Architecture Commons^™

Sustainable Sensing With Paper Microfluidics: Applications In Health, Environment, And Food Safety, Sanjay Kumar, Jyoti B. Kaushal, Heow Pueh Lee

Durham School of Architectural Engineering and Construction: Faculty Publications

This manuscript offers a concise overview of paper microfluidics, emphasizing its sustainable sensing applications in healthcare, environmental monitoring, and food safety. Researchers have developed innovative sensing platforms for detecting pathogens, pollutants, and contaminants by leveraging the paper’s unique properties, such as biodegradability and affordability. These portable, low-cost sensors facilitate rapid diagnostics and on-site analysis, making them invaluable tools for resource-limited settings. This review discusses the fabrication techniques, principles, and applications of paper microfluidics, showcasing its potential to address pressing challenges and enhance human health and environmental sustainability.

Reconstruction Of The Neglected: Bringing Life Back To The Old Powerhouse, Zoe A. Macmillan

Architectural Engineering

The Powerhouse is the oldest extant structure on Cal Poly campus and is currently abandoned. Built in 1910, it was in use as a power supply for Cal Poly Campus until the 1940s. Then, the School of Architecture and Environmental Design was granted permission to use it for class purposes. From 1967-1990 it was used as studio, guest lecture, and office space. In 1990 it was deemed structurally unstable and was left empty, slated for demolition. In 1993, a student lead movement placed it on the National Register of Historic Structures. Since then, it has been in a state neglect, …

Masonry Column Analysis Through Python, Ali Sherief Saleh

Architectural Engineering

This project serves as a study of Masonry Column Analysis and Design through the lens of the TMS 402 (22) Code: mimicking in-firm tools without using finite-element analysis. Chapter 9 of the TMS 402 (22) code provides the outline of the process taken to analyze these columns.

Investigation compares columns using the Python program to hand-calculations designs as to show additional capability that is lost due to approximation. PM-interaction for the columns is computed by a stress-strain approach. This report expands on the python design and approach to User Interface and inputs that are needed to analyze multiple datatypes with …

Initiative To Increase Student Engagement In Undergraduate Structural Analysis Course, Danielle Rose Flores, Diego Alberto Tomas

Architectural Engineering

This report documents the design of physical models, software aids, homework supplements, and industry-related activities to support the Learn by Doing philosophy in an undergraduate structural analysis lecture and laboratory course pairing offered at California Polytechnic State University, San Luis Obispo in the Architectural Engineering department. The ARCE 302 Structural Analysis and ARCE 352 Structural Computing Analysis courses cover the fundamentals of analyzing indeterminate structures, primarily focusing on theoretical concepts and calculations.

Prior to the development of any new course materials for this project, feedback from students who had previously taken the courses was collected via a survey in the …

Modeling And Design Parameter Optimization To Improve The Sensitivity Of A Bimorph Polysilicon-Based Mems Sensor For Helium Detection, Sulaiman Mohaidat, F. M. Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

Helium is integral in several industries, including nuclear waste management and semiconductors. Thus, developing a sensing method for detecting helium is essential to ensure the proper operation of such facilities. Several approaches can be used for helium detection, including based on the high thermal conductivity of helium, which is several times higher than air. This work utilizes the high thermal conductivity of helium to design and analyze a bimorph MEMS sensor for helium sensing applications. COMSOL Multiphysics software (version 6.2) is used to carry out this investigation. The sensor is constructed from poly-silicon and SiO₂ materials with a trenched …

Chioma Di Ulivo - Courtyard Canopy, Lilla J. Vigh, Claudia A. Geist

Architectural Engineering

Chioma di Ulivo ("Olive Tree Canopy") is the investigation and design of a canopy structure in the Engineering West (Bldg. 21) Hasslein Courtyard. The canopy will serve as a filtration system for both water and fallen olives from the olive tree on site, while providing a functional collaboration space for faculty and students alike. The goal of this project was to construct a quality diorama built by Lilla Vigh and Claudia Geist under the supervision of Dr. Craig Baltimore.

