Architecture Commons^™

Effects Of Rest Time And Curing Regime On Short- And Long-Term Strength Of Class C Fly Ash-Based Alkali-Activated Mortars, Cedric Kashosi, Ahmed Gheni, Eslam Gomaa, Mohamed Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study investigated how different rest times affect the strength development of fly-ash-based alkali-activated mortar (aam) over a period of 90 days. Two types of fly ash with varying calcium oxide contents of 37 and 21% were used. The rest times ranged from 2 to 36 h, and three curing methods (ambient, oven, and steam) were tested. The results showed that the rest time significantly influenced the compressive strength of the aam. The optimal rest time was found to be between 12 and 30 h depending on the curing method and fly ash type. Beyond this range, there were only …

A Review On Recent Deep Learning-Based Semantic Segmentation For Urban Greenness Measurement, Doo Hong Lee, Hye Yeon Park, Joonwhoan Lee

Landscape Architecture and Environmental Planning Student Research

Accurate urban green space (UGS) measurement has become crucial for landscape analysis. This paper reviews the recent technological breakthroughs in deep learning (DL)-based semantic segmentation, emphasizing efficient landscape analysis, and integrating greenness measurements. It explores quantitative greenness measures applied through semantic segmentation, categorized into the plan view- and the perspective view-based methods, like the Land Class Classification (LCC) with green objects and the Green View Index (GVI) based on street photographs. This review navigates from traditional to modern DL-based semantic segmentation models, illuminating the evolution of the urban greenness measures and segmentation tasks for advanced landscape analysis. It also presents …

Existing Implementation Tool Inventory, Adhban Farea, Rahat Ullah, Joe Harrington, Ted Mckenna, Sean Carroll

Tools

No abstract provided.

Material Passports – Challenges, Opportunities, And Future Directions, Ioannis Markou, Derek Sinnott, Ken Thomas

Reports

The Built Environment is one of the main contributors to global resource consumption, waste generation and greenhouse gas (GHG) emissions, exacerbating environmental degradation and climate change (MacArthur Foundation, 2022). Circular Economy and sustainability concepts have emerged as promising strategies to address those challenges (EUR-Lex, 2015; European Commission, 2019). The Circular Economy aims to minimise waste and resource depletion, while sustainability emphasises on meeting the current and future needs of society with minimal environmental impact (Pomponi and Moncaster 2017a; Çetin et al. 2021; MacArthur Foundation 2022). The digital transition, facilitated by technological advancements, can accelerate the adoption of Circular Economy principles …

Digitalisation For A Circular Economy (Dice), Jimmy Fahy, Conan O'Ceallaigh

Reports

The construction industry is the world’s largest consumer of resources and is responsible for approximately 40% of global carbon emissions. In EU countries, building infrastructure plays a more significant role in energy consumption (40%) and energy-related Green House Gas (GHG) emissions (36%) (European Union, 2024) and for Ireland, the total GHG emissions of the built environment are estimated at 23 MtCO2eq/yr based on the 2018 level, which accounts for approximately 37% of national emissions, comprising 23% from building operations and 14% from embodied carbon (EC) emissions (O’Hegarty and Kinnane, 2022). These current emissions levels are stark given Ireland’s current commitment …

Slr Practitioner Needs, Daniella Hirschfeld, Kelli Archie, Emilio Mateo, James C. Arnott, Julie A. Vano

Browse all Datasets

As sea levels continue to rise, practitioners at the local and regional scale are under increased pressure to reduce risks to people and property posed by the threats of sea-level rise (SLR) and associated impacts. To achieve this, a transdisciplinary approach that integrates data-driven research with local knowledge and community engagement is necessary. As such, it is imperative the science community understands the needs of practitioners. However, there has been little qualitative assessment of adaptation practice in coastal areas, especially with a focus on the needs of practitioners in making use of current SLR science. Our mixed-methods approach began with …

From Affordable To Equitable: An Analysis Of Affordable Housing As A Solution In A National Shortage, Machelle Cooper

Honors Program: Senior Projects (Public)

Amid a national shortage of housing, the United States needs housing solutions that both remedy infrastructural concerns imposed by outdated standards of urban development and address a widespread lack of equity across several urban areas. Conventional approaches to public housing have proven ineffective in promoting equitable change within underdeveloped contexts. These areas desire innovative, intentional interventions that adequately address all aspects of their social, economic, and environmental needs that existing patterns of development have neglected for decades. Public and state sentiments regarding areas of concentrated poverty and segregation in urban space must change for a future of equitable housing to …

Distribution Fitting And Anova Test To Analyze Pavement Sensing Patterns For Condition Assessments, Dada Zhang, Chun-Hsing Ho

Durham School of Architectural Engineering and Construction: Faculty Publications

Purpose – The purpose of this paper is to investigate the vehicle-based sensor effect and pavement temperature on road condition assessment, as well as to compute a threshold value for the classification of pavement conditions.

