Environmental Design Commons^™

Thermal And Energy Efficiency Of Roof Tiles Fabricated From Crushed Aluminum Slag And Kaolin Clay For Social Residential Buildings In Egypt, Mohamed E. Elattar

Architectural Engineering

No abstract provided.

Out-Of-Plane Flexural Behavior Of Insulatedwall Panels Constructed With Large Insulation Thicknesses, Jacob Luebke, Fray F. Pozo-Lora, Salam Al-Rubaye, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

Insulated concrete sandwich wall panels (ICSWPs) are gaining popularity as energy regulations become stricter worldwide. ICSWPs are now being constructed with thinner wythes and thicker insulation to keep up with the changing market, which is reducing material costs and increasing thermal and structural efficiency. However, there is a need for adequate experimental testing to validate the current design methods for these new panels. This research aims to provide that validation by comparing the predictions of four different methods with experimental data obtained from six large-scale panels. The study found that while current design methods adequately predict the behavior of thin …

Optimization Of Plastic Waste Integration In Cement Bricks, Yara Salah El-Din El-Metwally

Architectural Engineering

Implementing plastic waste in construction materials is a sustainable disposal method to overcome plastic pollution. The current study aims to optimize the integration of plastic waste in cement bricks regarding their thermomechanical properties in order to develop an eco‑friendly building material. Polyethylene terephthalate (PET) and high‑density polyethylene (HDPE) partially substituted cement with different ratios (0, 2.5, 5, 7.5, 10, 20%). The type that achieved better thermomechanical performance further replaced the other brick components; sand and coarse aggregates to determine the optimum replacement scenario and best design mix. Laboratory experiments have been carried out to measure the compressive strength, indirect tensile …

Outdoor Artificial Lighting Effects On Livability Of Pedestrian Paths In Urban Heritage Context, Chirine Traboulsi, Aya Hassoun, Mostafa Rabea, Mary Felix

BAU Journal - Creative Sustainable Development

Lighting is an important ecological factor that influences individuals’ outdoor activities as well as the development of livable communities in cities. Artificial outdoor lighting is vital in improving the quality of urban open places throughout the nighttime and has a significant impact on the pedestrians' night-time perception and mental safety. This study aims to uncover whether outdoor lighting has indeed an effect on the livability of the pedestrian paths of a community and if so, what is the optimal design that fits an urban heritage setting. The research employs a mixed methods approach, where both qualitative and quantitative methods are …

Upgrading Heritage Urban Public Spaces By Using Recycling Waste Plastic Materials, Aya Mostafa Hassoun, Mostafa Khalifa, Eslam M. Elsamahy, Khaled El-Daghar, Mary Felix

BAU Journal - Creative Sustainable Development

In low-income countries, population expansion and urbanization bring challenges of inadequate living standards to the fore. Some of the issues could be solved if well-functioning plastic recycling systems were built. To reduce the environmental burden and improve the overall situation in dense cities, the already existing local informal waste treatment system, which is widespread in many low-income nations, needs to be developed with efficient sorting and composting solutions. A case study is carried out in the city of Mina, Lebanon, with the goal of establishing a viable decentralized recycling plastic pavilion material. The effort aims to lessen the climate harm …

Linear Waltz With Nature: A Self-Supporting Infrastructure In Nature, Shangkun Zhong

Architecture Senior Theses

This project aims to create a sustainable system that addresses waste management issues in urban areas by examining the functionality of recycling infrastructures and how they can be integrated. The system will absorb waste and convert it into renewable energy to support a field station in Tibet, where self-sustainability is critical, due to the remote location. Architects often demonstrate their understanding of sustainability through various means such as integration, passive/energy-saving, and natural architecture. This thesis argues that a sustainable system such as CopenHill, can exemplify the combination of green-manifested design and recycle content as a sustainable cycle that supports human-nature …

Subterraneans: A Regional Earth Dwelling For Comfort And Beauty, Isaak Benchoff

Architecture Undergraduate Honors Theses

Subterraneans is a study of an affordable, self-sufficient, sustainable, and dignified housing prototype for the region of Northwest Arkansas. It is a design process investigation based on the ideas of turning a local, sustainable material into affordable homes that can be built within a community of people sharing land and resources. The homes would utilize as many natural materials as possible to minimize the impact on the Earth and the cost to the owners.

