Environmental Design Commons^™

On The Computational Efficiency Of Les And Hybrid Rans-Les Models In Building Aerodynamics, Faiaz Khaled, Aly Mousaad Aly

Faculty Publications

No abstract provided.

Cm Member Of Slocoe Peace Conference Center Feasibility Study, Jackson Reynolds

Construction Management

This paper describes the parking design and estimate portion of a whole feasibility study conducted by an interdisciplinary team. The interdisciplinary team consisted of three senior undergraduate industrial engineering students, and one senior undergraduate construction management student. This feasibility study was conducted for the San Luis Obispo County Office of Education (SLOCOE) to determine if it is feasible to construct a new, 400-person conference center on a site in San Luis Obispo, CA. The complete study includes analyses of the following topics: economic, utilities, traffic/road, approval from Chumash Tribe, social/historical, climate, geological, vegetation and wildlife, noise and pollution, parking, mandatory …

Exploiting Pull-In/Pull-Out Hysteresis In Electrostatic Mems Sensor Networks To Realize A Novel Sensing Continuous-Time Recurrent Neural Network, Mohammad H. Hasan, Amin Abbasalipour, Hamed Nikfarjam, Siavash Pourkamali, Muhammad Emad-Un-Din, Roozbeh Jafari, Fadi Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

The goal of this paper is to provide a novel computing approach that can be used to reduce the power consumption, size, and cost of wearable electronics. To achieve this goal, the use of microelectromechanical systems (MEMS) sensors for simultaneous sensing and computing is introduced. Specifically, by enabling sensing and computing locally at the MEMS sensor node and utilizing the usually unwanted pull in/out hysteresis, we may eliminate the need for cloud computing and reduce the use of analog-to-digital converters, sampling circuits, and digital processors. As a proof of concept, we show that a simulation model of a network of …

Comparing The Environmental Impacts Of Using Mass Timber And Structural Steel, Khang Hoang Nguyen, Steelee Knight Morgan

Construction Management

Although mass timber has seen a gradual rise in demand in the past, there has been a lack of extensive research on the environmental impacts of using mass timber as a primary structural framing material. This paper compares structural steel, and mass timber’s total embodied carbon emissions. Accurate estimates were made using plans and specs for different projects retrieved from semi-structured interviews. The estimates were input through the EC3 Calculator to provide extensive total carbon emissions measurements between each construction material. Using structural steel framing increased the project’s overall environmental impact by roughly 84% compared to using mass timber. The …

Quasi-Static Nonlinear Seismic Assessment Of A Fourth Century A.D. Roman Aqueduct In Istanbul, Turkey, Semih Gonen, Ece Erdogmus, Engin Karaesmen, Erhan Karaesmen

Durham School of Architectural Engineering and Construction: Faculty Publications

The majority of architectural heritage consists of load-bearing masonry components made up of stone units and relatively weak mortar joints, yielding potential weak planes for masonry structures where tension and shear failures are expected to occur. Advanced nonlinear analyses are required to simulate these phenomena and predict the corresponding nonlinear structural behavior of historic masonry constructions. In this context, this paper presents a model of a stone masonry Roman aqueduct (the Valens Aqueduct), constructed in the fourth century A.D. in Istanbul, Turkey, to explore the seismic capacity and behavior using the discrete element method (DEM). The employed modeling approach comprises …

Feasibility Of Lora For Smart Home Indoor Localization, Kyungki Kim, Sining Li, Milad Heydariaan, Nour Smaoui, Omprakash Gnawali, Wonho Suh, Min Jae Suh, Jung In Kim

Durham School of Architectural Engineering and Construction: Faculty Publications

With the advancement of low-power and low-cost wireless technologies in the past few years, the Internet of Things (IoT) has been growing rapidly in numerous areas of Industry 4.0 and smart homes. With the development of many applications for the IoT, indoor localization, i.e., the capability to determine the physical location of people or devices, has become an important component of smart homes. Various wireless technologies have been used for indoor localization includingWiFi, ultra-wideband (UWB), Bluetooth low energy (BLE), radio-frequency identification (RFID), and LoRa. The ability of low-cost long range (LoRa) radios for low-power and long-range communication has made this …

Forecasting The Construction Expenditure Cash Flow For Transportation Design-Build Projects With A Case-Based Reasoning Model, Yunping Liang, Baabak Ashuri, Mingshu Li

