Icms3 Explainer Infographic, Conor Shaw, James O'Donnell

Tools

International standardisation is important for consistency in climate and financial governance. EU and Irish policy is moving to require Life Cycle Costing (LCC) and Life Cycle Carbon Emissions (LCCE) reporting.

Green Building Information Modeling Framework For Sustainable Residential Development In Egypt, Mohamed Ahmed Nabawy Dr., Ahmed Gouda Mohamed, Ahmed Osama Daoud Dr.

Civil Engineering

first_page Download PDF settings Order Article ReprintsOpen AccessArticle

Green Building Information Modeling Framework for Sustainable Residential Development in Egypt

by Mohamed Nabawy *, Ahmed Gouda Mohamed , Israa Awad and Ahmed Osama Daoud * Construction Engineering and Management Programme, Civil Engineering Department, Faculty of Engineering, The British University in Egypt (BUE), El Sherouk City, Cairo 11837, Egypt * Authors to whom correspondence should be addressed. Buildings 2025, 15(7), 1035; https://doi.org/10.3390/buildings15071035 Submission received: 20 January 2025 / Revised: 23 February 2025 / Accepted: 27 February 2025 / Published: 24 March 2025 (This article belongs to the Special Issue Building …

Production Of Alinite-Chlormayenite Clinker And Its Hydration Behavior With Increasing Gypsum Content, Marco Simoni, Aniruddha Baral, Zhili Ren, Tristana Y. Duvallet, Robert B. Jewell, Christiane Rößler, Theodore Hanein

Earth and Environmental Sciences Faculty Publications

An alternative low-energy alinite-chlormayenite clinker was produced and its hydration with different gypsum content was studied. The clinker was produced at 1225 ◦C using reagent-grade materials in an electric kiln with alinite, larnite, and chlormayenite content of 48, 24, and 16 wt%, respectively. The hydration kinetics of the clinker with different gypsum additions (0,10, 20, and 40 wt%) did not have a distinct induction period, and the hydration was faster than Portland cement. Alinite was in general more reactive than chlormayenite. In the presence of a limited amount of gypsum (10 and 20 wt%), alinite consumed gypsum to form ettringite …

Case Study: Cal Poly Housing Program (Cphp) - Student Housing Project At California Polytechnic University, San Luis Obispo, Aidan Michael Toole

Construction Management

Full volumetric modular construction is a building technique that involves the off-site prefabrication of three-dimensional modular units, which are later transported and assembled on-site. California Polytechnic State University in San Luis Obispo and general contractor, Whiting-Turner, are building new on-campus student housing by utilizing full volumetric modular construction techniques. The buildings will be produced in modules that, when put together, reflect the identical design and intent of a site-built building. This paper will analyze the effectiveness of modular construction on a large-scale project and look at the project cost, schedule, and waste impacts from choosing this approach. The main driver …

Building Services Engineering January/February 2025

Building Services Engineering

No abstract provided.

Bim-Intergrated Simulation Framework For Carbon Emission During Construction, Philip Cheffa

LSU Master's Theses

The construction sector is a major contributor to global carbon emissions, responsible for approximately 39% of energy-related emissions. This research introduces an innovative BIM-integrated simulation framework to estimate and manage carbon emissions during construction. Leveraging 4D Building Information Modeling (BIM), the study integrates critical dimensions of time, cost, and carbon emissions into a cohesive framework. A mathematical model was developed to quantify carbon emissions from construction activities, including equipment utilization and workforce energy consumption, with RSMeans data providing cost and productivity metrics.

