Architecture Commons^™

Coating Compositions And Methods For Using The Same, Fateme Rezaei, Thomas P. Schuman, Glenn C. Morrison

Patents

Coating compositions and methods for using the same are disclosed. The coating compositions can include an aminosilica adsorbent. The coating compositions can adsorb CO2.

The Suitability Of Demand-Controlled Sensor Based Ventilation Systems In Retrofit Dwellings - A Longitudinal Study., Seamus Harrington, Mark Mulville

Conference papers

A fabric-first approach to dwelling retrofit results in increased airtightness, therefore there is an obligation to ensure that the upgrades do not lead to poor indoor air quality (IAQ) resulting from inadequate ventilation. The sensor-based demand-controlled ventilation (SBDCV) under review seeks to provide fresh air for breathing and to dilute and exhaust pollutants and odours. This system modulates the ventilation rate over time based on relative humidity levels and/or presence detection and considers that the level of ventilation provided is sufficient to control the concentration of all other indoor air pollutants, including those that are not a result of human …

Analytical And Numerical Behavior Of Double Composite Steel Bridges, Emad M. Hassan, Hussam Mahmoud

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Steel plate girders are considered a viable solution for the construction of medium- to long-span bridges. Despite their many advantages, various concerns have been raised regarding their maintenance due to the potential of fatigue crack initiation at welded details, accelerated corrosion in thin webs, and trapped debris around stiffeners. The use of rolled beams, on the other hand, can be very beneficial because they require much less maintenance. However, they are limited in size, which imposes constraints on their use to relatively short-span bridges due to deflection requirements. In this study, the behavior of the double composite superstructure system was …

Editorial: Ultra-High Performance Concrete: Computation And Simulation Methods, Xinpeng Wang, Yitong Ma, Dongshuai Hou, Hongyan Ma, Yue Zhang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.

Field Reconnaissance And Observations From The February 6, 2023, Turkey Earthquake Sequence, Gulen Ozkula, Robert K. Dowell, Tugce Baser, Jui Liang Lin, Ozgun A. Numanoglu, Okan Ilhan, C. Guney Olgun, Cheng Wei Huang, Tunc Deniz Uludag

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

On February 6, 2023, a sequence of earthquakes hit Kahraman Maras, Turkey, with magnitudes of M w = 7.8 and 7.5, at 4:17 am and 1:24 pm local time, respectively. According to the records, the M w = 7.8 event was the biggest earthquake since the 1939 Erzincan earthquake of the same magnitude and second-strongest recorded after the 1668 North Anatolia Earthquake. However, it was the most devastating earthquake in the history of Turkey in terms of structural and geotechnical damage and fatalities caused by this. The objective of this article is to explore the aftermath of this major seismic …

Nucleotide Detection Mechanism And Comparison Based On Low-Dimensional Materials: A Review, M. Mustafa Azeem, Muhammad Shafa, Muhammad Aamir, Muhammad Zubair, Basma Souayeh, Mir Waqas Alam

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The recent pandemic has led to the fabrication of new nucleic acid sensors that can detect infinitesimal limits immediately and effectively. Therefore, various techniques have been demonstrated using low-dimensional materials that exhibit ultrahigh detection and accuracy. Numerous detection approaches have been reported, and new methods for impulse sensing are being explored. All ongoing research converges at one unique point, that is, an impetus: the enhanced limit of detection of sensors. There are several reviews on the detection of viruses and other proteins related to disease control point of care; however, to the best of our knowledge, none summarizes the various …

Measurement Of Volumetric Deformation, Strain Localization, And Shear Band Characterization During Triaxial Testing Using A Photogrammetry-Based Method, Sara Fayek, Xiong Zhang, Xiaolong Xia, Qingqing Fu, Jeffrey D. Cawlfield