Research looked at many different vernacular building precedents as well as the work done by contemporary design firms in the area of economical, low-impact, and passively …

Energy Efficient Integrated Mems Neural Network For Simultaneous Sensing And Computing, Hamed Nikfarjam, Mohammad Megdadi, Mohammad Okour, Siavash Pourkamali, F. M. Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

Biological systems seamlessly combine multiple functions in lightweight and energy-efficient structures. Such capability in synthetic structures would be desirable in numerous engineering applications such as aerospace, robotics and wearable devices. Here we report an integrated silicon-based structure configured to sense, perform different classification algorithms, and produce an action signal within the same physical layer. The algorithms are coded in the mechanical responses of the sensing elements of multiple coupled micro-electromechanical systems (MEMS), simultaneously capturing acceleration measurements to produce an actuated signal. This all-in-one structure operates with zero circuitry and low power consumption. As a demonstration, we designed and fabricated a …

Law School News: Joyce And Bill Cummings Of Cummings Foundation To Deliver Keynote Address At Rwu Commencement 4-20-2023, Jill Rodrigues

Life of the Law School (1993- )

No abstract provided.

Earthquake Resistant Buildings, Admin Stem For Success

STEM for Success Showcase

Students learn about earthquakes and engineering by building a structure that can survive an earthquake.

Reconfigurable Metatiles With Circular Maze-Like Space-Coiling-Based Acoustic Metastructure For Low-To-Mid Frequency Sound Attenuation, Sanjay Kumar, Heow Pueh Lee

Durham School of Architectural Engineering and Construction: Faculty Publications

This study presents a compact, lightweight, and reconfigurable acoustic metatile for sound mitigation applications. The metatile prototype is designed based on a circular maze-like acoustic metastructure, which utilizes a space-coiling technique for enhanced acoustic performance in low-to-mid frequencies. The proposed labyrinthine acoustic metadisk structure comprises a central hollow front face sheet and two coiling-up backing cavities. Experimental results show that the metadisk has high absorption peaks of 0.81 and 0.75 at 574 and 1436 Hz, respectively, and exhibits high sound transmission loss (STL) values (≥25 dB) in separate wide frequency bands between 100–580 Hz and 820–1600 Hz. Based on the …

Structural Testing Of Concrete Walls On-Edge With Combined Axial And Out-Of-Plane Loading, Salam Al-Rubaye, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

Full-scale testing of structural components can be time consuming and difficult. The design of full- scale slender concrete walls is highly influenced and controlled by second-order and out-of-plane bending loads. Previous experiments on out-plane bending of slender walls and insulated walls have been performed with bending in the direction of gravity (with or against). Additionally, most of the research considering out-of-plane bending does not include an axial load and suffers from inaccurate results due to not simulating the actual loading and constraining conditions or safety issues. This testing method was developed expressly for the determination of slender wall behavior in …

Relationships Between Residence Characteristics And Nursing Home Compare Database Quality Measures, Brian J. Puckett, Erica E. Ryherd, Natalie Manley, Carey S. Ryan

Durham School of Architectural Engineering and Construction: Faculty Publications

Objective: This study evaluated relationships between physical characteristics of nursing home residences and quality-of-care measures.

