Technology and Innovation Commons^™

Table Of Contents Jitim Vol 29 Issue 2, 2020

Journal of International Technology and Information Management

Table of contents

Scenario-Based Strategic Planning For Future Civil Vertical Take-Off And Landing (Vtol) Transport, Woojin Choi, Steven Hampton

Journal of Aviation/Aerospace Education & Research

Rapid evolvement of the vertical take-off and landing (VTOL) technology in conjunction with recent robust R&D has demonstrated the technical feasibility of the civil VTOL system as a short-haul mass transit mode. Its combined benefits of a helicopter and a turboprop into one aircraft is expected to become an effective remedy for congested air traffic and difficulties with airport expansions in the metropolitan areas along with the potential benefit to improve accessibility to population centers and remote areas where conventional aircraft cannot access.

In this study, based on a the Political, Economic, Social, Technological, Environmental, and Legal (PESTEL) factors and …

3d Printing Technology On Spare Parts Business Supply Chain Management: A Case Study In Appliance Industry, Salih Boysan

Dissertations and Theses @ UNI

This study investigates the effects of using Additive Manufacturing (AM), also known as 3D printing, to produce spare parts within the supply chain of an appliance manufacturing company.

This research is based on an analysis of the operation of a spare parts business of an appliance manufacturing company. This research study used real data to investigate the feasibility of using 3D printing to reduce complexity in the spare parts division in terms of supplier rationalization, inventory reduction, and total cost of ownership. The research method used two scenarios: one where manufacturing spare parts traditionally was the baseline model and the …

Connecting Offshore Floating Wind To The Western Electricity Grid: Transmission Options Decision Modeling, Bill Henry

Engineering and Technology Management Student Projects

The purpose of this project is to obtain stakeholder views on a range of aspects relating to a proactive planning process to build transmission facilities in coordination with development of floating offshore wind (OSW) in southern Oregon and northern California. In the event that a transmission planning process to examine the potential need to assess and build transmission facilities to connect these wind resource areas is launched at a future date, the results of this study will assist planners by obtaining initial stakeholder views on the breadth of choices that should be considered, and more importantly, provide key insights on …

A Sample Weight And Adaboost Cnn-Based Coarse To Fine Classification Of Fruit And Vegetables At A Supermarket Self-Checkout, Khurram Hameed, Douglas Chai, Alexander Rassau

Research outputs 2014 to 2021

© 2020 by the authors. Licensee MDPI, Basel, Switzerland. The physical features of fruit and vegetables make the task of vision-based classification of fruit and vegetables challenging. The classification of fruit and vegetables at a supermarket self-checkout poses even more challenges due to variable lighting conditions and human factors arising from customer interactions with the system along with the challenges associated with the colour, texture, shape, and size of a fruit or vegetable. Considering this complex application, we have proposed a progressive coarse to fine classification technique to classify fruit and vegetables at supermarket checkouts. The image and weight of …

Smart Factories, Dumb Policy? Managing Cybersecurity And Data Privacy Risks In The Industrial Internet Of Things, Scott J. Shackelford

Minnesota Journal of Law, Science & Technology

No abstract provided.

Automated Reverse Engineering Of Automotive Can Bus Controls, Charles Barron Kirby, Bryson Payne

KSU Proceedings on Cybersecurity Education, Research and Practice

This research provides a means of automating the process to reverse engineer an automobile’s CAN Bus to quickly recover CAN IDs and message values to control the various systems in a modern automobile. This approach involved the development of a Python script that uses several open-source tools to interact with the CAN Bus, and it takes advantage of several vulnerabilities associated with the CAN protocol. These vulnerabilities allow the script to conduct replay attacks against the CAN Bus and affect various systems in an automobile without the operator’s knowledge or interaction.

These replay attacks can be accomplished by capturing recorded …

Systems, Apparatus And Method For Material Preparations And / Or Handling, Robert Doebler, Ali Nadim, James D. Sterling, Anna Hickerson, Barbara Erwin, Denice Woyski, Ryan P. Talbot, Bruce Irvine

Business and Information Technology Faculty Research & Creative Works

Oscillating angularly rotating a container containing a mate rial may cause the material to be separate. Denser or heavier material may unexpectedly tend to be collected relatively close to the axis of rotation, while less dense or light material may tend to collect relatively away from the axis of rotation. Oscillation along an arcuate path provides high lysing efficiency. Alternatively, a micromotor may drive an impeller removably received in a container. Lysing may be implemented in batch mode, flow - through stop or semi-batch mode, or flow - through continuous mode. Lysing particulate material may exceed material to be lysed …

Residential Electricity Management And Protection System, Ejimonu Kosisochukwu Gabriel

Journal of International Technology and Information Management

The Residential Electricity Monitoring System is an electricity meter connected to the Internet to provide real time data on the power system in your home. The REMS is designed to replace the distribution board allowing it to conduct a series of tests on the quality of the electricity supply to your home/facility and, within your home detect basic wiring faults and allow owners and service providers to identify potential problems with the electrical systems.