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Triaxial Testing Has Been Routinely Used as a Standard Laboratory Test that Allows Correct Determination of Soil Characteristics. Previously the Volumetric Strain of the Triaxial Specimen Was Considered to Be Uniformly Distributed Along with the Specimen during the Isotropic and Deviatoric Loading. Although This Assumption Might Hold True under Isotropic Loading, the Effects of Restrained Ends and Disturbance during the Procedures of Specimen Installation and Testing Can Cause Nonuniform Strains throughout the Whole Specimen. This Paper Investigates the Effects of Specimen Preparation and Misalignment on the Strain Uniformity Along with the Soil Specimen during Triaxial Testing. a Series of Consolidated …

Efficient And Accurate Coded Target Decoding For 3d Reconstruction Of Soil Specimens In Triaxial Test, Xiaolong Xia, Xiong Zhang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Coded Targets Have Been Widely Used for Solving the Corresponding Problem in Photogrammetry for High-Accuracy Three-Dimensional Measurements. Accurate and Efficient Recognition and Identification of Coded Targets Are of Great Importance in Coded Target-Based Photogrammetry. in This Paper, an Efficient and Accurate Method for Coded Target Decoding Was Developed. in This Method, Blob Analysis Was Performed to Recognize the Coded Targets. Then, Image Processing, the RANSAC Algorithm, and the Interpolation Technique Were Applied Respectively to Decode the Coded Targets, Identify Falsely Identified Coded Targets, and Recover Missing Coded Targets. Interpolation Was Also Performed on the Membrane, Which Can Significantly Increase the …

Prediction Of Dynamic Mechanical Behaviors Of Coral Concrete Under Different Corrosive Environments And Its Enhancement Mechanism, Jingjie Wei, Boyuan Cheng, Lixiao Li, Wu Jian Long, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The marine structures are usually exposed to dynamic loadings within short periods and chemical attacks, resulting in severe dynamical damage or failure to concrete structures. The study of the time-dependent changes in the dynamic mechanical behavior of coral concrete under different corrosive environments and low-frequency waves is limited. For the safety and reliable use of coral concrete in the marine environment, different corrosion environments (chloride ions, sulfate ions, and mixed chloride-sulfate ions) and low-frequency waves (0.5–2.0 Hz) were designed to evaluate the dynamic properties of concrete. A model considering the effect of corroded age is formulated to predict the damping …

Key Factors Affecting Labor Productivity In Offsite Construction Projects, Rayan H. Assaad, Islam H. El-Adaway, Makarand Hastak, Kim Lascola Needy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Offsite construction has been shown to possess many advantages and benefits in dealing with the construction industry's challenges, which include poor labor productivity. Nevertheless, all previous productivity-related research studies have focused mainly on factors impacting labor productivity in traditional stick-built construction methods. This paper filled this knowledge gap by following a multistep interrelated research methodology. First, a research team of 19 construction professionals and academics developed and distributed an industry survey to (1) quantify the likelihood of occurrence and relative impact of risk factors that adversely impact labor productivity in offsite construction projects; (2) identify and prioritize key risk factors …

Identifying Design-Build Decision-Making Factors And Providing Future Research Guidelines: Social Network And Association Rule Analysis, Ramy Khalef, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

There is a dire need to rebuild existing infrastructure with strategic and efficient methods. Design-build (DB) becomes a potential solution that provides fast-tracked delivery as a more time and cost-efficient project delivery method. Past research studied factors influencing DB but without providing a holistic analytic approach. This paper fills this knowledge gap. First, a systematic literature review is performed using the preferred reporting items for systematic reviews and meta-analyses techniques, and a set of factors affecting DB projects are then identified and clustered, using k-means clustering, based on the whole literature discussions. Second, a graph theory approach, social network analysis …

Assessing The Predictive Capability Of The Nno Ballistic Limit Equation For Low-Density Projectile Impact, William P. Schonberg

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The design of nearly all Earth-orbiting spacecraft includes some sort of added shielding that protects the spacecraft against impacts by meteoroids and orbital debris. The effectiveness of the shielding is typically assessed using ballistic limit equations (BLEs) that are developed using data from high-speed impact tests on key spacecraft components and elements. These equations predict whether or not a particular system or structural element will sustain a critical failure following a specific impact event. As such, they are essential components of spacecraft system design as well as any quantitative spacecraft risk assessments that may need to be performed as part …

