Construction Engineering Commons^™

Building And Growing With Mobile Technology, Chris Lierheimer

The Professional Constructor

Today’s construction managers have an arsenal of mobile technologies at their disposal, all of which make managing projects vastly more organized and efficient than ever before. In this paper, I will explore in detail three different mobile technologies that the modern contractor has at his or her disposal, their benefits, potential pitfalls that they may present, and my thoughts on the future of these tools. I will share personal experience with, and research based on topics ranging from building information modeling, to RFID chip tracking of resources, to cloud based programs that streamline information flow.

Using Mobile Technology For Managing Construction Projects, Paul Shaw

The Professional Constructor

This essay examines the use and application of emerging mobile technologies in the construction industry. Mobile phones and tablets are discussed in-depth, and can be used to replace office tools, to collaborate, and to bring building information modeling (BIM) technology out into the field. Next, wearable computing technology is discussed, including Google Glass and smart hard hats. This technology provides another avenue for construction information access in the field. Finally, unmanned aerial vehicles are discussed, along with their challenges and potential benefits. Increased technology use will absolutely improve efficiency and profitability in the construction industry.

Solar Orientation For Low-Energy Residential Building In Pagosa Springs, Colorado, Torry D. Hessman, Caroline M. Clevenger, Maryellen C. Nobe, Katharin Leigh

The Professional Constructor

This research compares the energy performance of 43 homes. Seven homes, constructed by a single builder using passive design principles, are the focus of the study. The remaining 36 homes, more conventionally built, establish a baseline for local residential energy performance. All of the homes are located within a six square-mile geographical region in Pagosa Springs, Colorado. Researchers collected utility data over a two year period, from September 2009 to August 2011. While other factors impact performance, for this study the dependent variable was energy consumption in British Thermal Units (BTUs) per square foot per season. The independent variable was …

Adoption Of Green Building Guidelines In Usa, India, And China, Matt Syal, Yunhui Yang, Gayatri Kumar, Jawanda Jackson

The Professional Constructor

Green Building Guidelines (GBGs) have played a major role in the global efforts to develop environmentally responsible buildings and infrastructure. These guidelines serve as ratings tools to evaluate sustainable practices used in buildings’ design, construction, and operations. Although, the acceptance of these guidelines has begun to increase globally, only a few countries have seen their widespread adoption. The acceptance of GBGs is dependent upon various factors specific to the country and society in which they exist. USA, India, and China were selected to be the focus of this study since each of these countries present a unique set of societal …

Characterizing Equipment Cost, Fuel Use, And Emissions For Earthwork Activities, Phil Lewis, Yongwei Shan, Apif Hajji, Elizabeth Hazzard

The Professional Constructor

The objective of this paper is to examine the relationships between construction equipment costs, fuel use, and air pollutant emissions to make more informed decisions in construction planning and achieve more sustainable construction activity. This paper presents an estimating approach that combines both construction and environmental data to assess the relationships between equipment costs, fuel use, and emissions. To characterize these relationships, a case study is presented for a dozer performing a bulk excavation activity. Sensitivity analyses based on soil type, dozing distance, and engine horsepower rating are presented. Results indicate that there is little difference in the equipment total …

General Interest Articles, American Institute Of Constructors

The Professional Constructor

No abstract provided.

Assessing The Economic, Energy, And Environmental Impacts Of A Bridge Replacement Project, Elizabeth Hazzard, Phil Lewis

The Professional Constructor

As the nation moves toward more sustainable energy and environmental standards, it is important to examine all sources of fuel consumption and pollution, including heavy-duty diesel (HDD) construction equipment. In order to quantify these sources at the project level, they must be identified with their respective activities. A case study was performed on an Oklahoma Department of Transportation (ODOT) bridge replacement project in order to establish a baseline estimate of real-world equipment activity, fuel use, and emissions data. These data were collected on a daily basis via jobsite visits and included specific information such as the equipment’s model year, engine …

In Memory Of Fran Dugan, American Institute Of Constructors

The Professional Constructor

No abstract provided.