The framework was validated through a case study that compared alternative work schedules utilizing different resources to evaluate …

Experimental And Analytical Study On Shear Bond Behaviour Of Lightweight Concrete Composite Deck Slab With Shear Connectors, Mohaned Mohy El-Deen Hassan, Khaled Abdullah Gharib, Hanan Hussain Altobgy

Journal of Engineering Research

This study investigates the bond strength between lightweight concrete and steel elements in composite deck slabs, with a focus on enhancing bond performance through the use of shear connectors. The primary objective was to improve the interface behavior between lightweight concrete and steel corrugated sheets by introducing shear connectors between the composite slab and supporting steel beams. Both experimental and analytical methods were employed. Experimentally, twelve lightweight concrete specimens were fabricated and divided into two groups: one without shear connectors and the other with shear connectors. Each group was further classified into specimens with long and short spans. These specimens …

Evaluating Energy Efficiency And Thermal Performance In Egypt’S Social Housing: Climate-Responsive Design And Material Impact In Hot Desert Environments, Ahmed M. Hanafi, Mohamed A. Moawed, Osama E. Abdullatif

Journal of Engineering Research

As Egypt's urban areas expand rapidly, the demand for energy-efficient, affordable housing in extreme hot desert climates has become increasingly urgent. This study investigates the energy efficiency and thermal performance of Egypt’s Social Housing Project, with a focus on residential building in New Aswan City, where summer temperatures frequently exceed 45°C. Employing a validated energy model, this research simulates annual energy consumption for the building, which comprises 24 residential units, each approximately 86 m². The model integrates realistic occupancy schedules, region-specific weather data, and common household behavior patterns to closely reflect actual energy usage. Findings indicate a high alignment between …

Education And Industry: The Balancing Act, Roy Vincent Byrne, Seamus Harrington

Other resources

Quantity Surveying students are required to study a vast spectrum of modules during their programme of study. Perhaps one of the most important taught modules on a Quantity Surveying programme and a core professional competency relates to building measurement. Many early stage quantity surveying students are introduced to building measurement via the concept of manual take-off which offers students a good grounding in the basic skills and good practices required to successfully measure a building project. However, manual measurement ultimately is no longer used in practice in any meaningful capacity and teaching it is a time-consuming process. The research explores …

Adaptation For Whom? Understanding The Impacts Of Dyke Policies On Small-Scale Farmers In Ca Mau Province Of Vietnam, Nguyen Minh Quang, Nguyen Van Minh, Nguyen Vo Chau Ngan, Martha B. Lerski

Publications and Research

Low-lying deltas worldwide are extremely vulnerable to sea-level rise. As the risks of climate-induced flooding become increasingly clear, the thirst for infrastructure-driven adaptation increases. This highlights a patent need to understand the impacts of engineering adaptation solutions, especially those targeting built structures such as dykes and sluices, on farmers from a bottom-up, farmer-centred perspective. The study addresses this call by examining cases where dyke policies, while successful in some dimensions, have undermined small-scale farmer livelihoods in Ca Mau ― Vietnam’s southernmost rural province. It identifies areas in need of attention and adds empirical data related to this group of farmers. …

A First Model Foundation Design Of Wood Pillar In Banjarmasin Swampland, Nursyarif Agusniansyah, Gusti Novi Sarbini, Akbar Rahman, Muhammad Tharziansyah

ASEAN Journal on Science and Technology for Development

Banjarmasin's swampland presents distinct characteristics that make it suitable for constructing homes, but it also requires special attention, especially concerning the foundation. The soil in this area often has extremely low carrying capacity, which poses a significant challenge for construction. Mistakes in choosing construction materials, coupled with mismatched building loads and inadequate foundation functions, often result in foundation failures—a common cause of building collapses. As the complexity and functionality of buildings increase, the need for more thoughtful house design becomes more crucial. The commonly used wooden pile foundation, while popular, has limited load-bearing capacity, necessitating modifications to enhance its strength. …

Green Project Finance For Infrastructure And Building Construction: Instruments And Benchmarks, Yunping Liang

Durham School of Architectural Engineering and Construction: Faculty Publications

It is counterintuitive that both the practice and research on green project finance for infrastructure and building construction are ascendant and still have limited precedents, considering that individually, the two parts (i.e., project finance and sustainability in the built environment) are both familiar to the communities. To narrow the gap and facilitate the financing of the built environment’s sustainable transformation, this study systematically reviews the common instruments for financing green infrastructure and building projects. Benchmarking questions distinguishing the profile of green project finance from common construction project finance are developed based on the literature review and then are used for …

Business Model Evaluation Of Renewable Energy Community In Multi Unit Residential Building In Canada Net Metering, Considering The Regulatory Framework, Ownership And Organizational Structure, Zahra Keshavarz Moraveji, Yunping Liang, Ursula Eicker

