Construction Engineering Commons^™

Ua3/2/3 President's Office-Garrett Building File, Wku Archives

WKU Archives Collection Inventories

Artificial collection related to the construction of Cherry Hall and the Kentucky Building using Works Progress Administration funds.

Ua1c2/37 Facilities Services & Heating Plant Photos, Wku Archives

WKU Archives Collection Inventories

Images of Facilities Services and the Heating Plant.

Ua1c2/46 Maintenance Service Building Photos, Wku Archives

WKU Archives Collection Inventories

Images of the Maintenance Service Building

Ua66/9/1 Ogden College Of Science & Engineering Engineering Administration, Wku Archives

WKU Archives Collection Inventories

No abstract provided.

Ua3/1/5/2 President's Office-Cherry Campus Buildings, Wku Archives

WKU Archives Collection Inventories

Records created by the President's Office during the Henry Hardin Cherry administration regarding the construction and maintenance of buildings.

Ua1c2/27 Environmental Sciences & Technology Building Photos, Wku Archives

WKU Archives Collection Inventories

Images of the Environmental Sciences & Technology building.

Ua1c11/102 Wku Planning, Design & Construction Photo/Video Collection, Wku Archives

WKU Archives Collection Inventories

Photographs and video created by WKU Planning, Design and Construction.

Ua1c2/17 Cravens Graduate Center & Library Photos, Wku Archives

WKU Archives Collection Inventories

Images of the Cravens Graduate Center & Library.

Ua1c2/2 Academic Complex Photos, Wku Archives

WKU Archives Collection Inventories

Images of the Academic Complex.

Efficient Excitation Of Micro/Nano Resonators And Their Higher Order Modes, N. Jaber, M. A. A. Hafiz, S. N. R. Kazmi, M. H. Hasan, F. Alsaleem, S. Ilyas, M. I. Younis

Durham School of Architectural Engineering and Construction: Faculty Publications

We demonstrate a simple and flexible technique to efficiently activate micro/nano-electromechanical systems (MEMS/NEMS) resonators at their fundamental and higher order vibration modes. The method is based on the utilization of the amplified voltage across an inductor, L, of an LC tank resonant circuit to actuate the MEMS/NEMS resonator. By matching the electrical and mechanical resonances, significant amplitude amplification is reported across the resonators terminals. We show experimentally amplitude amplification up to twelve times, which is demonstrated to efficiently excite several vibration modes of a microplate MEMS resonator and the fundamental mode of a NEMS resonator.

Method Of Monitoring Charge Condition Of Heat Pump System, Fadi M. Alsaleem, Gregg M. Hemmelgarn

Durham School of Architectural Engineering and Construction: Faculty Publications

A heat-pump circuit may include an indoor heat exchanger, an outdoor heat exchanger, a compressor adapted to circulate a working fluid between the indoor and outdoor heat exchangers, and an expansion device disposed between the indoor and outdoor heat exchangers. A monitor for the heat-pump system may include a return-air temperature sensor, a supply-air temperature sensor, and a processor. The return-air temperature sensor may be adapted to measure a first air temperature of air upstream of the indoor heat exchanger. The supply-air temperature sensor may be adapted to measure a second air temperature of air down stream of the indoor …

Voltage And Deflection Amplification Via Double Resonance Excitation In A Cantilever Microstructure, Mohammad H. Hasan, Fadi Alsaleem, Abdallah Ramini

Durham School of Architectural Engineering and Construction: Faculty Publications

Cantilever electrostatically-actuated resonators show great promise in sensing and actuating applications. However, the electrostatic actuation suffers from high-voltage actuation requirements and high noise low-amplitude signal-outputs which limit its applications. Here, we introduce a mixed-frequency signal for a cantilever-based resonator that triggers its mechanical and electrical resonances simultaneously, to overcome these limitations. A single linear RLC circuit cannot completely capture the response of the resonator under double resonance excitation. Therefore, we develop a coupled mechanical and electrical mathematical linearized model at different operation frequencies and validate this model experimentally. The double-resonance excitation results in a 21 times amplification of the voltage …

Benchmarking Image Processing Algorithms For Unmanned Aerial System-Assisted Crack Detection In Concrete Structures, Sattar Dorafshan, Robert J. Thomas, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper summarizes the results of traditional image processing algorithms for detection of defects in concrete using images taken by Unmanned Aerial Systems (UASs). Such algorithms are useful for improving the accuracy of crack detection during autonomous inspection of bridges and other structures, and they have yet to be compared and evaluated on a dataset of concrete images taken by UAS. The authors created a generic image processing algorithm for crack detection, which included the major steps of filter design, edge detection, image enhancement, and segmentation, designed to uniformly compare dierent edge detectors. Edge detection was carried out by six …

Remotely Testing Whether A Climate Control System Controller Is Correctly Installed, Fadi M. Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

Disclosed are exemplary embodiments of apparatus and methods for remote testing of controllers such as thermostats, to detect incorrect climate control system configuration parameters . In an exemplary embodiment, a computer wirelessly connects with a remote thermostat and sends signal (s) to the thermostat instructing the thermostat to perform climate control function (s) in predefined sequence (s). The computer receives signal (s) from the thermostat indicating whether the thermostat is performing the climate control function (s) in accordance with the sent signal (s). Based on the signal (s) received from the thermostat, the computer determines whether the thermostat is configured …

Ua66/2 Ogden College Of Science & Engineering Architectural & Manufacturing Sciences, Wku Archives

WKU Archives Collection Inventories

Records created by the Architectural & Manufacturing Sciences.

