Construction Engineering Commons^™

The Professional Constructor, Full Issue, Volume 47, Number 01

The Professional Constructor

No abstract provided.

Design, Development, And Characterization Of Highly Efficient Colored Photovoltaic Module For Sustainable Buildings Applications, Mohammad Khairul Basher, Mohammad Nur-E-Alam, Momtazur Rahman, Steven Hinckley, Kamal Alameh

Research outputs 2022 to 2026

The building integrated photovoltaic (BIPV) system is one of the contributors which has enormous potential to reach the goal of net-zero energy buildings (NZEB) that significantly reduce the use of fossil fuels that contribute to global warming. However, the limitations of the visual and aesthetic appearance of current BIPV systems make this aspiration unlikely. This study investigates the limitations of the single-color-based PV modules that are dull in appearance and have low photo-conversion efficiency (PCE). In order to solve this issue, we designed, developed, and characterized micro-patterned-based multicolored photovoltaic (MPCPV) modules which are applicable to net-zero building and development. Our …

Development Of The Human Scale Twelve-Node Model, Tebrez W. Khan

Architectural Engineering

The attempted creation of a full-scale twelve-node model made of PVC pipe and golf balls. Intended use of the structure was for students to tactically learn from the model.

Proposal For Adobe Earthbag Disaster-Relief Structure, John Camacho

Construction Management

The science behind creating an adobe house has been around for thousands of years; the primitive mixture contains only dirt, water, and straw. Left to cure in bricks or as a single cast-in-place system, the structure will provide long-lasting protection from the elements. Science has taken this a step further with the introduction of cementitious admixtures and reinforcement. The result is an adobe structure with exemplary thermo-retentive properties and load-bearing capabilities. This project provides an analysis on the “SuperAdobe” earthbag system that has been put into practice by independent contractors and housing-relief initiatives. The goal of the project was to …

Using Flight Simulation As A Convenient Method For Uas Flight Assessment For Contractors, Colin Dees, Joseph M. Burgett

The Professional Constructor

Operating an unmanned aircraft system (UAS) for commercial purposes in the United States requires the pilot to pass the Federal Aviation Administration’s (FAA’s) knowledge exam to earn their UAS license. The exam does not include a practical component where flight proficiency is assessed. This represents a source of risk for contractors if flight proficiency is not evaluated in another way. The National Institute of Standards and Technology is a federal agency and has developed the Basic Maneuvering Test (BMT). It is the only nationally recognized UAS flight proficiency exam. While not required, the construction industry can benefit by using this …

Impact Of Covid-19 On Sense Of Community / Student Engagement, Aaron Sauer, Richard Gebken, Richard Bruce

The Professional Constructor

The spring of 2020 was a time of unprecedented change for higher education institutions. The COVID-19 pandemic forced schools to re-think instructional delivery and the undergraduate experience as they implemented measures to protect students, faculty, and staff. Unraveling the impact of the pandemic on higher education will take many years. This study investigated how the institutional response in the return to campus following the pandemic influenced sense of community, a component of student engagement. A previously developed instrument was delivered at two construction management programs in the U.S. Midwest before and after the pandemic. The two schools were similar in …

Current State Of The Workforce Demographics And Knowledge Transfer Strategies In The Southeast United States, Vivek Sharma, Dhaval Gajjar, Kapil Madathil, David Davis, Shreyas Patel

The Professional Constructor

The construction industry is a very diverse industry due to the unique nature of projects and expertise within various construction companies driven by multiple regional/national factors. The United States Department of Labor reported 44% of the current US employed population will be above 65 in eleven years by 2028, making workforce studies and knowledge transfer a key driver in leading construction business models. This study conducted an in-depth investigation in the southeast region of the US on the current state of workforce demographics and the need for knowledge transfer within the ranks of management coupled with trade personnel. The study …

Perceptions Of Remote Work Within The Construction Industry Resulting From The Covid-19 Pandemic In The South Central United States, Sara B. Overturf, Ben Bigelow, Matthew Reyes

The Professional Constructor

Working remotely became increasingly popular over the previous two years, given organization’s need to rapidly adjust to changing conditions as a result of the Coronavirus. It allowed companies to more easily adapt to stay-at home orders and create a safer environment for their employees. While working remotely can have a positive impact on employees, there are also challenges to overcome for both employees and organizations. This study focused on understanding both the prevalence and implementation of remote work within the commercial Construction industry to face the professional challenges resulting from the Coronavirus. This paper provides insight into companies that have …

