Architectural Engineering Commons^™

2020 Scholarly Productivity Report, Missouri University Of Science And Technology

Civil, Architectural and Environmental Engineering Scholarly Productivity Reports

No abstract provided.

The Bridge Newsletter Winter 2020, Missouri University Of Science And Technology

The Bridge Newsletter

-Kummers give largest single gift in the history of Missouri higher education
-$1M gift from the Sunderland Foundation completes ACML lab
-Miner alumni step up
-Academy of Civil Engineers inducts 11 new members

Tanzanian Concrete Masonry Walls, Edward J. Kaminski

Architectural Engineering

Walls that replicate masonry walls used in Tanzania are constructed and tested. The results from testing was compared with the respective predictions made using code guidelines from ASCE 7 and TMS 402.

Effectiveness Of Building Systems Strategies For Mitigation Of Airborne Transmission Of Sars-Cov-2, Meng Kong, Jialei Shen, Bing Dong, Jianshun Jensen Zhang

Mechanical and Aerospace Engineering - All Scholarship

Airborne transmission has been recognized as a major transmission pathway for the infectious disease COVID-19. This study investigated the effectiveness of several indoor air quality (IAQ) control strategies on the mitigation of airborne transmission of SARS-CoV-2, the virus that causes COVID-19. The well-known airborne disease infection risk model (Wells-Riley equation) was used to estimate the infection risk of the SARS-CoV-2 in seven (7) different types of spaces including conference center/ballrooms, hotel bistro//cafeteria, hotel lobby, classrooms (lecture), conference room/small classroom, hotel or cruise ship guest rooms and open plan offices. The IAQ control strategies included increased ventilation rate, improved air distribution …

Investigation Of Modeling Strategies For Slender Lightly Reinforced Concrete Shear Walls, Jenna Marie Williams, Tracy Destiny Doan

Architectural Engineering: Graduate Reports

A large number of pre-1980’s non-ductile reinforced concrete (RC) structures in California utilizing RC shear walls to resist seismic lateral forces have been identified as deficient by industry practitioners. These non-ductile wall systems are typically lightly reinforced and lack adequate boundary element detailing. Analytical studies suggest these walls are susceptible to brittle, compression-controlled failure modes due to damage from concrete crushing and bar buckling. Furthermore, poor behavior of lightly reinforced concrete walls was observed in many recent earthquakes, for example in Chile (1985), New Zealand (2010/2011) and Mexico (2017). This has generated concern among engineers in high seismic regions around …

Wine History Project Pavilion, Douglas Mcarthur

Architectural Engineering

The Wine History Pavilion Project is a continuing endeavor of Cal Poly students working on an exhibitive, traveling structure for the San Luis Obispo community. The project started during the 2019 Fall Quarter in the interdisciplinary Integrated Project Delivery (IPD) Studio and has progressed to the detailed design stage for its eventual fabrication and installation. This report discusses the detailed design stage that 4th year Architectural Engineering student, Douglas McArthur, worked on.

Folded! High-Rise, Alejandra Bravo, Riley Joseph Denis

Architectural Engineering

The authors of this report are undergraduate Architectural Engineering students at California Polytechnic State University in San Luis Obispo. This report documents their experience in an interdisciplinary studio of high‐rise building design and the process by which they produced a schematic design of a high‐rise residential building in San Francisco. It will address the organization of the studio, the development of concept as well as form and structure, the studies and structural analyses, as well as the review process and the competitions the final proposals were entered in, and include some final takeaways from each Architectural Engineering group member.

Analysis Of Burning Wood In The Transient State And The Application To Structural Design, Roberta Veliz, Kimberly Guzman

Architectural Engineering

Determining the extent of the contribution of exposed timber on compartment fire dynamics in open floor plans is a complex process. Designers traditionally used compartmentalization design methods which create spaces where flashover is likely, given the fuel load and ventilation conditions. However, due to the large geometric dimensions and spread of fuel, fires in open floor plans are more likely to remain as localized or traveling fires. As such, an understanding of not only ignition potential but also flame spread is critical to characterizing the contribution of exposed timber. An integral step in characterizing the potential contribution is through an …

The Aloe: High Rise Schematic Design And Analysis, Tony Duc Nguyen, Lilliann Lan Lai

Architectural Engineering

The authors of this document are architectural engineering (ARCE) undergraduate students from California Polytechnic State University, San Luis Obispo (Cal Poly). They joined the 2020 Skyscraper Collaboratory as part of the ARCE course 415: Interdisciplinary Capstone Project. This course emphasizes the analysis and evaluation of interdisciplinary challenges associated with integrating the design and construction processes to deliver a project with respect to the design, quality, and performance expectations for a client or presented criteria. The course was taught in collaboration with industry partners and associates from the global architectural, urban planning, and engineering firm Skidmore, Owings & Merrill (SOM). Instruction …