Design/methodology/approach – Four sensors were placed on the vehicle’s control arms and one inside the vehicle to collect vibration acceleration data for analysis. The Analysis of Variance (ANOVA) tests were performed to diagnose the effect of the vehicle-based sensors’ placement in the field. To classify road conditions and identify pavement distress (point of interest), the probability distribution was applied based on the magnitude values of …

Feature Engineering And Supervised Machine Learning To Forecast Biogas Production During Municipal Anaerobic Co-Digestion, Hunter W. Schroer, Craig L. Just

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Municipalities with excess anaerobic digestion capacity accept offsite wastes for co-digestion to meet sustainability goals and create more biogas. Despite the benefits inherent to co-digestion, the temporal and compositional heterogeneity of external waste streams creates operational challenges that lead to upsets or conservative co-digestion. Given the complex microbial bioprocesses occurring during anaerobic digestion, prediction and modeling of the outcomes can be challenging, and machine learning has the potential to improve understanding and control of co-digestion processes. Biogas flows are a surrogate for process health, and here, we predicted biogas production from historical data collected by a water resource recovery facility …

Southern Nevada Regional Industrial Study, Brookings Mountain West, Center For Business And Economic Research, Transportation Research Center

Policy Briefs and Reports

Recognizing the ongoing need to diversify the Southern Nevada economy, in 2023 GOED commissioned Brookings Mountain West, the UNLV Center for Business and Economic Research, and the UNLV Transportation Research Center to evaluate how Southern Nevada can leverage its geography and connectivity to neighboring states and metros at the megapolitan level to pursue industrial opportunities in the face of shifting global supply chains, diminishing developable land, the need for efficient management of the regional water supply, and the availability of unprecedented federal resources to support clean energy development, manufacturing, electrification of transportation systems, and supply-chain resiliency.

The study builds on …

Characterizing Chemistry And Microbiomes During Continuous Anaerobic Codigestion Of Organics And Cattle Manure Digestate, Emily V. Schmitz, Hunter W. Schroer, Timothy E. Mattes, Craig L. Just

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

We characterized chemical and microbial responses to changes in the carbon-to-nitrogen ratio (C:N) and organic loading rate (OLR) during anaerobic codigestion (ACoD) of cattle manure digestate mixed with industrial organics. C:Ns of 25 and 35, both operating at OLRs ≤ 4 gVS L-1 d-1, sustained methane production averages of 0.36 ± 0.03 L gVS-1 d-1 and 0.32 ± 0.05 L gVS-1 d-1, respectively, throughout a 15-day period. Using 16S rRNA high-throughput sequencing coupled with PICRUSt2, taxonomy and predicted gene abundances were mapped to the major ACoD stages. C:N (25, 35) and the OLR (2, 4 gVS L-1 d-1) had minimal …

Ua12/2/1 College Heights Herald: Inventing Yourself On The Hill, Wku Student Affairs

WKU Administration Documents

Magazine edition of the College Heights Herald for the period January 29 - March 3, 2024.

• Anderson, Alexandria. Letter from the Editor
• Costellow, Ali. Passions Provide Outlets for Self-Expression – Nathan Neal, Chase Winemiller, Gracie Silvia, Nico Silverthorn
• Reed, Bailey. Chinese Music Club Brings New Sound to the Hill
• Historic Building Makes for Unique Apartments – Columns, Bowling Green High School
• Parks, Adin. Inside the Bowling Green Warming Centers – Homeless
• Murray, Debra. Kentucky Museum Exhibits Curator Details Research on Women’s Culture – Tiffany Isselhardt
• Anderson, Alexandria. Who Owns WKU’s Dorms – Student Life Foundation, Hilltopper Hall
• Coppinger, Carrington. Forensics …