The electrical monitoring system finally puts proper electrical control into the hands of the home owner by providing him with the ability to control power distribution …

Longitudinal Analysis Of Perceived And Objective Airline Performance Quality, Kaetlyn Blocker, Javad Gorjidooz

Student Works

Commercial air carrier performance is a multivariable function, uniquely and substantially impacted by passenger's perception of negative employee behavior. High industry visibility, coupled with exponential social media growth, has provided the incredible potential to either widen or narrow the perception-performance gap. The present research conducts a rare longitudinal evaluation of objective airline performance quality in contrast with consumer perceptions of perceived airline performance and the dynamic changes occurring therein. Additionally, the implications regarding air carriers facing both objective and perceived performance challenges, as well as implications for the industry as a whole, are discussed. Utilizing nearly 30 years of objective …

Intelligent Software Tools For Recruiting, Swatee B. Kulkarni, Xiangdong Che

Journal of International Technology and Information Management

In this paper, we outline how recruiting and talent acquisition gained importance within HRM field, then give a brief introduction to the newest tools used by the professionals for recruiting and lastly, describe the Artificial Intelligence-based tools that have started playing an increasingly important role. We also provide further research suggestions for using artificial intelligence-based tools to make recruiting more efficient and cost-effective.

Table Of Contents Jitim Vol 28 Issue 2, 2019

Journal of International Technology and Information Management

Table of Contents JITIM 2, 2019

A Longitudinal Analysis Of The Impact Of The Indicators In The Networked Readiness Index (Nri), Satya Pratipatti, Ahmed Gomaa

Journal of International Technology and Information Management

World Economic Forum publishes the Networked Readiness Index (NRI) annually, to reflect the Information and Communication Technology (ICT) status of different countries. The NRI is developed by aggregating 53 indicators. The study identifies the most critical indicators to focus on, to improve the NRI status of countries at different stages of economic development. It uses data from 117 countries and analyzes the changes in the indicators along with their impacts between the years 2012 and 2016. The study explores the differences between countries by grouping them into four groups based on their NRI status. The analysis identifies six indicators with …

Car Hacking: Accessing And Exploiting The Can Bus Protocol, Bryson R. Payne

Journal of Cybersecurity Education, Research and Practice

With the rapid adoption of internet-connected and driver-assist technologies, and the spread of semi-autonomous to self-driving cars on roads worldwide, cybersecurity for smart cars is a timely concern and one worth exploring both in the classroom and in the real world. Highly publicized hacks against production cars, and a relatively small number of crashes involving autonomous vehicles, have brought the issue of securing smart cars to the forefront as a matter of public and individual safety, and the cybersecurity of these “data centers on wheels” is of greater concern than ever.

However, up to this point there has been a …

Investigating Consumer Satisfaction Towards Mobile Marketing, Dr Surabhi Singh

Journal of International Technology and Information Management

The extensive applications of mobile phones are visible in global companies for the marketing of their products. The popularity of mobile marketing is increasing considerably. This paper has provided insights into the perspectives of consumer attitude towards mobile marketing in India. The companies will develop an understanding of how mobile marketing influence consumer attitudes. The scale of measurement used for Attitudes was Likert scale and explained the consumer's behavior towards mobile marketing. The factors identified through the study will provide insights into Consumer buying behavior via mobile platforms. The analytical tool SPSS has been used for analysis by using methods …

Coordinating Supply And Demand On An On-Demand Service Platform With Impatient Customers, Jiaru Bai, Kut C. So, Christopher S. Tang, Xiqun Chen, Hai Wang

Research Collection School Of Computing and Information Systems

We consider an on-demand service platform using earning sensitive independent providers with heterogeneous reservation price (for work participation) to serve its time and price sensitive customers with heterogeneous valuation of the service. As such, both the supply and demand are "endogenously'' dependent on the price the platform charges its customers and the wage the platform pays its independent providers. We present an analytical model with endogenous supply (number of participating agents) and endogenous demand (customer request rate) to study this on-demand service platform. To coordinate endogenous demand with endogenous supply, we include the steady-state waiting time performance based on a …

A Ulysses Pact With Artificial Systems. How To Deliberately Change The Objective Spirit With Cultured Ai, Bruno Gransche

