Architecture Commons^™

Using The Hyatt Regency Skywalk Collapse Case Study In Engineering Education., John W. Lawson, Pamalee A. Brady

Architectural Engineering

To this day, the 1981 skywalk collapse in the Kansas City Hyatt Regency resulted in the worst loss of life from a structural engineering mistake in United States history. While many important engineering lessons can be drawn from this disaster, it is just as important to recognize the broader lessons learned in the design and construction process as a whole that can be successfully brought into the classroom. Numerous organizations have undertaken the task of envisioning how engineering education can meet the demands of the future. ABET’s baccalaureate degree accreditation criteria, ASCE’s Body of Knowledge and Body of Knowledge 2 …

Stochastic Hybrid Embodied Co2-Eq Analysis: An Application To The Irish Apartment Building Sector, Adolf Acquaye, Aidan Duffy, Biswajit Basu

Articles

Although embodiedCO2-eq analysis has seen recent developments as evident in the establishment of the ISO14040 and 14044 LCA standards, it is recognized that due to weaknesses in gathering data on product-related emissions,embodiedCO2-eq values are probabilistic. This paper presents a stochastic analysis of hybrid embodied CO2-eq in buildings to account for this weakness in traditional methods and, by way of example, applies it to an Irish construction-sector case study. Using seven apartment buildings, 70,000 results are simulated with Monte Carlo analysis and used to derive probabilistic and cumulative embodied CO2-eq intensity distributions for apartment buildings in Ireland. A Wakeby distribution with …

Impacts Of Static Pressure Reset On Vav System Air Leakage, Fan Power And Thermal Energy- Part 1: Theoretical Model And Simulation, Mingsheng Liu, Jingjuan Feng, Zhan Wang, Lixia Wu, Keke Zheng, Xiufeng Pang

Durham School of Architectural Engineering and Construction: Faculty Publications

As for a variable air volume (VAV) System, the air duct static pressure is a typical control variable maintained by modulating supply fan speed. The static pressure equals to the summation of the duct pressure loss downstream of the sensor to the terminal box and box inlet static pressure. Typically, the air duct static pressure is set as a constant set point based on the system design information and sensor location. However, under partial load conditions, the terminal dampers have to be closed more since the required airflow which directly leads to much less pressure loss. This the static pressure …

Application Of Wireless Sensor Network (Wsn) Technologies In Optimal Static Pressure Reset In Variable Air Volume (Vav) System, Keke Zheng, Haorong Li, Huojun Yang

Durham School of Architectural Engineering and Construction: Faculty Publications

Optimization of the static pressure reset is always critical in the pursuit of maximum savings of fan power and thermal energy consumption in a VAV system. This paper theoretically investigated three static pressure reset methods, i.e. VAV terminal unit damper position based, outside air temperature based and air flow based, and proposed an optimal static pressure reset method. Subsequently, hourly simulations of a building in Omaha, Nebraska, USA, was implemented and validated that the VAV system with the optimal reset method could consume the least fan energy without sacrificing thermal comfort. Furthermore, in consideration of typical advantages or wireless technologies …

Economizer Control Using Mixed Air Enthalpy, Jingjuan Feng, Mingsheng Liu, Xiufeng Pang

Durham School of Architectural Engineering and Construction: Faculty Publications

Enthalpy economizer can theoretically save more energy than temperature based economizer.  However, the requirement of outdoor air humidity measurement in the traditional enthalpy economizer control made it impossible.  A novel control sequence using mixed air enthalpy is developed in the paper.  Both theoretical and experimental investigation shows that humidity measurement in mixed air duct is very reliable, and the proposed method can achieve true enthalpy economizer saving.  A case implementation shows 15.7% more energy saving than temperature based economizer in Omaha, NE.

