the critical needs of the energy-oppressed poor (EOP) through long-term interdisciplinary action, information sharing, and deployment of appropriate sustainable energy technologies (ASETs).

The Colorado Journal of International Environmental Law & Policy (CJIELP) at the University of Colorado Law …

Wireless Networks: Automated Frequency Distribution, Management & Assignment (Afdma) In Ieee 802.16, Khurram Shehzad, A. Ali, F. Rasool, R. M. Hashmi, A. Zubair, R. L. Ali

International Conference on Information and Communication Technologies

Frequency is amongst the most exclusive and most costly resources in wireless communication networks, especially, while considering the demands of broadband wireless access (BWA). In BWA, the management of frequency distribution and its effective utilization is of utmost importance. This research explores possible ways to ensure the most effective allocation of bandwidth resources and their best possible utilization on need basis. The model for static frequency allocation has been optimized and the dynamic frequency management has been calculated while dividing the users in different user classes on the basis of their needs and requirements. The effect of ping-pong handovers has …

Networks - I: Networks-On-Chip: Challenges, Trends And Mechanisms For Enhancements, Omer Tayan

International Conference on Information and Communication Technologies

The rate of increase of silicon capacity in integrated circuits (IC) will enable system integration of several billion transistors to reside on a single chip in the near future. Future system-on-chip (SoC) systems must therefore integrate up to several hundreds of cores within a single chip, and SoC designs will employ on-chip communication networks (NoCs) as a result. This paper discusses the problems with many current SoC systems, surveys the challenges and trends facing future SoC designs and proposes a mechanism for enhancing NoC strategies of the future by enhancing memory management and utilization techniques within an NoC.

Artificial Intelligence – I: Subjective Decision Making Using Type-2 Fuzzy Logic Advisor, Owais Malik

International Conference on Information and Communication Technologies

In this paper, we present and compare two-stage type-2 fuzzy logic advisor (FLA) for subjective decision making in the domain of students' performance evaluation. We test our proposed model for evaluating students' performance in our computer science and engineering department at HBCC/KFUPM in two domains namely cooperating training and capstone/senior project assessment where we find these FLAs very useful and promising. In our proposed model, the assessment criteria for different components of cooperative training and senior project are transformed into linguistic labels and evaluation information is extracted into the form of IF-THEN rules from the experts. These rules are modeled …

Automated Fixture Design For A Rapid Machining Process, Wutthigrai Boonsuk, Matthew C. Frank

Faculty Research & Creative Activity

Rapid prototyping techniques for CNC machining have been developed in an effort to produce functional prototypes in appropriate materials. One of the major challenges for rapid machining is to develop an automatic fixturing system for securing the part during the machining process. The method proposed in this paper is the use of sacrificial fixturing, similar to the support structures in existing rapid processes like Stereolithography. During the machining process, sacrificial supports emerge incrementally and, at the end of the process, are the only entities connecting the part to the stock material. This paper presents methodologies for the design of sacrificial …

Automated Fixture Design For A Rapid Machining Process, Wutthigrai Boonsuk, Matthew Frank

Faculty Research & Creative Activity

Rapid prototyping techniques for CNC machining have been developed in an effort to produce functional prototypes in appropriate materials. One of the major challenges for rapid machining is to develop an automatic fixturing system for securing the part during the machining process. The method proposed in this paper is the use of sacrificial fixturing, similar to the support structures in existing rapid processes like Stereolithography. During the machining process, sacrificial supports emerge incrementally and, at the end of the process, are the only entities connecting the part to the stock material. This paper presents methodologies for the design of sacrificial …

Heat Transfer Correlations For Low Approach Evaporative Cooling Systems In Buildings, Ben Costelloe, Donal Finn

Articles

The experimental performance of an open industrial scale cooling tower, utilising small approach temperature differences (1–3 K), for rejection of heat at the low water temperatures (11–20 °C) typical of chilled ceilings and other sensible air–water heat dissipation systems in buildings, is examined. The study was carried out under temperate maritime climatic conditions (3–18 °C wet-bulb temperature range). Initially a theoretical analysis of the process at typical conditions for this climate was conducted, which indicated that a water to air (L/G) mass flow rate ratio of less than 1.0 was required for effective operation. Consequently for these low L/G ratios, …

Egypt's Information Society Strategy: A Critical Lexicography, Neil Mcbride, Bernd Carsten Stahl