Methodology To Design Eco-Friendly Fiber-Reinforced Concrete For 3d Printing, Haodao Li, Alfred Addai-Nimoh, Eric Kreiger, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Greater use of locally available supplementary cementitious materials (SCM) to reduce cement content and addition of fiber reinforcement can enhance the performance of 3D printing (3DP) technology in construction. In this study, three classes of eco-friendly 3D printable fiber-reinforced mixtures were targeted, namely ultra-high-performance concrete (UHPC), high-performance concrete (HPC), and conventional concrete (CC). A step-by-step methodology was proposed to maximize the substitution rate of cement with SCM and limestone filler and optimize fiber volume for the successful development of 3D printable fiber-reinforced materials. Binder combinations were initially investigated on the paste level to determine the packing density and robustness. Selected …

Comprehensive Numerical Modeling Of Prestressed Girder Bridges Under Low-Velocity Impact, Mohamed T. Elshazli, Mohanad M. Abdulazeez, Mohamed Elgawady, Ahmed Ibrahim

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Accidental Collisions Involving Over-Height Trucks That Exceed Vertical Clearance Limits And Bridge Superstructures Frequently Happen, Resulting In Compromised Girders And Potential Threats To Structural Safety And Performance. The Numerical Simulation Of Large-Scale Prestressed Girder Bridge Collisions Poses Challenges Due To The Associated Nonlinearities, As Well As The Limited Availability Of Large-Scale Experimental Testing Data In The Literature Due To Cost And Complexity Constraints. This Study Introduces A Numerical Modeling Approach To Efficiently Capture The Response Of Prestressed Girder Bridges Under Lateral Impact Loads. A Finite Element (FE) Model Was Developed Using LS-DYNA And Meticulously Validated Against Experimental Data From The …

A Novel And Enhanced Calibration Of The Tilting Weir As A Flow Measurement Structure, Joseph E. Pugh, S. Karan Venayagamoorthy, Timothy K. Gates, Céline Berni, Marie Rastello

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A large collection of laboratory measurements of piezometric head (h) and discharge (Q) were made over hydraulic models of a tilting weir at nine different angles, ranging from 25.7° to 90° within a 0.3-m-wide flume. These measurements were corroborated with additional laboratory data taken within a 1-m-wide flume across four inclination angles. The range of both inclination angle (θ) and flow scale examined in this study elucidate the nature of the head-discharge rating equation beyond previous work. Results show that as θ decreases under a constant Q, the h over the weir decreases in a monotonic fashion due to the …

A Framework For Eradicating Women Discrimination In Architectural Design Firms In Egypt And Gcc Countries, Ayman Ahmed Ezzat Othman, Rodayna Ehab Hegazy

Architectural Engineering

Purpose – This research aims to develop and validate a framework for eradicating women’s discrimination in architectural design firms (ADFs) in Egypt and propose strategies for prospective adoption in the Gulf Cooperation Council (GCC) countries to increase the transformational impact of women on the architectural and urban developments of the Gulf region.

Design/methodology/approach – Acombined qualitative and quantitative research approach was designed to accomplish four objectives. Firstly, to investigate the nature of business in ADFs, women’s discrimination and policies for gender equity (PGE) in architecture. Secondly, to analyse three case studies to validate the identified causes and impacts of women’s …

Natural Gas Induced Vegetation Stress Identification And Discrimination From Hyperspectral Imaging For Pipeline Leakage Detection, Pengfei Ma, Ying Zhuo, Genda Chen, Joel G. Burken

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Remote Sensing Detection of Natural Gas Leaks Remains Challenging When using Ground Vegetation Stress to Detect Underground Pipeline Leaks. Other Natural Stressors May Co-Present and Complicate Gas Leak Detection. This Study Explores the Feasibility of Identifying and Distinguishing Gas-Induced Stress from Other Natural Stresses by Analyzing the Hyperspectral Reflectance of Vegetation. the Effectiveness of This Discrimination is Assessed Across Three Distinct Spectral Ranges (VNIR, SWIR, and Full Spectra). Greenhouse Experiments Subjected Three Plant Species to Controlled Environmental Stressors, Including Gas Leakage, Salinity Impact, Heavy-Metal Contamination, and Drought Exposure. Spectral Curves Obtained from the Experiments Underwent Preprocessing Techniques Such as Standard …

The Contribution Of Smart Parks To Achieving The Resilience Of Cities, Mohamed E. Elattar

Architectural Engineering

No abstract provided.