Piazza Di Ulivo: Arce Patio Redesign, Sophia Kim-Oanh Ha, David Colman

Architectural Engineering

Piazza de Ulivo was Phase 1 of a multi-quarter initiative to redesign and bring life to a patio space adjacent to Engineering West (Building 21) in Spring of 2020. Located within the central courtyard of Engineering West (Hasslein Garden), the patio space previously contained a senior project pergola that collapsed and has been removed. The remaining elements from this previous structure were an inverted moment frame consisting of five concrete columns and beams joining them. Additionally, a wooden bench with concrete pedestals remained under the shade of the existing olive tree. Desire within the Architectural Engineering (ARCE) department for the …

A Case Study On How Insulated Concrete Forms Can Prevent Structure Loss During Wildfires, Charles Myron Ackley

Construction Management

ICFs are a building material with unique thermal insulating and non-combustible properties that have shown great potential at protecting a structure during a wildfire. To prove the hypothesis that ICFs can effectively prevent structure damage or loss during a wildfire, an analytical case study on an ICF home that survived the Camp Fire was conducted. The goal was to understand how ICFs unique thermal insulating and non-combustible properties protect structures from wildfires and how this assembly system can be a lot more effective than a traditional frame structure. Additional objectives for the project included highlighting the growing threat of wildfires …

Construction Of The Slo Botanical Gardens Foot Bridge - Interdisciplinary Project, Connor N. Layman

Construction Management

In the Winter quarter of 2020, a project based senior project was sought out by a Cal Poly Construction Management student, and he was connected with the San Luis Obispo Botanical Gardens (SLO BG). SLO BG is a non-profit organization located on 150 acres in the El Chorro Regional Park. After meeting with the SLO BG staff and exploring their many needed projects, the student and the staff mutually concluded that he would build a bridge and accompanying stairs which resided on a well-traveled trail on the property. He successfully developed the project schedule, budget, recruited an architect for design …

Evaluation Of The Dynamic Behavior Of Steel Staircases With Concrete Filled Pan Treads, Tyler Sondag

Durham School of Architectural Engineering and Construction: Dissertations, Thesis, and Student Research

Vibration serviceability of staircases has been a growing challenge for structural engineers due to changing materials and structural forms. In order to prevent or correct serviceability problems due to structural vibrations, structural engineers should be able to predict the dynamic performance of a staircase structure. However, there are few technical guides available for designing steel staircases, and the ones that do exist are often limited in their applications. Currently, there is a lack of research on staircases that are less prone to vibrations, such as staircases with concrete filled pans that are composed of face and wall stringers. Therefore, the …

The Impact Of Pev User Charging Behavior In Building Public Charging Infrastructure, Ahmad Almaghrebi

Durham School of Architectural Engineering and Construction: Dissertations, Thesis, and Student Research

Plug-in electric vehicles (PEVs) play a significant role in the development of green cities since they generate less pollution than conventional vehicles. To promote PEV adoption and mitigate range anxiety, charging infrastructure should be deployed at strategic locations that are readily accessible to the public. Nebraska is working on the expansion of charging infrastructure around the state; however, stakeholders face several difficulties in trying to minimize irregular charging behaviors. Most electric vehicle users plug in and leave their vehicles for an extended time at public parking lots designated for PEVs. Some users even leave their vehicles for longer than 24 …

The Bridge Newsletter Spring 2020, Missouri University Of Science And Technology

The Bridge Newsletter

-Studying fabrics, materials for facemasks
-New Missouri construction consortium
-Showalter honored by AGC
-New transportation center

Why Are Residential Property Developers In Ireland Not Using Bim?, Bim Tudublin, Simon Burke

Capstone Reports

The aim of this paper is to establish the level of BIM adoption by larger-scale residential property developers in Ireland and investigate the benefits and challenges of implementing BIM for residential housing. While BIM is a relatively new concept in Ireland for housing, developers and investors in larger scale developments are beginning to recognize areas where BIM can add value to their projects. The research also indicates that while there is evidence of successful BIM implementation for housing resulting in savings in cost and time, widespread adoption is hindered by a lack of knowledge and skills, costs of implementation, lack …

A Comparative Study Of Cadworx Plant 2018 And Revit 2020 With Ez-Iso Add-In, For The Production Of Piping Isometrics, Bim Tudublin, Killian Lynch

Capstone Reports

BIM software evaluation and selection is a complex process. In this paper, a comparative study of Revit 2020 with Ez-ISO add-in, and CADWorx Plant 2018, was carried out. The aim of this study was to determine if a MEP contractor could consolidate software usage into one package, thereby reducing costs for pipework modelling and isometric production. A comprehensive evaluation was developed based on a literature review. A multicriteria decision-making method was used in conjunction with the software evaluation to ensure sound choices were made. An online survey of senior BIM professionals was conducted to validate the analysis and findings. The …

