Architectural Technology Commons^™

What Is A Bim Design Model?, James Peters, Malachy Mathews

Conference papers

The recent report into Building Information Management or BIM, by construction law experts May Winfield and Sarah Rock entitled “Winfield Rock Report” [1] gives reason to state that the UK architectural, engineering and construction industry or AEC, is hindered by the absence of a clear definition of Level 2 BIM. The ISO 19650-2 standard published in 2019, is based upon PAS1192-2:2013. The intent of ISO 19650-2 is to provide a road map to facilitate the standardisation of BIM process in a uniformed fashion. A key pillar of ISO 19650 is the “information cycle” and central to this is a federated …

Solar And Rain Catching Canopy. Urban Oasis, Afolabi Ibitoye, Langston Clark, Elena Zimareva, Evan Banks, Alexander Aptekar

Publications and Research

The Urban Oasis is designed to work within existing “pocket parks” in New York City as a combined rainwater collector, personal electronics charging station and resting designation for New Yorkers. Intended to not only lessen the demand on the city power grid by using renewable energy to charge devices, the urban oasis is also intended to mitigate grey water overfill in New York’s combined sewer system and, in general, serve as a model for responsible environmental stewardship in urban areas.

The important technical aspects of the canopy specifically analyzed were:

a) how much rainwater could the canopy be expected to …

What Lessons Can Be Learned From The Delivery Of The First Building On The Grangegorman Campus Using Building Information Management (Bim)?, Pat O'Sullivan, Avril Behan

Conference papers

There is an acceptance that BIM, via data management, can be integrated with FM to reduce costs during the Operations and Maintenance stage of a project. However, what has not been documented is the ‘on the ground’ reality which can be reviewed as a lessons learnt exercise to improve the implementation of BIM FM for future projects. This case study sets out to explore the realities of a client’s adoption of BIM based upon the actual experience of the Greenway Hub. Rather than relying on anecdotal evidence the research was based upon the real practices and experiences of the Dublin …

Bicp Global Bim Study - Lessons For Ireland’S Bim Programme, Barry Mcauley, Alan Hore, Roger West

Reports

The Construction IT Alliance (CitA) has been promoting the benefits of digitisation in the construction and engineering industry in Ireland since its formation back in 2002. Whilst the Alliance has always strived to ensure that its members are exposed to a wide spectrum of contemporary digital tools and processes, the concept of Building Information Modelling (BIM) has dominated the focus of its activities over the past five years.

BIM can be described as a digital tool that facilitates everybody to better understand a building or structure through the use of a digital model which draws on a range of data …

Linking Geospatial Engineering Into Collaborative Multidisciplinary Bim Projects - An Educational Perspective, Avril Behan, Helen Murray, Jonathan Argue, Ronan Hogan, Audrey Martin, Pat O'Sullivan, Robert Moore, Malachy Mathews

Conference papers

This paper describes the background to and execution of a postgraduate project undertaken by students on DIT's MSc in Geospatial Engineering (GeoEng) in support of a project on level 2 BIM being undertaken by students on the MSc in applied Building Information Modelling & Management (aBIMM) around the retrofit of and new build extension to the Grangegorman Clock Tower Building. In support of this requirement, an external and internal survey of the existing structure and its surrounding topography was required. The aBIMM students and staff acted as the Design Team who subcontracted the Geo Eng group who were organised into …

A Comparative Life Cycle Assessment For Utilising Laminated Veneer Bamboo As A Primary Structural Material In High-Rise Residential Buildings, Philip Kavanagh

Masters

In a time when construction is ranked as one of the world’s least sustainable industries consuming about half of the world’s non-renewable resources (Hinson, 2012), it is important to develop and advance the methods and means by which we select and use building materials and how we design, engineer and construct our architecture. This research aimed to evaluate a method for utilising laminated veneer bamboo (LVB) as a primary structural material in high-rise residential buildings and evaluate the environmental potential of LVB through a comparative life cycle analysis (LCA). The process of life cycle analysis was completed through the development …

An Exploration Of Structural Timber Innovation, Simon Beskitt

Williams Honors College, Honors Research Projects

In many undergraduate programs of study, civil and structural engineering students are exposed to introductory material regarding timber construction. The information received in the undergraduate experience typically consists of a brief summary of the basic mechanical properties of wood but does not significantly cover timber design. Much greater emphasis is placed on design practices involving steel and concrete, likely due to their prominence in contemporary building trends in civil engineering. While it is true that wood is one of the older materials in terms of its utilization in structural and architectural design, it is certainly not an antiquated choice. Wood …

Wind-Induced Pressures In Air Permeable, Double-Layer Roof Systems In Regions Of Separated Flow, Jeong Hee Oh

Electronic Thesis and Dissertation Repository

This thesis is concerned with the wind-induced pressure distribution acting on air permeable, double-layer roof systems placed on low-rise buildings. Because of the pressure transmission into the cavity between layers, the pressure difference in the double-layer systems differs significantly from that in a single layer. The interior pressures (in the cavity between layers) are highly correlated with external pressures at the openings on the external surface of the outer layer and thereby, the net wind load for the design of the outer layer is considerably reduced by the pressure equalization between the external and internal surfaces of the outer layer. …

Compression Testing And Failure Modes Of Steel-Concrete Composite (Sc) Structures For Nuclear Containment, Patrick Michael Wanamaker, Amit H. Varma

The Summer Undergraduate Research Fellowship (SURF) Symposium

Although being able to provide much cleaner power than burning coal and other fossil fuels, nuclear power plants are still a tough sell to the general public due to their history of being spontaneously dangerous. The containment structures surrounding these nuclear plants, however, can play a huge role in reducing the risks associated with them. Relatively new designs for these containment assemblies, known as SC (steel-concrete composite) structures, aim to increase the strength and durability of the containment facilities while keeping costs down. By varying the spacing between shear studs, the ratio of concrete to steel, and the ratio of …

Seismic Performance Comparison Of A Fixed-Base Versus A Base-Isolated Office Building, Nicholas Reidar Marrs

Master's Theses

The topic of this thesis is base isolation. The purpose of this thesis is to offer a relative understanding of the seismic performance enhancements that a typical 12-story steel office building can achieve through the implementation of base isolation technology. To reach this understanding, the structures of a fixed-base office building and a base-isolated office building of similar size and layout are designed, their seismic performance is compared, and a cost-benefit analysis is completed. The base isolation system that is utilized is composed of Triple Friction Pendulum (TFP) bearings.

The work of this thesis is divided into four phases. First, …

Wind Loading On Trees Integrated With A Building Envelope, Aly Mousaad Aly, Alberto Zasso, Girma Bitsuamlak, Alberto Nicola Longarini, Arindam Gam Chowdhury

Faculty Publications

With the sustainability movement, vegetated building envelopes are gaining more popularity. This requires special wind effect investigations, both from sustainability and resiliency perspectives. The current paper focuses on wind load estimation on small- and full-scale trees used as part of green roofs and balconies. Small-scale wind load assessment was carried out using wind tunnel testing in a global-effect study to understand the interference effects from surrounding structures. Full-scale trees were investigated at a large open-jet facility in a local-effect study to investigate the wind-tree interaction. The effect of Reynolds number combined with shape change on the overall loads measured at …