Durham School of Architectural Engineering and Construction: Faculty Publications

Accurately forecasting the construction expenditure cash flow of transportation projects is critical for state departments of transportation (state DOTs) to secure sufficient funding to cover their fiscal obligations throughout the project development timeline. However, there is no quantitative model to assist state DOTs in accurately forecasting expenditure cash flows for design-build projects. At the outset of awarding a typical design-build contract, the design has not been finalized to enable exact quantities for a detailed cost estimate. This issue represents a big difference between design-build and design-bid-build projects that makes estimating the project payouts more difficult for design-build projects. This research …

Enhancing Bim Implementation In The Ethiopian Public Construction Sector: An Empirical Study, Solomon Belay, James D. Goedert, Asregedew Woldesenbet, Saeed Rokooei3

Durham School of Architectural Engineering and Construction: Faculty Publications

Recently, the popularity of BIM has grown rapidly in the public construction sector. However, only a few studies so far have been seeking to address the BIM adoption benefits and barriers in developmental public projects across the low-income countries. Thus, the study aims to investigate the benefits and barriers of BIM adoption in the context of the Ethiopian infrastructure market. To achieve the objectives, a comprehensive systematic literature review was conducted to identify BIM adoption benefits and barriers in developing countries. Then, a structured questionnaire survey was conducted to collect data from various professionals working in organizations including client, consultant, …

Condition Rating Prediction Using An Interactive Deterioration Model Development Package, Minwoo Chang, Mitchell S. Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper presents an advanced method to determine explanatory variables required for developing deterioration models without the interference of human bias. Although a stationary set of explanatory variables is ideal for long-term monitoring and asset management, the penalty regression results vary annually due to the innate bias in the inspection data. In this study, weighting factors were introduced to consider the inspection data collected for several years, and the most stationary set was identified. To manage the substantial amount of inspection data effectively, we proposed a software package referred to as the Deterioration Model Development Package (DMDP). The objective of …

Brazil, Big Hydro, And A Beautiful Monster: “Green” Energy Generation In The Xingu River Basin, Ian F. Hirons

Student Works

Brazil is quickly becoming an influential actor on the world stage of geopolitics. The nation has achieved global economic and environmental recognition due to the extensive development of its hydrological resources in the form of hydroelectric power plants. As the world’s second greatest generator of hydroelectricity, Brazil has proven a staunch adherence to building dams in the large-scale. Though these dams have brought electricity to millions of people across the country, the socio-ecological toll inflicted by their construction has been devastating to natural biomes and local inhabitants. This article traces Brazil’s proclivity for large-scale hydropower to four motivational categories often …

Shahar Sharoitida Avtomobilllarni Parkovkalashda Innovatsion Loyihalash Tizimi, Zohidjon Baxtiyor O`G`Li Abdurahmonov, Jamshid Abdunazarov

Scientific-technical journal

Annotatsiya: Shahar ko`chalarida transport vositalarining soni ko`payishi sababli, transport bilan bog`liq bo`lgan muammolar ko`paymoqda. Bunga sabab qilib yo`lning infratuzilmasi va parkovka joylarining yetarli emasligini hamda mavjud parkovka joylari to`g`risida axborotni yetkazadigan tizimning yo`qligini misol qilib keltirish mumkin. Bu bir qancha salbiy oqibatlarga olib kelishi mumkin. Jumladan transport vositalaridan chiqayotgan zaharli moddalarning atrof – muhitga zarari ko`payishiga, yo`lning o`tkazish qobiliyatiga va haydovchining yo`lda ortiqcha vaqt sarflashlarga olib kelishi mumkin.

Yuqoridagi aytib o`tilgan muammolarni bartaraf etish uchun shahar parkovkalarini innovatsion intellektual loyihasini ishlab chiqish va uni hayotga tatbiq etish lozim. Bu intellektual tizim orqali transport vositalari egalari bo`sh parkovka hududlarini osongini topib …

Framework For Extracting And Characterizing Load Profile Variability Based On A Comparative Study Of Different Wavelet Functions, Andrew Parker, Kevin James, Dongming Peng, Mahmoud Alahmad

Durham School of Architectural Engineering and Construction: Faculty Publications

