Environmental Design Commons^™

Framework To Develop Time- And Voltage-Dependent Building Load Profiles Using Polynomial Load Models, Andrew Parker, Mhd Anas Alkrch, Kevin James, Ahmad Almaghrebi, Mahmoud Alahmad

Durham School of Architectural Engineering and Construction: Faculty Publications

The power consumption of buildings over the course of each minute, hour, day and season plays a major role in how this load influences the Electric Power System voltage and frequency, and vice versa. This consumption is based on the building's load component types, efficiencies, and how they consume power and react to changes in real time. Due to this complexity, standard full-building load models are typically voltage-invariant. This paper proposes a novel framework to transform these voltage-invariant building load models into fully time- and voltage-dependent load profiles using available data on the voltage sensitivity of individual load components. While …

A Case Study To Quantify Variability In Building Load Profiles, Andrew Parker, Sam Moayedi, Kevin James, Dongming Peng, Mahmoud Alahmad

Durham School of Architectural Engineering and Construction: Faculty Publications

Recent technology development and penetration of advanced metering infrastructure (AMI), advanced building control systems, and the internet-of-things (IoT) in the built environment are providing detailed information on building operation, performance, and user's comfort and behavior. Building owners can obtain a wide range of energy consumption details at various levels of time granularity to augment their decisions as they manage the building operation and interact with the grid. AMI data are providing a new level of detail and visibility that may enhance building services and assets in the smart grid domain and make buildings inch closer to becoming a grid-interactive energy …

Evaluating Prediction Models Of Creep And Drying Shrinkage Of Self-Consolidating Concrete Containing Supplementary Cementitious Materials/Fillers, Micheal Asaad, George Morcous

Durham School of Architectural Engineering and Construction: Faculty Publications

Supplementary cementitious materials (SCMs) and fillers play an important role in enhancing the mechanical properties and durability of concrete. SCMs and fillers are commonly used in self-consolidating concrete (SCC) mixtures to also enhance their rheological properties. However, these additives could have significant effects on the viscoelastic properties of concrete. Existing models for predicting creep and drying shrinkage of concrete do not consider the effect of SCM/filler on the predicted values. This study evaluates existing creep and drying shrinkage models, including AASHTO LRFD, ACI209, CEB-FIP MC90-99, B3, and GL2000, for SCC mixtures with different SCMs/fillers. Forty SCC mixtures were proportioned for …

Complete Streets, Jim Speer

2021 Spring Reports (Sullivan)

The City of Sullivan enacted a Quality of Life plan to address multiple improvements to their city, including some of the city’s infrastructure. Mayor Clint Lamb’s goal is to connect the city via roadways and trail systems that are accessible for all transportation methods and attractive for community members and tourists. ENVI460 students provided recommendations based off the city’s need for improvements to road systems and attractiveness. Students recommended a new roadway design for the Main Street section, sustainable infrastructure additions and buffer zones, and green space for attraction sites.

The Facility Infection Risk Estimator™: A Web Application Tool For Comparing Indoor Risk Mitigation Strategies By Estimating Airborne Transmission Risk, Marcel Harmon, Josephine Lau

Durham School of Architectural Engineering and Construction: Faculty Publications

The COVID-19 pandemic created needs for (a) estimating the existing airborne risk of infection from SARS-CoV-2 in existing facilities and new designs and (b) estimating and comparing the impacts of engineering and behavioural strategies for contextually reducing that risk. This paper presents the development of a web application to meet these needs, the Facility Infection Risk Estimator™, and its underlying Wells–Riley based model. The model specifically estimates (a) the removal efficiencies of various settling, ventilation, filtration and virus inactivation strategies and (b) the associated probability of infection, given the room physical parameters and number of individuals infected present with either …

Designing Gfrp-Reinforced Tilt-Up Wall Panels, Fray F. Pozo-Lora, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