Files are arranged in the following subseries:

1. Administration
2. Publications
3. Centers & Institutes

Ua3/3/7 President's Office-Thompson Scrapbooks, Wku Archives

WKU Archives Collection Inventories

Scrapbooks created during Kelly Thompson's tenure as president of WKU.

Ua30/1/3 Planning, Design & Construction Capital Construction Disbursements & Receipts, Wku Archives

WKU Archives Collection Inventories

This series documents the disbursement of funds for capital construction projects at WKU. As defined by KRS 7A.010 (1), capital project means (a) any undertaking which is to be financed or funded through an appropriation by the General Assembly of general fund, road fund, bond fund, trust and agency fund, or federal funds; (b) any undertaking which is to be financed by a capital expenditure for use by state government or one of its departments or agencies; (c) any capital construction item, or combination of items necessary to make a building or utility installation complete, estimated to cost $600,000 or …

Ua1c2/16 College Heights Foundation Buildings Photos, Wku Archives

WKU Archives Collection Inventories

Images of the College Heights Foundation Buildings.

Ua1c2/23 East Hall Photos, Wku Archives

WKU Archives Collection Inventories

Images of the East Hall.

Ua1c2/28 Craig Alumni House Photos, Wku Archives

WKU Archives Collection Inventories

Images of Craig Alumni House formerly the president's home.

Ua1c2/38 Helm Library Photos, Wku Archives

WKU Archives Collection Inventories

Images of Helm Library. The building was originally constructed and used as the Physical Education building 1931-1964. All images are in this series.

Ua1c2/47 Kentucky Building Photos, Wku Archives

WKU Archives Collection Inventories

Images of Kentucky Building.

Ua1c2/11 West Hall Photographs, Wku Archives

WKU Archives Collection Inventories

Images of West Hall which became Southwest Hall.

Ua1c2/13 Cherry Hall 1937+ Photographs, Wku Archives

WKU Archives Collection Inventories

Images of the Cherry Hall.

Need For Aeromedical Evacuation High-Level Containment Transport Guidelines, Shawn G. Gibbs, Jocelyn J. Herstein, Aurora B. Le, Elizabeth L. Beam, Theodore J. Cieslak, James V. Lawler, Joshua L. Santarpia, Terry L. Stentz, Kelli R. Kopocis-Herstein, Chandran Achutan, Gary W. Carter, John J. Lowe

Durham School of Architectural Engineering and Construction: Faculty Publications

Circumstances exist that call for the aeromedical evacuation high-level containment transport (AE-HLCT) of patients with highly hazardous communicable diseases. A small number of organizations maintain AE-HLCT capabilities, and little is publicly available regarding the practices. The time is ripe for the development of standards and consensus guidelines involving AE-HLCT.

Hvac System Remote Monitoring And Diagnosis, Jeffrey N. Arensmeier, Gregg M. Hemmelgarn, Fadi M. Alsaleem, Priotomo Abiprojo

Durham School of Architectural Engineering and Construction: Faculty Publications

A monitoring system for an HVAC system of a building includes a monitoring server located remotely from the building. The monitoring server receives, from a device installed at the building, (i) time-domain current data based on a measured aggregate current supplied to a plurality of components of the HVAC system, and (ii) data based on frequency-domain current data of the measured aggregate current. Based on the received data, the monitoring server accesses (i) whether a failure has occurred in a first com ponent of the plurality of components and (ii) generates a preliminary advisory in response to determining that the …

Strategies And Resources For Government Agencies To Utilize Disadvantaged Business Enterprises In Transportation Design-Build Projects, Baabak Ashuri, Adjo Amekudzi-Kennedy, Stephanie Amoaning-Yankson, Yunping Liang, Yang Cao

Durham School of Architectural Engineering and Construction: Faculty Publications

The Disadvantaged Business Enterprise (DBE) Program was established to provide opportunities for businesses owned and controlled by socially and economically disadvantaged individuals, such as minority-owned and women-owned businesses, to participate in federally funded transportation-related projects. Such DBE participation has increasingly been achieved over the years with the appropriate guidance for traditional project delivery: design-bid-build. However, in recent times the onset of alternative project delivery methods, such as design-build (DB), has introduced challenges for state DOTs trying to implement the DBE program using traditional approaches. This paper presents a synthesis of strategies and resources being used in state DOTs to achieve …

Skip This Chore: Cleaning Your Air Conditioner Condenser Probably Won't Make It Work Better, David Yuill

Durham School of Architectural Engineering and Construction: Faculty Publications

I asked my neighbor who hoses off his air conditioner condenser every spring why he does it. “Because my dad always told me I had to,” he said.

Conventional wisdom like what my neighbor’s dad imparted may always seem right. But through my HVAC scholarship – the study of heating, ventilation and air-conditioning systems – I’ve learned that this particular presumption is probably wrong.

Heat Pump And Air Conditioning Grading Systems And Methods, Fadi Mohammad Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

An expectation module determines an expected average power consumption of a heat pump for a predetermined period as a function of indoor and outdoor temperatures of the building during the predetermined period. A difference module determines a power difference between an average power consumption of the heat pump during the predeter mined period and the expected average power consumption of the heat pump for the predetermined period. A grade determination module determines a grade of the heat pump for the predetermined period based on the power difference of the predetermined period. A reporting module generates a displayable report including the …

Building Envelope And Interior Grading Systems And Methods, Fadi Mohammad Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

A difference module determines differences between an outdoor ambient temperature and an indoor temperature, determines a first average of the differences , and determines a second average of the differences. A storing module stores a first data point, the first data point including the first average and a first total run time of a heating, ventilation, and/or air conditioning (HVAC) system, and stores a second data point, the second data point including the second average and a second total run time of the HVAC system. A fitting module fits a line to the first and second data points. An envelope …