Educating The Construction Client: Training Strategy For Buyers Of Commercial Design And Construction Services, Michael J. Emmer

The Professional Constructor

Business owners can face a myriad of challenges when venturing into a new construction project. Most of the design and construction process is unfamiliar territory as compared to their customary business operations and owners face a wide assortment of issues when making the decision to build a new facility. Consequently, the majority of owners are entirely out of their business element when deciding to enter into the undertaking of a new building project. Since most of the risk with any given project rests with the Owner, better training and strategies for owners will lead to a higher likelihood of project …

Ahp Based Multi Criteria Decision Analysis Of Success Factors To Enhance Decision Making In Infrastructure Construction Projects, Solomon Belay, James D. Goedert, Asregedew Woldesenbet, Saeed Rokooei

Durham School of Architectural Engineering and Construction: Faculty Publications

The study presents analytical data-based multi-criteria approach of critical success factors of infrastructure construction projects analyzed in the Ethiopian construction industry. This multi-criteria technique helps to improve the decision capabilities and ultimate performance of construction processes in various low-income countries of the East African region. The aim of this paper is to establish a logical relationship and interdependencies of success-related factors for enhancing decision making for various project teams and identify priorities while taking into account all known construction organizational constraints. A structured hierarchical matrix was developed based on a pre-identified success-related factors, and initially evaluated by experienced professionals as …

Law School News: National Housing Advocate Named To Lead Rwu's New Real Estate Initiatives 02/08/2022, Roger Williams University School Of Law

Life of the Law School (1993- )

No abstract provided.

Strategic Energy Master Planning For Carbon Neutrality, Marie Patterson

CSU Journal of Sustainability and Climate Change

Universities across the United States are generating goals to be more sustainable and carbon neutral. The energy used in existing buildings on campuses amount to a large volume of greenhouse emissions and must be reduced to help achieve neutrality goals. Strategic Energy Master Plans are instrumental to support these goals through the development of recommendations to reduce energy. Calculating the energy use intensity for existing buildings, a main component of a Strategic Energy Master Plan, can help the campus understand where energy is being used the most. With this information the highest energy consuming buildings can be the focus of …

Availability Heuristic In Construction Workforce Decision-Making Amid Covid-19 Pandemic: Empirical Evidence And Mitigation Strategy, Yunping Liang, Anil Baral, Mohsen Shahandashti, Baabak Ashuri

Durham School of Architectural Engineering and Construction: Faculty Publications

The decision-making situations of the construction workforce have been drastically altered since the outbreak of the Coronavirus 2019 (COVID-19) pandemic. The new situation, where decision-makers strive to promptly respond to the unprecedented crisis to sustain essential construction operations without compromising the safety and health of workers, implies the presence of an availability heuristic. An availability heuristic has the potential to bring unconscious, systematic errors to the decision-making process. This study creates a decision-making experiment to empirically examine the presence of an availability heuristic and the effectiveness of a corresponding mitigation strategy in construction workforce decision-making under COVID-19 uncertainties. The experiment …

A Systematic Literature Review Exploring The Barriers To Innovative Modular Construction Methods For The International Hyper-Scale Data Centre Sector, Peter E. Lonergan, A.Omar Portillo-Dominguez

Other

Data centres form the essential global infrastructure relied upon for multiple industries such as the internet, financial services, and telecommunications. Consequently, data centre construction has developed into a buoyant business sector, leveraging increasing global investment. However, traditional means of data centre procurement do not match stakeholder’s ambitions or current delivery demands. Thus, there is a need for the adoption of new and innovative construction methodologies in the sector to introduce improvements for the delivery of this essential infrastructure. As a step in that direction, this paper presents a Systematic Literature Review (SLR) that investigates the barriers preventing the implementation of …

Impact Of Covid-19 On The Diversity Of The Construction Workforce, Anil Baral, Yunping Liang, Mingshu Li, Marilyn Gonzalez, Mohsen Shahandashti, Baabak Ashuri

Durham School of Architectural Engineering and Construction: Faculty Publications

Construction industry employment has been severely impacted by the coronavirus (COVID-19) pandemic. This paper examines the impact of the COVID-19 pandemic in the US construction labor market. This study contributes to the state of knowledge by (1) revealing how the COVID-19 pandemic impacted construction employment across different demographic groups and geographic regions in the US, and (2) identifying vulnerable demographic groups (e.g., minorities, women, older workers) in the construction workforce that are disproportionally impacted by the pandemic. Employment data from the Current Population Survey and Current Employment Statistics (CES) programs, which are administered by the Bureau of Labor Statistics, are …

