Architecture Commons^™

The Dynamic Stability Of The Sewing Needle’S Mechanical Vibrations Under The Impact Of A Time-Dependent Penetration Force In The Multilayered Sewn Fabrics, Wael A. Hashima, Ibrahim A. Elhawary

Mansoura Engineering Journal

In this work the dynamic stability of the mechanical vibrations of the sewing needle during sewing process under the impact of the time dependent penetration force (cyclic type) were studied. The many mathematical equations were written and explained for both of the sewing needle dynamics and penetration force mechanics. They were related to the regions of sewing needle stability regions either mathematically or graphically. Mate equation (difficult one) was refereed to help in investigation the sewing dynamic stability during sewing process.

A 10-Gb/S Single-Loop Half-Rate Dll-Based Clock And Data Recovery Circuit For Forwarded-Clock Wireline Transceivers, Abdallah K. Mohamed, Sameh A. Ibrahim, Mohy Eldin A. Abo-Elsoud

Mansoura Engineering Journal

This paper introduces a 10-Gb/s single-loop, half-rate delay-locked loop (DLL)-based clock and data recovery (CDR) circuit for forwarded-clock (FC) wireline transceivers. The proposed CDR employs a differential ring oscillator (RO) with sub-feedback loops structure for multi-phase clock generation with a single-loop operation. An Alexander phase detector utilizing a flip-flop based on an improved true single-phase clock (TSPC) logic with split outputs is adopted. The proposed DLL-based CDR is an optimized solution in terms of area and power for FC wireline transceivers. The recovered clock exhibits an RMS jitter of 590 fs and a peak-to-peak jitter of 3.8 ps. The circuit …

Laboratory Characteristics, Performance Evaluation, And Agency Cost Analysis Of Cold-Recycled Asphalt Mixtures, Marwa B. Elaskary, Ahmed M. Awed, Alaa R. Gabr, Sherif M. El-Badawy

Mansoura Engineering Journal

This technical study offers a comprehensive investigation into the utilization of Cold Recycled Asphalt Mixtures (CRAMs) with varying proportions of Reclaimed Asphalt Pavement (RAP) in the context of pavement maintenance applications. The study encompasses a multi-faceted analysis, encompassing laboratory mix design requirements, mix performance evaluations, and a thorough assessment of economic benefits, with the overarching goal of promoting the sustainable adoption of CRAMs in pavement maintenance. To achieve the objectives of the research, five ratios of RAP to virgin aggregates (VA) of (0%:100%), (25%:75%), (50%:50%), (75%:25%), and (100%: 0%). The research encompasses a wide array of laboratory tests and investigations …

Impact Of Traffic Congestion On Transportation System: Challenges And Remediations - A Review, Hamdy B. Faheem, Amira M. El Shorbagy, Mohamed Elsayed Gabr

Mansoura Engineering Journal

Traffic congestion is a growing problem in urban transportation networks around the world, having major consequences for the economy and the environment. As metropolitan populations rise and more people rely on autos for mobility, traffic congestion is becoming more common and severe. This review paper presents an overview of the economic and environmental issues caused by traffic congestion in urban areas, as well as proposed ways to reduce its negative effects. It discusses potential traditional transportation solutions such as traffic management infrastructure development, improving public transportation, and intelligent transportation solutions to address traffic congestion problems such as smart parking systems, …

The Role Of Smart Systems In Conservation On Sustainability Of Heritage Buildings, Aml Abd El-Wareth Mohamed

Mansoura Engineering Journal

Abstract— Historic cities with challenges in trying to integrate their heritage buildings to keep pace with the age of technology, by developing a vision for an intelligent environment (IE) of the future that would integrate smart systems for conservation on heritage. Recent, information and communications technology (ICT) progress has diverse smart heritage solutions, enhancing efficiency, sustainability, and longevity for future generations. Research problem includes challenging the possibility of integrating smart systems into heritage buildings while conserving its values, identity, and using it effectively, sustainably manner, also no comprehensive model for smart technology integration in heritage buildings for automation and control …

Application Of Machine Learning Models In The Capacity Prediction Of Ccfst Columns, Khaled Megahed, Nabil Said Mahmoud, Saad Elden Mostafa Abd-Rabou

