Architectural Technology Commons^™

Green Building Rating System (Gbrs) As A Tool To Improve Sustainability Performance Of Buildings In The Built Environment Of Nigeria, Akeem Bolaji Wahab, Adefunke Taiwo Jegede

Journal of Environmental Science and Sustainable Development

In the worldwide, the impacts associated with the use of technological innovations and developmental processes in the built environment through the construction of buildings are phenomenal. This is noticeable in the literature on the role of green building practices in building construction, building operation and optimization, and building management; respectively. This has led stakeholders and policy drivers to adopt principles of sustainability by producing green building rating systems to assess building stock at different stages of their life cycle. Dealing with the issue, this paper aimed to review various attempts made by selected nations and other stakeholders to produce green …

Hurricanes And Housing: Highlighting The Ongoing Impact Of Hurricane Michael And The Post-Disaster Housing Problem, Mary Beth Barr

Architecture Undergraduate Honors Theses

Hurricanes impact individuals and communities on many levels - emotional, physical, mental, financial - to name a few. Every time a hurricane occurs, lives are drastically altered forever. One of the ways that hurricanes impact individuals and communities most powerfully is through the effect that they have on housing. Unleashing uncontrollable damage to infrastructure and the built environment, hurricanes exacerbate housing problems that exist and create new ones where they did not exist before. Hurricane Michael, which catastrophically impacted the Florida Panhandle in 2018, is a case study in which the impact that hurricanes have on housing is prevalent.

By …

Construction Of An Apartment Building And Parking Garage, Kirsten Wilson, Kirsten R. Wilson

Honors College Theses

Construction projects are known far and wide to all people. Buildings we need for daily survival would not exist if it were not for the construction industry. Our homes, healthcare facilities, groceries, and other necessary amenities would be gone if it were not for the structures they are housed in. This project aims to simulate the lifespan of a construction job from the design phase to the preconstruction phase and stops at the final presentation before an agreement to start construction.

To create the simulation for the students, a fake RFP, or request for proposal, was created and given to …

Tracking The Change In The Number Of Residential Buildings Using Remote Sensing Techniques: A Case Study For An Area In The North Of Riyadh, Abdulaziz Aldegheishem, Nayef Alharbi

Emirates Journal for Engineering Research

This study aims to determine the urban expansion in a specific area in the north of the city of Riyadh using Remote Sensing techniques and Geographic Information Systems based on visuals and satellite images. The study seeks to determine the size of the increase in housing units in a selected area in the north of Riyadh during the period from 2007 to 2019 by studying the change in the number of residential buildings and comparing the changes that occurred during this period based on data extracted from high-resolution satellite images. Many programs have been used in correcting and balancing satellite …

Reflections Of Arabic Literature On Architectural Representation, Othman El Obeidi, Aya Salamah, Rola Ayoub, Abed El Karim Owaydat

Architecture and Planning Journal (APJ)

Literature and architecture have long been connected where both are forms of art; literature is a verbal form of art whereas architecture takes a social form. Both domains play a major role in heritage inheritance and representation and are immensely linked to each other; each is capable of representing and embodying the other. Gloomily, in light of digital technology, Information Age, and onslaught of globalization, the reflections of the practices of Arabic literature on architectural representations, after being practiced together since ancient periods, have retracted in recent times thus architecture in the Arab cities has started to veer far away …

Twisted Buildings: Concepts And Approaches, Amani Marmar, Sally Zouia, Sahar Ismail, Ahmad Hallik

Architecture and Planning Journal (APJ)

With the emerging of new technologies, the look for more sustainable towers appears. Through designing twisted towers, an aerodynamic and energy efficient structure can be made to reduce materials and wind loads towards it. By definition, a twisted building is one that has gradually rotating floor plates along its height. The problem here rises due to the risk of structural failure and lack of load transfer and unorganized interior function. Thus, this research aims to detect the design solutions used to execute the twisted buildings achieving stability, safety, and withstanding climatic effects. In order to accomplish the mentioned aim, the …

New Considerations In Designing The Circulation Elements To Reduce Covid 19 Infection, Sara Chamass, Selim Kilani, Anas Mattar

Architecture and Planning Journal (APJ)

As a result of the global pandemic recession of COVID-19, cities have imposed several restrictions to control this outbreak by closing their frontiers and forcing social distancing. The conjecture has arisen as to how architecture could be entirely influenced. This field is involved in finding solutions to reduce the spread of this pandemic which became a new issue. Unfortunately, due to the shortage of the movable and flexible circulation elements, the considerations and architectural preventive measures taken were affected during the planning of the post-pandemic built-environment. This paper, therefore, aims to propose a checklist of new design considerations for the …