Design: This was a cross-sectional ecologic study. The dependent variables were 5 Centers for Medicare & Medicaid Services (CMS) Nursing Home Compare database long-stay quality measures (QMs) during 2019: percentage of residents who displayed depressive symptoms, percentage of residents who were physically restrained, percentage of residents who experienced 1 or more falls resulting in injury, percentage of residents who received antipsychotic medication, and percentage of residents who received anti-anxiety medication. The independent variables were 4 residence characteristics: ownership type, size, occupancy, and region …

Improving The Thermal Performance And Energy Efficiency Of Buildings By Incorporating Biomass Waste Into Clay Bricks, Mohamed E. Elattar

Architectural Engineering

No abstract provided.

Biomimicry As An Urban Challenge In Shaping The Future Of Cultural Communities, Nora M. Rehan

Architecture and Planning Journal (APJ)

The cultural identity of urban communities is the main expression of historical privacy and shapes societies’ past, present, and future. It is an entity of cultural and knowledge accumulation stemming from the community's traditions and customs, which help to consolidate the social fabric and play an important role in the lives of individuals and the planning and development processes. Urban areas with cultural and heritage values are the most important competitive advantages of urban cities that are considered as a primary nucleus for achieving sustainability on a broader scale for the neighboring regions. One of the most important of those …

Effect Of Green Facade On The Urban Microclimate With Different Street Canyon, Aya Mostafa Hassoun, Mary Felix

Architecture and Planning Journal (APJ)

Using simulation tools, this study investigates the effect of green walls (GWs) on the urban heat island (UHI) phenomenon within different street sizes. It can be planted without taking up more area and could enhance the microclimate environment, which is why it has a wide range of use potential in urban areas. Because Mina City has a threat of UHI, it was chosen for this study. The temperature within various street sizes in the research region was evaluated using only software called ENVI-met that simulates climate, and three common scenarios were chosen. In the first experiment, green walls extending over …

Analysis And Design Of Lateral Framing Systems For Multi-Story Steel Buildings, Husam Al Dughaishi, Jawad Al Lawati, Moad Alosta, Shaker Mahmood, Mohamed Faisal Al-Kazee, Nur Izzi Md Yusoff, Abdalrhman Milad

Durham School of Architectural Engineering and Construction: Faculty Publications

This study focused on identifying the most appropriate structural system for multi-story buildings and analyzing its response to lateral loads. The study analyzed and compared the different structural systems to determine the most suitable option. The study aims to utilize three lateral framing systems (moment, braced, and diagrid) in order to investigate which system needs the least amount of steel to meet the design requirements. Thus, in order to determine the estimated steel savings of this system as compared to the moment and braced frames, the four-story and eight-story buildings that are 96' × 96' in the plane and utilize …

Precious Plastics - Plastic Brick Machine Fabrication, Timothy Ukaobasi Kanu, Evi Paraskevi Troulis

Architectural Engineering

The goal of this research is to determine the structural parameters of the recycled plastic polypropylene when molded into bricks resembling CMU blocks. To accomplish this, three mechanisms had to be assembled: the shredder, the injector, and the 1x1 mold. A tensile and compression test were to be performed on the plastic brick, and the values would be used to compare the tensile and compressive strength of PP plastic bricks, as well as their modulus of elasticity and stress vs. Strain performance. These values would be analyzed to determine whether it would be feasible to build an entire plastic wall. …

A Framework To Predict Variability Characteristics In Building Load Profiles, Sam Moayedi, Andrew Parker, Kevin James, Xiaoyue Cheng, Michael Hempel, Hamid Sharif, Mahmoud A. Alahmad

Durham School of Architectural Engineering and Construction: Faculty Publications

The expansion of Advanced Metering Infrastructure (AMI) has provided building operators and researchers detailed information on building energy consumption. The majority of AMI systems, however, record data at relatively low resolutions of 15, 30, or 60 minutes, due to cost, storage and bandwidth limitations. Emerging applications in power flow analysis, Quasi-Static Time-Series Simulation (QSTS), smart grid integration and load matching, however, require data at higher resolutions. Short-term energy demand can deviate significantly from long-term averages, with an unknown magnitude and frequency when only low-resolution load profile data is available. This paper presents a novel data-driven approach to predict characteristics of …