An Insight Into The Effect Of Sharp And Round Edges On The Flow Field-A Cfd Simulation, Abid Hussain, Gao Puzhen, M. Mustafa Azeem, Muhammad Zubair, Muhammad Aamir, Muhammad Irfan Khaleed

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper presents a numerical investigation of pressure drop and distribution in a channel around a sharp edge and a disc that is connected to the base of a circular rod. We have employed computational fluid dynamics (CFD)-Fluent for the validation of our models. It was found that the edge sharpness of the disc influences the pressure drop., i.e. sharp edge has higher turbulence and pressure drop. We also observed that pressure drops in the case of the circular disc are less than that of the sharp edge. However, pressure drop has essentially the same values for both shapes after …

Internal Structure And Breakage Behavior Of Biogenic Carbonate Sand Grains, Elieh Mohtashami, C. Guney Olgun, Chenglin Wu, Tara Selly

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This Study Investigates the Mechanical Behavior of Biogenic Carbonate Sands from Puerto Rico at Grain-Scale Level. Micro-Computed Tomography Has Also Been Used to Get Insights on the Internal Structure of These Particles Before and after Loading. the Crushing Strength of These Particles Are Smaller Comparing to the Values Reported for Silica Sands. It Has Also Been Shown that These Particles Have Complex Internal Structure Including a Network of Pores Connected with Channels. This Study Also Demonstrates the Effect of Intragrain Structure of Biogenic Carbonate Sands and Shows How Internal Grain Structure Plays a Role on Particle Fracture.

Point Density For Soil Specimen Volume Measurements In Image-Based Methods During Triaxial Testing, Sara Fayek, Xiong Zhang, Javad Galinmoghadam, Jeffrey D. Cawlfield

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Discrete Measurement Targets Were Frequently Utilized in Image-Based Methods on the Specimen's Surface to Monitor the Soil Specimen during Triaxial Testing. However, the Required Density of Measurement Targets that Should Be Used in Triaxial Testing to Achieve Highly Accurate Volume Measurement Has Not Been Investigated. to overcome This Limitation, This Paper Presents a Parametric Study to Determine the Optimum Target/point Densities to Be Utilized on the Triaxial Soil Specimen Surface to Achieve the Desired Level of Volume Measurement Accuracy in Image-Based Methods. LiDAR Scanning Was Applied to Establish the "Ground Truth" Volume of the Specimen. the Effects of Deformation and …

Evaluation Of Thermal And Rheological Properties Of Phase Change Material-Incorporated Asphalt Mastic With Porous Fillers, Farshad Saberi Kerahroudi, Yizhuang David Wang, Jenny Liu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Incorporating phase change material (PCM) into paving materials can regulate the pavement temperature, improve the pavement durability, and mitigate the heat-island effects. In this research, porous fillers were used as the PCM carrier, and the thermal and rheological behaviors of the asphalt mastic with the PCM were evaluated. Two different carrier materials (diatomite and expanded perlite) and four types of PCMs were used in the study. The candidate filler, PCM, and proper blending ratios were determined based on the results of scanning electron microscope image analysis, the filter paper test, and the temperature sweep test. The thermal and rheological behaviors …

Building Services Engineering January/February 2023

Building Services Engineering

No abstract provided.