Polypropylene As Partial Fine Aggregate Substitute In Concrete, Samuel E. Royston, Chrisitan G. Achkar, Nicholas B. Tabarez

Architectural Engineering

The objective of this project is to discover a structurally effective method in repurposing recyclable plastic waste through its partial substitution for traditional fine aggregate in concrete.

Results obtained from analysis indicate a 25 percent compressive strength reduction with polypropylene at a 10 percent partial substitution for total sand content. This material successfully performed as an alternative, presenting a ductile mode of failure.

Three material alternatives - polypropylene, polyethylene, and rubber - were substituted for a percentage of sand. These materials underwent concrete cylinder crushing tests to determine their ultimate crushing strength, with the intent of identifying the most effective …

The Wall Group, Richard Antablin, Sara Engmyr, Michelle Griffith, Jora Leigh, Jesse Rainsdon

Architectural Engineering

This project aimed to design and construct an art wall in Poly Canyon to deter graffiti on existing structures and provide a designated area for student expression. However, after prolonged iterative revisions, it became evident that the project was significantly behind the original timeline.

It was recommended that the wall proposal be submitted for future student implementation. Instead of constructing the wall, an alternative course of action was proposed: restoring an existing structure in Poly Canyon to provide the desired hands-on experience.

After careful consideration, the Techite Bridge was selected for restoration. The proposed plan involves thorough cleaning, repairing chipped …

Smith Property Pre-Engineered Metal Barn, Trent Arjay Olmstead

Architectural Engineering

The Smith Residence Barn is a pre-engineered metal building designed to provide additional storage and workspace. The Architectural design was created by the Nunno Corporation, a San Luis Obispo based steel building general contractor. The soils report was created by Mid-Coast Geotechnical, INC. and the report’s conclusions were used for determining site conditions related to the foundation and lateral force system design. The structural calculations and plans were created by Trent Olmstead and reviewed by Brian Marc-Aurele, SE and Chris Murphy, SE. All calculations were done in accordance with the 2022 CBC, ASCE 7-16, 2023 AISC, ACI 318-19, and AISI …

Earning Engagement As A Graduate Student Instructor, Matthew Sloss

Architectural Engineering

One of the key benefits of a Cal Poly education is access to experienced instructors in a small classroom setting. In my final quarter at Cal Poly, I had the opportunity to glance behind the curtain and fill the significant shoes of an instructor of an introductory structural statics class. What initially was a chance to lend a hand to the department by sharing my limited experience turned into a thorough exploration of what it means to be productively engaging and of how to utilize the underrealized power of asking questions in the classroom setting. This report documents my experiences …

Cardboard Concrete Column Formwork, Danny Shrestha, Joelle Schalesky

Architectural Engineering

This project is an exploration of cardboard as a potential material for construction formwork for concrete columns. Multiple material tests were conducted to explore the behavior of cardboard and concrete. Multiple specimens of cardboard were tested for modulus of elasticity, moment of inertia, and tensile strength. Concrete was tested for its apparent lateral fluid pressure under vibration. Cardboard formwork was then designed and constructed based on these tested behaviors. The final design of the formwork consisted of folding cardboard sheets lined with hardboard, supported by wood studs, and tied by plastic banding straps.

Ultimately, two concrete columns―8' and 10' in …

Ace Mentor Program - Central Coast Chapter, Brayden Samuel Groshart

Construction Management

For my senior project, I established a chapter of the ACE (Architecture, Construction, and Engineering) Mentor Program in San Luis Obispo, California. This program provides high school students with hands-on experience and exposure to careers in the architecture, construction, and engineering industries. The program spanned eight weeks, balancing theoretical knowledge and practical application. The curriculum began with sessions on the fundamentals of architecture, engineering, and construction. In order to expose the students to real world practices, we organized tours of an architecture firm, an engineering firm, and an active construction site. These visits allowed students to engage with professionals, observe …

Architecture As A Carbon-Based Practice, Qixin Yu

Masters Theses

Carbon serves as both a silent protagonist and a looming antagonist in the narrative of architecture, shaping not only the physical structures we inhabit but also the ecological legacy we leave behind.

Centuries of human exploitation of the environment have led to climate and material crises. Shifting this dynamic requires action at micro (matter), meso (material), and macro (materiality) levels. Biogenic materials offer significant potential for carbon sequestration and present opportunities for the building industry to collaborate with nature rather than merely extract from it.