Tilt-up construction was effectively enabled on a wide scale in 1979, when the ACI committee 551 report on Tilt-up construction was published, the Recommended Tilt-Up Wall Design, aka, the Yellow Book and the subsequent ACI-SEASC Task, aka the Green Book, and another Tilt-up design and construction manual developed by the ACI in 1988. The Tilt-up Concrete Association was created in 1986 by a group of industry professionals who had the need of an organization dedicated to the industry. ACI 551 maintains a document outlining the standard practice for contemporary Tilt-up design and construction. The ACI 551 document does not consider …

Reasons And Remedies To The Dying Plant Walls, Hayley Q. Mcgough

Construction Management

Sustainability in construction has been increasingly popular and detrimental with the state of the planet and climate change. One of the more popular solutions is the addition of plant façades to a building, which are plants that are put on the vertical of a building. The benefits that come with plant facades include and are not limited to: Reduction of the urban heat island effect, improved air quality, local job creation, improved energy efficiency, building structure protection, noise reduction, increased biodiversity, urban agriculture. These benefits are not reaching their full potential because these plant façades keep dying creating a bigger …

Performance Evaluation Of A Prestressed Belitic Calcium Sulfoaluminate Cement (Bcsa) Concrete Bridge Girder, Nick Markosian, Raed Tawadrous, Mohammad Mastali, Robert J. Thomas, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

Belitic calcium sulfoaluminate (BCSA) cement is a sustainable alternative to Portland cement that offers rapid setting characteristics that could accelerate throughput in precast concrete operations. BCSA cements have lower carbon footprint, embodied energy, and natural resource consumption than Portland cement. However, these benefits are not often utilized in structural members due to lack of specifications and perceived logistical challenges. This paper evaluates the performance of a full-scale precast, prestressed voided deck slab bridge girder made with BCSA cement concrete. The rapid-set properties of BCSA cement allowed the initial concrete compressive strength to reach the required 4300 psi release strength at …

Discrete Rigid Block Analysis To Assess Settlement Induced Damage In Unreinforced Masonry Façades, Ryan Ehresman, Nathan Taylor, Bora Pulatsu, Ece Erdogmus

Durham School of Architectural Engineering and Construction: Faculty Publications

In this study, a system of discontinuous rigid blocks is employed to simulate the possible damage mechanisms in unreinforced masonry (URM) façades and load-bearing frame systems subjected to settlement using the discrete element method (DEM). First, the employed modeling strategy is validated utilizing the available experimental results presented in the literature. Once there is a good agreement between the computational models and experimental findings, a sensitivity analysis is performed to quantify the influence of the input parameters defined in the DEM-based numerical model. Finally, the proposed modeling strategy is further utilized to assess the damage pattern that may develop in …

A Comparison Between Ultrasonic Guidedwave Leakage And Half-Cell Potential Methods In Detection Of Corrosion In Reinforced Concrete Decks, Ahmad Shoaib Amiri, Ece Erdogmus, Dana Richter-Egger

Durham School of Architectural Engineering and Construction: Faculty Publications

This article presents the advantages and limitations of a recently developed Ultrasonic Guided Wave Leakage (UGWL) method in comparison to the well-known Half-Cell Potential (HCP) method in their ability to detect corrosion in reinforced concrete (RC) bridge decks. This research also establishes a correlation between UGWL data and chloride content in concrete RC slabs. Concrete slabs submerged in a 10% NaCl solution were monitored using both methods over a period of six months. The chloride content from the three cores (0.84, 0.55, and 0.18%) extracted from the slab after the 6-month long process all exceeded the chloride threshold values suggested …

Assessment Of Carbon Dioxide Emission And Its Impact On High-Rise Mixed-Use Buildings In Egypt, Ahmed Salah Hamza

Theses and Dissertations

With Egypt's vision of 2030 focusing on sustainable development with a true emphasis on Carbon Dioxide (CO₂) emission reduction in the newly built cities and high-rise buildings, efforts are exerted on various levels towards accomplishing the vision’s goals. This is achieved through multiple tools and models associated with aiding the reduction of carbon emissions, yet not a clear one was introduced for the mixed-use buildings in Egypt.