Integration Of Real-Time Semantic Building Map Updating With Adaptive Monte Carlo Localization (Amcl) For Robust Indoor Mobile Robot Localization, Matthew Peavy, Pileun Kim, Hafiz Oyediran, Kyungki Kim

Durham School of Architectural Engineering and Construction: Faculty Publications

A robot can accurately localize itself and navigate in an indoor environment based on information about the operating environment, often called a world or a map. While typical maps describe structural layouts of buildings, the accuracy of localization is significantly affected by nonstructural building elements and common items, such as doors, appliances, and furniture. This study enhances the robustness and accuracy of indoor robot localization by dynamically updating the semantic building map with non-structural elements detected by sensors. We propose modified Adaptive Monte Carlo Localization (AMCL), integrating object recognition and map updating into the traditional probabilistic localization. With the proposed …

Dissipated Hysteretic Energy Reconstruction For High-Resolution Seismic Monitoring Of Instrumented Buildings, Milad Roochi, Eric M. Hernández, David V. Rosowsky

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper proposes a high-resolution seismic monitoring framework that employs dissipated energy as a feature for damage detection and localization in instrumented building structures. The the methodology consists of (1) implementing a nonlinear state observer to reconstruct the dynamic response at all degrees of freedom (DoF) of a structural model, (2) employing the reconstructed response to estimate element-by-element forces and displacements, and (3) using estimated displacement, forces, and constitutive laws to estimate elementlevel dissipated energy. The main advantages of the proposed energy-based approach are that i) the proposed feature is physically meaningful and correlates well with the level of cyclic …

Integrating Life-Cycle Analysis Into Civil Infrastructure Resilience Decision Making: Illustrative Application To Seismic Resilience Modeling Of Us Communities, Milad Roohi, Jiate Li, W. Van De Lindt

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper aims to integrate life-cycle analysis into civil infrastructure resilience modeling and decision-making in seismic-prone communities. To achieve this aim, the authors present a methodology for modeling seismic life-cycle resilience of interdependent buildings and lifeline systems and subsequently informing resilience decisions directly related to the maintenance and retrofit of interdependent infrastructure to enhance a community’s physical, social, and economic systems. The methodology consists of 1) community data collection, 2) seismic hazard analysis, 3) physical damage analysis, and 4) system-level functionality and restoration analysis, 5) socio-economic impact analysis, 6) life-cycle optimization and retrofit decisionmaking. The methodology begins by developing geospatial …

A Review On Sustainable Disposal Of Plastic Waste By Integration In Construction Materials, Yara S. El-Metwally, Iman El-Mahallawi, Khaled M. Dewidar, Mostafa R. Refaat

Architectural Engineering

Over the last decades, plastic waste (PW) has increased exponentially and has become a serious threat to our planet, aquatic system and human health. Recycling or reusing PW in producing ecofriendly materials is an efficient solution to reduce plastic pollution and to minimize the depletion of raw materials as well. Previous studies have shown promising potentials of using PW in the construction sector, such as binder, aggregate, or substitute of cement and sand in concrete, brick or mortar. Laboratory results indicate that implementing plastic waste as aggregates in cement composites obtains higher thermal resistance and acoustical performance. However, a reduction …

Energy Efficiency Retrofit And Decarbonization Of Old And Historic Buildings In California, Daria Nikolaeva

Master's Projects and Capstones

Buildings are responsible for almost 40% of total global greenhouse gas emissions and the retrofitting of existing buildings is an essential part of solving the problem. About 75% of buildings in Californian were constructed before the first energy-efficiency building code was adopted in 1978. Old buildings are inefficient, responsible for large carbon footprints and must be retrofitted to stay on track with the state's climate targets. However, current policies do not require substantial changes and tend to favor historic preservation over energy efficiency, missing improvement opportunities. Recognizing the significance of carbon intensity, the 2019 California Energy Efficiency Action Plan shifted …