This thesis establishes a research and manufacturing practice that prioritizes material innovation, carbon sequestration, environmental …

The Impact Of Outdoor Thermal Comfort On Users’ Walkability: Study Case In Al Ain Square, Al Ain City, Uae, Alyazia Saeed Alnehayan

Theses

Living in a hot dry arid climate limits the walkability of its inhabitants. The excessive heat and dryness of the weather undoubtedly make walking a less tempting, encouraging, and pleasant choice for getting around the city. For that reason, this master thesis analyzes the various strategies used to enhance outdoor thermal comfort. Outdoor thermal comfort is controlled by numerous factors, including street and building orientation, vegetation, shading devices, and water bodies. The purpose of this study is to examine the relationship between walkability and UTCI values (universal thermal comfort index) in the context of Al Ain Square, a neighborhood in …

What Does Water Want?, Julia Woznicki

Masters Theses

This thesis begins with an exploration of our relationship with water at multiple scales, from microscopic study of desert moss to macroscopic research of freshwater resources. It evolves to embody a methodology of holistic, bioregional design that interweaves systems of ecology, economy, material landscape, and reconsideration of temporality in our built environment. This project also explores how that methodology may adapt between the Global North and the Global South.

No new plastic has been used in the process of this thesis. Material innovation using hemp hurd guides the exploration of how biomimetic principles can be achieved not only through form …

3d Printing Of Fiber-Reinforced Calcined Clay-Limestone-Based Cementitious Materials: From Mixture Design To Printability Evaluation, Haodao Li, Jingjie Wei, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Sustainability and limitations in embedded reinforcement are the main obstacles in digital fabrication with concrete. This study proposed a 3D printable fiber-reinforced calcined clay-limestone-based cementitious material (FR-LC3). The binder systems incorporating calcined clay (CC) and limestone filler (LF) were optimized by determining the flow characteristics and water retention ability of the paste. The effect of fiber volume on the key fresh and mechanical properties of the fiber-reinforced mortars made with the optimized binder was evaluated. A combination of offline assessments and inline printing were employed to investigate the printability of the FR-LC3 with various binder systems and viscosity-modifying admixture (VMA) …

Restoration Of The Cantilever Deck In Poly Canyon, Calvin S. Morgan, Calvin P. Vigeant, Roger G. Biddle

Construction Management

This interdisciplinary project aims to restore the Cantilever Deck in the Experimental Structures Laboratory back to an operational condition. As of Spring 2023, the deck has fallen into a state of disrepair and has been deemed structurally unsound by the university. The structural disrepair is concentrated around the wooden beams underneath the deck, but the handrails and overall color of the assembly have also fallen to levels deemed undesirable. The Restoration will remedy all these issues as well as guarantee that our repairs will last long into the future. This project is an interdisciplinary effort, the team consists of ARCE …

Application Of Multidisciplinary Community Resilience Modeling To Reduce Disaster Risk: Building Back Better, Wanting "Lisa" Wang, John W. Van De Lindt, Blythe Johnston, P. Shane Crawford, Guirong Grace Yan, Thang Dao, Trung Do, Katie Skakel, Mojtaba Harati, Tu Nguyen, Robinson Umeike, Silvana Croope, Andre R. Barbosa

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

From december 10 to december 11, 2021, a deadly tornado outbreak struck across several states in the us, including arkansas, illinois, kentucky, and tennessee. This tornado outbreak resulted in at least $3.9 Billion in damage, more than 90 fatalities, and hundreds of injuries. Mayfield, kentucky, a small city in the eastern united states, was hit by a long-track tornado rated as an enhanced fujita 4 (ef4) scale and was one of the communities most heavily damaged during the tornado outbreak. Following the 2021 tornado event, an analysis was performed in the interdependent networked community resilience modeling environment (in-core) for the …

Design With, Not For, Local Community: Utilizing E- Participation Tools In The Design Of Socially Sustainable Vertical Emirati Public Housing, Omar Sherzad Shareef