Through this work, a significant gap was identified with respect to high-rise buildings carbon emission assessment in Egypt. This was a main driving force for this work in an attempt to …

Unveiling Women’S Needs And Expectations As Users Of Bike Sharing Services: The H2020 Diamond Project, Andrea Gorrini, Rawad Choubassi, Federico Messa, Wafaa Saleh, Augustus Ababio-Donkor, Maria Chiara Leva, Lorraine D'Arcy, Francesco Fabbri, David Laniado, Pablo Aragon

Articles

Within the objectives of the H2020 DIAMOND project, the paper investigates women’s needs and expectations as users of the bike-sharing service managed by Syndicat Mixte Autolib et Velib Métropole in the territory of Paris Region-Petite Couronne (France). The paper presents a thematic literature review focused on gender inclusion in bike-sharing schemes. The proposed methodological approach is based on (i) Geographic Information Systems for the analysis of geolocated open datasets related to land, sociodemographic and mobility characteristics of the areas surrounding each docking stations. This was aimed at identifying a short list of suitable bike-sharing docking stations, which were further characterized …

Wood City: Timberizing The City’S Building Blocks, Community Design Center

Community Design Center Project Reports

Exogenous forces are reshaping building markets among the 19 real estate product sectors comprising most of America’s built environment. The real estate development value chain is being recast in sectors like fuel retail, fast food, grocery, and warehousing, while new venture-capital interventions are hybridizing housing, hospitality, healthcare, and the senior services markets in value-adding ways. Meanwhile, pockets of low-density metropolitan fabrics—the non-downtown environments encompassing suburbs, small towns, villages, edge cities, exurban areas, and rural areas, which house 85 percent of America’s population —are densifying in response to consumer demand for walkable, mixed-use environments. Disruptions are driving innovation in each of …

On The Computational Efficiency Of Les And Hybrid Rans-Les Models In Building Aerodynamics, Aly Mousaad Aly, Faiaz Khaled

Faculty Publications

Large-eddy simulation (LES) has proven to offer superior accuracy in regards to predicting surface pressures compared to the Reynolds-averaged Navier Stokes (RANS) models. However, the primary impediment is the high computational cost associated with LES. The authors attempt to investigate the computational cost and accuracy by employing different sub-grid scale (SGS) models in LES and hybrid RANS-LES models. One of the prerequisites of accurate pressure estimations is to ensure a horizontally homogeneous empty computational domain. This study aims to compare the computational competence qualitatively and quantitatively using an empty domain in regards to the ability to maintain horizontal homogeneity. The …

On The Computational Efficiency Of Les And Hybrid Rans-Les Models In Building Aerodynamics, Faiaz Khaled, Aly Mousaad Aly

Faculty Publications

No abstract provided.

A Spatial Analysis Of Supply-Demand Of Public Transportation In Jefferson County, Kentucky., Nastaran Abdoli

Electronic Theses and Dissertations

Public transportation is important as it serves individuals, especially the transit-dependent population, by providing a basic mobility service to these people and all others who rely on public transportation. This research utilized estimating public transportation demand and supply to analyze the spatial patterns of public transportation in Jefferson County, Kentucky. The study focuses on the transit-dependent population, and it considers indicators of age, poverty status, vehicle ownership, and foreign-born population with less than five years residency in the United States. This study conducted a public transit supply-demand analysis to identify areas with imbalanced supply and demand in Jefferson County at …

Cm Member Of Slocoe Peace Conference Center Feasibility Study, Jackson Reynolds

Construction Management

This paper describes the parking design and estimate portion of a whole feasibility study conducted by an interdisciplinary team. The interdisciplinary team consisted of three senior undergraduate industrial engineering students, and one senior undergraduate construction management student. This feasibility study was conducted for the San Luis Obispo County Office of Education (SLOCOE) to determine if it is feasible to construct a new, 400-person conference center on a site in San Luis Obispo, CA. The complete study includes analyses of the following topics: economic, utilities, traffic/road, approval from Chumash Tribe, social/historical, climate, geological, vegetation and wildlife, noise and pollution, parking, mandatory …

Going Green: A Comparative Analysis Of Green Urbanism In Paris And Shanghai, Jeanne Torp