Tilt-Up Partially Composite Insulated Wall Panels, Marc Maguire, Salam Al-Rubaye

Durham School of Architectural Engineering and Construction: Faculty Publications

This research project was initiated to investigate the behavior of load-bearing concrete insulated wall panels for use in tilt-up construction. The primary objective was to understand the inelastic behavior of these panels so that engineers could perform a proper second-order analysis for combined axial and out-of-plane loading. Toward this aim, the Tilt-up Concrete Institute (TCA) and wythe connector suppliers Innstruct, Thermomass, HK Composites, Dayton Superior, and IconX, funded this study.

This report contains information related to testing of solid and partially composite insulated wall panels that integrated proprietary wythe connection systems. Using the information from these tests, a method to …

Challenges And Enabling Features Of Small And Medium Infrastructure Public-Private Partnerships (P3s): A Case Study Of The Us P3 Infrastructure Market, Yunping Liang, Baabak Ashuri

Durham School of Architectural Engineering and Construction: Faculty Publications

Purpose: In classical perspective, projects under a certain size are not feasible for P3. However, there is an emerging trend on using P3 to deliver projects that are frequently small to medium sized to meet ever-increasingly complex social needs, including enhancing lifecycle performance of existing facilities, designing and building for resilience and sustainability, ensuring cost effectiveness of public spending, and fostering innovation. In contrast with the increasing implementation, small and medium P3s, especially those in the United States, receive little attention in existing studies. This study aims at answering the question: in the context of the US, what features of …

Affordable And Sustainable Housing, Brandon Gibson

Williams Honors College, Honors Research Projects

Due to the current state of the world, families around the world have started to invest in their homes. This change in lifestyle has caused the average cost to build a new home to increase to nearly $300,000, with an additional $35,872 due to the pandemic-related uptick in material costs. Custom homes take an ample amount of planning, construction time, along with excessive amounts of materials. I am looking to put my spin on a recent trend that allows an efficient construction timeline, along with the reduction of materials and waste.

Shipping Containers. Though their history of utilization has solely …

Building Services Engineering January/February 2022

Building Services Engineering

No abstract provided.

Exploring The Effects Of Chip Flexibility On The Behavior Of Standing Seam Diaphragms To Brace Cold Formed Steel Purlins, Michael W. Seek

Engineering Technology Faculty Publications

Cold-formed steel C- and Z-shaped purlins in standing seam roof systems rely on the diaphragm action provided by the panels to restrain lateral movements and thus increase the load carrying capacity the purlins. The clip connection between the purlin and the panel has inherent and sometimes intentional flexibility designed to accommodate thermal deformations. The lateral deformation behavior of standing seam systems supported by Zees is highly nonlinear and this behavior is not well understood. The flexibility has major implications on the transfer of diaphragm forces throughout these systems and simplified models often grossly overpredict the demands on the diaphragm and …

Transdisciplinarity In Experience Design: A Global Survey Of Higher Ed Programs In Exd/Xd, Yvonne Houy

Creative Collaborations

In our age of ubiquitous devices and digital media it is the perceived value of the end-to-end experience that brings people to a place. Designing inspiring and emotionally engaging end-to-end experiences requires experts in a wide range of disciplines committed to an interdisciplinary collaboration that can arrive at transdisciplinary design - the sum becomes greater than its parts.

Civil engineering, hospitality, business, psychology, digital User Experience (UX) design, and experience data analysis need to be seamless integrated with the fine and performing arts and design fields:

• Architecture, interior, landscape and sound design actively engage the senses.

• Graphic and fine arts …

  ---

  Go to article

Framework For Enhanced Applicability Of The Egyptian Public Procurement Law To International Administrative Construction Contracts, Amr Abu Helw

Theses and Dissertations

Local governments and public authorities conclude contracts for the purpose of acquisition of goods, delivery of services and construction of public facilities like bridges, infrastructures and public buildings. A public contract is an agreement to perform particular tasks financed by government funds to the benefit of the whole community. Private entities and corporations are subject to stricter standards in their dealings with the government than in private transactions. Conversely, the government must deal fairly and equitably with those who it contracted with to achieve successful implementation of the projects. On October 3, 2018, a new Egyptian public procurement law, namely, …

Higher Sound Levels In K-12 Classrooms Correlate To Lower Math Achievement Scores, Laura Caroline Brill, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