Increasing Efficiency In Boundary Security With Wireless Sensor Networks And Geospatial Information Systems Using Homology Theory, Luis Berumen^, Eric Chaidez^, Hamide Dogan*, Jose Gerardo Rosiles**

COURI Symposium Abstracts, Spring 2011

As part of an institutional investigation, we attempt to address the challenges the US customs and Border protection agency faces in the El Paso region. Our research focuses on defining a system for the surveillance application, and the use of mathematical models employed to achieve a greater efficiency of such architecture. With the use of the defined system, we apply homology theory through the algebraic process of topology, to accomplish an independent coordinate-free based system, which covers the surveillance area, with lesser quantity of sensor nodes. Our architecture makes the use of an operating system for wireless sensor networks; TinyOS, …

Asce 7–05 Design Rule For Relative Strength In A Tall Buckling-Restrained Braced Frame Dual System, Lisa J. Aukeman

Master's Theses

In mid- to high-rise structures, dual systems (DS) enable a structural designer to satisfy the stringent drift limitations of current codes without compromising ductility. Currently, ASCE 7-05 permits a variety of structural systems to be used in combination as a dual system yet the design requirements are limited to the following statement: Moment frames must be capable of resisting 25% of the seismic forces while the moment frames and braced frames or shear walls must be capable of resisting the entire seismic forces in proportion to their relative rigidities.

This thesis assesses the significance of the 25% design requirement for …

Universal Engineering Programmer – An In-House Development Tool For Developing And Testing Implantable Medical Devices In St. Jude Medical, Khoa Tat Do

Master's Theses

During development and testing of the functionality of the pacemaker and defibrillator device, engineers in the St. Jude Medical Cardiac Rhythm Management Division use an in-house development tool called Universal Engineering Programmer (UEP) to ensure the device functions as expected, before it can be used to test on an animal or a human during the implantation process.  In addition, some applications of UEP are incorporated into the official releases of the device product.  UEP has been developed and used by engineers across departments in the St. Jude Medical Cardiac Rhythm Management Division (CRMD).  This thesis covers the flexible and reusable …

Thermal Bridging - Understanding Its Critical Role In Energy Efficiency, Joseph Little, Beñat Arregi

Articles

Plane element heat loss[1] and thermal bridging[2] together constitute all the conduction heat loss (measured in W/K, watts per kelvin) through the thermal envelope[3] of a building. Perversely insulating the plane elements more and more without carefully dealing with junctions can lead to a significant increase in thermal bridging heat loss. This is often more significant in poorly thought-out energy-focused retrofits than in existing or new buildings.

Postearthquake Recovery Of A Water Distribution System: Discrete Event Simulation Using Colored Petri Nets, Ronaldo Luna, Nandini Balakrishnan, Cihan H. Dagli

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Planning and preparedness is essential for any resilient infrastructure system. Modeling and simulation give engineers and planners a better understanding of the system and help them make better decisions. the objective of this study is to demonstrate an improved model for the disaster restoration process by using a discrete event simulation approach. the study also aims to help improve the post-earthquake restoration process by simulating restoration curves. in this paper, colored Petri nets are used to model the system and to simulate its behavior. the resource allocation after a rare event such as an earthquake differs from the resource allocation …

A Virtual Supply Airflow Rate Meter In Rooftop Air Conditioning Units, Daihong Yu

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Virtual sensing technology aims to estimate difficult to measure, expensive, or new quantities by using multifarious mathematical models along with non-invasive and low-cost measurements. Such embedded intelligence is a key to improving the performance of building systems in terms of functionality, safety, energy efficiency, environmental impacts, and costs. Considering the progress that has been achieved over many various fields (e.g., process controls, automobiles, avionics, autonomous robots, telemedicine) within the last two decades, numerous intelligent features have been incorporated and enabled that would otherwise not be possible or economical.

To identify the potential opportunities and research/development needs of virtual sensing technology …

A Financial Impact Assessment Of Ld 1725: Stream Crossings, New England Environmental Finance Center, Muskie School Of Public Service

Water

This report looks at the potential financial impact of LD 1725 on the estimated 30,000 stream crossings in the State of Maine that would be affected by the law. Our research for this report included the analysis of nearly 2000 stream crossings and the data collection necessary for the development of extensive stream crossing replacement cost models. We found that the 1.2 bankfull requirements in LD 1725 would result in a 75% ‐ 250% increase in structure widths for stream crossing projects across the state. An upsize of this magnitude would increase the cost of replacing stream crossings statewide by …