Mansoura Engineering Journal

Circular concrete-filled steel tubular (CCFST) columns are widely utilized in structural engineering due to their impressive load-bearing capabilities and ductility. Existing design standards often yield disparate outcomes when applied to structural columns with identical properties, introducing uncertainty for engineering designers. This study introduces an innovative technique to address these challenges using two machine learning (ML) models: Gaussian process regression (GPR) and extreme gradient boosting (XGBoost). These models consider various input variables, including the geometric and material properties of CCFST columns, to estimate the compressive strength. The models undergo training and evaluation using two datasets comprising 1004 axially loaded CCFST columns …

Numerical And Analytical Solution For Nonlinear Free Vibration Of Tapered Beams, Zain Abu Shaeer Abu Shaeer, Ramy I. Shahin, Galal I. El-Baghdady, Saad A. Yehia

Mansoura Engineering Journal

This study introduces a computational approach that combines numerical and semi-analytical methods to solve tapered beams' nonlinear free vibration equation. The study employs a numerical approach that relies on the cubic B-spline collocation method and an approximation technique known as the Homotopy perturbation method to approximate the solution to the equation governing nonlinear large-amplitude free vibrations of tapered beams. The effect of vibration amplitude on the frequency of nonlinear vibrations is investigated. The next step is to look at different ways to get close to exact solutions across the whole range of oscillation amplitude. This will show how useful and …

Deep Learning Based Classification Of Focal Liver Lesions With 3 And 4 Phase Contrast-Enhanced Ct Protocols, Ahmed El-Emam, Hossam El-Din Moustafa, Mohamed Moawad, Mohamed Aouf

Mansoura Engineering Journal

It had been noticed that 3-phase and 4-phase computed tomography protocols with contrast serve as standard examinations for diagnosing liver tumors. Additionally, many patients require periodic follow-up, which entails significant radiation exposure for them. Advancements in image processing facilitate automated liver lesion segmentation. However, the challenge remains in classifying these small lesions by doctors, especially when the liver has different types of lesions with very little intensity difference. Therefore, deep learning can be utilized for the classification of liver lesions. The present work introduces a CNN-based module for the classification of liver lesions. The module consists of four stages: data …

Effect Of The Shape And Volume Of Capsulated Phase Change Materialon The Melting Process And Exergy Efficiency, Ahmed Saad Soliman, Ahmed A. Sultan, Mohamed A. Sultan

Mansoura Engineering Journal

Due to the lack of solar energy continuity throughout the day, researchers tended to store this energy in phase change materials (PCM). The goal is to store a big amount of energy in a small PCM mass. In this study, the effect of the capsule shape (circular and elliptical cross-section), number of capsules with the same volume (1, 2, 3, 4, and 5 capsules), and one capsule with increasing its initial volume (multiplying of volume ratio 1 (Vr = 2, 3, 4, and 5)) on the PCM melting process was studied. The results of the numerical model for both circular …

Machine Learning-Based Prediction Of International Roughness Index For Continuous Reinforced Concrete Pavements, Ragaa T. Abd El-Hakim, Ahmed N. Awaad, Sherif M. El-Badawy

Mansoura Engineering Journal

The International Roughness Index (IRI) serves as a crucial indicator for ride quality and user comfort. As road roughness escalates, road serviceability diminishes, resulting in reduced vehicle speed and increased travel time, and consequently higher carbon dioxide emissions. Predicting the IRI is of utmost importance for Pavement Management Systems and sustainable development overall. While numerous studies have forecasted the IRI of flexible pavements, there is a notable scarcity of research focusing on rigid pavement performance prediction. This study addresses the gap in predicting IRI for Continuous Reinforced Concrete Pavements (CRCP), an understudied aspect of pavement engineering. Leveraging the Long-Term Pavement …

The Mechanical Performance Of Sustainable High Performance Concrete Containing Hybrid Polypropylene Fibers And Exposed To Elevated Temperatures, Ahmed M. Tahwia, Marwa M. Ouda, Mohamed Abdellatief, Walid E. Elemam

Mansoura Engineering Journal

The purpose of this research is to investigate the impact of hybrid micro and macro polypropylene fibers (PPFs) on the mechanical characteristics and microstructure of high performance concrete (HPC). Seven concrete mixes with different contents of hybrid polypropylene fibers were tested. The tests included the slump test, compressive and flexural strength, resistance to elevated temperatures, and concrete microstructure. Compared to the control mixture, introducing macro and micro polypropylene hybrid fibers to HPC mixes dramatically enhanced the flexural and compressive strength of concrete while lowering workability. HPC compressive and flexural strengths decrease as temperature rises, nevertheless, the strength loss rate was …