The penetration of distributed energy resources (DERs) on the electric power system is changing traditional power flow and analysis studies. DERs may cause the systems' protection and control equipment to operate outside their intended parameters, due to DERs' variability and dispatchability. As this penetration grows, hosting capacity studies as well as protection and control impact mitigation become critical components to advance this penetration. In order to conduct such studies accurately, the electric power system's distribution components should be modeled correctly, and will require realistic time series loads at varying temporal and spatial conditions. The load component consists of the built …

Methanosarcina Acetivorans Contains A Functional Isc System For Iron-Sulfur Cluster Biogenesis, Thomas M. Deere, Divya Prakash, Faith H. Lessner, Evert C. Duin, Daniel J. Lessner

Biological Sciences Faculty Publications and Presentations

Background

The production of methane by methanogens is dependent on numerous iron-sulfur (Fe-S) cluster proteins; yet, the machinery involved in Fe-S cluster biogenesis in methanogens remains largely unknown. Methanogen genomes encode uncharacterized homologs of the core components of the ISC (IscS and IscU) and SUF (SufBC) Fe-S cluster biogenesis systems found in bacteria and eukaryotes. Methanosarcina acetivorans contains three iscSU and two sufCB gene clusters. Here, we report genetic and biochemical characterization of M. acetivorans iscSU2.

Results

Purified IscS2 exhibited pyridoxal 5′- phosphate-dependent release of sulfur from L-cysteine. Incubation of purified IscU2 with IscS2, cysteine, and iron (Fe2+) resulted …

Turn Trash Into Treasure: Recycling Of Waste Building Materials, Xiaoyin Shen

International Programs

No abstract provided.

An Iot Framework For Modeling And Controlling Thermal Comfort In Buildings, Fadi Alsaleem, Mehari K. Tesfay, Mostafa Rafaie, Kevin Sinkar, Dhaman Besarla, Parthiban Arunasalam

Durham School of Architectural Engineering and Construction: Faculty Publications

Humans spend more than 90% of their day in buildings, where their health and productivity are demonstrably linked to thermal comfort. Building thermal comfort systems account for the largest share of U.S energy consumption. Despite this high-energy cost, due to building design complexity and the variety of building occupant needs, addressing thermal comfort in buildings remains a difficult problem. To overcome this challenge, this paper presents an Internet of Things (IoT) approach to efficiently model and control comfort in buildings. In the model phase, a method to access and exploit wearable device data to build a personal thermal comfort model …

Case Study: Google’S Unique Canopy Styled Construction, Ray A. Cuevas

Construction Management

In today’s rapidly changing world, builders are pushing to implement more sustainable practices and incorporate innovative techniques to integrate green practices into their structures. One of the latest examples of this push towards sustainability is seen in Google’s new headquarters, Charleston East located in Mountain View, California. Combining their widely known mission to provide a positive work environment for their employees with their passion to be more environmentally friendly, Google has set out to create a Living Building with LEED Platinum certification. In order to accomplish this Google has collaborated with Bjarke Ingels Group, Heatherwick Studio, and Hathaway Dinwiddie. The …

Investigating Multidimensional Characteristics Of Noise Signals With Tones From Building Mechanical Systems And Their Effects On Annoyance, Joonhee Lee, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper investigates multidimensional characteristics of tonal noise from heating, ventilation, and air-conditioning systems, besides loudness and tonality, to improve prediction of annoyance. Two studies were conducted: multidimensional scaling (MDS) analysis to determine what other perceptual signal characteristics are important and perceptual weight analysis (PWA) to understand the impact of multiple tones in a signal. In the MDS study, paired comparison tasks were conducted to gather similarity and annoyance data. Results show that the latent perceptual dimensions are related to the signal’s tonality, loudness, sharpness, and roughness. Including metrics for these perceptions, except roughness, improves the performance of earlier annoyance …

A Novel Structural Health Monitoring Method For Reinforced Concrete Bridge Decks Using Ultrasonic Guided Waves, Ece Erdogmus, Eric Garcia, Ahmad Shoaib Amiri, Michael Schuller

Durham School of Architectural Engineering and Construction: Faculty Publications

This article presents the latest improvements in a recently developed nondestructive testing (NDT) approach for early detection of various flaws (corrosion, delamination, and concrete cracking) in reinforced concrete (RC) bridge decks. The proposed method involves the use of internal steel reinforcement as a wave guide for transmitting ultrasonic waves through the system and the measurement of leaked energy from the surface of the concrete. This paper builds upon the progress made in the previously published phases of the project and aims to further explore the capabilities and practicality of the proposed NDT method. Specifically, the limits of propagation distance, effect …