Cohort Comfort Models — Using Occupant’S Similarity To Predict Personal Thermal Preference With Less Data, Matias Quintana, Stefano Schiavon, Federico Tartarini, Joyce Kim, Clayton Miller

Research Collection College of Integrative Studies

Cohort Comfort Models (CCM) are introduced as a technique for creating a personalized thermal prediction for a new building occupant without the need to collect large amounts of individual comfort-related data. This approach leverages historical data collected from a sample population, who have some underlying preference similarity to the new occupant. The method uses background information such as physical and demographic characteristics and one-time onboarding surveys (satisfaction with life scale, highly sensitive person scale, personality traits) from the new occupant, as well as physiological and environmental sensor measurements paired with a few thermal preference responses. The framework was implemented using …

Cozie Apple: An Ios Mobile And Smartwatch Application For Environmental Quality Satisfaction And Physiological Data Collection, Federico Tartarini, Mario Frei, Stefano Schiavon, Xuan Yun Chua, Clayton Miller

Research Collection College of Integrative Studies

Collecting feedback from people in indoor and outdoor environments is traditionally challenging and complex to achieve in a reliable, longitudinal, and non-intrusive way. This paper introduces Cozie Apple, an open-source mobile and smartwatch application for iOS devices. This platform allows people to complete a watch-based micro-survey and provide real-time feedback about environmental conditions via their Apple Watch. It leverages the inbuilt sensors of the smartwatch to collect physiological (e.g., heart rate, activity) and environmental (sound level) data. This paper outlines data collected from 48 research participants who used the platform to report perceptions of urban-scale environmental comfort (noise and thermal) …

Higher-Order Effects In Biaxial Flexure Of Gfrp I-Section Beams, Zia Razzaq, Faridoon Z. Razzaq

Civil & Environmental Engineering Faculty Publications

A theoretical study of Glass Fiber Reinforced Polymer (GFRP) beams subjected to biaxial bending moments is presented with a focus on the influence of higher-order effects on maximum normal stresses. It is shown that the biaxial bending type of loading causes a dramatic increase in the maximum normal stress for a GFRP beam when induced torsional effects are included. The study demonstrates that the traditional first-order theory can grossly underestimate the maximum normal stress in a GFRP beam. Based on the numerical results presented using a higher-order theory which also accounts for induced warping normal stresses, the maximum normal stress …

2022 Scholarly Productivity Report, Missouri University Of Science And Technology

Civil, Architectural and Environmental Engineering Scholarly Productivity Reports

No abstract provided.

The Metaverse: A Virtual World In The Palm Of Your Hand, Ziad Doughan, Hadi Al Mubasher, Mustafa El Bizri, Ali Haidar

BAU Journal - Science and Technology

This paper explores the actual and future impact of the Metaverse as a virtual space. Thus, it focuses the probe on the technical challenges that face this everlasting emerging technology. Today, the Metaverse presents a digital environment to build collective architecture and historical heritage in a virtual space. In this digital world, the modeling and design methodology is based on individual archetypes that can puzzle new elements. Currently, traditional methods require change and adaptation in both the education and work market, especially due to the remote-work integration in the last few years. For example, many components are required to build …

Effects Of Bisphenol A And Nicotine On Cytochrome P450s In Brain And Liver Of Pregnant Rats, Mohammad Merii, Manal Fardon, Mahmoud Khalil

BAU Journal - Science and Technology

Bisphenol A (BPA), a widely used chemical, is associated with endocrine disruption through its interactions with the aryl hydrocarbon receptor (AhR). BPA crosses into the human body mostly through migration from plastic packaging into the daily diet. AhR regulates the expression of drug-metabolizing enzymes (DMEs), including numerous CYP450s, and mediates xenobiotic reactions. This study aims at examining how the expression of CYP450s expression is affected, in the brain and liver of pregnant rats, by exposure to BPA and nicotine. Pregnant female Sprague-Dawley dams were exposed to increasing doses of BPA; 0 (control), 50, 500, and 5000 g/kg/day , or in …

Concrete Mix Design Using Abrams And Bolomey Methods, Salem Abdelgader, Marzena Kurpinska, Hakim Abdelgader, Jamal Khatib

BAU Journal - Science and Technology

This research studied concrete design methods. To design concrete using two methods, including the Abrams law and the modified Bolomey method. Concrete with assumed compressive strength 25, 30, 35, 40, and 45 MPa was researched. The research was conducted in the laboratory using two types of samples: cubic 15x15x15cm for compressive strength tests and cylinders ϕ-15cm, h-30cm for the splitting strength tests using the Brazilian method.