A Critical Examination Of The Use Of Business Intelligence (Bi) In The Optioneering Of Generative Design Models: A Case Study., Bim Tudublin, Davitt Lamon

Capstone Reports

This research outlines the development of a generative des ign workflow for the architectural space planning of a 1,200 sq.m office located in Dublin, Ireland, and the application of statistical analysis and data visualisation for the optioneering of gen erated models. First, the paper defines a computational desig n model with the potential to generate a variety of office layouts, including circulation routes and desk locations. It then identifies three unique performance metrics that evaluate each design option. Finally, the study applies a multi objective genetic algorithm (MOGA) to explore the high dimensional design space of all potential options and …

A Critical Appraisal Of Findings And Solutions To Overcome Erroneous Bim Model Production And Information Delivery Workflows, Bim Tudublin, Ryan Forde

Capstone Reports

There are many varying definitions of Building Information Modelling, all of which reflect its transformative capabilities and impact on the construction sector. BIM is an emerging technological and procedural shift within the AEC industry (Succar, 2009). BIM is not just a technological change, but also a procedural and workflow change (Charles Eastman, 2018). Despite the growth of BIM adoption and increasing levels of maturity regarding BIM standards, numerous issues still arise at a micro level during project execution. BIM invokes the need for workflows, frameworks and processes that imparts knowledge, heightens trust, increases efficiency and consistency while reducing fragmentation and …

Can The Integration Of Bim And Gis Enhance Information Management For Large Scale Linear Infrastructure Projects?, Bim Tudublin, Brendan Kennedy

Capstone Reports

The integration of BIM and GIS is the subject of considerable research, particularly as the two coalesce for the purpose of information management. Large scale infrastructure projects require best practice in terms of how information is managed given the volume of information generated throughout the project lifecycle and the numerous parties requiring access to project content. This paper investigates whether the integration of BIM and GIS can enhance information management on large scale linear infrastructure projects. The research comprised a literature review and interviews with a number of BIM/GIS professionals actively working on linear infrastructure projects across the world. Some …

Peak Pressures On Low Rise Buildings: Cfd With Les Versus Full Scale And Wind Tunnel Measurements, Aly Mousaad Aly, Hamzeh Gol-Zaroudi

Faculty Publications

This paper focuses on the processes of wind flow in the atmospheric boundary layer, to produce realistic full-scale pressures for the design of low-rise buildings. CFD with LES turbulence closure is implemented on a scale 1:1 prototype building. A proximity study was executed computationally in CFD with LES that suggests new recommendations on the computational domain size, in front of a building model, apart from common RANS-based guidelines (e.g. COST and AIJ). Our findings suggest a location of the test building, different from existing guidelines, and the inflow boundary proximity influences pressure correlation and reproduction of peak loads. The CFD …

Achieving Sustainability Through Reducing Construction Waste During The Design Process: A Value Management Perspective, Ayman Ahmed Ezzat Othman, Sherouk Mohamed Abdelrahim

Architectural Engineering

Purpose:

The purpose of this paper is to investigate the role of Value Management towards achieving sustainability through reducing the construction waste during the design process.

Design/methodology/approach

To achieve the abovementioned aim, a research methodology consisting literature review and survey questionnaire is designed to achieve the following objectives: first, building a comprehensive understanding of the research topic through reviewing literature related to the nature of the construction industry, waste in construction, sustainability, the design phase and Value Management; second, presenting and analysing two case studies to validate the role of Value Management towards reducing waste in construction projects; third, conducting …

Safety Design Management Processes To Mitigate Design Errors, Hernan Guadalupe

Walden Dissertations and Doctoral Studies

Some organizations lack processes to mitigate design errors that may result in potential accidents or loss of life during building construction. Managers are concerned about preventing injuries and accidents, which may promote safer working conditions during construction. Grounded in the transformation-flow-value theory of production, the purpose of this qualitative single case study was to explore safety design management processes that managers use to mitigate errors. The participants included 7 members from 1 design firm with business operations in the United States northeastern region. Data were collected from semistructured interviews and company document reviews. Data were analyzed using Yin's 5-phase, where …

A Framework For Implementing Integrated Project Delivery In Architecture Design Firms In Egypt, Ayman Ahmed Ezzat Othman, Lamis Yasser Wagih Youssef

Architectural Engineering

Purpose

This paper aims to develop a framework for implementing the integrated project delivery (IPD) approach during the design process in architecture design firms (ADFs) in Egypt.

Design/methodology/approach

A research methodology consists of literature review, case studies and survey questionnaire was designed to achieve the abovementioned aim. First, literature review was used to identify and categorise the challenges of implementing IPD during the design process. Second, four case studies were analysed to investigate the values delivered to the client or missed due to the use of IPD or traditional procurement approaches, respectively. Finally, a survey questionnaire was carried out with …