Analysis Of The Variability Of Project Cost And Schedule Performance In The Design-Build Environment, Yunping Liang, Baabak Ashuri, Wei Sun

Durham School of Architectural Engineering and Construction: Faculty Publications

Design-build (DB) projects are getting more implementations in the United States. Several studies indicate that the DB project delivery system has advantages in project cost and schedule performance. Despite having comparative advantages, DB projects are found to be far from immune from cost overruns and schedule delay in those studies. It is critical to understand the effects of various factors underpinning the cost and schedule performance of DB projects. The overall objective of this research is to utilize cluster analysis and statistical analysis to identify factors with significant potentials to describe the variability of project cost and schedule performance in …

Option Value Of Contingent Finance Support In Transportation Public-Private Partnership Projects, Yunping Liang, Baabak Ashuri

Durham School of Architectural Engineering and Construction: Faculty Publications

Uncertainties about construction cost and operational revenues are two major risks in transportation public-private partnership (P3) projects. These uncertainties put projects at risk of being unable to fulfill annual debt repayment obligations. When a project generates insufficient cash flow to service the debt in a certain year, it normally has to go for short-term financing by borrowing short-term loans. With the help of revenue risk-sharing mechanisms, supported projects may be able to get rid of unexpected interest disbursement. The objectives of this paper are twofold: (1) evaluate the refinancing cost of P3 highway projects caused by cash flow shortage and …

An Experiential Online Training Approach For Underrepresented Engineering And Technology Students, Arefeh Mohammadi, Kevin Grosskopf, John Killingsworth

Durham School of Architectural Engineering and Construction: Faculty Publications

Workforce pipelines are essential to sustain a productive workforce in an increasingly competitive, high-tech environment. Advanced automation, sensors, materials and data analytics will increase the need for highly skilled workers in the manufacturing (and manufactured construction) sector. Attracting and developing the next-generation workforce is not without its challenges; however, students are often deficient in technical skills and generally have negative perceptions about manufacturing and construction. As a result, new education and training models have been developed to provide instruction at all levels of the educational system, with a focus on both traditional students and non-traditional students, including ethnic minorities, women, …

Mechanical Connection For Concrete Structures, George Morcous, Raed Tawadrous

Durham School of Architectural Engineering and Construction: Faculty Publications

A system and method for connecting precast concrete structures includes anchoring a sleeve within a pocket formed in one of the concrete structures , and placing the concrete structures in contact with one another such that the pocket is diposed around a protruding end of a shear connector embedded in the other concrete structure . A bridge is inserted around the protruding end of the shear connector and a fastener is installed onto the protruding end of the shear connector to engage the bridge and urge the bridge in abutting relation with a lip of the sleeve . The pocket …

The Design Of Tiny Homes And Their Significance To Simplistic Living, Monica Garcia-Guzman

Undergraduate Honors Theses

This research examines the design of tiny homes and the importance they play in the lives of those that would usually have not been able to afford a house. The research will also focus on designing a tiny home with the use of design software to fully understand the extent of the characteristics of a tiny home. The design of these small dwellings, usually about 400-500 square feet, allows for a minimalist lifestyle that can be very low cost. The same materials that are used in traditional constructed homes are used for tiny homes because it makes them more durable …

The Effect Of Season On Construction Accidents In Saudi Arabia, Abdurahman Ammar

Emirates Journal for Engineering Research

Construction workers are exposed to extreme conditions over a large portion of the work day during the different seasons of the year when working on construction sites. Some studies have discussed the effect of seasonal timing of work-related injuries and concluded that more injuries occur during the summer months [1]. Other studies concluded that accidents are more likely to occur during rainy seasons [2]. Construction accidents data from 2004 to 2011 were obtained from the General Organization for Social Insurance (GOSI). A two way ANOVA analysis showed that there was no significant difference among the years in terms of number …

Workforce Development Through Online Experiential Learning For Stem Education, Arefeh Mohammadi, Kevin Grosskopf, John Killingsworth

Durham School of Architectural Engineering and Construction: Faculty Publications