Honors Theses

As climate change becomes more pressing with each day and as we scramble to slow down the challenges it poses, adapting the means of operation within our cities will become an invaluable tool for reducing humanity’s carbon footprint. This paper seeks to study the ways in which green infrastructure in global cities can be used to do just that—adapting to and mitigating the effects of challenges resulting from climate change. In order to provide a broad overview of the effectiveness of such green infrastructure systems across the globe, this research will focus on two cities that vary greatly in their …

A Dynamic Programming Approach To Determine Optimum Modularity Level In Industrial Packaging, Marshal Louie, Kumar B

Journal of Applied Packaging Research

Modular packaging facilitate customization for accommodating variable product sizes in a product family. When determining package sizes for product variability, packaging engineers does not find difficulty to determine package dimension for less product variety whereas if the product variety is more, then determining the dimension of modular package involves complex decision-making and time-consuming process to find the optimal solution. This in turn directly impacts the overall lead time of the supply chain. Thus, in this paper a dynamic programming is developed to determine the quantity and dimension of modular packages for every demand of assorted products sizes. The program helps …

Exploiting Pull-In/Pull-Out Hysteresis In Electrostatic Mems Sensor Networks To Realize A Novel Sensing Continuous-Time Recurrent Neural Network, Mohammad H. Hasan, Amin Abbasalipour, Hamed Nikfarjam, Siavash Pourkamali, Muhammad Emad-Un-Din, Roozbeh Jafari, Fadi Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

The goal of this paper is to provide a novel computing approach that can be used to reduce the power consumption, size, and cost of wearable electronics. To achieve this goal, the use of microelectromechanical systems (MEMS) sensors for simultaneous sensing and computing is introduced. Specifically, by enabling sensing and computing locally at the MEMS sensor node and utilizing the usually unwanted pull in/out hysteresis, we may eliminate the need for cloud computing and reduce the use of analog-to-digital converters, sampling circuits, and digital processors. As a proof of concept, we show that a simulation model of a network of …

How Green Buildings Effect Both Price And Desire In The Real Estate Housing Market, Bryson Lino

Construction Management

There has been a recent emphasis on green building certification. Unlike other conventional building approaches, green building has emerged as a sustainable way of building in the real estate housing market. As a result of the green building revolution, the real estate developers have been prompted to acknowledge the essence of environmental and social factors on the investment properties’ value. It is through such a paradigm shift that the green building has redefined the real estate business. Given that climate change has emerged as a major global issue, interventions have been made to avert the emission of high levels of …

Comparing The Environmental Impacts Of Using Mass Timber And Structural Steel, Khang Hoang Nguyen, Steelee Knight Morgan

Construction Management

Although mass timber has seen a gradual rise in demand in the past, there has been a lack of extensive research on the environmental impacts of using mass timber as a primary structural framing material. This paper compares structural steel, and mass timber’s total embodied carbon emissions. Accurate estimates were made using plans and specs for different projects retrieved from semi-structured interviews. The estimates were input through the EC3 Calculator to provide extensive total carbon emissions measurements between each construction material. Using structural steel framing increased the project’s overall environmental impact by roughly 84% compared to using mass timber. The …

Uncertainty Matters: Bayesian Probabilistic Forecasting For Residential Smart Meter Prediction, Segmentation, And Behavioral Measurement And Verification, Jonathan Roth, Jayashree Chadalawada, K. Rishee Jain, Clayton Miller

Research Collection College of Integrative Studies

As new grid edge technologies emerge—such as rooftop solar panels, battery storage, and controllable water heaters—quantifying the uncertainties of building load forecasts is becoming more critical. The recent adoption of smart meter infrastructures provided new granular data streams, largely unavailable just ten years ago, that can be utilized to better forecast building-level demand. This paper uses Bayesian Structural Time Series for probabilistic load forecasting at the residential building level to capture uncertainties in forecasting. We use sub-hourly electrical submeter data from 120 residential apartments in Singapore that were part of a behavioral intervention study. The proposed model addresses several fundamental …

Quasi-Static Nonlinear Seismic Assessment Of A Fourth Century A.D. Roman Aqueduct In Istanbul, Turkey, Semih Gonen, Ece Erdogmus, Engin Karaesmen, Erhan Karaesmen