Retrofitting The Building Materials And Techniques Of A Residential Villa: Finding Alternative Solutions, Ahmed Abdelmonteleb M. Ali, Essam S. Almahmoud, Azzam I. Aljutayli, Basem O. Elgendy, Meshal A. Alhrabi, Khattab I. Alyahya

Mansoura Engineering Journal

Approximately 40% of greenhouse gas emissions globally are attributed to the construction industry, with building materials alone accounting for 11%. This study evaluated several building materials and techniques to investigate alternative possibilities for retrofitting a residential villa. The research methodology thoroughly evaluated the building materials and techniques employed in a Saudi villa as a case study located in Buraidah within the Al-Qassim Region. This examination included the structural integrity and cost comparison between the current and suggested scenarios. Alternative building materials and methods are discovered, and their possible application in retrofitting the villa is examined based on this evaluation. The …

Neural Network-Based Fault Distance Estimation For Multi-Terminal Dc Microgrids, Mohamed Elmadawy, Abdelhady Ghanem, Sayed Abulanwar, Ahmed Shahin

Mansoura Engineering Journal

Fault distance estimation in DC microgrids is a critical issue due to the growing adoption of DC-based distribution systems. Current methods face limitations like sensitivity to system parameters and high-resistance fault detection, necessitating improved accuracy. This study proposes a neural network approach to accurately locate fault distances in multi-terminal DC microgrids. Three different structures based on backpropagation algorithms are developed and trained to estimate fault distances with high precision. These structures can handle various fault scenarios, including different fault resistances and the presence of noise. Two of the structures can predict fault distances from one side locally, achieving low error …

Influence Of Macro-Synthetic Fibers On The Flexural Behavior Of High Strength Concrete Beams Reinforced With Gfrp Bars, Maryam M. Koura, Ahmed M. Tahwia, Mohamed H. Matthana

Mansoura Engineering Journal

Rusting of steel reinforcement in marine environments causes the overall destruction of reinforced concrete constructions; steel rebars in concrete members have been replaced with fiber-reinforced polymer (FRP) bars in recent years. To enhance the shear behavior of glass (GFRP) bars reinforced concrete (RC), macro-synthetic polyolefin (PO) fiber was added. These materials have a low modulus of elasticity, a high tensile strength, and a linear stress-strain response to full failure. This study investigates the effect of macro synthetic structural fibers on the post-cracking and deformability properties of high strength concrete reinforced with FRP bars without transverse reinforcement. Eight full-scale RC beams …

Effect Of Rows And Columns On The Heat Transfer Characteristics Of Pcm Staggered Capsules Bundle, Ahmed Saad Soliman, Ahmed A. Sultan, Mohamed A. Sultan

Mansoura Engineering Journal

The current work is a heat exchanger (H.EX) incorporating several oval capsules filled with PCM as staggered bundles in a shell. Through the charging process, the PCM, initially at 299 K, is heated by passing a cross flow of hot water in the upward direction by a value of 343K. After complete melting, the solidification process is started by passing water at a temperature of 283 K. The proposed unit is studied with different rows (3, and 5 rows), and columns (3, and 5 columns), including 8, 13, 14, and 23 capsules. The number of rows and columns gets four …

Unleashing The Potential: The Impact Of Biophilic Office Design On Enhancing Employee Productivity, Asmaa Elantary

Mansoura Engineering Journal

The observed landscape influences people in numerous ways, including aesthetic appreciation, health, and well-being. The evidence of health benefits associated with viewing those landscapes has proven exceptional value. A comprehensive review of papers on landscapes and sound effects on health was conducted. According to a growing body of evidence, exposure to visible landscapes positively affects one's health and fitness. The most pressing social and economic challenge now is increasing worker productivity, attracting, and retaining exceptionally talented employees, and improving overall employee performance. This will not happen unless companies provide a safe, comfortable, and stimulating work environment; this will not happen. …

Environmental Impact Assessment Of Water Desalinating Systems: Kuwait As A Case Study, Eissa S. Al-Mutairi, Ibrahim.G. Rashed, Mohamed.M. El-Halwany, Mohamed A. Mosaad

Mansoura Engineering Journal

The challenge of managing water resources is intensifying due to rapid urbanization, population expansion, and the growth of industry and agriculture. Furthermore, the looming threat of climate change significantly impacts both water resources and crop yields. In Kuwait, the majority of its potable water supply is dependent on seawater desalination. Specifically, multistage flash (MSF) desalination accounts for nearly 90% of the country's total desalination capacity, while the remaining 10% is generated using multi-effect distillation (MED) technology. Nevertheless, the environmental repercussions of desalination on Kuwait's ecosystem remain a subject of profound concern. This study employs a comprehensive approach, utilizing peer-reviewed journal …