The U.S. workforce is increasingly comprised of older adults, women, and minorities who lack basic skills and are unable to acquire these skills through traditional educational and training programs. New approaches are needed to provide effective training to the adult learner and flexible support for nontraditional students who must balance work-life demands with limited educational opportunities. Contextualized teaching and learning (CTL) is a form of experiential learning that blends both basic skills and occupational training together in environments that allow students to relate subject matter to real-world situations. Virtual CTL environments can be created to better engage students, provide immediate …

Automated Generation Of Daily Evacuation Paths In 4d Bim, Kyungki Kim, Yong-Cheol Lee

Durham School of Architectural Engineering and Construction: Faculty Publications

Spatial movements of workers and equipment should be carefully planned according to project plans. In particular, it is crucial for workers’ safety to prepare emergency evacuation paths according to changing construction site configurations and construction progress. However, creating evacuation paths for all crews for each day can be an extremely labor-intensive task if it is done manually. Consequently, in most construction projects, evacuation plans are not provided to managers and crews throughout the entire construction. Even state-of-the-art technologies do not suggest ways to generate evacuation paths according to changing progresses presented in 4-Dimensional Building Information Model (4D BIM). This research …

Final Design Review: Mascoma River Greenway Extension, Sebastian Strong, Sarah Atac, Eleanor Dowd, David Ruiz, Isalys Quiñones

ENGS 89/90 Reports

This report outlines current conditions surrounding the extension of the Mascoma River Greenway (MRG) to downtown West Lebanon, NH and recommends a route to completion. Included in the report are maps detailing potential route alignments and recommendations based on outside research and interviews with numerous stakeholders, Lebanon City officials, and community members. The report is intended to provide context and updated insight into the present and future of the MRG, following in the spirit of the 2010 MRG Action Plan, a document that created a vision for redevelopment of the Northern rail corridor and motivated stakeholders to move the project …

Efficient Excitation Of Micro/Nano Resonators And Their Higher Order Modes, N. Jaber, M. A. A. Hafiz, S. N. R. Kazmi, M. H. Hasan, F. Alsaleem, S. Ilyas, M. I. Younis

Durham School of Architectural Engineering and Construction: Faculty Publications

We demonstrate a simple and flexible technique to efficiently activate micro/nano-electromechanical systems (MEMS/NEMS) resonators at their fundamental and higher order vibration modes. The method is based on the utilization of the amplified voltage across an inductor, L, of an LC tank resonant circuit to actuate the MEMS/NEMS resonator. By matching the electrical and mechanical resonances, significant amplitude amplification is reported across the resonators terminals. We show experimentally amplitude amplification up to twelve times, which is demonstrated to efficiently excite several vibration modes of a microplate MEMS resonator and the fundamental mode of a NEMS resonator.

Method Of Monitoring Charge Condition Of Heat Pump System, Fadi M. Alsaleem, Gregg M. Hemmelgarn

Durham School of Architectural Engineering and Construction: Faculty Publications

A heat-pump circuit may include an indoor heat exchanger, an outdoor heat exchanger, a compressor adapted to circulate a working fluid between the indoor and outdoor heat exchangers, and an expansion device disposed between the indoor and outdoor heat exchangers. A monitor for the heat-pump system may include a return-air temperature sensor, a supply-air temperature sensor, and a processor. The return-air temperature sensor may be adapted to measure a first air temperature of air upstream of the indoor heat exchanger. The supply-air temperature sensor may be adapted to measure a second air temperature of air down stream of the indoor …

Voltage And Deflection Amplification Via Double Resonance Excitation In A Cantilever Microstructure, Mohammad H. Hasan, Fadi Alsaleem, Abdallah Ramini

Durham School of Architectural Engineering and Construction: Faculty Publications

Cantilever electrostatically-actuated resonators show great promise in sensing and actuating applications. However, the electrostatic actuation suffers from high-voltage actuation requirements and high noise low-amplitude signal-outputs which limit its applications. Here, we introduce a mixed-frequency signal for a cantilever-based resonator that triggers its mechanical and electrical resonances simultaneously, to overcome these limitations. A single linear RLC circuit cannot completely capture the response of the resonator under double resonance excitation. Therefore, we develop a coupled mechanical and electrical mathematical linearized model at different operation frequencies and validate this model experimentally. The double-resonance excitation results in a 21 times amplification of the voltage …