A Financial Impact Assessment Of Ld 1725: Stream Crossings Presentation, New England Environmental Finance Center

Economics and Finance

This report looks at the potential financial impact of LD 1725 on the estimated 30,000 stream crossings in the State of Maine that would be affected by the law. Our research for this report included the analysis of nearly 2000 stream crossings and the data collection necessary for the development of extensive stream crossing replacement cost models. We found that the 1.2 bankfull requirements in LD 1725 would result in a 75% ‐ 250% increase in structure widths for stream crossing projects across the state. An upsize of this magnitude would increase the cost of replacing stream crossings statewide by …

An Adaptive Photovoltaic-Inverter Topology, Mahmoud Alahmad, Mohamed Amer Chaaban, Siu Kit Lau

Durham School of Architectural Engineering and Construction: Faculty Publications

A new inverter topology for Adaptive photovoltaic (PV) system is proposed. An improvement in the power generation of the system during different operating conditions is achieved. The proposed configuration provides flexible connection between the PV modules and the inverters to meet current conditions of PV array. Preliminary simulation results are provided for an adaptive PV array. Efficiency comparison between traditional PV system configurations is discussed. Potential improvement using the proposed adaptive configuration is sited.

Green And Sustainable Technologies For The Built Enviornment, Mahmoud Alahmad, Muhammad Zulfiqar, Hosen Hasna Hh, Hamid Sharif, Evans Sordiashie, Nasser Aljuhaishi

Durham School of Architectural Engineering and Construction: Faculty Publications

Energy conservation is among society’s greatest challenges, and the built environment has a concentrated impact on our natural environment, economy, and health. Fundamental understandings of how energy is consumed, monitored, and controlled are key prerequisites for an energy conservation process. This paper evaluates the effectiveness of real-time energy monitors (RTM) to influence behavior change in residential consumers. A methodology for remote identification of load types and the locations along the electrical circuitry where they (load) are being consumed is also presented. The load type and status (on, off, standby) are determined both remotely and in a non-intrusive manner using Non-Intrusive …

Combinatorics & Power Consumption, Mahmoud Alahmad, Wisam Nader

Durham School of Architectural Engineering and Construction: Faculty Publications

in this paper the power consumption possible combinations for a number of loads and a single power source are discussed. The proposed mathematical model depends basically on combinatorics to estimate how many ways are possible to operate different loads powered by a single power source. This paper takes into consideration the different conditions and limitations to operate n number of loads limited by their minimum and maximum values of power consumption. Four different cases of operations are discussed and modeled. A flowchart and a step-by-step method to do the calculations for a general case is also illustrated at the end …

A Novel Photovoltaic/Battery Structure For Solar Electrical Vehicles [Pvbs For Sev], Mahmoud Alahmad, Mohamed Amer Chaaban, Lana Chaar

Durham School of Architectural Engineering and Construction: Faculty Publications

In this paper, we propose a new flexible Photovoltaic/Battery charging Structure for Solar Electrical Vehicles (PVBS), where the interconnection of the system is dynamically changing based on current shading conditions across PV modules to provide intelligent system, as well as to provide flexibility, performance, and efficiency enhancement for the SEV. PVBS is expected to 1) provide a battery charging efficiency improvement over existing employed topologies; 2) provide new means to match the computing load with the PV system performance metrics shading and mismatches; 3) and provide elastic reconfigurable system expected to spur research advancements and innovations to make future SEV …

Lv-11-C031: Measured Levels Of Hospital Noise Before, During, And After Renovation Of A Hospital Wing, And A Survey Of Resulting Patient Perception, Cassandra H. Wiese, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

Acoustic conditions in hospitals can negatively influence a patient’s physical and psychological health. This paperreports on noise levels measured before, during, and after renovation of a hospital wing in an Omaha, Nebraska, facility thatregularly receives unsatisfactory noise scores on patient satisfaction surveys. Sound pressure levels were logged every 10seconds over four-day periods in three different locations: at the nurses' station, in the hallway, and in a nearby patient’sroom. The resulting data have been analyzed in terms of A-weighted equivalent sound levels (LAeq) as well as variousexceedance levels (Ln). Results indicate that sound levels did not change much due to the …