Power Generation And Water Conservation Potentials For Several Photovoltaic Configurations Installed Over A Fresh Water Surface, Rana A. Kewan, Mohamed S. Salem, Mohamed R. Elmarghany, Maher Bekheit, Gamal I. Sultan

Mansoura Engineering Journal

One of the challenges that face photovoltaic systems is depleting performance if their average temperature increases due to solar radiation. Floating photovoltaic (FPV) and submerged photovoltaic (SPV) systems offer a potential solution to such problem. Another major benefit is the decrease of water evaporation by creating an artificial shadow over water. In this paper, an experimental study is presented that includes three different systems: an inclined PV by 30⸰ over water (IPV), an SPV, and an FPV systems and compares their performance with that of a conventional PV system under the same operating conditions. The FPV and SPV systems exhibited …

Glaucoma Diagnosis Using Hybrid Neural Encoder Decoder Based Unet Hybrid Inception, Akanksha Bali, Vibhakar Mansotra

Mansoura Engineering Journal

The anatomy of the retinal fundus picture, which includes the optic disc, affects how glaucoma characteristics are extracted. One of the main causes of blindness in the globe is glaucoma. Correct glaucoma screening in its early phases is difficult since the condition only becomes apparent when its symptoms are severe. If glaucoma is not treated, the optic nerve head (ONH) will be harmed, resulting in vision loss. Nevertheless, there are currently not enough eye experts accessible, and eye screening is personal, time-consuming and labor-intensive. Therefore, this is a real issue that can be addressed by automatically diagnosing glaucoma using deep …

Smart Agriculture Based On Iot Using Drones: A Survey, Shymaa G. Eladl, Hanaa Y. Zaineldin, Amira Y. Haikal, Mahmoud M. Saafan

Mansoura Engineering Journal

Researchers have studied the potential of unmanned aerial vehicles (UAVs) for real-time visual data acquisition and processing using potent deep learning (DL) algorithms over the past few decades. In this regard, drone use in smart cities has become one of the most common uses for them in recent years. UAVs and the Internet of Things (IoTs) are two popular technologies being used in smart agriculture that are ushering in a new era of agriculture by replacing traditional farming methods. The combination of drones and IoT has the potential to drastically change our lives through real-time data collection and analysis that …

Maximum/Minimum Output Current Extraction Based Open-Switch Fault Diagnosis Of Voltage Source Inverter, Ahmed S. Gardouh, Eid Gouda, Abdelhady Ghanem

Mansoura Engineering Journal

Three-phase induction motor drive systems face significant susceptibility to critical failures arising from open switch faults within the power electronic converter. Implementing monitoring and early fault detection mechanisms for such occurrences not only enhances system reliability but also ensures the safe and uninterrupted operation of the motor drive system. This study introduces an innovative real-time open switch fault detection technique for voltage source inverters fed induction motor drives, leveraging motor stator current analysis. The method aims to track maximum and minimum values of current signals over one cycle. Unlike many current signal-based approaches that require modifications to be integrated with …

Establishing A Quantitative Assessment Tool For Biophilia In Healthcare Facilities, Sara Moustafa Fouda, Mohanad Ali Fouda

Mansoura Engineering Journal

This study aims at developing a novel assessment tool that can quantitatively evaluate the level of biophilia integration in healthcare facilities. The developed assessment tool helps to address the difficulty of biophilia quantification in the built environment due to the broad nature of the biophilia concept. The methodological approach for the tool depends on employing biophilic design patterns as a basis for biophilia, where these patterns are correlated to a group of biophilia-related features of the WELL Building Standard. This correlation is attained through a list of Integrated Design Guidelines (IDGs) that is proposed to act as an intermediate ground …

Enhancing The Garment Quality Through The Integration Of Statistical Techniques, Magdi El Messiry, Affaf Al-Oufy, Heba Marwan, Samar Abd-Ellatif

Mansoura Engineering Journal

The textile and apparel sector has always held significant strategic value for the economies of numerous developing countries. These industries represent vital components of manufacturing and exports, playing a major role in employment opportunities. Within the realm of garment production, a strong emphasis on quality is maintained throughout the entire process, starting from sourcing raw materials and extending to the final stages of garment completion.