Applying Unsupervised Machine Learning Clustering Techniques To Early Childcare Soundscapes, Kenton Hummel, Erica E. Ryherd, Iason Konstantzos, Abbie Raikes

Durham School of Architectural Engineering and Construction: Faculty Publications

Early childhood is a critical time period for language, brain, cognitive, and social/emotional development. Out-of-home childcare is a normative, typical experience for millions of young children. Although Indoor Environmental Quality (IEQ) in K-12 settings has received recent, significant attention, the links between IEQ and children’s learning and development in early childcare settings is a less understood topic. This work focuses specifically on the sound aspect of IEQ in early childcare settings to better understand typical noise levels and occupant experience. Standard approaches to analyzing background noise will be presented alongside more detailed statistical analyses utilizing unsupervised machine learning clustering techniques. …

Tectonic Thresholds: Reclaiming Space Through Geomorphological Design, Amreeta Verma

Architecture Thesis Prep

This research posits that a revitalization of indigenous earth architecture practices in a contemporary context can mitigate the immense waste and embodied carbon in the construction industry. Earth materials are the focus of this research because they are locally sourced, abundantly available, and can be reused or returned to the natural environment, when utilized in a circular consumption cycle. Designing for reuse reduces the impact of construction waste on the burgeoning issue of environmental degradation and resource depletion.

The structural viability and environmental enclosure capabilities of soil throughout its lifecycle will be tested in different forms derived geomorphically from the …

The Ark: Sanctuary For Isfs, Zejun Sun, Wei Wei Li

Architecture Thesis Prep

The thesis is aiming to decrease the potential flooding damages to the ISFs, and a balance between the limited resources and high population density to relieve the flooding issues through the renovation and reconstruction of local churches in the Baseco Compound.

Flooding has become one of the most common and devastated issues in developing countries, and it is worsen by the housing crisis that lead to a formation of informal settlements with shoddy constructions and destabilized communities. What is an applicable approach to decrease the potential flooding damage to the ISFs? How to find a balance between the limited resources …

Use Of Precious Plastic Method Of Bricks For The Construction Of Tiny Homes, Haylie E. Tallon

Architectural Engineering

Precious Plastics, a Netherlands based company, created an open source project that can be used to create different objects from recycled plastics. The San Luis Obispo area has a large amount of recyclable plastic that is being treated as trash, adding to the pollution of the ocean and the air. This project is to determine the necessary steps to create plastic building blocks, using the Precious Plastic process, as a construction material for low-income, temporary housing. This report covers the process that was used to build two of the machines that will be used to create the bricks. This requires …

Dissolve Of Living Space: Living Space Under The Development Of Metaverse, Wenting Feng, Nuo Lyu

Architecture Thesis Prep

According to our vision, in the future, after the use of the metaverse becomes popular, we will spend a lot of time working, living and playing in the metaverse. The space needed in reality will be reduced by the use of the metaverse, and public buildings will be retained or not depending on the nature of the building. Because the focus of human life shifts from reality to the metaverse, energy and material consumption will also be reduced, and environmental problems can be properly alleviated. The nature in the real city will also be expanded by the reduction of the …

Foreign Object Debris Detection For Airport Pavement Images Based On Self-Supervised Localization And Vision Transformer, Travis Munyer, Daniel Brinkman, Xin Zhong, Chenyu Huang, Iason Konstantzos

Durham School of Architectural Engineering and Construction: Faculty Publications

Supervised object detection methods provide subpar performance when applied to Foreign Object Debris (FOD) detection because FOD could be arbitrary objects according to the Federal Aviation Administration (FAA) specification. Current supervised object detection algorithms require datasets that contain annotated examples of every to-be-detected object. While a large and expensive dataset could be developed to include common FOD examples, it is infeasible to collect all possible FOD examples in the dataset representation because of the openended nature of FOD. Limitations of the dataset could cause FOD detection systems driven by those supervised algorithms to miss certain FOD, which can become dangerous …