Non-Intrusive Electrical Load Monitoring And Profiling Methods For Applications In Energy Management Systems, Mahmoud Alahmad, Hosen Hasna Hh, Evans Sordiashie

Durham School of Architectural Engineering and Construction: Faculty Publications

"Phantom Loads" cause energy waste in homes and the built environment as a whole. Consumers spend more than $3 billion a year on "Phantom Load" in the United States alone. The goal of this paper is to conserve energy by increasing consumer awareness on their energy usage and reducing and /or eliminating phantom loads in the built environment. A further goal is to improve upon existing power distribution systems in the built environment with limited hardware additions to increase energy conservation. This paper investigates remote identification of load types and the locations along the electrical circuitry where they (load) are …

Industry-Experienced Graduate Student Program: Innovative Collaboration In Architectural Engineering At The University Of Nebraska–Lincoln, Clarence E. Waters, Steve Alvine, Michelle L. Eble-Hankins

Durham School of Architectural Engineering and Construction: Faculty Publications

In 2001, the Architectural Engineering Department at the University of Nebraska–Lincoln, along with industry partners, established an industry-experienced graduate student program. The program was developed to bring experienced design professionals to collaborate with the industry while pursuing a Ph.D. in architectural engineering. This program is designed to be mutually beneficial to industry partners, -graduate students, the University of Nebraska–Lincoln Architectural Engineering Department, and the building industry at large. The first doctoral candidate in the program graduated, and significant collaborative work was completed for the industry partner. All parties to this initial offering are pleased with the outcome and believe the …

Perceptions And Experiences Of Diverse Architectural Technology Students Learning Through Formative Feedback & Formative Assessment: A Multiple-Case Study, Catherine Prunty

Masters

Technological leaps along with increased numbers and greater student diversity is altering the higher education teaching landscape constantly. The academic's workload is escalating all the time, arising from resource constraints in a time of economic stringency. This places even more pressure on dealing with assessment rather than on enhancing learning. Despite evidence that supports formative assessment as being vitally important to students' learning, it is not widely appreciated among lecturers in higher education. As a result, lecturers under pressure, understandably, will maintain existing assessment and teaching systems rather than attempt to apply new techniques. Immeasurable hours, days or even weeks, …

The “Bim’S 4d+” Dimension: Real Time Energy Monitoring, Mahmoud Alahmad, Wisam Nader, Adam Brumbaugh, Yong Cho, Song Ci, Hamid Sharif, Jonathan Shi, Jill Neal

Durham School of Architectural Engineering and Construction: Faculty Publications

With the current trend towards Building Information Model (BIM), facility managers have a new tool for raising efficiency. This paper discusses the integration of the BIM software with a real-time monitoring (RTM) system, as a 4D+ dimension in BIM, to track the electrical usage at every location in a building. This ability could be invaluable in identifying what unnecessary loads are connected to a device and could be disconnected. This would result in elimination of needless loads and phantom loads during non-business hours, causing significant reduction in energy consumption. A prototype of the RTM was built and the results are …

Physical Impact Of Waterjet-Based Sediment Remediation On Benthic Organisms, Grace Harper, Andrew Curtis Elmore, Christopher Redell, Gavin Risley, Joel Gerard Burken

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Adding Activated Carbon to Sediments Has Been Shown to Be an Effective Means of Reducing the Bioavailability of Certain Contaminants. the Current State of the Practice is to Mechanically Mix Activated Carbon to a Target Concentration of 3 Percent at Depths of Approximately 30 Cm using a Rotovator or Similar Construction Equipment. Waterjets Have Been Used to Cut Hard Material using a Mixture of Water and an Abrasive. If Activated Carbon is Substituted for the Abrasive, Waterjets Have the Potential to Use Surface Injection as a Replacement for Mechanical Mixing during Sediment Remediation. a Perceived Benefit of Waterjet-Based Sediment Remediation …