Theses

Few years ago, local and federal governments in the UAE started to design and develop vertical public housing for Emirati residents as a new public housing typology that is believed to be more environmentally sustainable. Dibba Al-Hisn Housing Scheme in Sharjah and Al-Ghurfa Project in Al-Fujairah, are two recently developed vertical Emirati public housing projects developed by Sharjah Housing Directorate and Sheikh Zayed Housing Program (SZHP) respectively. Both projects, have been professionally designed, however, the residents’ opinions were not considered in the design process. Therefore, the main objective of this research is to explore the potentials of utilizing the advanced …

Son Care Foundation – Lean To Shade Structure Design And Construction, Ryan Joseph Mccann

Construction Management

This paper discusses the design and construction of a lean-to-shade structure built for the Son Care Foundation in San Luis Obispo. The Son Care Foundation is a nonprofit organization that raises guide dogs for veterans and first responders with PTSD. This shade structure is 16 feet long and 6 feet wide, its height slopes from 9 feet in the front down to 8 feet in the back creating a roof pitch of 2:12. The sheet metal roof also has an overhang of approximately 1 foot. As requested by the client, the shade structure was designed to fit the aesthetic of …

Construction Of Lightly Reinforced Concrete Shear Wall And Footings, Luke Jackson Method

Construction Management

This paper details the construction of two cast in place foundations as well as a lightly reinforced cast in place wall. The project, located inside the high bay, provides the Architectural Engineering (ARCE) department with an opportunity to test Fiber Reinforced Polymer wrap as a retrofitting option for walls dating back to pre-1980s. Due to site conditions, and project design, this project required extensive planning and communication within our team, faculty advisors, and shop technicians. This paper will discuss the phasing of construction and procurement of material that was required for the completion of this project. It also aims to …

Performance Of Co2-Cured Alkali-Activated Blast-Furnace Slag Incorporating Magnesium Oxide, Yubin Jun, Seong Ho Han, Jae Hong Kim

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study investigated characteristics of alkali-activated slags incorporating magnesium oxide (MgO) subjected to CO₂ curing. The samples were prepared by adding 2%, 5%, and 10% MgO to the total binder mass. The mixture was activated with potassium hydroxide (KOH) and cured in a CO₂ incubator for 3 days. The compressive strength of the MgO-incorporated CO₂-cured alkali-activated slag was higher than that of the conventional alkali-activated slag at all ages up to 28 days. No reduction in the strength was observed over time. The enhanced strength was independent of MgO content. Combined X-ray diffraction with thermogravimetric analysis …

Daylighting In Buildings: Investigating The Relationship Between Daylight Levels And Building Compactness In Various Contemporary Architectural Types. [Efficient Typology Classification], Andrew Welch, Ermal Shpuza Phd

Symposium of Student Scholars

One of the key ways of improving the energy efficiency of a building is to enhance the daylight levels and reduce the need for artificial lighting. Good daylight levels are also associated with increased productivity and the well-being of a building's occupants. Daylight levels are often a direct function of the floorplate depth, where locations near the windows receive more daylight, and those deep inside the buildings receive less. As a result, shallow floorplates and elongated buildings are usually related to higher daylight levels. However, shallow buildings that have more natural light are also associated with greater construction costs due …

Advancing Simultaneous Extraction And Sequential Single-Particle Icp-Ms Analysis For Metallic Nanoparticle Mixtures In Plant Tissues, Lei Xu, Xingmao Ma, John Yang, Joel G. Burken, Paul Ki-Souk Nam, Honglan Shi, Hu Yang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Engineered Nanoparticles (ENPs) Have Been Increasingly Used in Agricultural Operations, leading to an Urgent Need for Robust Methods to Analyze Co-Occurring ENPs in Plant Tissues. in Response, This Study Advanced the Simultaneous Extraction of Coexisting Silver, Cerium Oxide, and Copper Oxide ENPs in Lettuce Shoots and Roots using Macerozyme R-10 and Analyzed Them by Single-Particle Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). Additionally, the Standard Stock Suspensions of the ENPs Were Stabilized with Citrate, and the Long-Term Stability (Up to 5 Months) Was Examined for the First Time. the Method Performance Results Displayed Satisfactory Accuracies and Precisions and Achieved Low Particle Concentration …