Computer Ethics - Philosophical Enquiry (CEPE) Proceedings

The article introduces a concept of cultured technology, i.e. intelligent systems capable of interacting with humans and showing (or simulating) manners, of following customs and of socio-sensitive considerations. Such technologies might, when deployed on a large scale, influence and change the realm of human customs, traditions, standards of acceptable behavior, etc. This realm is known as the "objective spirit" (Hegel), which usually is thought of as being historically changing but not subject to deliberate human design. The article investigates the question of whether the purposeful design of interactive technologies (as cultured technologies) could enable us to shape modes of …

Capability Of Matterport 3d Camera For Industrial Archaeology Sites Inventory, R. Shults, E. Levin, R. Habibi, S. Shenoy, O. Honcheruk, T. Hart, Z. An

Michigan Tech Publications, Part 1

This paper provides an overview of state-of-The-Art technology and sensor for the inventory of industrial archaeology. As an object of study, a historical copper shaft the Quincy Mine in Michigan State Upper Peninsula was chosen. This shaft was operated for nearly 100 years from 1846 to 1945 and today, what remains of the shaft is a part of the Keweenaw National Historical Park. The main sensor for data acquisition that was used is a 3D camera Matterport. In given research, the results of the above ground scanning using of Matterport are presented. Before scanning a calibration of Matterport camera was …

Crude Oil Price Prediction With Decision Tree Based Regression Approach, Engu Chen, Xin James He

Journal of International Technology and Information Management

Crude oil is an essential commodity for industry and the prediction of its price is crucial for many business entities and government organizations. While there have been quite a few conventional statistical models to forecast oil prices, we find that there is not much research using decision tree models to predict crude oil prices. In this research, we develop decision tree models to forecast crude oil prices. In addition to historical crude oil price time series data, we also use some predictor variables that would potentially affect crude oil prices, including crude oil demand and supply, and monthly GDP and …

Ipv6 Diffusion Milestones: Assessing The Quantity And Quality Of Adoption, John Pickard, Mark Angolia, Dale Drummond

Journal of International Technology and Information Management

There are currently two versions of Internet Protocol (IP) in use today, IP version 4 (IPv4) and IP version 6 (IPv6). The original version, IPv4, was standardized in the early 1980s as part of the Defense Advanced Research Project Agency Internet program and became the official Internet protocol in 1983 (Kleinrock, 2010). IPv6 was standardized in 1995 as its successor to provide enhanced capabilities and address IPv4 technological limitations, most notable of which was the anticipated exhaustion of address space (Deering & Hinden, 1995). While the two protocols have some functional similarities, they are distinct and not backward compatible; IPv4-only …

The Role Of Emotional Expression In Accessing Social Networks: The Case Of Newcomers' Blogs, Michael J. Hine, Luciara Nardon, Daniel Gulanowski

Journal of International Technology and Information Management

Research has established the critical role of social networks in facilitating adjustment to foreign environments. Increasingly, social interactions are happening through computer mediated technology. This paper explores the role of emotional expression in newcomers’ blogs in developing and interacting with social networks in a new country. This research uses a dictionary-based text analytics approach to detect emotional expression in newcomers’ blog posts and their associated discussions. Blog posts with more emotional expression had more associated responses; discussions tended to be more positive than posts; and the relative amount of negative emotion in the discussions increases as posts become more negative. …

The Use Of Generic Scripting In Certain Application Development Projects, Vance Allen Etnyre, Jian Denny Lin, Nanfei Sun

Journal of International Technology and Information Management

This article discusses generic scripting, a useful scripting technology for developing applications. In its simplest use, generic scripting can be used as a documentation tool to replace flowcharting or pseudocode. in certain situations, generic scripting can lead directly to a working application without the need to write, compile and test a new program. Generic scripting is discussed as a tool which can be used in logical design, detailed design and implementation of a new application. An example is presented to show how generic scripting can be used by non-programmers to simplify the development of applications. This example is used to …

College Choice Criteria Utilizing Conjoint Analysis Enabled On A Saas Platform, Alison Munsch

Journal of International Technology and Information Management

College enrollments and low to moderate household incomes are stagnating while tuition costs are increasing. The New York State Legislature enacted the nation’s first tuition-free degree program, the Excelsior Scholarship, designed to make a college education more affordable to middle class families. This legislation can impact what institution of higher education students will choose upon high school graduation. In order to understand the choice criteria for selecting an institution of higher education, a research study was conducted among a representative sample of high school upper classmen and parents of this respondent segment. The data collection and analysis were accomplished using …

An Arm And A Leg: Medtech Perspectives On Human-Centered Design, Evan D. Poff

Marriott Student Review

The art of human-centered design accounts for both technological and emotional specifications in order to deliver meaningful products that meet the specific needs of the individual customer. Every business professional can deepen his or her understanding of human-centered design – regardless of our industry of choice – by looking to perspectives that the business of medical technology offers. To that end, this article draws upon interviews with three figures in this remarkable field, distilling their insights on how to cultivate businesses that produce human-centered solutions.