Analysis Of Green Building Initiatives On U.S. University Campuse, Dennis C. Bausman, Ben Mueller

The Professional Constructor

As population expands and resource consumption grows, interest in sustainable practices continues to intensify. Universities and colleges in the U.S. have been leading the trend toward building certification and green initiatives to reduce energy consumption, lower water consumption, and recycle solid waste. This study investigates the extent to which green practices are implemented on new construction and the renovation of existing building stock on university campuses across the United States. The study also examines the financial analysis techniques institutions use to assess and prioritize green initiatives on new and existing facilities. The population selected for this study was two hundred …

Full Issue, Volume 39, Number 1

The Professional Constructor

No abstract provided.

Ua66 Ogden College Of Science & Engineering Newsletter, Cheryl Stevens, Dean

Ogden College of Science & Engineering Publications

No abstract provided.

Ua1c11/73 C. Haskel Mccauley Photo Collection, Wku Archives

WKU Archives Collection Inventories

Photographs by C. Haskel McCauley

Ua3/1/5/3 President's Office-Cherry Campus Building Campaign, Wku Archives

WKU Archives Collection Inventories

Records created by the President's Office during the Henry Cherry administration regarding the construction of WKU. This series is not completely processed.

Wildlands Conservancy Addendum, Susie Van Kirk

Susie Van Kirk Papers

Shaw Property: W Half SE qt, SE qt SE qt sec 6; NE qt NE qt sec 7, 2N2W. Barn located across Centerville Road (north side) from house. Looks like both are in sec 7. Report includes site visit, deed information, tax assessments, references, and photos.

Air Change Rate Vs Airflow Pathway: Bioaerosol Containment And Removal In Patient Rooms, Kevin R. Grosskopf

Durham School of Architectural Engineering and Construction: Faculty Publications

Recent studies have shown that higher air change rates may have the unintended consequence of creating turbulent airflows that entrain high concentrations of infectious particles within the breathing zone, and possibly, breakdown pressure relationships necessary to contain the spread of infectious particles to other clinical spaces.

Bs News January/February

Building Services Engineering

No abstract provided.

Ventilation Rates And Airflow Pathways In Patient Rooms: A Case Study Of Bioaerosol Containment And Removal, Ehsan S. Mousavi, Kevin R. Grosskopf

Durham School of Architectural Engineering and Construction: Faculty Publications

Most studies on the transmission of infectious airborne disease have focused on patient room air changes per hour (ACH) and how ACH provides pathogen dilution and removal. The logical but mostly unproven premise is that greater air change rates reduce the concentration of infectious particles and thus, the probability of airborne disease transmission. Recently, a growing body of research suggests pathways between pathogenic source (patient) and control (exhaust) may be the dominant environmental factor. While increases in airborne disease transmission have been associated with ventilation rates below 2 ACH, comparatively less data are available to quantify the benefits of higher …

Adaptive Predictive Functional Controller, Fadi Alsaleem, Arvind Rao

Durham School of Architectural Engineering and Construction: Faculty Publications

A controller device and a method for controlling a system that utilizes an adaptive mechanism to self-learn the system char acteristics and incorporates this adaptive self-learning ability to predict a control parameter correctly to provide precise control of a system component.

An Adaptive Photovoltaic Topology To Overcome Shading Effect In Pv Systems, Mohamed Amer Chaaban, Lana El Chaar, Mahmoud Alahmad

Durham School of Architectural Engineering and Construction: Faculty Publications

Shading in photovoltaic systems can cause many undesired effects.When shading occurs, the power generated from the PV system is much less than nominal power, increasing the electrical mismatching losses between PV system components. Active research to address this power loss focuses on static and adaptive systems.This paper addresses an adaptive system solution and proposes a new method to adaptively overcome losses due to shading during low radiation conditions. In addition, a statistical analysis for choosing the most feasible and efficient configuration for the system size is presented. The proposed system has been validated under shade conditions in a simulation and …

Building Envelope And Interior Grading Systems And Methods, Fadi Mohammad Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

A difference module determines differences between an out door ambient temperature and an indoor temperature, deter mines a first average of the differences, and determines a second average of the differences. A storing module stores a first data point, the first data point including the first average and a first total run time of a heating, ventilation, and/or air conditioning (HVAC) system, and stores a second data point, the second data point including the second average and a second total run time of the HVAC system. A fitting module fits a line to the first and second data points. An …