The analysis of the cement content in the composition of 1m3 of the mixture showed very large differences depending on the calculation method used. The cement content calculated according to the Abrams method ranged …

Reduction Of Embodied Carbon In Buildings Through Use Of Low Carbon Strategies And Standardization And Enforcement Of Life Cycle Assessment, Bhargavi Sai Sudhakar

Master's Projects and Capstones

The building and construction industry is energy intensive and as of 2021, this industry is responsible for 37% of the total global greenhouse gas emissions. In previous studies of conventional buildings, the operational energy of a building contributed to 80% and the embodied energy contributed to 20% of the total life cycle energy. With increase in policies and standards that focus on reducing the operational energy, low energy and certified green buildings have emerged where the operational energy has considerably reduced. The relative and absolute share of embodied energy in these energy efficient buildings have increased due to excessive use …

Estimating Vehicle Infrastructure: Downtown Albuquerque, New Mexico, Zachery Phillip Baiamonte

Architecture and Planning ETDs

Cities have little knowledge about their parking infrastructure despite clear evidence that abundant parking has environmental, economic, and transportation consequences. The objective of this thesis is to illustrate the need to accurately estimate the area dedicated to vehicle infrastructure (parking lots and streets) within urban areas. I focused on a method that estimated the vehicle infrastructure area within the Downtown Core of Albuquerque, New Mexico, by cross-referencing geospatial cadastral data with minimum parking requirements. Three parking space types were identified: 1) parking in structures; 2) surface parking (parking lots and residential driveways); and 3) on-street parking. To illustrate the need …

Energy Efficiency Retrofit And Decarbonization Of Old And Historic Buildings In California, Daria Nikolaeva

Master's Projects and Capstones

Buildings are responsible for almost 40% of total global greenhouse gas emissions and the retrofitting of existing buildings is an essential part of solving the problem. About 75% of buildings in Californian were constructed before the first energy-efficiency building code was adopted in 1978. Old buildings are inefficient, responsible for large carbon footprints and must be retrofitted to stay on track with the state's climate targets. However, current policies do not require substantial changes and tend to favor historic preservation over energy efficiency, missing improvement opportunities. Recognizing the significance of carbon intensity, the 2019 California Energy Efficiency Action Plan shifted …

Applying Unsupervised Machine Learning Clustering Techniques To Early Childcare Soundscapes, Kenton Hummel, Erica E. Ryherd, Iason Konstantzos, Abbie Raikes

Durham School of Architectural Engineering and Construction: Faculty Publications

Early childhood is a critical time period for language, brain, cognitive, and social/emotional development. Out-of-home childcare is a normative, typical experience for millions of young children. Although Indoor Environmental Quality (IEQ) in K-12 settings has received recent, significant attention, the links between IEQ and children’s learning and development in early childcare settings is a less understood topic. This work focuses specifically on the sound aspect of IEQ in early childcare settings to better understand typical noise levels and occupant experience. Standard approaches to analyzing background noise will be presented alongside more detailed statistical analyses utilizing unsupervised machine learning clustering techniques. …

2022 - The Third Annual Fall Symposium Of Student Scholars

Symposium of Student Scholars Program Books

The full program book from the Fall 2022 Symposium of Student Scholars, held on November 17, 2022. Includes abstracts from the presentations and posters.

Use Of Precious Plastic Method Of Bricks For The Construction Of Tiny Homes, Haylie E. Tallon

Architectural Engineering

Precious Plastics, a Netherlands based company, created an open source project that can be used to create different objects from recycled plastics. The San Luis Obispo area has a large amount of recyclable plastic that is being treated as trash, adding to the pollution of the ocean and the air. This project is to determine the necessary steps to create plastic building blocks, using the Precious Plastic process, as a construction material for low-income, temporary housing. This report covers the process that was used to build two of the machines that will be used to create the bricks. This requires …