Sound levels from occupied classrooms have been gathered from 220 classrooms across four grade levels (3, 5, 8 and 11) over six school days each and processed with k-means clustering into speech and non-speech clusters. Three metrics describing the classroom acoustics, including the average daily A-weighted equivalent level for non-speech, the average daily difference between the A-weighted equivalent levels for speech and nonspeech (a signal to noise ratio), and the mid-frequency averaged reverberation time, were analyzed against classroom-aggregated standardized reading and math achievement test scores, while controlling for classroom demographics including socioeconomic status. Interactions between the metrics and demographics were …

Building Services Engineering November/December 2021

Building Services Engineering

No abstract provided.

The Effects Of The Visual Environment On K-12 Student Achievement, Michael Kuhlenengel, Iason Konstantzos, Clarence E. Waters

Durham School of Architectural Engineering and Construction: Faculty Publications

The varying indoor environments among educational buildings can have an impact on students’ ability to learn. This study looks at field data from 220 classrooms in the Midwest, United States, over a two-year period, to analyze the effects of the visual environment on student achievement. The visual environmental metrics considered within this scope include the three new view metrics introduced within the EN 17037 “Daylight of Buildings” standard (Horizontal Sight Angle, Outside Distance of View, and Number of View Layers), as well as standard daylight and electric lighting metrics, focusing on light availability and glare. To capture student achievement, math …

The Professional Constructor, Full Issue, Volume 46, Number 02

The Professional Constructor

No abstract provided.

3d Printed Concrete & Polymer Concrete For Infrastructure Applications, Daniel Heras Murcia

Civil Engineering ETDs

Additive manufacturing technology has been established as one of the fastest-growing building technologies worldwide. Three-dimensional concrete printing (3DCP) has developed an increasing interest in the last decade due to its prospects as a transformative technology for industries such as the concrete precast. Besides the improvements in automation technologies in construction, traditional construction has faced considerable challenges: high accident rates, labor dependency, significant potential for automation, and high costs associated with the use of traditional formwork. In this context, three-dimensional concrete, also referred to as physical prototyping, is a novel construction technique in which the concrete is extruded layer-to-layer. 3DCP is …

Simulation For A Mems-Based Ctrnn Ultra-Low Power Implementation Of Human Activity Recognition, Muhammad Emad-Ud-Din, Mohammad H. Hasan, Roozbeh Jafari, Siavash Pourkamali, Fadi M. Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper presents an energy-efficient classification framework that performs human activity recognition (HAR). Typically, HAR classification tasks require a computational platform that includes a processor and memory along with sensors and their interfaces, all of which consume significant power. The presented framework employs microelectromechanical systems (MEMS) based Continuous Time Recurrent Neural Network (CTRNN) to performHAR tasks very efficiently. In a real physical implementation, we show that the MEMS-CTRNN nodes can perform computing while consuming power on a nano-watts scale compared to the micro-watts state-of-the-art hardware. We also confirm that this huge power reduction doesn’t come at the expense of reduced …

A Proposal To Harmonize Bim And Iot Data Silos Using Blockchain Application, Zulkefly Abu Bakar, Malachy Mathews Dr

Conference papers

The integration of Building Information Modelling (BIM) and Internet of Things (IoT) provide significant end-to-end benefits for the architecture, engineering, construction, and operations (AECO) industry. Example applications include on-site assembly services, data localization for built environment, occupancy performance measures and many other analyses that can be used to improve the built environment. However, silos in the BIM and IoT data exchange have impacted the digital process adoption in AECO industry, which aims to change the dynamics and behaviors of the current working process. Penzes, (2018) in his report, acknowledges the AECO industry as one of the most fragmented sectors with …

Framework To Develop Time- And Voltage-Dependent Building Load Profiles Using Polynomial Load Models, Andrew Parker, Mhd Anas Alkrch, Kevin James, Ahmad Almaghrebi, Mahmoud Alahmad

Durham School of Architectural Engineering and Construction: Faculty Publications

The power consumption of buildings over the course of each minute, hour, day and season plays a major role in how this load influences the Electric Power System voltage and frequency, and vice versa. This consumption is based on the building's load component types, efficiencies, and how they consume power and react to changes in real time. Due to this complexity, standard full-building load models are typically voltage-invariant. This paper proposes a novel framework to transform these voltage-invariant building load models into fully time- and voltage-dependent load profiles using available data on the voltage sensitivity of individual load components. While …