3d Printed Concrete & Polymer Concrete For Infrastructure Applications, Daniel Heras Murcia

Civil Engineering ETDs

Additive manufacturing technology has been established as one of the fastest-growing building technologies worldwide. Three-dimensional concrete printing (3DCP) has developed an increasing interest in the last decade due to its prospects as a transformative technology for industries such as the concrete precast. Besides the improvements in automation technologies in construction, traditional construction has faced considerable challenges: high accident rates, labor dependency, significant potential for automation, and high costs associated with the use of traditional formwork. In this context, three-dimensional concrete, also referred to as physical prototyping, is a novel construction technique in which the concrete is extruded layer-to-layer. 3DCP is …

Arise (Certcoin)- Inspiring Demand For Sustainable Energy Skills, Barry Mcauley, Paul Mccormack, Andrew Hamilton, Eduardo Rebelo

Conference papers

The European AEC Sector now faces impending challenges over the next decade concerning escalating climate targets. To reach these targets, it vital that the green economy deliver a better-skilled workforce and develops new competencies and methods of working. Training in the domain of digital construction technologies and processes, such as Building Information Modelling (BIM), are now seen as essential upskilling vehicles that must be embraced if the sector is to transition towards a greener agenda. To assist in meeting these training needs a selection of partners from the BIM EPA will partake in the Horizon 2020 ARISE project, aiming to …

A Proposal To Harmonize Bim And Iot Data Silos Using Blockchain Application, Zulkefly Abu Bakar, Malachy Mathews Dr

Conference papers

The integration of Building Information Modelling (BIM) and Internet of Things (IoT) provide significant end-to-end benefits for the architecture, engineering, construction, and operations (AECO) industry. Example applications include on-site assembly services, data localization for built environment, occupancy performance measures and many other analyses that can be used to improve the built environment. However, silos in the BIM and IoT data exchange have impacted the digital process adoption in AECO industry, which aims to change the dynamics and behaviors of the current working process. Penzes, (2018) in his report, acknowledges the AECO industry as one of the most fragmented sectors with …

Introduction To Prefabrication And Automation In Construction, Luciana Debs, Jiansong Zhang, Yunfeng Chen

Bowen School of Construction Open Educational Resources

New developments and recent advances in construction methods have the potential to change the future of the architecture, engineering and construction industry. Prefabrication, along with modular construction, provides a safe and controlled environment for the production of building construction elements and raises the need for improved collaboration and coordination from design to manufacturing and from transportation to final assembly. Prefabrication also provides relief from the skilled construction labor shortage while opening up new opportunities for mass customization within the building industry. Prefabrication and modular construction automation are emerging expansion routes for the construction industry. In addition, integral to developing the …

Digital Construction And Bim Research In Ireland 2016-2020, Barry Mcauley, Roger P. West, Alan V. Hore

Conference papers

As the construction industry opens up post pandemic, new and significant challenges will demand considerable expertise, not least in financial viability, solving the housing crisis and facing the very significant climate change pressures to make the industry less wasteful and less carbon intensive. This presents an excellent opportunity to further inculcate aspects of lean construction, particularly BIM into many aspects of construction not traditionally associated with digital construction, provided the necessary expertise is available and known to exist. Following a well-received recent conference paper summarising BIM-related research published by academics in Ireland’s higher education institutions in 2020, this paper will …

Web-Based Ives For User Experience Evaluation In The Architecture Studio, Faithful Oladeji

Frameless

Research on the use of immersive virtual environments (IVEs) in architectural design has rapidly permeated the practice for the last few decades, largely driven by a single prospect: the possibility of sufficiently simulating the genuine interactions and experiences of a design well before it is actually built. The implications of this achievement when fully realized would revolutionize the profession, effectively igniting a new period of David Harvey’s space-time compression in the industry, such that IVEs would enable designers to, symbolically, cross temporal distances, and bring a legitimate experience of their final products to the present, at any point in their …

Determination Of The Total Phenolic Content, Total Antioxidant Capacity And Radical Scavenging Activity Of Jordanian Royal Jelly And Honey Samples, Hamed Takruri, Ranim Alkhedr

Jerash for Research and Studies Journal مجلة جرش للبحوث والدراسات

Honey and royal jelly are two functional bee-hive products with antioxidant activity.This study aimed at investigating the total phenolic content, antioxidant capacity and radical scavenging activity of royal jelly, multiflora honey and citrus honey. Royal jelly, multiflora honey, and citrus honey samples were analyzed for the total phenolic content using Folin-Ciocalteau method, for total antioxidant capacity using FRAP assay. Also, DPPH assay was used for assessing radical scavenging activity. The results revealed that the total phenolic contents, the total antioxidant capacities, as well as DPPH scavenging activities of RJ were higher than those of Multifloral and citrus honey,. Furthermore, …