Addressable And Energy Management System For The Built Environment (I), Mahmoud Alahmad, Hosen Hasna Hh, Evans Sordiashie

Durham School of Architectural Engineering and Construction: Faculty Publications

The increasing awareness for a cleaner earth has created more interests in the electric vehicle (EV) technology. Electric vehicles (EVs) will not only cause a reduction in our current greenhouse gas emissions, but also stop or reverse the trend at which our natural resources are being depleted. However, the introduction of the EVs into our societies will still require energy usage in the form of electricity. Integration of charging infrastructures will eventually be required in the built environment for these vehicles. This will add to the current energy consumption in the built environment which will mean more emission of CO2, …

Tracking The Use Of Leed® In Facilities For Higher Education, Shannon Chance

Articles

America’s 4391 institutions of higher learning own roughly 240,000 buildings according to The Carnegie Foundation for the Advancement of Teaching (2009) and the United States Green Building Council [USGBC] (n.d.). Most of these buildings’ designs reflect a time when energy was cheap and material abundant. Throughout the past century, building designs frequently ignored their surroundings, usurped energy at appalling rates, and did little to teach inhabitants respect for the environment

Sustainable Design Optimization Of Rural Houses In North China, Mingliang Li

Purdue Polytechnic Masters Theses

With the rapid economic development of China, the living standards in rural areas have been experiencing improvement over the past two decades. One important aspect of the improved living standards is housing, which has been transformed from traditional adobe or stone structures into modern brick and concrete ones. In the meantime, active heating and cooling systems are gradually being incorporated and residents are requiring more comfortable indoor air temperatures during cold winters and hot summers. However, most rural houses have no insulation in their exterior walls and roofs. The question is whether or not it is economically viable to build …

Optimization Of Energy Storage Systems In Hev's, Mahmoud Alahmad, Mohamed Amer Chaaban

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper introduces a novel battery model inspired by molecular structures mainly for applications in HEV’s. This novel 3-D adaptive battery topology shows potential for improvement in input and output performance as well as the charging/ discharging efficiency of batteries. The proposed topology provides flexible connections between battery cells to achieve different configurations of battery. A new switching matrix has been developed to achieve the required configurations. Preliminary simulations provide promising results for an adaptive 3-D battery configuration. Comparison between traditional battery configurations and the adaptive 3-D configuration is considered. A significant improvement in power curves is achieved by the …

A Web-Based Learning Module For Teaching Gis Within The Context Of Environmental Engineering, Sirjana Dahal, Richard H. Hall, Glenn Morrison, Seth Paul Lamble, Ronaldo Luna

Business and Information Technology Faculty Research & Creative Works

There is a Growing Need for Teaching Geographical Information Systems (GIS) in Engineering Disciplines, Such as Environmental. However, There Has Been Limited Focus on GIS in Undergraduate Programs, Since It's Difficult to Fit a GIS Class into the Large Number of Class Requirements Already Included in Engineering Curricula. the Purpose of This Research is the Evaluation of Web-Based Learning Module Created by a Multidisciplinary Team at a Midwestern Technological Research University, Which Allows Instructors to Integrate GIS Instruction into Existing Courses. This Module is One Part of a Large-Scale National Science Foundation Funded Project in Which GIS Modules Are Being …

Using Case Studies To Characterize The Broader Meaning Of Engineering Design For Today’S Student, Pamalee A. Brady, John W. Lawson

Architectural Engineering

Numerous organizations have undertaken the task of envisioning the education required to meet the engineering demands of the future. The ABET study EC2000, ASCE’s Civil Engineering Body of Knowledge and Body of Knowledge 2 and the National Academy of Engineering have documented the need to change engineering education from its historical focus on technical content knowledge to include greater emphasis on professional issues and to integrate engineering practice into education. To this end teaching methods such as project-based learning, and the use of case studies are being explored to address these broader learning outcomes. Case studies in particular facilitate telling …

Crossings, Noel Brady

Books/Book Chapters

Chapter concentrates on the bridges of Dublin’s river Liffey; their importance to the vitality of the city, its commerce and people. It also highlights the importance of crossings in the city linking and opening up new paths to growth and development.