Journal of International Technology and Information Management

The development of ICT policies within developing countries in the past ten years has opened up a new area for study. These documents chart the ambitions of the countries for the use of ICT to promote rapid development. As such they are intercultural documents, developing at the interface between the culture of the country and western economic culture. This paper develops a critical approach to understanding these documents and studying their message. The approach involves the preparation of a critical dictionary which identifies relevant terms within the ICT policy document and reflects on their multiple meanings. The approach was applied …

Usability Investigation Of E-Business Web-Based Forms, Gerald V. Post, Albert Kagan, Betsy Page Sigman

Journal of International Technology and Information Management

Usability on Web sites is critical because almost no training is provided for users on commercial sites. Instead, Web design relies on standards and consistency across sites. Traditional usability results indicated that computer forms should follow paper-based forms. Yet, Web paradigms have evolved that are quite different from paper-based forms. Specifically, this study reveals that users commit fewer errors and prefer simple forms limited to a single concept per screen. This conclusion significantly alters the recommendations for designing business forms.

Formal Verification Of Urban Traffic System Using The Concept Of Fuzzy Workflow Simulation, Manuj Darbari, Abhay Kumar Srivastava, Sanjay Medhavi

Journal of International Technology and Information Management

Modeling complex urban traffic system requires extensive use of workflow methodologies which can simulate almost real time traffic situations. Number of studies were done in the field of Urban Traffic Simulation like PLOTS, NETSIM and PALAMICS but none of them could provide a real formal solution. Our paper proposes a methodology using Fuzzy Petri nets for modeling real time traffic system. Fuzzy Petrinets are also visualised and tested by using Flow- Charter and HPSIM software packages. These packages help in providing successive iterations of process model for further refinement.

Supporting The Virtual Community: Social Bookmarking As A User- Based Classification Scheme In A Knowledge Library, Nicole Lytle, Tony Coulsom

Journal of International Technology and Information Management

Knowledge libraries hold the promise of widespread access to information available anywhere, anytime, freeing patrons from the geographical and temporal boundaries that currently exist. The classification of materials and subsequent searching of knowledge library content is an overall problem with many complex parts. Relevant classification is important for optimal information retrieval. This is especially important for the virtual communities that exist with extended organizations. Rooted in the virtual community and digital library literature, this paper develops a theory for improving the information classification and retrieval process of knowledge libraries that support virtual communities by applying social bookmarking techniques.

Rapid Development Of Multimedia Instructional Modules For Information Technology Education, Nanda Ganesan

Journal of International Technology and Information Management

A multifaceted learning model was developed for implementing e-learning in a largely commuter campus. The primary objective of the model was to build a flexible learning environment that combined the learning effectiveness of in-class learning with the flexibility and accessibility of online learning. One of the components of the model was the multimedia instructional modules produced to teach various Information Technology courses. Several different types of modules were produced representing chalk-and-talk type of lectures, PowerPoint presentations and software tutorials. The chalk-and-talk type of lecture modules and the software tutorials that emulated the in-class learning experience contributed positively towards enhancing the …

Can Information Systems Foster Emotional Intelligence? A Design Theory-Based Approach, Richard J. Burkhard, Thomas A. Horan, Brian N. Hilton, Michael Leih

Journal of International Technology and Information Management

Researchers in Information Systems (IS) have conducted extensive research into various kinds of collaboration systems over the last twenty-five years. A parallel stream of inquiry in psychology and management has developed research in organizational Emotional Intelligence, which contributes to the effectiveness of group interactions by increasing cooperation and reducing conflict. Collaboration systems present a special opportunity to introduce soft management functions such as Emotional Intelligence because they are designed as an intelligent channel of interaction between group members. This research used an Information Systems Design Theory approach to guide the integration of Emotional Intelligence functions into collaboration systems. Two artifact …

Business Risks: When Is Fails To Detect Circumvention Activities, Stanley X. Lewis Jr., J. Scott Magruder, Eddy J. Burks, Carl Smolinski

Journal of International Technology and Information Management

A business must recognize and address various risk factors when establishing and maintaining its information system. The overall risk to management is that the control environment does not protect proprietary business data and the financial reporting system that produces financial statements and other information used by investors, creditors and regulatory agencies. These risks require that management implement efforts to ensure the integrity and effectiveness of control procedures over business activities while being aware of additional system issues such as failing to adequately consider other risks which are more business-oriented including the risk of failing to prevent or detect fraudulent or …