Durham School of Architectural Engineering and Construction: Faculty Publications

The majority of architectural heritage consists of load-bearing masonry components made up of stone units and relatively weak mortar joints, yielding potential weak planes for masonry structures where tension and shear failures are expected to occur. Advanced nonlinear analyses are required to simulate these phenomena and predict the corresponding nonlinear structural behavior of historic masonry constructions. In this context, this paper presents a model of a stone masonry Roman aqueduct (the Valens Aqueduct), constructed in the fourth century A.D. in Istanbul, Turkey, to explore the seismic capacity and behavior using the discrete element method (DEM). The employed modeling approach comprises …

Generation Of 3d Model Of Downtown Sullivan, Jim Speer

2020 Fall Reports (Sullivan)

The City of Sullivan identified the downtown area as an area for improvement and needed a way to depict areas. In ENVI 610, one graduate student was able to address the agreed upon goals of developing a 3D model of the downtown square. Some recommendations for future use of the 3D model were made for land-use planning, drainage systems, elevation, and more.

Festigkeitsbeschreibung Des Schwerbetons Auf Alkalischlacken – Bindemittel, A Tulaganov, S Hodjaev, A Sultanov, B Tulaganov, B Otakulov, N Hodjaev, D Abdasov

The Scientific-Practice Journal of Architecture, Construction and Design

The article describes the laws of describing the strength of heavy concrete based on non-calcined alkaline binders. It is shown that strength is written as a function of the generalized argument.

Why Unsafety Has A Negative Relationship With Economic Effectiveness In The World?, Aziz Zikriyoev

The Scientific-Practice Journal of Architecture, Construction and Design

Due to regularly registered diseases and major accidents of workers in the construction industry can be explained expandable building projects and state programs for supporting population. The main purpose of the current paperwork is to explain wining unsafety at workplaces both theoretical and practical points of view generated with economic and social levels.

Feasibility Of Lora For Smart Home Indoor Localization, Kyungki Kim, Sining Li, Milad Heydariaan, Nour Smaoui, Omprakash Gnawali, Wonho Suh, Min Jae Suh, Jung In Kim

Durham School of Architectural Engineering and Construction: Faculty Publications

With the advancement of low-power and low-cost wireless technologies in the past few years, the Internet of Things (IoT) has been growing rapidly in numerous areas of Industry 4.0 and smart homes. With the development of many applications for the IoT, indoor localization, i.e., the capability to determine the physical location of people or devices, has become an important component of smart homes. Various wireless technologies have been used for indoor localization includingWiFi, ultra-wideband (UWB), Bluetooth low energy (BLE), radio-frequency identification (RFID), and LoRa. The ability of low-cost long range (LoRa) radios for low-power and long-range communication has made this …

Evaluating The Thermoresponsive Properties Of Hydroxypropyl Cellulose Solutions For Smart Window Applications, Adam Reed

Williams Honors College, Honors Research Projects

With HVAC and building energy usage expected to increase, there is a strong need for autonomous thermal management solutions. In particular, there has been a growing interest in thermoresponsive (TR) smart windows that are activated by ambient temperature changes. Most TR smart windows contain a liquid solution between two panes. The goal of this research project was to develop a self-supporting smart window by forming a gel that maintained its TR properties. A gel is less prone to spilling in the case of window breakage. It was also desired to tune the phase transition to occur at environmentally relevant conditions …

Forecasting The Construction Expenditure Cash Flow For Transportation Design-Build Projects With A Case-Based Reasoning Model, Yunping Liang, Baabak Ashuri, Mingshu Li

Durham School of Architectural Engineering and Construction: Faculty Publications

Accurately forecasting the construction expenditure cash flow of transportation projects is critical for state departments of transportation (state DOTs) to secure sufficient funding to cover their fiscal obligations throughout the project development timeline. However, there is no quantitative model to assist state DOTs in accurately forecasting expenditure cash flows for design-build projects. At the outset of awarding a typical design-build contract, the design has not been finalized to enable exact quantities for a detailed cost estimate. This issue represents a big difference between design-build and design-bid-build projects that makes estimating the project payouts more difficult for design-build projects. This research …