Modernization Of Scienttific Mathematics Formula In Technology, Iwasan D. Kejawa Ed.D, Prof. Iwasan D. Kejawa Ed.D

Department of Mathematics: Faculty Publications

Abstract
Is it true that we solve problem using techniques in form of formula? Mathematical formulas can be derived through thinking of a problem or situation. Research has shown that we can create formulas by applying theoretical, technical, and applied knowledge. The knowledge derives from brainstorming and actual experience can be represented by formulas. It is intended that this research article is geared by an audience of average knowledge level of solving mathematics and scientific intricacies. This work details an introductory level of simple, at times complex problems in a mathematical epidermis and computability and solvability in a Computer Science. …

Lessons From The Classroom – Assessing The Work Of Postgraduate Students To Support Better Hygrothermal Risk Assessment, Joseph Little, Beñat Arregi, Christian Bludau

Conference papers

The widespread adoption of transient simulation modelling tools by building design professionals to support hygrothermal risk assessment of building design specifications is a crucial component in a multi-pronged drive to reduce moisture risk in buildings. Structured upskilling is essential. Much can be learnt about the ways practitioners use such tools by reviewing the work of professional postgraduate student groups. Such review could inform the creation of a user protocol. Peer-review under the responsibility of the organizing committee of the ICMB21.

Take Heart School, Quentin John Porter

Architectural Engineering

Journeyman International, also known as JI, is a non-profit organization that groups together design and construction students with organizations looking to build humanitarian projects around the world. This pairing is beneficial for both the organization because they get free design and construction expertise, as well as for the students who get real-world experience. The Take Heart School is a planned school and grounds for the region of Migori Kenya. Take Heart Africa is a fair trade store with all profits going to help the impoverished communities of Kenya. The three-acre site will have a school with eight classrooms, offices, a …

Zoologijos Sodas, Arjun Elvis Urbonas, Dara Lin, Jesus Ramirez Zambrano, Samantha Ung, Robert Milkovich, Jakob Olsen, Azuolas Skucas

Architecture

50'x50' glass house in Palm Springs.

Design And Culture: A Transdisciplinary History, Maurice Barnwell

Purdue University Press Book Previews

Design and Culture: A Transdisciplinary History offers an inclusive overview that crosses disciplinary boundaries and helps define the next phase of global design practice. This book examines the interaction of design with advances in technology, developments in science, and changing cultural attitudes. It looks to the past to prepare for the future and is the first book to offer an innovative transdisciplinary design history that integrates multidisciplinary sources of knowledge into a mindful whole. It shows design as a process that expresses goals through values and beliefs, functioning as a major factor in contemporary cultural life.

Starting with the development …

The Causes Of Surface Condensation And Mould, And The Responsibility Of Relevant Parties To Alleviate Them, Joseph Little

Reports

All over Ireland large numbers of people live in unsanitary conditions suffering poor indoor air quality, surface condensation and mould. Where the occupants are tenants the cause of the conditions and identification of the parties responsible can cause much stress. Condensation and mould growth on the internal surface of a room are caused by a combination of factors due to specific conditions. In severe cases, one of these factors may lead to surface condensation and/or mould growth, but in general, surface condensation and/or mould growth occurs when two or three of these occur together. Even though multiple causes and shared …

Artist’S Tools: Reverse-Engineering Of Prototypes, Mi Tsung Chang

Open Educational Resources

Outputting the digital blueprint into a final fast prototype is important, but inputting a hand-made sculpture into the computer is as important in the creative process. There are many high-tech electronic devices that can help the artist generate form from his/her sculpture quickly. This process is called “reverse engineering of prototypes.” Touch Probes (Contact Method) The concept of the touch probe involves a measuring tip attached by several limbs with rotational joints. The design of the joints and limbs determines the reach of the touch probe. The measuring tip of the touch probe is used to measure the exact coordinates …

Digital Modeling: Theories And Techniques, Mi Tsung Chang

Publications and Research

In the process of architectural design, modeling is an important process in achieving design perfection. In the world of computers, it is very easy and productive to produce 3d model. As a matter of facts, modeling is the easiest way to produce rendering. Designers shouldn't limit themselves to their modeling skills, but should acquire enough sills to achieve whatever shapes and forms they can possible imagine. This is an article about methods and techniques to achieve the process of form makings.