Speed And Resolution In The Age Of Technological Reproducibility, Shawn Taylor

Theses and Dissertations

The rate of acceleration of the biologic and synthetic world has for a while now, been in the process of exponentially speeding up, maxing out servers and landfills, merging with each other, destroying each other. The last prehistoric relics on Earth are absorbing the same oxygen, carbon dioxide and electronic waves in our biosphere as us. A degraded .jpeg enlarged to full screen on a Samsung 4K UHD HU8550 Series Smart TV - 85” Class (84.5” diag.). Within this composite ecology, the ancient limestone of the grand canyon competes with the iMax movie of itself, the production of Mac pros, …

Ua11/3 Public Affairs Building & Construction File, Wku Archives

WKU Archives Collection Inventories

Records regarding campus buildings and construction projects used for writing press releases. Includes construction information sheets, press releases and clippings from newspapers around the state.

Ua3/8/1 President's Office-Meredith Correspondence / Subject File, Wku Archives

WKU Archives Collection Inventories

Correspondence and subject files created by the President's Office during Thomas Meredith's tenure as president of WKU.

A Review Of Approaches For Sensing, Understanding, And Improving Occupancy-Related Energy-Use Behaviors In Commercial Buildings, Hamed Nabizadeh Rafsanjani, Changbum R. Ahn, Mahmoud Alahmad

Durham School of Architectural Engineering and Construction: Faculty Publications

Buildings currently account for 30–40 percent of total global energy consumption. In particular, commercial buildings are responsible for about 12 percent of global energy use and 21 percent of the United States’ energy use, and the energy demand of this sector continues to grow faster than other sectors. This increasing rate therefore raises a critical concern about improving the energy performance of commercial buildings. Recently, researchers have investigated ways in which understanding and improving occupants’ energy-consuming behaviors could function as a cost-effective approach to decreasing commercial buildings’ energy demands. The objective of this paper is to present a detailed, up-to-date …

Use Of Fiber-Reinforced Cements In Masonry Construction And Structural Rehabilitation, Ece Erdogmus

Durham School of Architectural Engineering and Construction: Faculty Publications

The use of fiber reinforcement in traditional concrete mixes has been extensively studied and has been slowly finding its regular use in practice. In contrast, opportunities for the use of fibers in masonry applications and structural rehabilitation projects (masonry and concrete structures) have not been as deeply investigated, where the base matrix may be a weaker cementitious mixture. This paper will summarize the findings of the author’s research over the past 10 years in these particular applications of fiber reinforced cements (FRC). For masonry, considering both mortar and mortar-unit bond characteristics, a 0.5% volume fraction of micro fibers in type …

Failure Modes For I-Section Gfrp Beams, Mamadou Konate, Zia Razzaq

Civil & Environmental Engineering Faculty Publications

This paper presents calculations for the failure modes for I-section Glass Fiber Reinforced Polymer (GFRP) beams with single mid-span web brace. Theoretical predictions are made using ASCE-LFRD Pre-Standard for FRP structures. For the member length considered, it is found that for small and medium I-sections the failure mode is governed by lateral-torsional buckling and for bigger I-sections the failure mode is governed by material rupture. The outcome of the predicted lateral-torsional buckling mode is compared with that observed experimentally.

Higher Hourly Cost Compensation For Heavy Equipment Used In Demolition Activity, Mark Shaurette

Bowen School of Construction Faculty Publications

Demolition activity is increasingly dependent on heavy equipment as the primary means of dismantlement. This mechanized wrecking process qualifies as a severe working condition for the heavy equipment employed. Demolition practitioners note that the severe conditions encountered increase the operating cost of the equipment employed. There are occasions when unexpected project conditions or disaster response necessitate negotiated compensation for demolition services. In these negotiations, hourly cost references are utilized by contracting agencies to benchmark hourly billings. Supervising engineers recommend using the hourly values quoted in national cost references for standard construction services because no specific guidance for cost adjustment is …

Campus Planners' Preferences For Residence Hall Project Delivery Methods, Paul E. Riel

UNF Graduate Theses and Dissertations

This research determined the preferred project delivery method utilized by campus planners when building student housing on a university campus. Four key performance indicators were also evaluated to determine if they influenced the campus planner to select a particular project delivery method. The four key performance indicators were: owner input, cost, safety, and on-time completion. Campus planners identified though the Society for Campus and University Planners (SCUP), were invited to participate in this survey research method. Five research questions were explored in this study. They were:

1. What is the preferred project delivery method (PDM) when building a residence hall …