This research undertaking involves a comprehensive analysis, classification, and evaluation of defects in fabrics and garments. Frequencies and distributions of these defects are being looked after with great caution. To enhance product quality, the application …

Design And Construction Of A Novel Reciprocating Pin-On-Plate Wear Testing Machine, Yasser S. Mohamed, Ahmed Abdelbary

Mansoura Engineering Journal

This manuscript introduces a new pin-on-plate tribometer established for a study of the tribological behavior of materials at a constant sliding speed. The originality of this test rig lies in its capability to perform six independent tests at the same time. Wear tests can be conducted with high reliability and low error thanks to the high rigidity of the machine. The reciprocating motion of the counterface was designed to be in an arc path. The tribometer has the facility of changing the applied load and the length of the wear path. The test machine can used to perform both dry …

Knowledge Gap Analysis For Efficient Form-Finding Of Lightweight Structures, Shorouk Mohamad Khedr, Mohamed Esmat Elattar, Ahmed Eltantawy, Esraa Elazab

Mansoura Engineering Journal

Historically, Performance assessment of temporary structures’ form was substantially dependent on how loads transfer along geometry. Fortunately, the development of tools has enabled designers to explore more design variations as well as testing their feasibility. This study aims to address the knowledge gap between design process, tool contributions and feasibility requirements of temporary structures. This will be achieved through analyzing the evolution of temporary structures’ design approaches including early form finding approaches, geometrical properties dependencies, reflections of both bottom -top and top-bottom approach as well as linking them to material innovations, structural contributions and manual experiments. As a result, the …

Building Services Engineering January/February 2024

Building Services Engineering

No abstract provided.

A Novel Method For The Production Of Pig Iron In “Hadisolb” Company (Industrial-Scale Experiments), El-Sayed A. Rassoul

Mansoura Engineering Journal

The chairman of “Hadisolb” had submitted a memorandum in 1977 in which he claimed that the company will never achieve its designed capacity unless it gets rid of the threatening impurities -high alkalis & MnO- in the blast furnace burden. Meanwhile, the DR steel companies are suffering from the generated accumulated wastes which contain > 67% Fe, zero% alkalis and traces of MnO. The novel idea here is finding the best ratio between El-Gedida ore and the waste material (W.M.). In a previous investigation a series of pilot-scale sintering experiments were performed and it was concluded that the blend containing 70% …

Assessing The Utilization Of Glazing Types And Alternatives In Office Buildings To Reduce Energy Consumption And Carbon Emissions, Eman Badawy Ahmed

Mansoura Engineering Journal

According to Egypt's Vision 2030 and the recommendations of the Climate Conference, Cop 27, Egypt seeks to reduce energy consumption and emissions, especially carbon, by calculating the carbon footprint and moving towards issuing carbon certificates.
The elements of the building envelope have a strong impact on energy consumption and carbon emissions. Glass is one of the most influential elements. Therefore, it is necessary to study the effect of glassing on energy consumption.
The study aims to evaluate the use of glazing types and their alternatives to reduce energy and carbon consumption in administrative buildings by developing an estimation approach for …

Photogrammetry-Based Method For Measuring Volume Changes Of Soil Specimens During Critical Phases Of Triaxial Testing, Sara Fayek, Xiong Zhang, Pingxin Xia

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Triaxial tests has been routinely used to measure the stress–strain relationship for geomaterials. During triaxial testing, many sources of errors that cannot be completely avoided but are often ignored or approximated using empirical equations. This paper presents a systematic investigation of soil volume change, volume strain nonuniformity, and cross-sectional calculation along the specimen during triaxial testing using a photogrammetry-based method. Consolidated drained triaxial tests were performed in which two parallel measurements were taken: (1) relative volume using the conventional triaxial testing and (2) absolute volume using the photogrammetry-based method. The difference in the observed volume and void ratio measurements between …

Effect Of Concrete Mix Design Factors On Static Yield Stress Changes Due To Vibration, Ahmed Abd El Fattah, Dimitri Feys, Kyle Riding, Syed Imran

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Digital fabrication of concrete structures has gained substantial research traction over the last decade, enabling efficient material use and adding more architectural freedom. Current research focuses on chemical and mineral admixtures, as well as manipulating the cement hydration reaction to control the yield stress evolution with time in the cement paste. Instead of providing yield stress through the concrete fluid properties, a high yield stress can be provided by interparticle friction from the use of high aggregate volumes and large nominal maximum aggregate size, with flow enhanced for material extrusion by vibration. Granular physics was applied to concrete mixture design …