The Effect Of Straw Bale On Thermal Performance Of Buildings In Hot And Arid Regions, Riyadh City As A Case Study, Waleed M. Abanomi

Emirates Journal for Engineering Research

A huge amount of energy is consumed by buildings in Saudi Arabia to cool indoor spaces particularly during summer season. In this regard, attention should be given to the environmental design strategies in the design of buildings during the early stages in order to minimize the cooling load inside buildings. This research considered using straw bale as one of the passive solar design methods that could protect buildings envelope from the harsh outdoor environment. This research assesses the effectiveness of using straw bale as an insulator by conducting field experiments. Two experimental chambers were built to achieve the experiments. The …

Computational Design Of Nonlinear Stress-Strain Of Isotropic Materials, Askhad M.Polatov, Akhmat M. Ikramov, Daniyarbek Razmukhamedov

Chemical Technology, Control and Management

The article deals with the problems of numerical modeling of nonlinear physical processes of the stress-strain state of structural elements. An elastoplastic medium of a homogeneous solid material is investigated. The results of computational experiments on the study of the process of physically nonlinear deformation of isotropic elements of three-dimensional structures with a system of one- and double-periodic spherical cavities under uniaxial compression are presented. The influence and mutual influence of stress concentrators in the form of spherical cavities, vertically located two cavities and a horizontally located system of two cavities on the deformation of the structure are investigated. Numerical …

Medkit: Modular Emergency Deployment, Christian Ladefoged, Zamila Karimi

Bachelor of Architecture Theses - 5th Year

This thesis began with exploring low-cost prefab dwelling units to be implemented in struggling communities with extreme poverty, homelessness, and unemployment. The initial research on modular units shifted to focus on our healthcare infrastructure challenges here at home given the COVID-19 crisis.

“Coronavirus disease 2019 (COVID-19) has had a substantial impact on racial and ethnic minority populations and essential workers in the United States …”¹ This disease disproportionately impacts poor and rural communities in the United States, showing double the mortality than urban areas simply due to the neglected environment². Emergency assistance is needed to expand the …

Encapsulating Sound, Jackie Soto

Bachelor of Architecture Theses - 5th Year

This thesis aims to identify the acoustic anomalies of Cannon Chapel by understanding how its visitants typically occupy the flexible space, the use of materials, and the shape of the spaces, and therefore to accurately resolve those acoustic anomalies, improving the auditory experience of those visitants and advancing architectural acoustic research.

Technological Augmentation: Creating A Public Center For Making, Timothy Hardeman

Bachelor of Architecture Theses - 5th Year

We live in an era where technology is driving forward at an unprecedented pace. We have access to tools, materials, and processes which weren’t even conceptualized 50 years ago. 3D printing, CNCs, and Laser Cutters allow us to create incredible designs, and at affordable prices. We have carbon fiber, advanced composites, and modern alloys.

But where do we experience these things? In a classroom? Through screens as we read about these intangible leaps in technology? Why don’t we have a place where we get to experience these things first-hand, and experiment with our own ideas about how they could be …

[Aero]Tecture: An Exploration Of The Relationship Between Natural Air And The High-Rise Office Typology, Matthew Williams

Bachelor of Architecture Theses - 5th Year

This thesis explores the relationship between natural air and high-rise office typology and questions “has air been neglected as an essential element of spatial design, and if so, what are the consequences of such neglect?” Pre-1900, office buildings relied on natural ventilation to function. With the advent of technology such as air conditioning in 1902, accompanied by innovations in standardized steel, artificial lighting, and hydraulic elevators at the turn of the century, office buildings got bigger, taller, and deeper for economic benefit. The resulting architecture of high-rise offices supplemented natural air with mechanical air. The thesis concludes that several complications …

Terra Dispositions: A Lithospheric Investigation Of Wet-Matter, Alec Rovensky

Architecture Senior Theses

Human intervention of the landscape by damming, filling wetlands and over-extracting is resulting in the rapid perversion of water bodies through the desertification or flooding of terrain and the ensuing contamination of reservoirs. In turn, these changes are disrupting ecosystems, reshaping geological borders, and causing irreversible damage that poses a threat to clean water supplies. As humans exert agency over local hydrology, there is scarce consideration of the ensuing ecological consequences. This thesis aims to expose the ecological transformations of territories laced with human agency by examining the residues left by water in order to deviate from the misplaced nostalgia …

Socializing Vacancy: An Architectural Thesis, Greg Winawer

Architecture Senior Theses

A large portion of office space has been left vacant, and thus provides no beneficial program to its remaining occupants or the local urbanity it is surrounded by. When considering what can be done with this vacant space, the primary motivation should be to integrate a program which does the opposite: a program which positively disrupts its existing context to hybridize and improve the current outdated programmatic arrangement. To insert a residential program into an existing office tower both disrupts and enhances the rigorous flows of our working and our domestic lives. The predefined universal concept of the ‘working-day’ is …