Continuous-Flow, Rapid Lysis Devices For Biodefense Nucleic Acid Diagnostic Systems, Robert W. Doebler, Barbara Erwin, Anna Hickerson, Bruce Irvine, Denice Woyski, Ali Nadim, James D. Sterling

Business and Information Technology Faculty Research & Creative Works

Two mechanical lysis devices have been developed as compact, robust components to provide rapid sample preparation for nucleic acid diagnostic systems. One such component, known as the Micro Bead-Beater™ (μBB™, BBTM, Claremont BioSolutions, Upland, CA), is a compact device that is capable of ultrarapid lysis (>90% lysis in 30 s) of micro volumes (< 80 μL) of Bacillus spores in a continuous-flow format or in a disposable single-tube format. The μBB is also capable of processing much larger volumes of solutions containing spores or vegetative cells using a continuous-flow mode. A second mechanical lysis device designed as a disposable component is the microfluidic bead blender, which uses a small electric motor to spin vanes within the bead-laden solution. DNA quantification results using dsDNA-binding fluorescence dyes and real-time PCR are presented, comparing the lysis of Bacillus subtilis spores using the μBB™ with other well-known lysis techniques. Nanoscale imaging results obtained using scanning electron microscopy and transmission electron microscopy on B. subtilis spores lyzed using the μBB™ are also presented. © 2009, Society for Laboratory Automation and Screening. All rights reserved.

Organizational Agility, James D. Sterling

Business and Information Technology Faculty Research & Creative Works

No abstract provided.

Ala Spotlight Series V.2, James D. Sterling

Business and Information Technology Faculty Research & Creative Works

No abstract provided.

The Research On Container Operations At Container Freight Station And Rfid Implementation, Kasarla Naga Chandra Mohan

World Maritime University Dissertations

No abstract provided.

Research On Information Integration Of Zhoushan Port And Its External Environment, Peiyao Lu

World Maritime University Dissertations

No abstract provided.

Labevolution: What's The Next Mutation?, James D. Sterling

Business and Information Technology Faculty Research & Creative Works

No abstract provided.

Building Benchmarks, James D. Sterling

Business and Information Technology Faculty Research & Creative Works

No abstract provided.

Off And Running, James D. Sterling

Business and Information Technology Faculty Research & Creative Works

No abstract provided.

Moment Analysis Of Near-Equilibrium Binding Interactions During Electrophoresis, Yousef Daneshbod, James D. Sterling, Ali Nadim

Business and Information Technology Faculty Research & Creative Works

The electrophoretic transport of three chemically reacting species, two of which can bind reversibly to form the third, is analyzed mathematically. The species are assumed to move horizontally through a long channel with different electrophoretic mobilities and diffusion coefficients. By considering small perturbations of the system about equilibrium or when one of the two binding species is much more abundant than the other, the governing advection-reaction- diffusion equations can be linearized and studied via the method of moments. The result is a set of coupled ordinary differential equations for the moments that can be solved analytically. Analysis of the long-time …

Building National Digital Infrastructure: A Case Study Of Semiconductor Complex Limited, Deepak Kappor

Business Review

The digital revolution and the rapid technology developments thereafter created a real danger of the modem world getting divided into a new type of 'digital-haves and digital-have not's'. It was feared that developing countries like India may not be able to reap the benefits of the 'information age' because of the ever widening gap in technology and relevant infrastructure. As a strategic step to bridge the growing digital divide between India and the technologically advanced economies, the Government of India (GO I) decided to set up Semiconductor Complex Limited (SCL) in the year 1983 to develop Indian capabilities in the …

Nanofibrous Articles, Gene Kim, Bonnie Bachman, Stephen O. Bozzone

Economics Faculty Research & Creative Works

Nanofibrous articles can be manufactured by a process that includes preparation of a surface of a substrate to provide an adhesion mechanism for securing the nanofibers to the surface. The nanofibers can be dispersed in an area near the substrate for the purpose of being adhered to the surface. If an ordered arrangement of nanofibers is required, an electric field can be provided in the area where the nanofibers are dispersed to selectively control an ordering of the nanofibers as they are adhered to the surface by the adhesion mechanism.