Practitioner Needs To Adapt To Sea-Level Rise: Distilling Information From Global Workshops, Daniella Hirschfeld, Ray Boyle, Robert J. Nicholls, David Behar, Miguel Esteban, Jochen Hinkel, Gordon Smith, David J. Hanslow

Landscape Architecture and Environmental Planning Faculty Publications

Climate-induced sea-level rise threatens the world’s coastal populations, critical infrastructure, and ecosystems. The science of sea-level rise (SLR) has developed to inform understanding of global climate mitigation and adaptation challenges, but there is much less engagement with practitioners to discern their climate services needs and support the development of adaptation planning and action on the ground. In addition, adaptation planning and implementation processes for SLR are relatively new and practitioners developing leading practices are seeking interaction with their peers and the SLR science community. To address these gaps, we co-produced online global workshops with sixty-nine practitioners from twenty-six countries. These …

Resilient Education Facilities With Special Focus On Classrooms To Be Compatible With The Covid-19 Crisis, Gehan Nagy, Gehan Nagy, Khaled Dewidar, Omar Atef A

Architectural Engineering

In recent months, the World Health Organization (WHO) expressed concern about the spread of a new pandemic after the COVID-19 pandemic, which had a significant impact on education. UNICEF says Over 168 million children’s classrooms around the world have been shuttered. Therefore, the main aim of this study is to identify the criteria and requirements of resilient design for classrooms to avoid closures during crises. Researchers have addressed the relationship between spaces and the spread of viruses inside them, so the research assumes that there is a relationship between the design criteria of classrooms and the spread of viruses inside …

Characterization Of Alkali-Silica Reaction (Asr) Products And C-S-H Using Swir Spectroscopy For Nondestructive Detection Of Asr, Pengfei Ma, Wenyu Liao, Ying Zhuo, Hongyan Ma, Yanping Zhu, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study explores the feasibility of characterizing alkali-silica reaction (ASR) products and calcium silicate hydrates (C-S-H) from short-wave infrared (SWIR) spectroscopy. ASR products and C-S-H samples with different Ca/Si ratios were synthesized and analyzed through XRD, 29Si nuclei magnetic resonance (NMR) and SWIR spectroscopy. Fourier-transform infrared spectroscopy (FTIR) was collected to help interpret the results from the SWIR spectroscopy. The obtained spectroscopic features were applied to quantify the ASR product abundance denoted by the length expansion of mortar bars after an accelerated ASR test. The results show that the SWIR spectra of the synthetic ASR gels are similar regardless of …

Evolution Of Sbs-Modified Asphalt Performance Under Aging And Rejuvenation Cycle Conditions, Ke Shi, Feng Ma, Jenny Liu, Zhen Fu, Ruimeng Song, Dongdong Yuan, Aboudou Wassiou Ogbon

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Improving the poor long-term service performance of rejuvenated SBS-modified asphalt (REF-LT) is highly challenging. In this study, a blend of aged and virgin binders was used to rejuvenate REF-LT and the evolution of the asphalt performance was observed during regeneration and reaging processes. An SBS-modified asphalt (SBM) and base asphalt (BA) were mixed with REF-LT in specified ratios to prepare SBM- and BA-rejuvenated asphalts. The rejuvenated asphalts were subjected to short- and long-term aging. The high/low-temperature rheological properties, fatigue resistance, rejuvenation mechanism, and changes in the functional groups of the rejuvenated and reaged asphalts were characterized using a dynamic shear …

Numerical And Experimental Investigation Of Negative Stiffness Beams And Honeycomb Structures, Yasser Darwish, Mohamed A. Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Metamaterial structures that exhibit negative stiffness (MSNS) behavior have shown the potential to be used as energy dissipation systems in different applications. Negative stiffness honeycomb structures consist of multiple pre-buckled beams that snapping through from one pre-buckled mode to another buckled mode, when subjected to transverse loads, displaying negative stiffness, and dissipating a significant portion of the input energy. This paper presents finite element models (FEMs) developed to investigate the performance of negative stiffness pre-buckled beams and honeycombs. The FEMs were validated using experimental results of single pre-buckled beams and honeycomb structures. The experimental testing of the pre-buckled beams was …

From Pumping To Deposition: A Comprehensive Review Of Test Methods For Characterizing Concrete Printability, Ali Fasihi, Nicolas A. (Ali) Libre

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

3D concrete printing (3DCP) technology has gained significant attention in the construction industry due to its potential to revolutionize the way buildings are designed and constructed. However, successful application of 3DCP requires robust standard test procedures to characterize the printability of concrete. Printability is a measure of workability for a printing material in the 3DCP process, which is characterized by pumpability, extrudability, and buildability. This paper presents a comprehensive review of the test methods that could be used for material characterization during various printing steps, including pumping, extrusion, and layer deposition. The underlying mechanisms relevant to each step, key governing …