Exoskeleton, Vinu Casper, Liliana Fitzpatrick

Engineering and Technology Management Student Projects

This is a research about the marketing plan for exoskeleton wearable devices. The objective is to provide a meaningful Customer Value Proposition to the prospective customers.The Samsung company SWOT analysis is the basis for a marketing strategy. The exoskeleton features and market definition is included in the analysis. A competitor analysis of homogeneus exoskeletons providers is included to review the current market. An exhaustive customer analysis was performed to identify the customer needs as the input for the marketing plan development. The potential market was identified to learn about the exoskeleton market share opportunity. The exoskeleton global market is analyzed …

Improving The Distribution And Use Of Biogas By Conversion To Methanol, Zachary Christman

Department of Agronomy and Horticulture: Dissertations, Theses, and Student Research

In this technology review, the process of turning an average biogas into methanol will be presented. The purpose is to find a better method of transporting the energy contained within biogas so that it may be used in industry as a value added product. The first step is removal of hydrogen sulfide, a corrosive chemical that can breakdown mechanical parts. The second step is carbon capture and conversion of the biogas into hydrogen. The final step is the hydrogenation of carbon dioxide into methanol using a copper catalyst and an alcohol co-catalyst.

Ict Competencies In Eight Mayan-Speaking Communities Of Mexico: Preliminary Findings, J. Gabriel D. Domínguez Castillo, Alexander N. Chen, Mark E. Mcmurtrey Ph.D., Edith J. Cisneros Cohernour, Marianne Gabriel

Journal of International Technology and Information Management

The skills related to the use of information and communication technologies (ICT) were examined in this study within the context of eight communities with a high degree of vulnerability and diversity. The objectives of the study were: a) to conduct a diagnosis of thirteen competencies related to the use of ICT in eight Mayan-speaking communities in the state of Yucatan, Mexico, and b) to examine such variables as gender, marital status, and the education level of their parents. in relation to the degree of ICT among these youth.

The findings indicate that there are differences in the use of technology …

Design Thinking As A Framework For Teaching Packaging Innovation, Javier De La Fuente, Irene Carbonell, Mary Laporte

Journal of Applied Packaging Research

Students in scientific/technical-oriented disciplines struggle with achieving good levels of innovation when exposed to design problems. Research indicates the need for implementing alternative pedagogical approaches in technical curricula that enhance students’ creative skills. The purpose of this study was to evaluate the implementation of a cross-disciplinary pedagogical approach with a focus on teaching innovation in the field of packaging engineering at a university in the United States. A Design Thinking Project-Based Learning (DTPBL) approach was used to improve the levels of innovation in student work. Its outcomes were compared with those of a Traditional Project-Based Learning (TPBL) approach. The implementation …

Improving Vix Futures Forecasts Using Machine Learning Methods, James Hosker, Slobodan Djurdjevic, Hieu Nguyen, Robert Slater

SMU Data Science Review

The problem of forecasting market volatility is a difficult task for most fund managers. Volatility forecasts are used for risk management, alpha (risk) trading, and the reduction of trading friction. Improving the forecasts of future market volatility assists fund managers in adding or reducing risk in their portfolios as well as in increasing hedges to protect their portfolios in anticipation of a market sell-off event. Our analysis compares three existing financial models that forecast future market volatility using the Chicago Board Options Exchange Volatility Index (VIX) to six machine/deep learning supervised regression methods. This analysis determines which models provide best …

Hp Brazil: Journey Towards Industrial Internet Of Things Within Industry 4.0 Context, Rebecca Angeles

Journal of International Technology and Information Management

This paper features a case study of Hewlett Packard Brazil’s deployment of radio frequency identification-enabled Exceler8 platform to support its product assembly using Flextronics in Sorocaba, Sao Paulo and distribution by DHL. The study also identifies the stage HP Brazil belongs to in its journey to being a full smart factory using the framework of Odwazny et al. (2018). The case study and content analysis methods are used in analyzing the concepts prescribed by the Industry 4.0, smart factory, and Industrial Internet of Things (IIOT) frameworks to HP Brazil’s RFID system. The Odwazny et al. (2018) framework identifies HP Brazil …