Durham School of Architectural Engineering and Construction: Faculty Publications

Renewable Energy Community (REC) is an emerging concept that empowers local customers to generate decentralized renewable energy. Integrating RECs into the building industry presents a promising opportunity to support the transition toward net-zero cities. However, the viability of RECs depends on regional regulatory frameworks, permitted governance structures, and very importantly, business models. Compared to pioneering European countries, Canada lacks the regulatory support needed to fully enable REC. This paper proposes and evaluates various business models for potential REC implementations under Canada's existing regulatory constraints. The analyzed models focus on "behind-the-meter" electricity distribution, a multi-stakeholder type of REC, where generation occurs …

Developing Entrepreneurial Mindsets In Construction Management Through Experiential Projects, Dalya Ismael

Engineering Technology Faculty Publications

Entrepreneurial Minded Learning (EML), a framework supported by the Kern Entrepreneurial Engineering Network (KEEN), promotes critical thinking and innovation by encouraging students to explore real-world problems through the 3Cs: Curiosity, Creating Value, and Connections. In construction management education, the focus often remains on technical skills and project execution, neglecting the development of entrepreneurial skills like adaptability, value creation, and stakeholder engagement, leaving a gap in preparing students for the challenges of the industry. To bridge this gap, micro-moment activities were introduced prior to the main project to prime students for EML-based thinking. These short, focused exercises encouraged students to solve …

Understanding Roof Systems Of Metal Buildings, Michael W. Seek, Vincent E. Sagan

Engineering Technology Faculty Publications

[Introduction] A metal building is a system with complex behavior that, when properly accounted for, provides an efficient structural solution. To help the engineer properly design for this behavior, the Metal Building Manufacturers (MBMA) has recently released the Roof Framing Design Guide for Metal Building Systems, 2nd Edition (Roof Framing Design Guide).

From Equitable Access To Equitable Usage: Moving Towards Data-Driven, Evidence-Based Cycling Assets Management, Kewei Ren, Yunping Liang, Chun-Hsing Ho

Durham School of Architectural Engineering and Construction: Faculty Publications

Cycling is increasingly recognized for its wide range economic, environmental, and health benefits as a mobility option. However, disparities in the provision and the quality of bicycle infrastructure persists. Ensuring fair access and usage of these benefits for all presents a significant challenge. As a result, establishing effective methodologies to evaluate cycling equity is critically important. This paper synthesizes research on infrastructure asset management with a focus on equity considerations in bicycle infrastructure. A systematic review of 19 North American studies critically examines how existing research categorizes vulnerable populations and assesses fairness. The results reveal that most existing analyses focus …

A Digital Paradigm For Shaping Smart Sustainable New Cities In Egypt, Hayam M. Omayer, Eman H. Ayad

Mansoura Engineering Journal

Shaping the future of cities is a crucial responsibility that depends on today’s developers and designers. In light of the ongoing technological advancements across all fields, cities are obliged to harness this accelerated continuous progress to rescue from global challenges facing communities. Rapid urbanization, population growth, fragile infrastructure, and many other threatening environmental issues have prompted many governments across the world to expedite the digital transformation of cities to achieve sustainable urban progression. In Egypt, planning for smart cities is still taking its first step. Various significant economic, environmental, and social challenges are confronted. This research explores the pivotal role …

Temporal Analysis Of Construction Safety Incidents In Southeastern U.S. Using Machine Learning Techniques, Mayowa O. Oladele

College of Graduate Studies: Theses & Dissertations

Construction safety incidents remain a significant concern, particularly in the Southeastern U.S. due to the high-risk nature of the industry. Analyzing patterns in these incidents can help improve safety practices and reduce accidents. Machine learning (ML) techniques were employed in this study to identify temporal patterns in construction safety incidents, aiming to enhance proactive safety management. The machine learning methods used in this research included logistic regression, decision trees, random forest, support vector machine (SVM), and K nearest neighbors (KNN).

The objective of the study was to analyze temporal trends in safety incidents and identify the most effective machine learningtechnique …