Synergistic Effect Of Macro Synthetic Fiber And Shrinkage-Reducing Admixture On Engineering Properties Of Fiber-Reinforced Super-Workable Concrete, Jingjie Wei, Nima Farzadnia, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study aims to enhance fiber-reinforced super-workable concrete (FR-SWC) by optimizing the system of shrinkage-reducing admixture (SRA) and macro-synthetic fiber (MSF) for low shrinkage and uncompromised mechanical properties. A factorial design approach was employed to model the effect of fiber content, SRA dosage, and combined ratios of two types of MSF on performance of FR-SWC. MSF content had the greatest impact on mechanical properties, followed by SRA and MSF combination. Using MSF increased equivalent flexural strength ratio by 310% compared to the control mixture, regardless of MSF combination and SRA. SRA had the most significant effect on drying shrinkage, followed …

Evolvement Of Excusable Delay Clauses In Government Contracts Since The Covid-19 Pandemic, Jung Hyun Lee, Yunping Liang, Seyed Mohammad Ehsan Tabatabaee, Bryce Riccitelli

Durham School of Architectural Engineering and Construction: Faculty Publications

Excusable delay clauses in government construction contracts, often considered boilerplate with minimal modifications, have increased in attention since the outbreak of COVID-19. Despite the studies enumerating triggering events of the clause in the background of the pandemic, it is necessary to capture insights into how the unprecedented event is systematically accommodated by contract languages. The overarching goal of this study is to identify changes in contract languages over the pre-and post-pandemic eras by state departments of transportation (DOTs), focusing on excusable delay clauses. This study conducts a content analysis and a comparative analysis of state DOT construction contract documents, including …

The Juan De La Cruz Molino: Folk Architecture At El Güique-Estaca New Mexico, José A. Rivera Ph.D

Faculty Publications

El Güique and Estaca are twin communities just north of the confluence of the Río Grande and the Río Chama. Like other Spanish colonial settlements in the historic Río Arriba, acequia-based agriculture was essential for food production in this high desert region of the northern Río Grande. Along with the construction of acequias, molinos (grist mills) were built to grind wheat into flour as part of the subsistence farming economy of the times. While acequias were communal, molinos most often were constructed and operated as private enterprises by local millers like the case of Juan de la Cruz Borrego and …

Hygrothermal Risk Assessment Of External Wall Insulation Retrofit To Non-Traditional Wall Types In An Irish Context, Using The Glaser Method And A Heat, Air And Moisture Transient Model, Gareth Mcdonnell, Joseph Little

Articles

The Climate Action Plan 2019 targets the low-energy retrofit of 500,000 existing Irish homes before 2030.1 Up to 80 per cent of building failures can be attributed to moisture risks.2 The literature indicated that external wall insulation (EWI, ETICS) failures are mostly due to moisture ingress at junctions and interfaces. A hygrothermal risk assessment of EWI on three walls with rendered concrete/concrete blockwork/cavity walls in Dublin, Belfast and Belmullet was undertaken using transient numerical simulation and the Glaser method. The guidance, common practice indicates a preference for Glaser. The initial simulation results were compared to assess the appropriateness of Glaser. …

Research Space At Public R1 Universities In The Mountain West, 2021, Zachary Billot, Jesse Fager-Larsen, Caitlin J. Saladino, William E. Brown Jr.

Higher Education

This fact sheet reports data on research space square footage for public R1 universities in five Mountain West States: Arizona, Colorado, Nevada, New Mexico, and Utah. This fact sheet includes national rankings of public R1 universities in the Mountain West states based on total square footage and reports square footage for individual research disciplines for the two public R1 universities in Nevada: the University of Nevada, Las Vegas (UNLV) and the University of Nevada, Reno (UNR).

Use Of Hybrid Fibers And Shrinkage Mitigating Materials In Scc For Repair Applications, Kamran Aghaee, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Self-consolidating concrete (SCC) is used to repair structural elements with congested reinforcement or restricted access to placement and consolidation. In addition to adequate flowability, passing ability, filling capacity, and stability, adequate bonding to the substrate and reinforcing bars, low shrinkage and cracking resistance are required for successful repair. This study employs various shrinkage mitigating materials, including expansive agent (EA), coupled use of EA with shrinkage reducing admixture (SRA), and EA with pre-saturated lightweight sand (LWS) to fulfill these requirements. The effect of these materials on the performance of SCC made with a hybrid synthetic (PP) fiber and a hybrid steel-synthetic …