Chloride Binding Mechanism In Seawater-Mixed Uhpc, Wei Zhang, Dawei Ding, Mengmeng Li, Tiao Wang, Hongyan Ma, Binmeng Chen, Hongxing Hu, Jizhou Chen, Xiaomin Liu, Dongshuai Hou

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The rapid development of marine concrete structures and the sharp shortage of freshwater resources contribute to the wide investigation of seawater-mixed ultra-high-performance concrete (swuhpc). However, few studies have investigated the chloride ions (cl-) binding mechanism of swuhpc. Herein, the chloride binding experiments and molecular dynamics (md) simulation were carried out to reveal the physically and chemically bound cl- mechanisms of swuhpc. The results of the experiments clearly demonstrate that the addition of silica fume (sf) led to a significant decrease in the capacity of cl- binding. Conversely, the incorporation of metakaolin (mk) resulted in a marked increase in the content …

Urban Mixed Income, Mixed Use Transit Orientated Design A Precast Prefabricated Modular Design Solution To Atlanta's Housing Affordability Crisis, Taharka Askia Muhammad

Bachelor of Architecture Theses - 5th Year

This thesis will focus on urban housing affordability with an emphasis on quality mixed income, mixed use, transit orientated housing development (TOD). The primary goal is to provide an adequate number of affordable housing units to allow diversity and inclusion for residents of lower income in nearby communities or otherwise provide greater housing affordability overall. This research aims to propose new construction and creative innovations with precast, prefabricated modular architecture which will take advantage of cost offset strategies, lower cost of construction, efficiency, and speed of construction. The design phase of this thesis will develop a design proposal for the …

Safe Passage, Tenzin Senge

Bachelor of Architecture Theses - 5th Year

After the Cultural Revolution of 1959 in China which led to the occupation of Tibet, the people of Tibet suffered the loss of homes and were stripped away from their socio-cultural ethos. As displaced Tibetans, the next generations will grow up without a nation, their self-identity and live with uncertain future. To this day, thousands of Tibetans are fleeing into neighboring countries every year by crossing the treacherous (cold freezing) Himalayas mountains with great hardship, even the most experience hikers find this task challenging. Issues arise for these refugees trying to escape, and questions tend to pile up about the …

The Art Of Experience: Changing Architectural Designs Through The Perception Of Light, Brett Hembree

Bachelor of Architecture Theses - 5th Year

We are constantly surrounded by and inhabiting the built environment. Architecture can affect someone’s mood in the most subtle of ways. The spaces we inhabit have an impact whether you are aware of it or not. Peter Zumthor said, "Architecture is a service, a process, a way of building and leaving the world a little better for our presence." The question becomes, "How can we use lighting in architectural designs to create impactful experiences for those in the space?" My thesis explores how we design spaces and what strategies can be implemented to influence the viewers’ perception. We are shaped …

Utilizing Biomimicry To Design Sustainable Architecture, Virginia Hammond

Architecture Undergraduate Honors Theses

Nature has an integral relationship with architecture and serves as a sustainable role model and inspiration for designers. The process of biomimicry in architecture has the potential to produce more sustainable design solutions and foster a connection between humans and nature. Existing biomimetic design projects have varying strengths and weaknesses as examples of the process. Utilizing guidelines and references from key leaders in biomimetic design consultancy (Biomimicry 3.8), selected case studies are assessed for their ability to demonstrate the benefits of this design strategy. Using these evaluations, the case studies are diagrammed and critiqued to determine how new projects could …

Spatial Hearing In Simulated Reverberant Classroom Environments, Gabriel Seth Evan Weeldreyer

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Spatial hearing provides access to auditory spatial cues that promote speech perception in noisy listening situations. However, reverberation degrades auditory spatial cues and limits listeners’ ability to utilize these cues for segregating target speech from competing babble. Hence, spatial unmasking—an intelligibility benefit from a spatial separation between a target and masker—is reduced in reverberant environments as compared to free field. This work tests the hypothesis that interaural decorrelation, the result of increasing reverberation, will broaden the perceived auditory source width with a cascading effect of reduced auditory spatial acuity and subsequently poorer spatial unmasking. To understand the perceptual consequences of …